PubMed Health⌕ Search

Biomedical subjects

Andrew Mills

Publications and source records attributed to Andrew Mills.

15 recordsLinked to original sources
PubMed2006

Photochemical reduction of oxygen adsorbed to nanocrystalline TiO(2) films: a transient absorption and oxygen scavenging study of different TiO(2) preparations.

Transient absorption spectroscopy (TAS) has been used to study the interfacial electron-transfer reaction between photogenerated electrons in nanocrystalline titanium dioxide (TiO(2)) films and molecular oxygen. TiO(2) films from three different starting materials (TiO(2) anatase colloidal paste and commercial anatase/rutile powders Degussa TiO(2) P25 and VP TiO(2) P90) have been investigated in the presence of ethanol as a hole scavenger. Separate investigations on the photocatalytic oxygen consumption by the films have also been performed with an oxygen membrane polarographic detector. Results show that a correlation exists between the electron dynamics of oxygen consumption observed by TAS and the rate of oxygen consumption through the photocatalytic process. The highest activity and the fastest oxygen reduction dynamics were observed with films fabricated from anatase TiO(2) colloidal paste. The use of TAS as a tool for the prediction of the photocatalytic activities of the materials is discussed. TAS studies indicate that the rate of reduction of molecular oxygen is limited by interfacial electron-transfer kinetics rather than by the electron trapping/detrapping dynamics within the TiO(2) particles.

Journal Article↗
PubMed2006

Method of rapid assessment of photocatalytic activities of self-cleaning films.

An ink, comprising the redox dye resazurin (Rz) and the sacrificial electron donor glycerol, is shown to be capable of the rapid assessment of the photocatalytic activities of self-cleaning films. In the key initial stage of photocatalysis the ink changes from blue to pink. Prolonged irradiation bleaches the ink and eventually mineralizes it. The kinetics of the initial photoinduced color change is studied as a function of UV irradiance, [glycerol], [Rz], and temperature. The results reveal an apparent approximate quantum yield of 3.5 x 10(-3) and an initial rate, r(i), which increases with [glycerol] and decreases with [Rz]. It is proposed that the reduction of Rz, dispersed throughout the thick (ca. 590 nm) indicator film, may take place either via the diffusion of the dye molecules in the ink film to the surface of the underlying semiconductor layer and their subsequent reaction with photogenerated electrons and/or via the diffusion of alpha-hydroxyalkyl radicals, produced by the oxidation of the glycerol by photogenerated holes, or hydroxy radicals, away from the surface of the semiconductor into the ink film and their subsequent reaction with the dye molecules therein. The decrease in r(i) with [Rz] appears to be due to dimer formation, with the latter impeding the reduction process. The activation energy for the initial color-change process is low, ca. 9.1 +/- 0.1 kJ mol(-1) and not unlike many other photocatalytic processes. The initial rate of dye reduction appears to be directly related to the rate of destruction of stearic acid. The ink can be applied by spin-coating, stamping, or writing, using a felt-tip pen. The efficacy of such an ink for assessing the photocatalytic activity of any photocatalytic film, including those employed on commercial self-cleaning glasses, tiles, and paving stones, is discussed briefly.

Journal Article↗
PubMed2006

Kinetics of liquid phase semiconductor photoassisted reactions: supporting observations for a pseudo-steady-state model.

The kinetics of liquid phase semiconductor photocatalytic and photoassisted reactions are an area of some debate, reignited recently by an article by Ollis(1) in which he proposed a simple pseudo-steady-state model to interpret the Langmuir-Hinshelwood type kinetics, commonly observed in such systems. In the current article, support for this model, over other models, is provided by a reinterpretation of the results of a study, reported initially in 1999,(2) of the photoassisted mineralization of 4-chlorophenol, 4-CP, by titania films and dispersions as a function of incident light intensity, I. On the basis of this model, these results indicate that 4-CP is adsorbed more strongly on P25 TiO2 when it is in a dispersed, rather than a film form, due to a higher rate constant for adsorption, k(1). In addition, the kinetics of 4-CP removal appear to depend on I(beta), where beta = 1 or 0.6 for when the TiO2 is in a film or a dispersed form, respectively. These findings are discussed both in terms of the pseudo-steady-state model and other popular kinetic models.

Journal Article↗
PubMed2006

A viologen-based UV indicator and dosimeter.

A UV indicator/dosimeter based on benzyl viologen (BV2+) encapsulated in polyvinyl alcohol (PVA) is described. Upon exposure to UV light, the BV2+/PVA film turns a striking purple colour due to the formation of the cation radical, BV*+. The usual oxygen sensitivity of BV*+ is significantly reduced due to the very low oxygen permeability of the encapsulating polymer, PVA. Exposure of a typical BV2+/PVA film, for a set amount of time, to UVB light with different UV indices produces different levels of BV*+, as measured by the absorbance of the film at 550 nm. A plot of the change in absorbance at this wavelength, DeltaAbs(550), as a function of UV index, UVI, produces a linear calibration curve which allows the film to be used as a UVB indicator, and a similar procedure could be employed to allow it to be used as a solar UVI indicator. A typical BV2+/PVA film generates a significant, semi-permanent (stable for >24 h) saturated purple colour (absorbance approximately 0.8-0.9) upon exposure to sunlight equivalent to a minimal erythemal dose associated with Caucasian skin, i.e. skin type II. The current drawbacks of the film and the possible future use of the BV2+/PVA film as a personal solar UV dosimeter for all skin types are briefly discussed.

Journal Article↗
PubMed2006

Photocatalytic oxidation of soot by P25 TiO2 films.

The photomineralisation of soot by P25 titania films is studied using FT-IR and the process shown to involve the oxidation of carbon to CO2 exclusively. The efficiency of this process is low, however, with a formal quantum efficiency of 1.1 x 10(-4) molecules of carbon oxidized per incident photon of UVA light. The cause of this low efficiency is attributed largely to the less than intimate contact between the fibrous soot layer and the surface of the photocatalyst.

Carbon↗
PubMed2006

Luminescence temperature sensing using poly(vinyl alcohol)-encapsulated Ru(bpy)3 2+ films.

The ruthenium(II) diimine complexes, such as ruthenium(II) tris(bipyridyl), Ru(bpy)3 2+, possess highly luminescent excited states that are not only readily quenched by oxygen but also by an increase in temperature. The former effect can be rendered insignificant by encapsulating the complex in an oxygen impermeable polymer, although encapsulation often leads also to a loss of temperature sensitivity. The luminescence properties of Ru(bpy)3 2+ encapsulated in PVA were studied as a function of oxygen concentration and temperature and found to be independent of the former, but still very sensitive towards the latter. The results were fitted to an established Arrhenius-type equation, based on thermal quenching of the emitting state by a slightly higher (DeltaE= 3100 cm(-1))3d-d state that deactivates very rapidly (10(-13) s)via a non-radiative process.

Journal Article↗
PubMed2005

Oxygen indicators and intelligent inks for packaging food.

The detection of oxygen using optical sensors is of increasing interest, especially in modified atmosphere food packaging (MAP), in which the package, usually containing food, is flushed with a gas, such as carbon dioxide or nitrogen. This tutorial review examines the ideal properties of an oxygen optical sensor for MAP and compares them with those developed to date, including the most recent advances. The basic technologies underpinning the different indicator types are described, examples given and their potential for application in MAP assessed. This tutorial review should be of interest to the MAP industry and researchers in optical sensors and oxygen sensing.

Colorimetry↗
PubMed2005

Development of a novel UV indicator and dosimeter film.

A novel UV indicator is described, comprising nanocrystalline particles of titania dispersed in a film of a polymer, hydroxyl ethyl cellulose (HEC), containing: a mild reducing agent, triethanolamine (TEOA) and a redox indicator, methylene blue (MB). The UV indicator film is blue-coloured in the absence of UV light and loses colour upon exposure to UV light, attaining within a few min a steady-state degree of bleaching that can provide a measure of the irradiance of the incident light. The original blue colour of the film returns once the source of UV light is removed. The spectral characteristics of a typical UV indicator film, and its components, are discussed and the UV-absorbing action of the titania particles highlighted. From the measured %bleaching undergone by a typical UV indicator as a function of light irradiance the indicator appears fully bleached, within 7 min, by a UV irradiance of 3 mW cm(-2) or greater. The mechanism by which the UV indicator works is described. The reversible nature of the UV indicator is removed by covering a typical UV indicator with a thin, largely oxygen impermeable, polymer film, such as the regenerated cellulose found in Sellotape. The product is a UV dosimeter, the response of which is related to the intensity and duration of the incident UV light, as well as the amount of titania in the film. A typical UV dosimeter film is fully bleached by 250 mJ cm(-2) of UV light. The possible use of these novel indicators to measure UV exposure levels, irradiance and dose, is discussed.

Film Dosimetry↗
PubMed2005

An intelligence ink for photocatalytic films.

An ink is described which, when printed or coated onto a photocatalyst film, changes colour irreversibly and rapidly upon UV activation of the photocatalyst film and at a rate commensurate with its activity.

Journal Article↗
PubMed2004

An intelligence ink for oxygen.

A generic ink formulation is described, comprising semiconductor photocatalyst particles, a brightly-coloured redox dye, a mild reducing agent, a polymer and a solvent, that creates an irreversible, reusable, UV-light-activated, colorimetric indicator or intelligence ink for oxygen.

Journal Article↗
PubMed2003

Novel photochemistry of leuco-Methylene Blue.

leuco-Methylene Blue has a previously unrecognized, very reactive, UV-driven triplet state photochemistry and, in particular, undergoes photo-oxidative quenching with dissolved oxygen.

Journal Article↗
PubMed2003

Identification of Entamoeba histolytica thiol-specific antioxidant as a GalNAc lectin-associated protein.

Entamoeba histolytica is a human intestinal parasite that causes amebic dysentery. A cell surface amebic adhesin, the galactose and N-acetyl-D-galactosamine inhibitable (GalNAc) lectin mediates amebic adherence to and contact-dependent killing of host cells. Previous work has suggested that the GalNAc lectin transduces signals via protein interactions with its short cytoplasmic domain. We used a yeast two-hybrid system to screen an E. histolytica cDNA library for proteins that interact with the GalNAc lectin cytoplasmic domain. One isolate was the E. histolytica thiol-specific antioxidant (TSA). TSA is an enzyme that detoxifies hydrogen peroxide. TSA did not interact in yeast two-hybrid experiments with a mutant version of the lectin cytoplasmic domain, confirming the specificity of the lectin-TSA interaction. Furthermore, mutational analyses of the TSA isolate demonstrated that an in-frame five amino acid sequence introduced between amino acids 61-62 yielded a TSA mutant that did not interact with the lectin cytoplasmic domain upon expression in the yeast two-hybrid system. The association of TSA and GalNAc lectin was further supported by co-immunoaffinity purification. Confocal microscopy demonstrated co-localization of TSA and GalNAc lectin at sites of ameba:host cell contact. Recruitment of TSA by the GalNAc lectin suggests a novel mechanism of parasite defense against reactive oxygen intermediates generated by host peripheral mononuclear cells.

Acetylgalactosamine↗
PubMed2003

Preparation and characterisation of novel thick sol-gel titania film photocatalysts.

The preparation and characterization of thick (9 microns), clear, mechanically robust and photocatalytically active films of nanocrystalline anatase titania are described. XRD and SEM analysis show the films comprise 13 nm particles of anatase TiO2. Thin (54 nm) films of the 'paste' TiO2, along with sol-gel titania films made by a more traditional route are also prepared and characterised. All titania films mediate the photocatalytic destruction of stearic acid with a quantum yield of 0.0016 +/- 0.0003, using either 365 nm (i.e. BLB) or 254 nm (germicidal) light. P25 TiO2 films also appear to mediate the same process with a similar formal quantum efficiency. Of all the films tested, the thick paste TiO2 films are the most ideally suited for use with near UV light, for reasons which are discussed. All the titania films tested exhibit photoinduced superhydrophilicity.

Journal Article↗
PubMed2002

Spectral and photocatalytic characteristics of TiO2 CVD films on quartz.

A series of novel CVD films of titanium(IV) oxide of different thicknesses, spanning the range 10-91 nm, are prepared on quartz, via the reaction of titanium(IV) chloride and ethyl acetate, using a CVD technique. The films are clear, mechanically robust and comprise thin layer of nanocrystalline anatase titania of different thicknesses that absorb UV light. The UV-Visible spectral profiles of all the CVD TiO2 films of different thickness are the same and obey Lambert's law (absorbance is porportional to film thickness). A plot of the reciprocal length for the TiO2 coating versus wavelength is reported. The photocatalytic activity of each film to mediate the destruction of a thin layer of stearic acid is investigated. The rate depends directly upon the fraction of light absorbed and the apparent quantum yield for the overall process is 0.00035, which appears low compared with that for sol-gel TiO2 films.

Journal Article↗