PubMed Health⌕ Search

Biomedical subjects

Andrey A Fokin

Publications and source records attributed to Andrey A Fokin.

13 recordsLinked to original sources
PubMed2006

Reactivity of [1(2,3)4]pentamantane (Td-pentamantane): a nanoscale model of diamond.

To model the chemical properties of the hydrogen-terminated nanodiamond {111} and {110} surfaces, the functionalizations of the higher diamondoid [1(2,3)4]pentamantane were studied. [1(2,3)4]Pentamantane reacts selectively with neat bromine to give the medial 2-mono- and 2,4-disubstitution products. In contrast, oxidation with nitric acid as well as single-electron-transfer oxidation involving the [1(2,3)4]pentamantane radical cation results in apical C7-substitutions. This substitution pattern dominates in the free-radical bromination under phase-transfer catalytic conditions that gives a mixture of 7- and 2-bromo[1(2,3)4]pentamantane in a 95:5 ratio. Replacement of the functional groups in [1(2,3)4]pentamantane occurs without isomerization. This was demonstrated for the interconversions of the bromo and hydroxy derivatives as well as for the preparation of [1(2,3)4]pentamantyl-7-thiol from 7-hydroxy[1(2,3)4]pentamantane. Thus, the selective functionalization of hydrogen-terminated nanodiamonds is possible by means of reactions with common electrophiles-oxidizers.

Journal Article↗
PubMed2006

Functionalized nanodiamonds: triamantane and [121]tetramantane.

The selective functionalizations of the fundamental hydrogen-terminated nanodiamonds triamantane 1, as well as the most symmetrical representative of the tetramantanes (C(2h)-[121]tetramantane 2) were elaborated. Electrophilic reagents (Br2, HNO3) predominantly attack the medial C-H positions of the cages; bromination of 2 gave the medial 2-bromo derivative almost exclusively. Highly selective apical substitution in 1 and 2 is possible either under single-electron-transfer oxidations via hydrocarbon radical cations or through photoacetylation with diacetyl. The mono- and the bis-acetyl derivatives of 1 and 2 were converted through Bayer-Villiger oxidation and subsequent hydrolysis to the respective apical mono- and dihydroxy derivatives. This exceptional synthetic specificity facilitates the transformation of 2, and perhaps larger nanodiamond molecules, into functionalized building blocks needed for a wide range of applications such as nanotechnology.

Journal Article↗
PubMed2006

Many density functional theory approaches fail to give reliable large hydrocarbon isomer energy differences.

[structure: see text] Several DFT methods were found to be unreliable for computing hydrocarbon isomer energy differences. The errors grow with system size up to 20 kcal mol(-1) for the relative energies of the (CH)12 isomers; octahedrane is the most stable (CH)12 hydrocarbon. While DFT geometries generally are good, problems arise for structures with single bonds only, especially for small rings. We recommend the use of higher level, non-DFT energy single points computed at DFT-optimized structures.

Journal Article↗
PubMed2006

Functionalized nanodiamonds part 3: thiolation of tertiary/bridgehead alcohols.

[reaction: see text] Treatment of acyclic as well as polycyclic tertiary mono- and dihydroxy hydrocarbon derivatives with thiourea in the presence of hydrobromic and acetic acid represents a convenient one-step route to the respective tertiary thiols and dithiols. This procedure was used for the preparation of diamondoid thiols of diamantane, triamantane, [121]tetramantane, and others that are prospective nanoelectronic materials.

Journal Article↗
PubMed2006

Pseudotetrahedral polyhalocubanes: synthesis, structures, and parity violating energy differences.

All possible pseudotetrahedral, stable polyhalocubanes were prepared, and their structures were proven by NMR spectroscopy and X-ray crystallography. Parity violating energy differences (DeltaEpv) and vibrational frequency shifts were computed. The DeltaEpv values are predicted to be one to two orders of magnitude smaller than those for the corresponding polyhalomethanes. However, the DeltaEpv energy ordering is the same as that for the methane analogues. For both substance classes, the (S) isomers are, with the exception of the bromochlorofluoroiodo derivatives, more stable than the (R) forms.

Journal Article↗
PubMed2005

Functionalized nanodiamonds part I. An experimental assessment of diamantane and computational predictions for higher diamondoids.

The structures, strain energies, and enthalpies of formation of diamantane 1, triamantane 2, isomeric tetramantanes 3-5, T(d)-pentamantane 6, and D(3d)-hexamantane 7, and the structures of their respective radicals, cations, as well as radical cations, were computed at the B3LYP/6-31G* level of theory. For the most symmetrical hydrocarbons, the relative strain (per carbon atom) decreases from the lower to the higher diamondoids. The relative stabilities of isomeric diamondoidyl radicals vary only within small limits, while the stabilities of the diamondoidyl cations increase with cage size and depend strongly on the geometric position of the charge. Positive charge located close to the geometrical center of the molecule is stabilized by 2-5 kcal mol(-1). In contrast, diamondoid radical cations preferentially form highly delocalized structures with elongated peripheral C-H bonds. The effective spin/charge delocalization lowers the ionization potentials of diamondoids significantly (down to 176.9 kcal mol(-1) for 7). The reactivity of 1 was extensively studied experimentally. Whereas reactions with carbon-centered radicals (Hal)(3)C(*) (Hal=halogen) lead to mixtures of all possible tertiary and secondary halodiamantanes, uncharged electrophiles (dimethyldioxirane, m-chloroperbenzoic acid, and CrO(2)Cl(2)) give much higher tertiary versus secondary selectivities. Medial bridgehead substitution dominates in the reactions with strong electrophiles (Br(2), 100 % HNO(3)), whereas with strong single-electron transfer (SET) acceptors (photoexcited 1,2,4,5-tetracyanobenzene) apical C(4)-H bridgehead substitution is preferred. For diamondoids that form well-defined radical cations (such as 1 and 4-7), exceptionally high selectivities are expected upon oxidation with outer-sphere SET reagents.

Journal Article↗
PubMed2005

Preparation and reactivity of [D3d]-octahedrane: the most stable (CH)12 hydrocarbon.

The synthesis of the (CH)12 hydrocarbon [D(3d)]-octahedrane (heptacyclo[6.4.0.0(2,4).0(3,7).0(5,12).0(6,10).0(9,11)]dodecane) 1 and its selective functionalization retaining the hydrocarbon cage is described. The B3LYP/6-311+G* strain energy of 1 is 83.7 kcal mol(-1) (4.7 kcal mol(-1) per C-C bond) which is significantly higher than that of the structurally related (CH)16 [D(4d)]-decahedrane 2 (75.4 kcal mol(-1); 3.1 kcal mol(-1) per C-C bond) and (CH)20 [I(h)]-dodecahedrane 3 (51.5 kcal mol(-1); 1.7 kcal mol(-1) per C-C bond); the heats of formation for 1-3 computed according to homodesmotic equations are 52, 35, and 4 kcal mol(-1). Catalytic hydrogenation of 1 leads to consecutive opening of the two cyclopropane rings to give C2-bisseco-octahedrane (pentacyclo[6.4.0.0(2,6).0(3,11).0(4,9)]dodecane) 16 as the major product. Although 1 is highly strained, its carbon skeleton is kinetically quite stable: Upon heating, 1 does not decompose until above 180 degrees C. The B3LYP/6-31G* barriers for the S(R)2 attack of the tBuO. and Br3C. radicals on a carbon atom of one of the cyclopropane fragments (Delta(298) = 27-28 kcal mol(-1)) are higher than those for hydrogen atom abstraction. The latter barriers are virtually identical for the abstraction from the C1-H and C2-H positions with the tBuO. radical (DeltaG(298) = 17.4 and 17.9 kcal mol(-1), respectively), but significantly different for the reaction at these positions with the Br3C. radical (DeltaG(298) = 18.8 and 21.0 kcal mol(-1)). These computational results agree well with experiments, in which the chlorination of 1 with tert-butyl hypochlorite gave a mixture of 1- and 2-chlorooctahedranes (ratio 3:2). The bromination with carbon tetrabromide under phase-transfer catalytic (PTC) conditions (nBu4NBr/NaOH) selectively gave 1-bromooctahedrane in 43 % isolated yield. For comparison, the PTC bromination was also applied to 2,4-dehydroadamantane yielding 54 % 7-bromo-2,4-dehydroadamantane.

Journal Article↗
PubMed2004

Selective alkane C-H-bond functionalizations utilizing oxidative single-electron transfer and organocatalysis.

Alkane C-H-bond functionalization methods not utilizing metal-catalysis are discussed based on experimental and computational data, beginning with molecule-induced homolysis (reactions of alkanes with dioxiranes). Electrophilic reactions are elaborated next with an emphasis on mechanistic details that reveal that many so-called electrophilic C-H or C-C-bond insertions can be rationalized by electron-transfer reactions (inner sphere, H-coupled, and outer sphere). Finally, radical functionalizations utilizing carbon-centered (relatively stable) radicals generated under organocatalytic (phase-transfer catalysis, PTC) conditions are presented as valuable alternatives to other radical-chain alkane functionalizations. The remarkable chemo- and regioselectivities of these PTC radical reactions and the tolerance of high strain in certain aliphatic hydrocarbons make them particularly useful for laboratory-scale halogenations, in particular, iodinations of unactivated alkane C-H-bonds.

Journal Article↗
PubMed2003

Delocalizations in sigma-radical cations: the intriguing structures of ionized [n]rotanes.

Highly symmetric aliphatic hydrocarbons such as D(4h)-[4]rotane do not necessarily have degenerate HOMOs. According to our predictions based on high-level computations, its radical cation should display a highly delocalized D(4h)-symmetric structure, in contrast to its Jahn-Teller distorted cousin, the radical cation of [3]rotane, which exists in two distonic localized forms with C(2v) and C(s) symmetry.

Journal Article↗
PubMed2002

Pseudotetrahedral polyhaloadamantanes as chirality probes: synthesis, separation, and absolute configuration.

Pseudotetrahedral, conformationally as well as configurationally stable 1-bromo-3-chloro-5-fluoro- (4) and 1-bromo-3-chloro-5-fluoro-7-iodoadamantane (5) (and some related compounds) were prepared by our recently devised phase-transfer catalytic halogenation protocol; the optical antipodes of 4 were separated by HPLC on chiral phase in ee > 99%, and the absolute configurations were assigned by matching observed and computed circular dichroism spectra. Structure 5 is the first chiral aliphatic hydrocarbon containing all stable (nonradioactive) halogens; its structure was proven by NMR spectroscopy and by X-ray crystal data. We emphasize that the combination of experiment and theory is very powerful in assigning absolute configurations even for molecules without typical chromophors, with small values for the optical rotation, and without an atom at the stereogenic center.

Journal Article↗
PubMed2002

H-coupled electron transfer in alkane C-h activations with halogen electrophiles.

The mechanisms for the reactions of isobutane and adamantane with polyhalogen electrophiles (HHal(2)(+), Hal(3)(+), Hal(5)(+), and Hal(7)(+), Hal = Cl, Br, or I) were studied computationally at the MP2 and B3LYP levels of theory with the 6-31G (C, H, Cl, Br) and 3-21G (I) basis sets, as well as experimentally for adamantane halogenations in Br(2), Br(2)/HBr, and I(+)Cl(-)/CCl(4). The transition structures for the activation step display almost linear C...H...Hal interactions and are characterized by significant charge transfer to the electrophile; the hydrocarbon moieties resemble the respective radical cation structures. The regiospecificities for polar halogenations of the 3-degree C-H bonds of adamantane, the high experimental kinetic isotope effects (k(H)/k(D) = 3-4), the rate accelerations in the presence of Lewis and proton (HBr) acids, and the high kinetic orders for halogen (7.5 for Br(2)) can only be understood in terms of an H-coupled electron-transfer mechanism. The three centered-two electron (3c-2e) electrophilic mechanistic concept based on the attack of the electrophile on a C-H bond does not apply; electrophilic 3c-2e interactions dominate the C-H activations only with nonoxidizing electrophiles such as carbocations. This was shown by a comparative computational analysis of the electrophilic and H-coupled electron-transfer activation mechanisms for the isobutane reaction with an ambident electrophile, the allyl cation, at the above levels of theory.

Journal Article↗