PubMed Health⌕ Search

Biomedical subjects

Andrei S Batsanov

Publications and source records attributed to Andrei S Batsanov.

At least 19 recordsLinked to original sources
PubMed2006

Calix[6]arene derivatives selectively functionalized at alternate sites on the smaller rim with 2-phenylpyridine and 2-fluorenylpyridine substituents to provide deep cavities.

The synthesis is described of calix[6]arene derivatives 4, 9, and 14 functionalized at alternate sites on the smaller rim with 4'-(pyrid-2' '-yl)phenylmethoxy, (6'-phenylpyrid-3'-ylmethoxy), and {6'-[2-(9,9-di-n-hexylfluorenyl)]pyrid-3'-ylmethoxy} substituents, respectively. They were obtained by 3-fold reactions of 2-[4-(bromomethyl)phenyl]pyridine (3), 5-(bromomethyl)-2-phenylpyridine (8), and 5-(bromomethyl)-2-(9,9-di-n-hexylfluorenyl)pyridine (13) with the 1,3,5-trimethylether of the t-Bu-calix[6]arene in the presence of sodium hydride in THF in 56-75% yields. Detailed analysis of the 1H NMR spectra (including variable-temperature data for 4) has established that 4, 9, and 14 exist predominantly in the C3v cone conformation with minor Cs isomers also observed. The X-ray crystal structure of 4 reveals two molecules of similar cone conformation, with all three 4'-(pyrid-2' '-yl)phenylmethoxy substituents stretched in the axial direction. Molecule I has a dimeric capsule structure with (pyrid-2' '-yl)phenylmethoxy substituents of one molecule interpenetrating those of its inversion equivalent to form a deep enclosed intermolecular cavity, which contains a CH2Cl2 guest molecule. Molecule II forms no such pair: the intramolecular cavity is filled with solvent molecules.

Calixarenes↗
PubMed2006

Precision control of single-molecule electrical junctions.

There is much discussion of molecules as components for future electronic devices. However, the contacts, the local environment and the temperature can all affect their electrical properties. This sensitivity, particularly at the single-molecule level, may limit the use of molecules as active electrical components, and therefore it is important to design and evaluate molecular junctions with a robust and stable electrical response over a wide range of junction configurations and temperatures. Here we report an approach to monitor the electrical properties of single-molecule junctions, which involves precise control of the contact spacing and tilt angle of the molecule. Comparison with ab initio transport calculations shows that the tilt-angle dependence of the electrical conductance is a sensitive spectroscopic probe, providing information about the position of the Fermi energy. It is also shown that the electrical properties of flexible molecules are dependent on temperature, whereas those of molecules designed for their rigidity are not.

Journal Article↗
PubMed2006

Are terminal aryl butadiynes stable? Synthesis and X-ray crystal structures of a series of aryl- and heteroaryl-butadiynes (Ar-CC-CC-H).

The synthesis and isolation are reported of a range of terminal aryl- and heteroaryl-butadiynes (ArCC-CCH) 4a-h from 2-methyl-6-(aryl/heteroaryl)hexa-3,5-diyn-2-ol precursors. The stability of 4a-h in solution is concentration dependent: many of the derivatives can be stored as dilute solutions for several days or even weeks. The X-ray crystal structures have been obtained for five ArCC-CCH derivatives [Ar = 2-(9-fluorenonyl), 4-biphenyl, 2-pyridyl, 4-pyridyl, and 2-pyrazyl].

Journal Article↗
PubMed2006

Chelating N-pyrrolylphosphino-N'-arylaldimine ligands: synthesis, ligand behaviour and applications in catalysis.

Two families of variously-substituted N-pyrrolylphosphino-N'-arylaldimine ligands, 2-(aryl-N=CH)C4H3N-PR2 {R=Ph; R=Pri2N}, have been prepared from the corresponding pyrrolylaldimines . The donor characteristics/basicity of P-N-chelating and have been assessed using a combination of 31P{1H} NMR and IR spectroscopies through study of the magnitudes of 1JSeP for the phosphorus(V) selenides and , and measurement of nu(CO) for the complexes [RhCl(CO)(-kappa2-P,N)], respectively. The synthesis of the palladium(II) complexes [PdCl2(-kappa2-P,N)] was readily achieved from reaction of or with [PdCl2(MeCN)2] in CH2Cl2. X-Ray crystallographic studies of and confirm the chelating nature of the P-N ligands, which adopt a distorted 'envelope' conformation, and highlight the potentially significant steric demands of these metal scaffolds. Reaction of equimolar quantities of with [NiBr2(DME)] in MeCN afforded [NiBr2(-kappa2-P,N)], while the same reaction undertaken in CH2Cl2 with gave rise to the homoleptic bis(pyrrolatoimine) derivative [Ni{2-(mes-N=CH)C4H3N}2] in 45% yield, following P-N bond cleavage. Complex was characterised in the solid-state by X-ray crystallography. No identifiable metal-containing complexes could be obtained on reaction of with a variety of sources of Ni(II). The palladium dichloride complexes and proved inactive in combination with MAO or EtAlCl2 for ethylene polymerisation, and with methanesulfonic acid for CO/ethylene co-polymerisation. Contrastingly, the nickel complexes in combination with 4.5 eq. EtAlCl2 catalysed the formation of butenes and hexenes with moderate activity from ethylene at 1 bar.

Journal Article↗
PubMed2006

Extreme conformational constraints in pi-extended tetrathiafulvalenes: unusual topologies and redox behavior of doubly and triply bridged cyclophanes.

Doubly and triply bridged 9,10-bis(1,3-dithiol-2-ylidene)-9,10-dihydroanthracene (ex-TTF) derivatives have been synthesized. Key steps are the generation and macrocyclization reactions of ex-TTF-dithiolate reagents. The X-ray crystal structures of the doubly bridged cyclophanes 15 and 16 and the triply bridged system 23 show that the saddle-like conformation of the ex-TTF framework is enhanced by the short bridges between the dithiole rings. Unlike all previous ex-TTF derivatives (which display a single quasi-reversible two-electron oxidation wave, D0 --> D2+), cyclic voltammetry of the cyclophanes reveals two reversible, one-electron oxidation steps (D0 --> D*+ --> D2+), with differences between the half-wave potentials (E2(1/2) - E1(1/2)) of 0.22-0.26 V. The conformational changes and gain in aromaticity which drive the second oxidation process in unrestricted ex-TTF systems (including singly bridged cyclophanes) have been prevented by multiple bridging. The radical cation species gives rise to a very broad, low-energy band (lambdamax = 2175 and 2040 nm for 15 and 21, respectively), assigned to an intramolecular interaction. The steric constraints imposed by multiple bridging have become so extreme that the pi-framework of 15, 16, 21, and 23 exhibits remarkable optical and redox behavior which is not characteristic of ex-TTF systems.

Journal Article↗
PubMed2006

Remarkable interplay of redox states and conformational changes in a sterically crowded, cross-conjugated tetrathiafulvalene vinylog.

Derivatives of 9-[2-(1,3-dithiol-2-ylidene)ethylidene]thioxanthene have been synthesized using Horner-Wadsworth-Emmons reactions of (1,3-dithiol-2-yl)phosphonate reagents with thioxanthen-9-ylidene-acetaldehyde (5). Further reactions lead to the sterically crowded cross-conjugated "vinylogous tetrathiafulvalene" derivative 9-[2,3-bis-(4,5-dimethyl-1,3-dithiol-2-ylidene)-propylidene]thioxanthene (10). X-ray crystallography, solution electrochemistry, optical spectroscopy, spectroelectrochemistry, and simultaneous electrochemistry and electron paramagnetic resonance spectroscopy, combined with theoretical calculations performed at the B3LYP/6-31G(d) level, elucidate the interplay of the electronic and structural properties in these molecules. For compound 10, multistage redox behavior is observed: the overall electrochemical process can be represented by 10-->10(.+)-->10(2+)-->10(4+) with good reversibility for the 10-->10(.+)-->10(2+) transformations. At the tetracation stage there is the maximum gain in aromaticity at the dithiolium and thioxanthenium rings. Theory predicts that for 10, 10(.+), and 10(2+) the trans isomers are more stable than the cis isomers (by ca. 2-18 kJ mol(-1)), whereas for 10(4+) the cis isomer becomes more stable than the trans isomer (by ca. 25 kJ mol(-1)) [trans and cis refer to the arrangement of the two dithiole moieties with respect to the central ==C(R)--C(H)== fragment]. These data explain the detection in cyclic voltammograms of both trans and cis isomers of 10 and 10(.+) during the reduction of 10(4+) at fast scan rates (>100 mV s(-1)) when the cis-trans isomerization is not completed within the timescale of the experiment. The X-ray structure of the charge-transfer complex (CTC) of 10 with 2,4,5,7-tetranitrofluorene-9-dicyanomethylenefluorene (DTeF) [stoichiometry: 10(.+)(DTeF)(2) (.-)2 PhCl] reveals a twisted conformation of 10(.+) (driven by the bulky thioxanthene moiety) and provides a very rare example of segregated stacking of a fluorene acceptor in a CTC.

Journal Article↗
PubMed2006

The dihydrofuran template approach to furofuran synthesis.

Flash vacuum pyrrolysis of vinyl epoxides provides cis-dihydrofuran carboxylic esters in good yields and diastereoselectivities, which, on base-promoted epimerisation afford the complementary trans series. The compounds provide a viable template for a Lewis acid promoted cyclisation to provide the 2,6-diaryl-3,7-dioxabicyclo[3.3.0]octane core found in the furofuran series of natural lignans. This strategy is stereodivergent and can be controlled to provide the exo-exo, exo-endo or endo-endo stereochemistries. The approach has been exemplified in syntheses of the sesamyl furofurans (+/-)-epiasarinin and (+/-)-asarinin.

Cyclization↗
PubMed2006

Concise syntheses of tridentate PNE ligands and their coordination chemistry with palladium(II) : a solution- and solid-state study.

A straightforward methodology for the high-yielding synthesis of the di-functionalised phosphines {Ph2P(CH2)2NC4H8E, E = NMe (1), O (2), S (3)}via base-catalysed Michael addition is described. Reaction of the functionalised tertiary phosphines 1-3 with PdCl2(MeCN)2 affords complexes in which the ligands are bound in a tridentate fashion, namely [PdCl(kappa3-PNE)]Cl (6a, 8) as the predominant products. A kappa2-PN coordination mode was also identified crystallographically for ligand following its reaction with PdCl2(MeCN)2, which afforded [PdCl2(-kappa2-PN)] (6b) in ca. 5% yield. Conductivity studies of solutions of 6a are consistent with an ionic formulation, however the poor solubility of and precluded their study in a similar fashion. Analysis of bulk samples of [PdCl2(1)] (6) and [PdCl2(3)] (8) by 15N and 31P NMR spectroscopy in the solid state as consistent with exclusive tridentate binding of the PNE ligands. An X-ray crystallographic study has probed the coordination of in the unusual salt [PdCl(-kappa3-PNN)]2[Mg(SO4)2(OH2)4] (10) prepared by treating a methanolic solution of with excess MgSO4. No data could be obtained to support the transformation of 6a into 6b on addition of excess chloride. In contrast, 6a reacts regioselectively with the water-soluble phosphine Cy2PCH2CH2NMe3Cl to afford the cis-diphosphine complex cis-[PdCl(Cy2PCH2CH2NMe3Cl)(1-kappa2-PN)]Cl2 (9). Reaction of 1 with PdCl(Me)(COD) results in the formation of the kappa2-PN dichloride complex [PdCl(Me)(1-kappa(2)-PN)] (11). Attempts to prepare [Pd(Me)(MeCN)(-kappa2-PN)][PF6] (12) through reaction of 11 with NaPF6 in MeCN led to decomposition. Treatment of PdMe2(TMEDA) with 1 at low temperature initially affords [PdMe2(1-kappa2-NN)], which isomerises to afford [PdMe(2)(1-kappa(2)-PN)] (13); at temperatures greater than 10 degrees C complex 13 decomposes rapidly.

Journal Article↗
PubMed2006

Arene-perfluoroarene interactions in crystal engineering. XV. Ferrocene-decafluorobiphenyl (1/1).

The title crystal, [Fe(C5H5)2].C12F10, comprises infinite chains of alternating component molecules, linked through face-to-face contacts of nearly parallel cyclopentadienyl and pentafluorophenyl rings. The decafluorobiphenyl molecule has a crystallographic twofold axis and the Fe atom of the ferrocene molecule is on a crystallographic inversion centre, with both cyclopentadienyl rings disordered.

Journal Article↗
PubMed2006

Synthetic and structural studies on C-ethynyl- and C-bromo-carboranes.

A high-yield preparation of the C-monoethynyl para-carborane, 1-Me(3)SiC[triple bond]C-1,12-C2B10H11, from C-monocopper para-carborane and 1-bromo-2-(trimethylsilyl)ethyne, BrC[triple bond]CSiMe(3) is reported. The low-yield preparation of 1,12-(Me3SiC[triple bond]C)2-1,12-C2B10H10 from the C,C'-dicopper para-carborane derivative with 1-bromo-2-(trimethylsilyl)ethyne, BrC[triple bond]CSiMe3, has been re-investigated and other products were identified including the C-monoethynyl-carborane 1-Me3SiC[triple bond]C-1,12-C2B10H11 and two-cage assemblies generated from cage-cage couplings. The contrast in the yields of the monoethynyl and diethynyl products is due to the highly unfavourable coupling process between 1-RC[triple bond]C-12-Cu-1,12-C2B10H10 and the bromoalkyne. The ethynyl group at the cage carbon C(1) strongly influences the chemical reactivity of the cage carbon at C(12)-the first example of the "antipodal effect" affecting the syntheses of para-carborane derivatives. New two-step preparations of 1-ethynyl- and 1,12-bis(ethynyl)-para-carboranes have been developed using a more readily prepared bromoethyne, 1-bromo-3-methyl-1-butyn-3-ol, BrC[triple bond]CCMe2OH. The molecular structures of the two C-monoethynyl-carboranes, 1-RC[triple bond]C-1,12-C2B10H11 (R = H and Me3Si), were experimentally determined using gas-phase electron diffraction (GED). For R = H (R(G) = 0.053) a model with C(5v) symmetry refined to give a C[triple bond]C bond distance of 1.233(5) A. For R = Me3Si (R(G) = 0.048) a model with C(s) symmetry refined to give a C[triple bond]C bond distance of 1.227(5) A. Molecular structures of 1,12-Br2-1,12-C2B10H10, 1-HC[triple bond]C-12-Br-1,12-C2B10H10 and 1,12-(Me(3)SiC[triple bond]C)2-1,12-C2B10H10 were determined by X-ray crystallography. Substituents at the cage carbon atoms on the C2B10 cage skeleton in 1-X-12-Y-1,12-C2B10H10 derivatives invariably lengthen the cage C-B bonds. However, the subtle substituent effects on the tropical B-B bond lengths in these compounds are more complex. The molecular structures of the ethynyl-ortho-carborane, 1-HC[triple bond]C-1,2-C2B10H11 and the ethene, trans-Me3SiBrC=CSiMe3Br are also reported.

Journal Article↗
PubMed2006

The interplay of inverted redox potentials and aromaticity in the oxidized states of new pi-electron donors: 9-(1,3-dithiol-2-ylidene)fluorene and 9-(1,3-dithiol-2-ylidene)thioxanthene derivatives.

Derivatives of 9-(1,3-dithiol-2-ylidene)fluorene (9) and 9-(1,3-dithiol-2-ylidene)thioxanthene (10) have been synthesised using Horner-Wadsworth-Emmons reactions of (1,3-dithiol-2-yl)phosphonate reagents with fluorenone and thioxanthen-9-one. X-ray crystallography, solution electrochemistry, optical spectroscopy, spectroelectrochemistry and simultaneous electrochemistry and electron paramagnetic resonance (SEEPR), combined with theoretical calculations performed at the B3P86/6-31G** level, elucidate the interplay of the electronic and structural properties in these molecules. These compounds are strong two-electron donors, and the oxidation potentials depend on the electronic structure of the oxidised state. Two, single-electron oxidations (E(1)ox < E(1)ox) were observed for 9-(1,3-dithiol-2-ylidene)fluorene systems (9). In contrast, derivatives of 9-(1,3-dithiol-2-ylidene)thioxanthene (10) display the unusual phenomenon of inverted potentials (E(1)ox > E(1)ox) resulting in a single, two-electron oxidation process. The latter is due to the aromatic structure of the thioxanthenium cation (formed on the loss of a second electron), which stabilises the dication state (10(2+)) compared with the radical cation. This contrasts with the nonaromatic structure of the fluorenium cation of system 9. The two-electron oxidation wave in the thioxanthene derivatives is split into two separate one-electron waves in the corresponding sulfoxide and sulfone derivatives 27-29 owing to destabilisation of the dication state.

Journal Article↗
PubMed2006

Molecular wires comprising pi-extended ethynyl- and butadiynyl-2,5-diphenyl-1,3,4-oxadiazole derivatives: synthesis, redox, structural, and optoelectronic properties.

2,5-Diphenyl-1,3,4-oxadiazole (OXD) derivatives with terminal ethynyl- (4a,b) and butadiynyl- (8a,b) substituents have been synthesized in high yields. 2-Methyl-3,5-hexadiyn-2-ol has not been exploited previously in the synthesis of terminal butadiynes. Crystals of 8a and 8b are remarkably stable to long-term storage under ambient conditions. The X-ray crystal structure of 8a reveals that the butadiyne moieties are spatially isolated by the aromatic moieties, which explains the high stability. Two series of derived pi-conjugated molecules, Donor-(C[triple bond]C)(n)-OXD (n = 1, 2) and OXD-(C[triple bond]C)(n)-Donor-(C[triple bond]C)(n)-OXD (n = 1) [Donor = tetrathiafulvalene (TTF), bithiophene, 9-(4,5-dimethyl-1,3-dithiol-2-ylidene)fluorene, and triphenylamine], have been synthesized using Sonogashira reactions and characterized by X-ray crystallography, cyclic voltammetry, and optical absorption/emission spectroscopy. The electron-withdrawing effect of the OXD units is manifested by a positive shift of the donor oxidation waves in these systems: the butadiynylene spacer (n = 2) further shifts the first oxidation waves by 40-80 mV compared to analogues n = 1. The absorption spectra of TTF-OXD hybrids 10d and 11 are blue-shifted by 80 nm compared to the bithienyl-bridged derivative 10f and are similar to the butadiynyl-OXD building-block 8a, demonstrating that conjugation is disrupted by a neutral TTF unit. Solutions of the TTF-OXD and 9-(4,5-dimethyl-1,3-dithiol-2-ylidene)fluorene-OXD hybrids, 10d, 10g, 11, and 13, are only very weakly fluorescent due to quenching from the electron-donor moieties. In contrast, the triphenylamine-OXD hybrids 12a, 12b, 14a, and 14b are fluorescent; the PLQYs of the butadiynylene derivatives 14a and 14b are lower than those of the ethynylene-bridged analogues 12a and 12b.

Journal Article↗
PubMed2006

Synthesis, crystal structures, linear and nonlinear optical properties, and theoretical studies of (p-R-phenyl)-, (p-R-phenylethynyl)-, and (E)-[2-(p-R-phenyl)ethenyl]dimesitylboranes and related compounds.

The (p-R-phenyl)dimesitylboranes (R=Me(2)N, MeO, MeS, Br, I), (p-R-phenylethynyl)dimesitylboranes (R=Me(2)N, MeO, MeS, H), (E)-[2-(p-R-phenyl)ethenyl]dimesitylboranes (R=Me(2)N, H(2)N, MeO, MeS, H, CN, NO(2)), (E)-[2-(2-thienyl)ethenyl]dimesitylborane, and (E)-[2-(o-carboranyl)ethenyl]dimesitylborane have been prepared through the reaction of the appropriate p-R-phenyl- and p-R-phenylethynyllithium reagents with dimesitylboron fluoride and by hydroboration of the appropriate p-R-phenylacetylene, 2-ethynylthiophene, and o-ethynylcarborane with dimesitylborane. Their UV/Vis absorption and emission spectra have been recorded in a range of solvents with the fluorescence maxima of the donor-substituted compounds in particular exhibiting large bathochromic shifts in highly polar solvents, indicative of charge transfer leading to large dipole moments in the excited state. The molecular structures of the (p-R-phenyl)dimesitylboranes (R=Me(2)N, MeO, MeS, Br, I), the (E)-[2-(p-R-phenyl)ethenyl]dimesitylboranes (R=Me(2)N, H(2)N MeO, MeS, H), (p-R-phenylethynyl)dimesitylborane (R=Me(2)N), and (E)-[2-(2-thienyl)ethenyl]dimesitylborane, which have been determined from single-crystal X-ray diffraction measurements, offer evidence of increased conjugation in the ground state with increased donor strength of the R substituent. Their first- and second-order molecular hyperpolarizabilities have been obtained from EFISH and THG measurements, the first-order hyperpolarizabilities being largest for the strongest R-substituent donors. AM1 calculations have been performed on these compounds, showing reasonable agreement with the experimentally obtained bond lengths and hyperpolarizabilities, as well as on several related hypothetical compounds containing multiple C==C bonds, most of which are proposed to have even larger hyperpolarizabilities.

Journal Article↗
PubMed2006

Synthesis and reactivity of cobalt boryl complexes.

The reaction between [Co(PMe3)4] and B2(4-Mecat)2 (4-Mecat = 1,2-O2-4-MeC6H3) or between [Co(PMe2Ph)4] and B2(cat)2 (cat = 1,2-O2C6H4) affords the paramagnetic Co(II) bisboryl complexes [Co(PMe3)3[B(4-Mecat)]2] and [Co(PMe2Ph)3{B(cat)]2] respectively, both of which have been structurally characterised. ESR data and preliminary diboration and boryl transfer reactivity studies are also presented. The reaction between [CoMe(PMe3)4] and B2(cat)2 affords the Co(I) monoboryl complex [Co(PMe3)4[B(cat)]].

Journal Article↗