PubMed Health⌕ Search

Biomedical subjects

Antonio Laguna

Publications and source records attributed to Antonio Laguna.

At least 19 recordsLinked to original sources
PubMed2007

Highly luminescent gold(I)-silver(I) and gold(I)-copper(I) chalcogenide clusters.

The reactions of [AuClL] with Ag(2)O, where L represents the heterofunctional ligands PPh(2)py and PPh(2)CH(2)CH(2)py, give the trigoldoxonium complexes [O(AuL)(3)]BF(4). Treatment of these compounds with thio- or selenourea affords the triply bridging sulfide or selenide derivatives [E(AuL)(3)]BF(4) (E=S, Se). These trinuclear species react with Ag(OTf) or [Cu(NCMe)(4)]PF(6) to give different results, depending on the phosphine and the metal. The reactions of [E(AuPPh(2)py)(3)]BF(4) with silver or copper salts give [E(AuPPh(2)py)(3)M](2+) (E=O, S, Se; M=Ag, Cu) clusters that are highly luminescent. The silver complexes consist of tetrahedral Au(3)Ag clusters further bonded to another unit through aurophilic interactions, whereas in the copper species two coordination isomers with different metallophilic interactions were found. The first is analogous to the silver complexes and in the second, two [S(AuPPh(2)py)(3)](+) units bridge two copper atoms through one pyridine group in each unit. The reactions of [E(AuPPh(2)CH(2)CH(2)py)(3)]BF(4) with silver and copper salts give complexes with [E(AuPPh(2)CH(2)CH(2)py)(3)M](2+) stoichiometry (E=O, S, Se; M=Ag, Cu) with the metal bonded to the three nitrogen atoms in the absence of AuM interactions. The luminescence of these clusters has been studied by varying the chalcogenide, the heterofunctional ligand, and the metal.

Journal Article↗
PubMed2006

Catena-poly[[(trifluoromethanesulfonato-kappaO)silver(I)]-mu-di-2-pyridylamine-kappa2N2:N2'], a chain polymer with short Ag...C contacts.

The title compound, [Ag(CF3O3S)(C10H9N3)]n, is a chain polymer in which neighbouring monomeric units are related by a glide plane. The silver centre is four-coordinate; the donor atoms are one trifluoromethanesulfonate O atom and one pyridine N atom from each of two symmetry-related dipyridylamines, and an additional and unexpected Ag...C contact [2.6464 (16) A] is observed to a pyridine C atom. The chains are reinforced by one classical N-H...O and two 'weak' C-H...O hydrogen bonds.

Journal Article↗
PubMed2006

Group 11 complexes with the bis(3,5-dimethylpyrazol-1-yl)methane ligand. How secondary bonds can influence the coordination environment of Ag(I): the role of coordinated water in [Ag2(mu-L)2(OH2)2](OTf)2.

The complexation properties of the ligand bis(3,5-dimethylpyrazol-1-yl)methane (L) towards group 11 metals have been studied. The reaction in a 1 : 1 molar ratio with [Cu(NCMe)4]PF6 or Ag(OTf) complexes gives the mononuclear [CuL(NCMe)]PF6 (1), with crystallographic mirror symmetry, or dinuclear [Ag2(mu-L)2](OTf)2 (2) (OTf = trifluoromethanesulfonate) in which the ligand bridges both silver centres, an unprecedented mode of coordination for this type of ligands. Compound 2 crystallizes with two water molecules and forms a supramolecular structure through classical hydrogen bonding. The reaction in a 2 : 1 ratio affords in both cases the four-coordinated derivatives [ML2]X (M = Cu, X = PF6 (3); Ag, X = OTf 4). The treatment of [Ag(OTf)(PPh3)] with the ligand L gives [AgL(PPh3)]OTf (5). The gold(I) derivative [Au2(C6F5)2(mu-L)] (6) has also been obtained by reaction of L with two equivalents of [Au(C6F5)(tht)]. These complexes present a luminescent behaviour at low temperature; the emissions being mainly intraligand but enhanced after coordination of the metal. Compounds 1-4 have been characterized by X-ray crystallography. DFT studies showed that, in the silver complex 2, coordination of H2O to Ag in the binuclear complex is favoured by formation of a hydrogen-bonding network, involving the triflato anion, and releasing enough energy to allow distortion of the Ag2 framework.

Journal Article↗
PubMed2006

Synthesis, coordination to Au(I) and photophysical properties of a novel polyfluorinated benzothiazolephosphine ligand.

The reaction between Ph2PH and C6F5CNS leads to the formation of the polyfluorinated benzothiazolephosphine ligand Ph2P(CNS)(C6F4) 1. The mechanism of the reaction involves the addition of the phosphine to the isothiocyanate and subsequent intramolecular nucleophilic aromatic substitution. This new ligand reacts with gold(I) substrates producing complexes [AuCl{Ph2P(CNS)(C6F4)}] 2 and [Au(C6F5){Ph2P(CNS)(C6F4)}] 3. Both the ligand 1 and complexes 2 and 3 display phosphorescence with emissions arising from n(P) -->pi*(heterocyclic ring) excited state for 1 and pi-->pi*(heterocyclic ring) excited state for 2 and 3. DFT and TD-DFT calculations agree with these results.

Journal Article↗
PubMed2006

From diphosphane to diphosphodiide gold(III) derivatives of 1,2-diphosphinobenzene.

Treatment of 1,2-diphosphinobenzene with [Au(C6F5)3(tht)] leads to the diphosphane derivative [{Au(C6F5)3}(1,2-PH2C6H4PH2)] (1), which further reacts with other pentafluorophenylgold(III) reagents in the presence of acetylacetonate as deprotonating agent to afford phosphane-phosphide complexes. The noncyclic PPN[{Au(C6F5)3}2(1,2-PHC6H4PH2)] (2; PPN = bis(triphenylphosphine)iminium) has been shown to be a useful starting material for the synthesis of higher nuclearity cyclic or noncyclic diphosphide or even diphosphodiide derivatives through similar reactions. The crystal structures of the trinuclear anionic NBu4[{Au(C6F5)3}(1,2-PHC6H4PH){Au(C6F5)2Cl}{mu-Au(C6F5)2}] (3) and the hexanuclear [{Au(C6F5)3}(1,2-PC6H4P){Au(C6F5)3}{mu-M(dppe)M}2] (M = Au (12), Ag (13)) have been established by X-ray diffraction methods, the last complexes having a bicyclic ring containing three intramolecular interactions between the M(I) centres.

Journal Article↗
PubMed2006

Synthesis, structural characterization, and theoretical studies of gold(I) and gold(I)-gold(III) thiolate complexes: quenching of gold(I) thiolate luminescence.

The gold(I) thiolate complexes [Au(2-SC6H4NH2)(PPh3)] (1), [PPN][Au(2-SC6H4NH2)2] (2) (PPN = PPh3=N=PPh3), and [{Au(2-SC6H4NH2)}2(mu-dppm)] (3) (dppm = PPh2CH2PPh2) have been prepared by reaction of acetylacetonato gold(I) precursors with 2-aminobenzenethiol in the appropriate molar ratio. All products are intensely photoluminescent at 77 K. The molecular structure of the dinuclear derivative 3 displays a gold-gold intramolecular contact of 3.1346(4) A. Further reaction with the organometallic gold(III) complex [Au(C6F5)3(tht)] affords dinuclear or tetranuclear mixed gold(I)-gold(III) derivatives with a thiolate bridge, namely, [(AuPPh3){Au(C6F5)3}(mu2-2-SC6H4NH2)] (4) and [(C6F5)3Au(mu2-2-SC6H4NH2)(AudppmAu)(mu2-2-SC(6)H4NH2)Au(C6F5)3] (5). X-ray diffraction studies of the latter show a shortening of the intramolecular gold(I)-gold(I) contact [2.9353(7) or 2.9332(7) A for a second independent molecule], and short gold(I)-gold(III) distances of 3.2812(7) and 3.3822(7) A [or 3.2923(7) and 3.4052(7) A] are also displayed. Despite the gold-gold interactions, the mixed derivatives are nonemissive compounds. Therefore, the complexes were studied by DFT methods. The HOMOs and LUMOs for gold(I) derivatives 1 and 3 are mainly centered on the thiolate and phosphine (or the second thiolate for complex 2), respectively, with some gold contributions, whereas the LUMO for derivative 4 is more centered on the gold(III) fragment. TD-DFT results show a good agreement with the experimental UV-vis absorption and excitation spectra. The excitations can be assigned as a S --> Au-P charge transfer with some mixture of LLCT for derivative 1, an LLCT mixed with ILCT for derivative 2, and a S --> Au...Au-P charge transfer with LLCT and MC for derivative 3. An LMCT (thiolate --> Au(III) mixed with thiolate --> Au-P) excitation was found for derivative 4. The differing nature of the excited states [participation of the gold(III) fragment and the small contribution of sulfur] is proposed to be responsible for quenching the luminescence.

Crystallography, X-Ray↗
PubMed2005

Au(I)...Ag(I) metallophilic interactions between anionic units: theoretical studies on a AuAg4 square pyramidal arrangement.

We have studied theoretically the organometallic compound (NBu4)2[Au(3,5-C6F3Cl2)2Ag4(CF3CO2)5], whose dianionic part displays a AuAg4 square pyramidal arrangement based on closed-shell Au(I)...Ag(I) interactions between two monoanionic fragments. DFT/B3LYP, ab initio Hartree-Fock (HF), and second-order Møller Plesset perturbation theory (MP2) calculations have been carried out for simplified model systems. Model system [AuPh2]-...[Ag4(CO2H)5]- (C1) has been chosen from DFT results as an appropriate model for the study of the interactions. The four Au(I)...Ag(I) interactions and two additional C...Ag(I) interactions are observed when dispersion-type interactions are considered in the level of theory (MP2) displaying a metallophilic attraction between two anionic units. The study of model C2 (similar to C1 but with minimized C...Ag(I) interactions) permits the study of the Au(I)...Ag(I) interactions separately, which confirms the existence of stabilizing Au(I)...Ag(I) interactions around 13 kJ.mol(-1) each.

Journal Article↗
PubMed2005

Phosphorescent excited state of [Au2[(Ph2Sb)2O]3]2+: Jahn-Teller distortion at only one gold(I) center.

Dinuclear three-coordinate Au(I) complex [Au2{(Ph2Sb)2O}3](ClO4)2 1 displays an interesting phosphorescent behavior in which a large Stokes' shift is observed. Ab initio calculations show that the main distortion for the first triplet excited state, which is responsible for the luminescence behavior of complex 1, is a Jahn-Teller distortion for only one of the Au(I) centers together with a gold-gold distance shortening. This behavior could be extrapolated to other phosphorescent dinuclear three-coordinate Au(I) complexes.

Antimony↗
PubMed2005

A family of Au-Tl loosely bound butterfly clusters.

By treatment of the polymeric species [AuTl(C6Cl5)2]n with ketones or with acetylacetone and 4,4'-bipyridine, the new tetranuclear complexes [Au2Tl2(C6Cl5)4] x L (L = PhMeC=O, acacH) or [Au2Tl2(C6Cl5)4(bipy)] x (acacH) have been prepared. Their crystal structures have been determined by X-ray diffraction methods and they all present a central Au2Tl2 core formed via one Tl...Tl and four Au...Tl unsupported interactions resulting in a loosely bound butterfly cluster. These complexes are strongly luminescent in both the solid state and solution showing an optical behavior in agreement with the maintenance of the Tl...Tl contact even in solution.

Journal Article↗
PubMed2005

Group 11 complexes with unsymmetrical P,S and P,Se disubstituted ferrocene ligands.

The reaction of the unsymmetrical ligands 1-diphenylphosphino-1'-(phenylsulfanyl)ferrocene and 1-diphenylphosphino-1'-(phenylselenyl)ferrocene, Fc(EPh)PPh2(E = S, Se), with several group 11 metal derivatives leads to the synthesis of complexes of the type [MX{Fc(EPh)PPh2}](M = Au, X = Cl, C6F5; M = Ag, X = OTf), (OTf = trifluoromethanesulfonate), [M{Fc(EPh)PPh2}2]X (M = Au, X = ClO4; M = Ag, X = OTf), [M(PPh3){Fc(EPh)PPh2}]OTf (M = Au, Ag), [Au2{Fc(SPh)PPh2}2](ClO4)2, [Au(C6F5)2{Fc(SePh)PPh2}]ClO4, [Au(C6F5)3{Fc(EPh)PPh2}], [Au2(C6F5)6{Fc(SePh)PPh2}] or [Cu{Fc(EPh)PPh2}2]PF6(E = S, Se). In these complexes coordination depends upon the metal centre; with gold it takes place predominantly to the phosphorus atom and with silver and copper to both phosphorus and chalcogen atoms. The treatment of some of the gold complexes with other metal centres affords heterometallic derivatives that in some cases are in equilibrium with the homometallic derivatives. Several compounds have been characterized by X-ray diffraction, four pairs of homologous compounds, yet not a single pair is isotypic. In many of them a three dimensional network is formed through secondary bonds such as hydrogen bonds, Au...Cl or Au...Se interactions. The complex [Ag(OTf){Fc(SePh)PPh2}] forms one-dimensional chains through trifluoromethanesulfonate bridging ligands.

Crystallography, X-Ray↗
PubMed2005

Columnar mesomorphic organizations in cyclotriphosphazenes.

A synthetic strategy has been developed to prepare cyclotriphosphazenes that bear polycatenar aromatic esters as promesogenic units linked to phosphorus atoms. The microsegregation of the rigid and flexible parts of the system and the space-filling properties are the driving forces that determine the kind of mesomorphism exhibited by the organocyclotriphosphazenes. Mesogenic units that contain only one terminal alkyl chain give rise to calamitic mesomorphism, since the molecules are arranged to give a cylindrical superstructure with the aromatic promesogenic cores elongated in a manner approximately perpendicular to the cyclotriphosphazene ring. On the other hand, mesogenic units that contain three long terminal chains exhibit columnar mesophases. In this case, a discotic structure consisting of promesogenic cores arranged approximately parallel to the cyclotriphosphazene ring can explain the columnar organization. The X-ray diffraction patterns corresponding to the Col(h) mesophase of the cyclotriphosphazene with dodecyloxy chains (8) indicate the presence of helical ordering, which was confirmed for a homologous compound bearing stereogenic centers on two of the terminal chains (11). All of the synthesized phosphazenes show a high thermal stability.

Crystallography, X-Ray↗
PubMed2005

Unprecedented eta3-M3 coordination mode in a terpyridine ligand.

The gold(I) complex [Au3(C6F5)3(eta3-Fcterpy)](Fcterpy = 4'-ferrocenyl-2,2'ratio6',2''-terpyridine) represents the first example of a terpyridine ligand bonded to three different metals. The aurophilic interactions present in the molecule may contribute to the overall stability of the system, as was shown by DFT calculations. The positive Mayer indices (0.152 and 0.138), as well as the magnitude of the binding interaction between terpy and the Au(I)L fragments, support this interpretation.

Journal Article↗
PubMed2005

Tunable photoluminescence of closed-shell heterobimetallic Au-Ag dicyanide layered systems.

The excited-state properties of the layered La[Ag(CN)(2)](3) and La[Au(CN)(2)](3) systems have been examined and compared with mixed-metal systems of varying metal ratios such as La[Ag(0.78)Au(0.22)(CN)(2)](3), La[Ag(0.55)Au(0.45)(CN)(2)](3), La[Ag(0.33)Au(0.67)(CN)(2)](3), and La[Ag(0.19)Au(0.81)(CN)(2)](3). We have found that these mixed-metal systems luminesce quite strongly at room temperature at an energy that is tunable and depends on the Au:Ag stoichiometric ratio. The emission energy of the mixed-metal samples lies between those of the pure Au and Ag systems. This provides evidence that the excited states responsible for this emission are delocalized over the Ag and Au centers. The strong luminescence of the mixed-metal systems at ambient temperatures is in stark contrast to the weak luminescence behavior of pure La[Au(CN)(2)](3) and La[Ag(CN)(2)](3) samples, which makes the mixed-metal systems more viable than the pure systems for practical applications.

Journal Article↗
PubMed2005

Unsupported gold(I)-copper(I) interactions through eta1 Au-[Au(C6F5)2]- coordination to Cu+ Lewis acid sites.

The reaction of the complex [Au2Ag2(C6F5)4)N[triple bond]CCH3)2]n (1) with 1 equiv of CuCl in the presence of 1 equiv of pyrimidine ligand leads to the formation of the heteronuclear Au(I)-Cu(I) organometallic polymer [Cu{Au(C6F5)2}(N[triple bond]CCH3)(mu2-C4H4N2)]n (2) through a transmetalation reaction. Complex 2 displays unprecedented unsupported Au(I)...Cu(I) interactions of [Au(C6F5)2]- units with the acid Cu(I) sites in a [Cu(N[triple bond]CCH3)(mu2-pyrimidine)]n+(n) polymeric chain. Complex 2 has a rich photophysics in solution and in the solid state.

Journal Article↗
PubMed2004

Selenolate gold complexes with aurophilic Au(I)-Au(I) and Au(I)-Au(III) interactions.

The gold(I) selenolate compound [Au(2)(SePh)(2)(mu-dppf)] (dppf = 1,1'-bis(diphenylphosphino)ferrocene) has been prepared by reaction of [Au(2)Cl(2)(mu-dppf)] with PhSeSiMe(3) in a molar ratio 1:2. This complex reacts with gold(I) or gold(III) derivatives to give polynuclear gold(I)-gold(I) or gold(I)-gold(III) complexes of the type [Au(4)(mu-SePh)(2)(PPh(3))(2)(mu-dppf)](OTf)(2), [Au(3)(C(6)F(5))(3)(mu-SePh)(2)(mu-dppf)], or [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)], with bridging selenolate ligands. The reaction of [Au(2)(SePh)(2)(mu-dppf)] with 1 equiv of AgOTf leads to the formation of the insoluble Ag(SePh) and the compound [Au(2)(mu-SePh)(mu-dppf)]OTf. The complexes [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)] and [Au(2)(mu-SePh)(mu-dppf)]OTf (two different solvates) have been characterized by X-ray diffraction studies and show the presence of weak gold(I)-gold(III) interactions in the former and intra- and intermolecular gold(I)-gold(I) inter-actions in the later.

Journal Article↗
PubMed2004

Intensely luminescent gold(I)-silver(I) cluster complexes with tunable structural features.

A new series of isostructural, brilliantly luminescent gold-silver complexes having the formula [Au3(mu3-E)Ag(PPh2py)3](BF4)2 where E = O, S, Se and Ph2Ppy = 2-diphenylphosphinopyridine has been synthesized and characterized. The structural core of these complexes is a Au3Ag metallophilically linked tetrahedron with a group-16 atom functioning as a mu3-ligand capping the three gold atoms. In the solid state, pairs of clusters are joined by two unsupported aurophilic interactions. The emission energy changes strikingly in going from O (blue) to S (yellow) and Se (orange). The luminescence from the E = O system is the first to be reported for a gold(I) oxo system. Additionally, the luminescent 4-methylpyridyl analogue with E = S has been prepared and structurally characterized. For E = S, Se, the change in emission energy with mu3-bridging atom provides a sound basis for an LMMCT assignment of the excited state while lifetime measurements support its spin-forbidden nature. Frozen glass measurements indicate the presence of a higher-energy emitting state for these systems, and for the E = O system, either LMMCT or metal-centered cluster-based emission can be proposed.

Journal Article↗
PubMed2004

A detailed study of the vapochromic Behavior of [Tl[Au(C6Cl5)2]]n.

The linear-chain polymer [Tl[Au(C(6)Cl(5))(2)]](n), 1, reacts in the solid state and in solution with different volatile organic compounds such as tetrahydrofuran, acetone, tetrahydrothiophene, 2-fluoropyridine, acetonitrile, acetylacetone, and pyridine. Solid-state exposure of 1 to vapors of the above VOCs produces a selective and reversible change in its color that is perceptible to the human eye and even deeper under UV irradiation, allowing 1 to function as a sensor for these VOCs. Heating the samples exposed to the VOCs for a few minutes at 100 degrees C regenerates the original material without degradation, even after several exposure/heating cycles. The reversibility is further confirmed by X-ray powder diffraction measurements of complex 1 before and after exposure to vapors and again after heating the samples. The products obtained by reactions of complex 1 with the above VOCs as ligands in solution contain extended linear chains of alternating gold and thallium centers with two molecules of the organic ligands attached to each thallium atom. The stoichiometry of these materials has been confirmed by single-crystal X-ray diffraction as [Tl(THF)(2)[Au(C(6)Cl(5))(2)]](n), 3, and [Tl(acacH)(2)[Au(C(6)Cl(5))(2)]](n), 5. Comparison of FT-IR, UV-vis, and luminescence spectra at room temperature and at 77 K of the solid samples of complexes 2-9 with the spectra of complex 1 after its exposure to VOCs suggests interaction occurs between the organic VOCs and thallium in each case. Thermogravimetric analyses data indicate that all the thallium centers in these derivatives of complex 1 are neither fully nor equally coordinatively saturated. The materials formed appear to be intermediates between complex 1 with no VOCs attached and complexes 3-9 which contain two organic ligands coordinated to each thallium. A crystal structure analyses of one of these intermediates, [Tl(THF)(0.5)[Au(C(6)Cl(5))(2)]](n), 1.0.5THF, confirms this. Density functional calculations are in accord with the observed experimental results. Analysis reveals a substantial participation of the metal atoms in transitions that give rise to the observed emissions. Crystallographic data are as follows. For 1.0.5THF: triclinic, P1, a = 8.9296(1) A, b = 11.2457(1) A, c = 21.2465(3) A, alpha = 96.7187(7) degrees, beta = 92.5886(6) degrees, gamma = 98.5911(8) degrees, V = 2090.87(4) A(3), and Z = 2. For 3: monoclinic, P2(1)/c, a = 26.4163(6) A, b = 12.1619(2) A, c = 28.0813(6) A, alpha = 90 degrees, beta = 161.9823(6) degrees, gamma = 90 degrees, V = 2790.51(10) A(3), and Z = 4. For 5: monoclinic, P2(1)/c, a = 9.8654(2) A, b = 29.8570(5) A, c = 11.6067(2) A, alpha = 90 degrees, beta = 114.5931(6) degrees, gamma = 90 degrees, V = 3108.64(10) A(3), and Z = 4.

Journal Article↗