Biomedical subjects

Antonio Barone

Publications and source records attributed to Antonio Barone.

16 recordsLinked to original sources

PubMed2006

Clinical outcome of implants placed immediately after implant removal.

BACKGROUND: The purpose of this study was to evaluate the clinical success of implants placed immediately after the explantation of failed implants due to fracture at 12 months. METHODS: Nine immediate implants were placed in nine patients following explantation of nine fractured implants. Five experimental implants did not require any regenerative procedures; the remaining four immediate implants were grafted with deproteinized porcine bone particles and covered with bioabsorbable membranes. All implants were restored with fixed prostheses. The follow-up period was 12 months. RESULTS: No residual bone defects were observed or probed around any implant at the second-stage surgery, and all implants were asymptomatic and stable. All the implants were successful after prosthetic rehabilitation showing no mobility, pain, suppuration, or absence of peri-implant radiolucency. The radiographic measurements showed no significant bone loss pattern at the 12-month follow-up visit. CONCLUSION: The findings of this study suggested that implants placed immediately after implant explantation due to biomechanical fracture could be performed with results that are similar to results obtained with implants placed immediately after tooth extraction.

Adult↗

PubMed2006

Er:YAG laser scaling of diseased root surfaces: a histologic study.

BACKGROUND: The aim of the present study was to observe the effects of an erbium-doped:yttrium, aluminum, and garnet (Er:YAG) laser when used to treat periodontally involved root surfaces. METHODS: Forty teeth affected by severe periodontal disease and scheduled for extraction were divided into two groups: in group A (control), 20 teeth were treated by hand instrumentation, and in group B (test), 20 teeth were treated by Er:YAG laser. RESULTS: In group A (teeth treated by curets), the root cementum layer was completely removed, but many deep scratches on the dentin layer were also observed. In group B, the laser-treated root surfaces, there was no cracking or carbonization, and the bacterial flora was completely eliminated, leaving a rough and uniform surface. CONCLUSION: Results of the present study showed that clinical use of an Er:YAG laser in vivo achieves plaque and calculus removal, providing a rough surface morphology.

Adult↗

PubMed2005

Central odontogenic fibroma: a case report.

OBJECTIVE: The aim of this case report was to analyze clinical and histological features of a central odontogenic fibroma followed up for 6 years after surgical excision. METHODS: A 26-year old Caucasian female was referred, reporting a painless gingival swelling in the buccal area of the maxillary right canine. There were no other symptoms and no recent history of pain. Her medical history was non-contributory. Radiographic evaluation showed the presence of a radiolucent area with well-defined margins. The lesion was surgically removed and histologically analysed. RESULTS: Histologic analysis showed a cellular fibroblastic tissue characterized by interwoven bundles of collagen densely packed and absence of odontogenic epithelium. The surgical site was monitored for 6 years after surgery with no signs of recurrence. CONCLUSION: The central odontogenic fibroma here reported displayed a prominent quantity of collagen and absence of odontogenic epithelium. The surgically removed lesion had a favourable prognosis and no recurrence for the 6 year follow-up period.

Adult↗

PubMed2005

An in-vitro study of the sterilization of titanium dental implants using low intensity UV-radiation.

OBJECTIVES: Commercial titanium dental implants are coated with nanostructured TiO2. The aim of the research reported in this paper was to assess whether the TiO2 at the surface of a dental implant is sufficiently photoactive to eradicate bacteria when illuminated with low intensity light. METHODS: The photoactivity of dental implants was established by studies of the photoenhanced decomposition of Rhodamine B. In vitro studies to establish the influence of irradiating with UV light an implant that is immersed in a solution containing Escherichia Coli were performed. RESULTS: It was demonstrated that under low UV intensity irradiation, 49 microW cm(-2), bacteria are killed at a rate of approximately 650 million per cm2 of implant per minute. SIGNIFICANCE: The results indicate that illumination of dental implants with UV light may be a suitable treatment for periimplantitis.

Dental Implants↗

PubMed2005

Histologic evaluation of three methods of periodontal root surface treatment in humans.

BACKGROUND: Removing subgingival plaque and calculus is a major goal of periodontal treatment. Few attempts have been made to evaluate the use of lasers for root surface debridement in periodontal therapy. The aim of the present study was to compare, histologically, the effects of hand instrumentation, ultrasonic instrumentation, and CO2 lasers on the root surfaces of teeth treated in situ. METHODS: A total of 33 teeth scheduled for extraction due to severe periodontal disease were divided into three groups. In the first group, teeth were treated by ultrasonic bactericidal curettage (UBC) with an ultrasonic scaler; in the second group, teeth were treated by hand instrumentation; and in the third group, after hand instrumentation, roots were lased by a CO2 laser. The samples were then processed for histological examination. RESULTS: In the first and second groups, plaque and calculus were present in interradicular septa, lacunae, and surface concavities. In the third group, surfaces of specimens treated by a low-power defocused CO2 laser showed areas devoid of cementum, with completely sealed dentinal tubules, and no bacterial cell remnants. CONCLUSIONS: The CO2 laser treatment, used at low power and in the defocused mode, combined with traditional mechanical instrumentation, could improve root surface debridement of periodontally involved teeth. More extensive, long-term studies are needed to confirm this hypothesis.

Carbon Dioxide↗

PubMed2005

Er:YAG laser in defocused mode for scaling of periodontally involved root surfaces: an in vitro pilot study.

BACKGROUND: The Er:YAG laser may be used on periodontally involved teeth in combination with conventional periodontal therapy in order to improve the efficacy of root instrumentation. The aim of this study was to compare the effect of hand instrumentation on root surfaces of periodontally involved teeth with Er:YAG laser application. METHODS: Thirty freshly extracted, non-carious, single-rooted, periodontally diseased human teeth from adult humans with advanced periodontal disease were used in this study. The teeth were divided into three groups of 10 specimens each. Group A was treated with scaling and root planing (SRP) with curets only (control). In group B, the root surfaces were scaled with curets and then lased with an Er:YAG laser (wavelength 2.94 microm). A handpiece with a water spray was used in non-contact mode (defocused) at a distance of 1 cm from root surface. Laser parameters were set at energy of 100 to 200 mJ/pulse, with 10 Hz of frequency. In group C, the root surfaces were lased only with power settings 250 to 300 mJ/pulse and 10 Hz frequency. An epon-araldite plastic embedding technique was used for light microscopic investigation. RESULTS: Histologic findings showed significant differences between the test and control sites. In control sites, after hand instrumentation, the surface was smooth, without a cementum layer, and the dentin layer presented opened tubules. Defects on the dentin layer were also present along root surfaces. In the test sites (B, C) root surfaces revealed no thermal damage; no cracking or tissue carbonization were observed. The superficial layers of lased surfaces appeared smooth and melted without alterations. CONCLUSION: Based on these findings, it appears that it may be feasible to use the Er:YAG laser for root instrumentation without prior root planing if the proper parameters are followed.

Adult↗

PubMed2005

Effect of Er:YAG laser on diseased root surfaces: an in vivo study.

BACKGROUND: The aim of the present study was to observe in vivo the effects of two different power settings of an Er:YAG laser on pockets of periodontally involved root surfaces using a scanning electron microscope (SEM). METHODS: Thirty-two teeth with severe periodontal disease scheduled for extraction were divided into three groups: group A was irradiated with an energy of 140 mJ, 10 Hz; group B with 160 mJ 10 Hz; group C was used as controls. Morphological changes on the treated root surfaces were evaluated using SEM observations to assess laser-induced ultrastructural changes. RESULTS: All surfaces treated in both groups showed a homogeneous and smooth root surface morphology. The surface alterations were very similar with both energy values used. CONCLUSION: Er:YAG laser irradiation performed with two different power settings of root surfaces in vivo showed at the SEM observation a complete absence of debris and smooth root surfaces.

Dental Calculus↗

PubMed2004

Bucco-lingual crestal bone changes after immediate and delayed implant placement.

BACKGROUND: Implants placed immediately after tooth extraction offer several advantages, but many authors have reported problems in filling the residual gap between the implant and the socket walls. Barrier and grafting techniques have been tested and yield varying results, so it has been suggested that the timing of implant placement may be important for success. The aim of this study was to analyze bone healing and coronal bone remodeling around 35 implants, 20 placed immediately after tooth removal and 15 placed 6 to 8 weeks after extraction. METHODS: All the implants were submerged and placed within the alveoli confines, leaving circumferential defects because the implants did not contact the bone at their coronal aspects; stabilization was achieved in the bone apically. After implant placement the mean distance from buccal bone to lingual bone was 10 mm (SD 1.522) for immediate implants and 8.86 mm (SD 2.356) for delayed implants. No membrane or filling materials were used. Primary flap closure was accomplished in all cases. RESULTS: At second-stage surgery all peri-implant defects were filled, and the mean distance from buccal bone to lingual bone was 8.1 mm (SD 1.334) for immediate implants and 5.8 mm (SD 1.265) for delayed implants. This pattern of coronal bone remodeling, showing a narrowing of the bucco-lingual width, was clinically similar for the two groups, although it should be noted that the delayed implants exhibited smaller bucco-lingual bone width already at the first measurement: it can be speculated that early remodeling may start immediately after tooth extraction and continue, non-uniformly, even after delayed implant placement. CONCLUSIONS: This study suggests that circumferential defects could heal clinically without any guided bone regeneration (GBR) in both experimental groups, and that the procedure was virtually free from complications in the postoperative period, probably because of the absence of barrier membranes and/or grafting materials. Histologically, peri-implant defects of over 1.5 mm heal by connective tissue apposition, rather than by direct bone-to-implant contact, but clinically this healing may be very successful. No histological analysis was carried out in the present study, but even the largest residual gaps were filled with hard tissue that could not be probed. Thus, such outcomes can be considered clinically successful. The different rate of bone remodeling around immediate or delayed implants could have implications for the preferred timing of implant placement in sites of high esthetic concern.

Adolescent↗

PubMed2004

Immediate implants supporting single crown restoration: a 4-year prospective study.

BACKGROUND: The placement of implants at the time of tooth extraction has several clinical advantages, such as preservation of the alveolar ridge width and height and reduction of the restorative treatment time. The aim of this study was to evaluate the cumulative success rate of dental implants placed in fresh extraction sockets with and without guided bone regeneration (GBR) used to support a single crown restoration. All of the patients were preselected as candidates for implants. METHODS: Ninety-five patients aged 20 to 68 years with 163 implants were included. All patients were partially edentulous and participated in a personally tailored recall schedule. The follow-up period was 48 months. Patients underwent a clinical and radiographic evaluation annually. RESULTS: The 4-year cumulative success rate was 97%. Five of the 163 implants failed, two during the initial healing time, which were considered early failures and three a year after prosthetic rehabilitation, which were considered late failures. No failure of prosthetic rehabilitation was observed. CONCLUSIONS: Implants placed into fresh extraction sockets with or without regenerative procedures and used to support single crown prosthesis showed a very high cumulative success rate (97%) in a 4-year prospective study. Several observations should be made: 1) all the patients were preselected as candidates for implants and were following a strict oral hygiene regimen; 2) all efforts were made to reduce the number of cases requiring GBR procedures; 3) all the implants had an acid etched/sandblasted implant surface; and 4) all the prosthetic restorations were single crowns.

Adult↗

PubMed2003

Radiographic bone density around immediately loaded oral implants.

OBJECTIVES: The aim of this study was to analyze the bone density around immediately loaded oral implants by a new volumetric CT scan (Maxiscan) and to compare it with that of unloaded implants. MATERIAL AND METHODS: Four patients with an age range from 44 to 65 years old were selected for this study. All the patients needed a prosthetic rehabilitation in partially edentulous posterior maxillas or mandibles. A total of 12 oral implants were placed in the four patients. Six of these implants were immediately loaded while six were left unloaded. Six months after placement, immediately loaded and unloaded oral implants were analyzed by a volumetric CT scan. RESULTS: The overall success rate in this study with immediately loaded oral implants was 100%. The radiological assessments showed that the mean densitometric profile, which is a measure of bone mineralization, was higher in the immediately loaded group than in the unloaded group. The differences observed between the two groups of oral implants (immediately loaded and unloaded) were statistically significant (P<0.05). The bone was significantly more dense around immediately loaded than unloaded oral implants on the basis of a radiological assessment. CONCLUSION: The innovative aspect of this clinical study is to propose a new method to analyze the bone density, reducing the need for histological analysis from human biopsy.

Absorptiometry, Photon↗

PubMed2003

Bucco-lingual bone remodeling around implants placed into immediate extraction sockets: a case series.

BACKGROUND: Implants placed immediately after tooth extraction have shown high percentages of clinical success. Few studies in the scientific literature have observed the horizontal bone remodeling in the buccal-lingual direction after immediate placement of implants. The aim of this study was to analyze bone healing and coronal bone remodeling around 15 implants placed immediately after tooth removal without the use of guided bone regeneration (GBR) techniques. METHODS: Ten patients received a total of 15 implants placed immediately after removal of 15 single-rooted teeth. All implants were placed within the alveolar confines, limiting, in most cases, small peri-implant bone defects. After implant placement, the distance from the buccal to lingual bone plate was measured. No membranes or filling materials were used. Primary flap closure was performed in all cases. RESULTS: At second-stage surgery, all peri-implant defects were completely filled and the distance from buccal to lingual bone was measured again. The pattern of bone healing around the neck of immediate implants showed an absence of peri-implant defects and a narrowing of bone crest width in a buccal-lingual direction. The mean distance between buccal bone and lingual bone at the time of implant placement was 10.5 mm (+/- 1.52) and, at second-stage surgery, 6.8 mm (+/- 1.33). CONCLUSIONS: The coronal bone remodeling around immediate implants showed a healing pattern with new bone apposition around the neck of the implants and, at the same time, bone resorption with horizontal width reduction of the bone ridge. The small peri-implant bone defects were completely healed without the use of GBR procedures. An absence of complications during the healing period was also observed, probably due to the absence of barrier membranes and grafting materials.

Adolescent↗

PubMedDate not supplied

Soft tissue healing around implants placed immediately after tooth extraction without incision: a clinical report.

PURPOSE: The purposes of the present study were to evaluate implants placed immediately after tooth extraction without incision or primary flap closure and to observe the peri-implant soft tissue healing. MATERIALS AND METHODS: Fifteen patients (9 men and 6 women) aged 31 to 54 years were included in this study. Each patient had a tooth that required extraction, and each had at least 4 mm of bone beyond the root apex. Teeth with multiple roots were excluded from this study. After tooth extraction, the implants were immediately placed without incision or flap elevation. Implant sites showing bone fenestrations, bone dehiscences, or peri-implant bone defects exceeding 2 mm were excluded from this study. In these cases, a standard guided bone regeneration procedure with a surgical flap elevation was used. The second-stage surgical procedure was performed 6 months after the first procedure. The following clinical parameters were evaluated at the time of implant placement and at second-stage surgery: levels of mesial and distal papillae, width of keratinized mucosa, position of mucogingival junction relating to the surrounding tissues, and peri-implant radiolucency and marginal bone loss, which were evaluated radiographically. RESULTS: The postsurgical healing period was uneventful for all patients. Soft tissue closure over the implant sites was achieved in 1 to 3 weeks after surgery at all sites. At second-stage surgery, no peri-implant bone defects were observed or detected by probing around all the experimental implants. The soft tissue anatomy was considered clinically acceptable in all patients. DISCUSSION AND CONCLUSION: Successful osseointegration and complete bone healing were observed for all patients. The soft tissue healing and morphology were satisfactory; additional mucogingival surgery was not required before definitive prosthetic rehabilitation.

Adult↗

PubMedDate not supplied

Immediate restoration of single-tooth implants in mandibular molar sites: a 12-month preliminary report.

PURPOSE: The aim of this prospective clinical study was to evaluate the survival rates at 12 months of transmucosal implants placed in the posterior mandible and immediately restored with single crowns. MATERIALS AND METHODS: Thirty ITI dental implants with sandblasted, acid-etched surfaces were placed in 30 patients missing at least 1 mandibular molar and immediately restored if acceptable primary stability was attained. Primary stability was measured with resonance frequency analysis (RFA) using the Osstell device, and only implants with a stability quotient greater than 62 were included in the study. RFA measurement and radiographic assessment were made at baseline and 6 months after implant placement. Plaque Index, Bleeding Index, probing depth, attachment level, and width of keratinized tissue were measured at the 12 month follow-up examination. RESULTS: At 12 months, only 1 implant had been lost; it was removed because of acute infection. Radiographic as well as clinical examination confirmed osseointegration of all implants, with a survival rate of 96.7%. DISCUSSION: Interestingly, implant stability as measured using RFA did not increase significantly from baseline to 12 months (P > .05). CONCLUSION: The present study showed that immediate restoration of transmucosal implants placed in the mandibular area with good primary stability can be a safe and successful procedure. However, larger, long-term clinical trials are needed to confirm the present results.

Adult↗

PubMedDate not supplied

Maxillary sinus augmentation: histologic and histomorphometric analysis.

PURPOSE: Implant placement in the posterior maxilla may often be contraindicated because of insufficient bone volume and the presence of the maxillary sinus. In these situations, sinus floor lifting and grafting frequently have been proposed as the best treatment. The aim of this study was to compare histologically the use of 100% autogenous bone versus a combination of autogenous bone and corticocancellous pig bone for maxillary sinus augmentation. MATERIALS AND METHODS: Eighteen patients requiring bilateral maxillary sinus augmentation were selected for this study. Bone for grafting was harvested from the iliac crest. Each patient received 100% autogenous bone in 1 randomly selected sinus (control side) and a 1:1 mixture of autogenous bone and corticocancellous pig bone particles in the contralateral sinus (test side). Five months after the augmentation procedure, bone biopsy specimens were taken at the time of implant placement. RESULTS: No complications were observed during the surgical procedures; all patients healed uneventfully. No signs or symptoms of maxillary sinus disease were observed during the 5 months after surgery. No significant differences in bone percentages were observed in the bone biopsies from test and control sides. DISCUSSION AND CONCLUSION: It could be concluded from this study that corticocancellous pig bone particles can be successfully used in a 1:1 mixture with autogenous bone from the iliac crest for maxillary sinus augmentation in cases of severely atrophic maxilla.

Adult↗

PubMedDate not supplied

A clinical study of the outcomes and complications associated with maxillary sinus augmentation.

PURPOSE: The aim of this study was to evaluate the rate of complications in maxillary sinus augmentation surgery and the impact of complications on subsequent implant treatment in a patient population with severe maxillary atrophy scheduled for treatment under general anesthesia. MATERIALS AND METHODS: The study population consisted of 70 patients (124 sinuses) with severe maxillary atrophy who underwent maxillary sinus augmentation. Sixteen patients were scheduled to have a unilateral procedure and 54 patients a bilateral procedure. Sinus augmentation was performed with autogenous bone alone in 93 sinuses; in 31 sinuses, a 1:1 mixture of autogenous bone and corticocancellous pig bone particles was used. Twenty-six of 124 procedures involved both sinus augmentation and autogenous block grafting for the treatment of severely atrophic maxillae. RESULTS: The most common intraoperative complication was the perforation of the sinus membrane, which was observed in 31 sinuses (25%). Seven (5.6%) sinuses in 7 patients exhibited suppuration of the maxillary sinus. Five of the 7 patients with sinus infection were smokers, showing a prevalence of complications significantly greater in smokers compared to nonsmokers. Moreover, the use of an onlay bone graft in conjunction with sinus augmentation appeared to significantly increase the rate of infective complications. Infections were treated by drainage and the administration of systemic antibiotics. Two clinical cases showing persistent signs of infection required an endoscopic inspection of the maxillary sinus. DISCUSSION AND CONCLUSION: In the present study sinus membrane perforation was not shown to be a significant factor in the rate of implant complications. However, the combination of smoking and onlay bone grafting could significantly increase the rate of postoperative infection following sinus grafting.

Adult↗

PubMedDate not supplied

Osteoblast attachment on titanium disks after laser irradiation.

PURPOSE: Osteoblast attachment on titanium surfaces is necessary to achieve new bone formation and osseointegration. The purpose of this study was to examine osteoblast attachment on irradiated titanium disks. MATERIALS AND METHODS: Machined, hydroxyapatite (HA)-coated, sandblasted, and titanium plasma-sprayed (TPS) surfaces were irradiated with either a carbon dioxide (CO2) or an Er,Cr:YSGG laser. A control group of nonirradiated disks was also examined. Osteoblast cultures were cultivated on the titanium disks and examined with scanning electron microscopy. RESULTS: The findings demonstrated that osteoblasts could be grown on all of the surfaces. Pseudopodia and a spread of cells that demonstrated maturation were observed on the lased irradiated titanium disks. CONCLUSIONS: The data show that laser irradiation of titanium surfaces may promote osteoblast attachment and further bone formation.

Cell Adhesion↗