Biomedical subjects

Andrew D Burrows

Publications and source records attributed to Andrew D Burrows.

5 recordsLinked to original sources

PubMed2006

Substitution and derivatization reactions of a water soluble iron(II) complex containing a self-assembled tetradentate phosphine ligand.

Facile substitution reactions of the two water ligands in the hydrophilic tetradentate phosphine complex cis-[Fe{(HOCH2)P{CH2N(CH2P(CH2OH)2)CH2}2P(CH2OH)}(H2O)2](SO4) (abbreviated to [Fe(L1)(H2O)2](SO4), 1) take place upon addition of Cl-, NCS-, N3(-), CO3(2-) and CO to give [Fe(L1)X2] (2, X = Cl; 4, X = NCS; 5, X=N3), [Fe(L1)(kappa2-O(2)CO)], 6 and [Fe(L1)(CO)2](SO4), 7. The unsymmetrical mono-substituted intermediates [Fe(L1)(H2O)(CO)](SO(4)) and [Fe(L(1))(CO)(kappa(1)-OSO(3))] (8/9) have been identified spectroscopically en-route to 7. Treatment of 1 with acetic anhydride affords the acylated derivative [Fe{(AcOCH2)P{CH2N(CH2P(CH2OAc)2)CH2}2P(CH2OAc)}(kappa2-O(2)SO2)] (abbreviated to [Fe(L2)(kappa2-O(2)SO2)], 10), which has increased solubility over 1 in both organic solvents and water. Treatment of 1 with glycine does not lead to functionalisation of L1, but substitution of the aqua ligands occurs to form [Fe(L(1))(NH(2)CH(2)CO(2)-kappa(2)N,O)](HSO(4)), 11. Compound 10 reacts with chloride to form [Fe(L(2))Cl(2)] 12, and 12 reacts with CO in the presence of NaBPh4 to form [Fe(L2)Cl(CO)](BPh4) 13b. Both of the chlorides in 12 are substituted on reaction with NCS- and N3(-) to form [Fe(L2)(NCS)2] 14 and [Fe(L2)(N3)2] 15, respectively. Complexes 2.H2O, 4.2H2O, 5.0.812H2O, 6.1.7H2O, 7.H2O, 10.1.3CH3C(O)CH3, 12 and 15.0.5H2O have all been crystallographically characterised.

Crystallography, X-Ray↗

PubMed2004

Sterically hindered electron-withdrawing ligands: the reactions of N-carbazolyl phosphines with rhodium and palladium centres.

The series of N-carbazolyl phosphines PPh(3-n)(NC(12)H(8))(n)(n= 1, L1; n= 2, L2; n= 3, L3) has been synthesised using BuLi to generate the N-carbazolyl lithium salt, followed by reaction with the appropriate chlorophosphine. The reactions between [Rh(mu-Cl)(CO)(2)](2) and four equivalents of L1 or L2 gave [RhCl(CO)(L1)(2)] 1 and [RhCl(CO)(L2)(2)] 2, though attempts to synthesise the analogous complex using L3 resulted in the formation of [Rh(mu-Cl)(CO)(L3)](2) 3 instead. The inability of L3 to cleave the chloride bridges can be related to its considerable steric requirements. The electronic properties of L1-3 were assessed by comparison of the nu(CO) values of the [Rh(acac)(CO)(L1-3)] complexes 4-6. The increase in number of N-carbazolyl substituents at the phosphorus atom results in a decrease of the sigma-donor and increase in the pi-acceptor character in the order L1 < L2 < L3. In the reactions of L1-3 with [PdCl(2)(cod)] only L1 was able to displace cod from the metal centre and form [PdCl(2)(L1)(2)] 7. The use of [PdCl(2)(NCMe)(2)] instead of [PdCl(2)(cod)] resulted in the formation of the complexes [PdCl(2)(L1)(2)] 7 from L1, the cyclometallated complex [Pd(mu-Cl)[P(NC(12)H(8))(2)(NC(12)H(7))-kappa(2)P,C]](2) 8 from L3 , and a mixture of [PdCl(2)(L2)(2)] 9 and [Pd(mu-Cl)[PPh(NC(12)H(8))(NC(12)H(7))-kappa(2)P,C]](2) 10 from L2 . The reaction of L3 with [Pd(OAc)(2)] produced the cyclometallated complex [Pd(mu-O(2)CCH(3))[P(NC(12)H(8))(2)(NC(12)H(7))-kappa(2)P,C]](2) 11. The reaction of L3 with [Pd(2)(dba)(3)].CHCl(3) produced the 14-electron complex [Pd(L3)(2)] 12. The X-ray crystal structures of six complexes are reported, all of which show the presence of C-H...Pd hydrogen bonding.

Journal Article↗

PubMed2003

Diphosphines possessing electronically different donor groups: synthesis and coordination chemistry of the unsymmetrical Di(N-pyrrolyl)phosphino-functionalized dppm analogue Ph2PCH2P(NC4H4)2.

The unsymmetrical diphosphinomethane ligand Ph(2)PCH(2)P(NC(4)H(4))(2) L has been prepared from the reaction of Ph(2)PCH(2)Li with PCl(NC(4)H(4))(2). The diphenylphosphino group can be selectively oxidized with sulfur to give Ph(2)P(S)CH(2)P(NC(4)H(4))(2) 1. The reaction of L with [MCl(2)(cod)] (M = Pd, Pt) gives the chelate complexes [MCl(2)(L-kappa(2)P,P')] (2, M = Pd; 3, M = Pt) in which the M-P bond to the di(N-pyrrolyl)phosphino group is shorter than that to the corresponding diphenylphosphino group. However, the shorter Pd-P bond is cleaved on reaction of 2 with an additional 1 equiv of L to give [PdCl(2)(L-kappa(1)P)(2)] 4. Complex 4 reacts with [PdCl(2)(cod)] to regenerate 2, and with [Pd(2)(dba)(3)].CHCl(3) to give the palladium(I) dimer [Pd(2)Cl(2)(mu-L)(2)] 5, which exists in solution and the solid state as a 1:1 mixture of head-to-head (HH) and head-to-tail (HT) isomers. The palladium(II) dimer [Pd(2)Cl(2)(CH(3))(2)(mu-L)(2)] 6, formed by the reaction of [PdCl(CH(3))(cod)] with L, also exists in solution as a mixture of HH and HT isomers, although in this case the HT isomer prevails at low temperature and crystallizes preferentially. Complex 6 reacts with TlPF(6) to give the A-frame complex [Pd(2)(CH(3))(2)(mu-Cl)(mu-L)(2)]PF(6) 7. The reaction of L with [RuCp*(mu(3)-Cl)](4) leads to the dimer [Ru(2)Cp*(2)(mu-Cl)(2)(mu-L)] 8, for which the enthalpy of reaction has been measured. The reaction of L with [Rh(mu-Cl)(cod)](2) gives a mixture of compounds from which the dimer [Rh(2)(mu-Cl)(cod)(2)(mu-L)]PF(6) 9 can be isolated. The crystal structures of 2.CHCl(3), 3.CH(2)Cl(2), 4, 5.(1)/(4)CH(2)Cl(2), 6, 7.2CH(2)Cl(2), 8, and 9.CH(2)Cl(2) are reported.

Journal Article↗

PubMed2002

Selective cleavage of P-N bonds and the conversion of rhodium N-pyrrolyl phosphine complexes into diphosphoxane-bridged dimers.

Rhodium(I) complexes trans-[RhCl(CO)(PR(2)[NC(4)H(3)C(O)Me-2])(2)] (R = Ph, NC(4)H(4)) react with water to give the diphosphoxane-bridged dimers [Rh(2)Cl(2)(CO)(2)(mu-PR(2)OPR(2))(2)] following cleavage of the P-N bonds to the 2-acetyl-N-pyrrolyl groups. The two dimers have been crystallographically characterized and show a number of structural differences, with the PPh(2)OPPh(2) compound possessing semibridging chloride and carbonyl ligands whereas the P(NC(4)H(4))(2)OP(NC(4)H(4))(2) compound contains only terminal chlorides and carbonyls. No evidence for cleavage of the P-N bonds involving the unfunctionalized N-pyrrolyl groups in trans-[RhCl(CO)(P[NC(4)H(4)](2)[NC(4)H(3)C(O)Me-2])(2)] was observed.

Journal Article↗

PubMed2002

The design and applications of multifunctional ligands.

The properties of a metal coordination complex are determined as much by the ligand set--the molecules and ions coordinated to the metal centre--as by the nature of the metal itself. The design and use of new ligands is consequently a major part of chemical research. This review considers the role of multifunctional ligands in three separate and distinct areas of chemistry. In homogeneous catalysis, the role of hybrid and hemilabile ligands is considered, and the introduction of functionalities designed to overcome problems of separation, either by tethering or solubilising, is discussed. In supramolecular chemistry, functionalities enabling the recognition and sensing of cations and anions are examined. In addition, ligands containing two or more faces are discussed for their role in metallodendrimer formation and self-assembly reactions, and the use of bifunctional ligands in crystal engineering is addressed. The application of metal complexes in medicine is examined by consideration of cis-platin and its derivatives as anti-tumour agents. Imaging agents are also discussed with the uses of gadolinium MRI contrast agents and gamma-emitting technetium complexes highlighted.

Antineoplastic Agents↗