PubMed Health⌕ Search

Biomedical subjects

Andrew P Abbott

Publications and source records attributed to Andrew P Abbott.

15 recordsLinked to original sources
PubMed2006

Electropolishing of stainless steels in a choline chloride based ionic liquid: an electrochemical study with surface characterisation using SEM and atomic force microscopy.

We have studied the anodic dissolution (electropolishing) of various stainless steel alloys in an ionic liquid comprising a 2 : 1 stoichiometric mix of ethylene glycol (EG) and choline chloride. We have used a combination of electrochemical and spectroscopic methods together with in situ liquid probe microscopy. We discuss the role and influence of the surface oxide passivation layer, characterized here by X-ray photoelectron spectroscopy (XPS) and linear sweep voltammetry, on the polishing process. We address the question of dealloying during the polish in order to contribute to our understanding of the viability of the ionic liquid as a replacement industrial electropolishing medium; the current commercial process uses a corrosive mixture of phosphoric and sulfuric acids. Also, we present data from ex situ and in situ liquid AFM studies giving both a qualitative and quantitative insight into the nature and scale of morphological changes at the steel surface during the polishing process.

Choline↗
PubMed2006

Application of ionic liquids to the electrodeposition of metals.

The electrodeposition of most of technologically important metals has been shown to be possible from a wide range of room temperature molten salts, more commonly known today as 'ionic liquids'. These liquids are currently under intense scrutiny for a wide variety of applications some of which have already been commercialized. Despite the fact that electrodeposition was the first application studied in these liquids no metal deposition processes have as yet been developed to an industrial scale. This review addresses the practical and theoretical aspects that need to be considered when choosing ionic liquids for metal deposition. It details the current understanding of the physical and chemical properties of these interesting fluids and highlights the areas that need to be considered to develop practical electroplating systems. The effect of composition and temperature on viscosity and conductivity are discussed together with the fundamental approaches required to synthesise new liquids.

Journal Article↗
PubMed2005

Effect of electrolyte concentration on the viscosity and voltammetry of supercritical solutions.

The viscosity of a supercritical electrolyte solution is measured for the first time using a modified quartz crystal microbalance, and it is shown that ionic solvation leads to a significant structuring of the solvent and an appreciable increase in solution viscosity. Voltammetric investigations in the electrolyte solutions are used to confirm the magnitude of the viscosity changes, and these account for the appreciably lower than expected peak currents.

Borates↗
PubMed2005

Pressure effects on Friedel-Crafts alkylation reactions in supercritical difluoromethane.

Dielectrometry is used as a novel technique for following the rate of a Friedel-Crafts alkylation reaction in supercritical (sc) difluoromethane. Although the process was not optimized, good product yields were obtained and reaction rates were found to be larger than in CO2 at comparable conditions. The reaction order is determined using the initial rate method and the reaction is shown to be first-order with respect to both anisole and t-butyl chloride. The reaction rate constant is unaffected by pressures above 120 bar but close to the critical pressure the value decreases with increasing pressure. It is also shown that the product distribution for the alkylation of anisole shows significant pressure dependence with substitution at the ortho-position being favored at lower pressures, which is ascribed to hydrogen bonding. This pressure dependency is not observed in sc CO2 or using toluene as a substrate, which supports the idea that hydrogen bonding may be important in the reaction mechanism. The effect of the different reagents and temperature on the rate of the alkylation reaction was also determined.

Journal Article↗
PubMed2004

Ionic liquid analogues formed from hydrated metal salts.

A dark green, viscous liquid can be formed by mixing choline chloride with chromium(III) chloride hexahydrate and the physical properties are characteristic of an ionic liquid. The eutectic composition is found to be 1:2 choline chloride/chromium chloride. The viscosity and conductivity are measured as a function of temperature and composition and explained in terms of the ion size and liquid void volume. The electrochemical response of the ionic liquid is also characterised and it is shown that chromium can be electrodeposited efficiently to yield a crack-free deposit. This approach could circumvent the use of chromic acid for chromium electroplating, which would be a major environmental benefit. This method of using hydrated metal salts to form ionic liquids is shown to be valid for a variety of other salt mixtures with choline chloride.

Journal Article↗
PubMed2004

Deep eutectic solvents formed between choline chloride and carboxylic acids: versatile alternatives to ionic liquids.

Deep Eutectic Solvents (DES) can be formed between a variety of quaternary ammonium salts and carboxylic acids. The physical properties are significantly affected by the structure of the carboxylic acid but the phase behavior of the mixtures can be simply modeled by taking account of the mole fraction of carboxylic acid in the mixture. The physical properties such as viscosity, conductivity, and surface tension of these DES are similar to ambient temperature ionic liquids and insight into the cause of these properties is gained using hole-theory. It is shown that the conductivity and viscosity of these liquids is controlled by ion mobility and the availability of voids of suitable dimensions, and this is consistent with the fluidity of other ionic liquids and molten salts. The DES are also shown to be good solvents for metal oxides, which could have potential application for metal extraction.

Journal Article↗
PubMed2004

Ionic liquids based upon metal halide/substituted quaternary ammonium salt mixtures.

The synthesis of ionic liquids based upon functionalized quaternary ammonium salts and metal salts of zinc, tin, or iron is demonstrated. The freezing point of these ionic liquids was studied as a function of the quaternary ammonium cation. The complex anions were identified and quantified using mass spectrometry and potentiometry. It is shown that the primary zinc anion is Zn(2)Cl(5)(-) with Zn(3)Cl(7)(-) becoming more abundant in more Lewis basic solutions. Similar results were observed for ionic liquids containing SnCl(2). The surface tension was also measured and was used to explain the high viscosity of the ionic liquids in terms of the large ion:hole size ratio and the small probability of finding a hole of suitable dimensions adjacent to a given ion to permit movement. The phase behavior of a variety of quaternary ammonium halides/ZnCl(2) mixtures is characterized and it is shown that the depression of freezing point is related to the increase in size of the component ions.

Journal Article↗
PubMed2003

Electrochemical recognition of analytes using quaternary ammonium binaphthyl salts.

The electrooxidation of quaternary ammonium binaphthyl salts is shown to proceed by a quasi-reversible one-electron process. The oxidation of an aza-crown ether substituted binaphthyl salt is affected by the presence of lithium and sodium ions in solution and there is shown to be a linear relationship between the limiting current for the process and the concentration of Li+ and Na+. The electrochemistry of the binaphthyl salt is also shown to be affected by the addition of organic cations to the solution, showing that these receptors could form the basis of analytical devices which could be made specific to a range of analytes.

Journal Article↗
PubMed2002

Electrochemical recognition of chiral species using quaternary ammonium binaphthyl salts.

The use of ephedrine-substituted quaternary ammonium binaphthyl salts as molecular receptors is demonstrated. The electrochemical oxidation of the receptor is affected by the binding of an analyte in solution. The binding site on the binaphthyl salt has been determined using computer modeling and confirmed using 1D and 2D NMR studies. It is shown that the sensitivity of the receptor is related to the size of the analyte. Axially chiral binaphthyl salts are shown to bind chiral analytes in a different manner and this is demonstrated using lactic and mandelic acid. The presence of a polar functional group on the analyte is also shown to have an effect on the guest-host interaction.

Journal Article↗