PubMed Health⌕ Search

Biomedical subjects

Andrew J Daugulis

Publications and source records attributed to Andrew J Daugulis.

21 records · Page 2Linked to original sources

Removal and destruction of high concentrations of gaseous toluene in a two-phase partitioning bioreactor by Alcaligenes xylosoxidans.

A two-phase bioreactor consisting of hexadecane dispersed in an aqueous, cell-containing medium (organic fraction = 0.33) was used to trap toluene vapours from an air stream. The affinity for toluene by the solvent resulted in high efficiency of removal and transfer to the aqueous phase based on equilibrium transfer. The system was readily able to handle a loading capacity of 748 mg l(-1) h(-1) at a toluene degradation efficiency of greater than 98%.

Air Pollutants↗

Addressing biofilter limitations: a two-phase partitioning bioreactor process for the treatment of benzene and toluene contaminated gas streams.

A two-phase partitioning bioreactor (TPPB) achieved simultaneous and continuous removal and degradation of benzene and toluene from an air stream. The aqueous- organic system utilized n-hexadecane as the organic phase, and the organism Alcaligenes xylosoxidans Y234 in the aqueous phase to achieve the degradation of benzene and toluene. The system, which operates as a well-mixed dispersion and is therefore resistant to substrate surges, was first shown to be capable of utilizing toluene while operating at a loading capacity of 235 g m(-3) h(-1) with an elimination capacity of 233 g m(-3) h(-1). It was also determined that to characterize TPPB performance in terms of elimination capacity the definition of elimination capacity must be extended to include the cell mass present, a readily controllable variable given the nature of the system. Based on this criterion, it was estimated that for a cell concentration of 1 g l(-1) present in the TPPB, the potential maximum toluene elimination capacity is 1290 g m(-3) h(-1) which is substantially higher than any toluene elimination capacity achieved by biofilters at a high removal efficiency. If no other factor were to limit the system, elimination capacities could be many times higher still, and are dependent on maintaining desired cell concentrations above 1 g l(-1). The TPPB was then operated at nominal loading capacities of 63 g m(-3) h(-1) (benzene) and 51 g m(-3) h(-1) (toluene) at a removal efficiency greater than 99% to demonstrated the applicability of this system in dealing with two chemical species simultaneously. TPPB systems therefore have been shown to be effective at removing gaseous organic contaminants at high removal efficiencies while also possessing desirable operating features, such as providing and maintaining high cell concentrations throughout the reactor, and a capacity to effectively deal with high contaminant loadings.

Air Pollutants↗

Polymer development for enhanced delivery of phenol in a solid-liquid two-phase partitioning bioreactor.

Two-Phase Partitioning Bioreactors (TPPBs) have traditionally been used to partition toxic concentrations of xenobiotics from a cell-containing aqueous phase by means of an immiscible organic solvent and to deliver these substrates back to the cells on the basis of metabolic demand and the maintenance of thermodynamic equilibrium between the phases. A limitation of TPPBs, which use organic liquid solvents, is the possibility that the solvent can be bioavailable, and this has therefore limited organic liquid TPPBs to the use of pure strains of microbes. Solid polymer beads have recently been introduced as a replacement for liquid organic solvents, offering similar absorption properties but with the capability to be used with mixed microbial populations. The present work was aimed at identifying a polymer with a greater capacity for and more rapid uptake and release of phenol for use as the second phase in a mixed culture TPPB. Polarity and hydrogen bonding capabilities between polymer and phenol were considered in the screening and selection process of candidate polymers. Hytrel (a copolymer of poly(butylene terephthalate) and butylene ether glycol terephthalate) polymer beads, offered improved capacity (19 mg phenol/g polymer at a fixed initial phenol concentration of 2000 mg/L) and a greater diffusivity (1.54 x 10(-7) cm2/s) when compared to the capacity and diffusivity of previously used EVA (ethylene vinyl acetate) beads (12.4 mg phenol/g polymer and 3.73 x 10(-9) cm2/s, respectively). Hytrel polymer beads were then used in a TPPB for the investigation of various substrate feeding strategies (fed-batch, bead replacement, and concentrated spikes of phenol), with rapid and complete phenol degradation shown in all cases.

Absorption↗