Biomedical subjects

Antonio Scarano

Publications and source records attributed to Antonio Scarano.

At least 19 recordsLinked to original sources

PubMed2006

Jaw reconstruction with grafted autologous bone: early insertion of osseointegrated implants and early prosthetic loading.

PURPOSE: The aim of the present pilot study was to evaluate the behavior of grafted iliac bone placed in atrophic alveolar ridges, when osseointegrated implants were inserted early (2 months after grafting) and when prosthetic loading was anticipated (2 months after fixture insertion). PATIENTS AND METHODS: Dental panoramic x-rays and computed tomography (CT) scans were carried out before the grafting procedure, after implant placement, and after prosthetic loading (after 30 months). RESULTS: Grafted bone tissue showed a resorption of about 21.8%. Clinical evaluation of implant therapy following Melloning and Triplett criteria showed 91% success considering the total number of implants inserted. CONCLUSION: The follow-up at 6, 12, and 30 months after fixed prostheses placement showed that early implant insertion and early prosthetic loading can lead to better results than those obtained from standard protocols.

Adult↗

PubMed2006

Maxillary sinus augmentation with different biomaterials: a comparative histologic and histomorphometric study in man.

OBJECTIVE: Rehabilitation of the edentulous posterior maxilla with dental implants can be difficult because of insufficient bone volume caused by pneumatization of the maxillary sinus and crestal bone resorption. Different biomaterials have been used for sinus augmentation. The aim of the study was to compare different materials in maxillary sinus augmentation in man. METHODS: A total of 94 patients participated in this study. Inclusion criteria were maxillary partial (unilateral or bilateral) edentulism involving the premolar/molar areas, and the presence of 3-5-mm crestal bone between the sinus floor and alveolar ridge. A total of 362 implants were inserted. There were 9 biomaterials used in the sinus augmentation procedures. Each patient underwent 1 biopsy after 6 months. A total of 144 specimens were retrieved. RESULTS: None of the 94 patients had complications. All implants were stable, and x-ray examination showed dense bone around the implants. Mean follow-up was 4 years. There were 7 implants that failed. Histologic resultsshowed that almost all the particles of the different biomaterials (i.e., autologous bone, demineralized freeze-dried bone allograft Biocoral [Inoteb, St. Gonnery, France], Bioglass [US Biomaterials, Alachua, FL], Fisiograft [Ghimas, Bologna, Italy], PepGen P-15 [Dentsply Friadent CeraMed, Lakewood, CO], calcium sulfate, Bio-Oss [Geistlich Pharma AG, Wohlhusen, Switzerland], and hydroxyapatite) were surrounded by bone. Some biomaterials were more resorbable than others. Included are the histomorphometry clarified features of the newly formed bone around the different grafted particles. CONCLUSION: All biomaterials examined resulted in being biocompatible and seemed to improve new bone formation in maxillary sinus lift. No signs of inflammation were present. The data are very encouraging because of the high number of successfully treated patients and the good quality of bone found in the retrieved specimens.

Aged↗

PubMed2006

Histologic evaluation of 3 retrieved immediately loaded implants after a 4-month period.

OBJECTIVE: To perform a histologic and histomorphometric analysis of the peri-implant tissue reactions and bone-titanium interface in 3 immediately loaded (provisional loaded) titanium implants retrieved from a man after a loading period of 4 months. MATERIALS & METHODS: A 35-year-old patient with a maxillary partial edentulism did not want to wear a provisional removable prosthesis during the healing period. It was decided to insert 3 definitive implants and use 3 provisional implants for the transitional period. The provisional implants were loaded the same day with a resin prosthesis in occlusal contact. During the second surgical phase, after 4 months, the provisional prosthesis was removed, and the provisional implants were retrieved with a trephine bur. Before retrieval, all implants appeared to be clinically osseointegrated. The specimens were processed for observation under light microscopy. RESULTS: At low magnification, it was possible to observe that bone trabeculae were present around the implant. Areas of bone remodeling and haversian systems were present near the implant surface. Under polarized-light microscopy, it was possible to observe that in the coronal aspect of the thread, the lamellar bone showed lamellae that tended to run parallel to the implant surface, while in the inferior aspect of the thread, the bone lamellae ran perpendicular to the implant surface. CONCLUSIONS: Histologic data pertaining to these 3 immediately loaded implants, and retrieved after a 4-month loading period, show that immediate loading did not produce untoward effects on peri-implant bone healing.

Adult↗

PubMed2006

Correlation between implant stability quotient and bone-implant contact: a retrospective histological and histomorphometrical study of seven titanium implants retrieved from humans.

BACKGROUND: Primary stability has a relevant role in the long-term success of dental implants. A quantitative method for the measurement of implant stability has been introduced (resonance frequency analysis [RFA]). Information about the significance of RFA measurements and about the relationship between RFA values and their association with implant osseointegration, success, or failure is important from a clinical point of view. PURPOSE: The aim of the present histological and histomorphometric study was to see if a correlation existed between the bone-implant contact (BIC) percentage of retrieved human implants and RFA values. MATERIALS AND METHODS: Seven implants inserted in the posterior mandible, with a sandblasted and acid-etched surface and retrieved after a 6-month period, were evaluated in the present study. These seven implants had been retrieved for different causes. All these implants were submerged and were retrieved with a 5-mm trephine bur and immersed in 10% buffered formalin to be processed for histology. RESULTS: A statistically significant correlation could be detected between implant stability quotient and BIC (p=.016). CONCLUSIONS: Even if the relationship between bone structure and RFA is still not fully understood, in our study, a statistically significant correlation was found between RFA and BIC values. Further studies are needed to evaluate a correlation of RFA and BIC in human implants retrieved after a range of healing periods.

Dental Implantation, Endosseous↗

PubMed2006

Screw vs cement-implant-retained restorations: an experimental study in the beagle. Part 2. Immunohistochemical evaluation of the peri-implant tissues.

Crestal bone loss has been reported to occur around dental implants. Even if the causes of this bone loss are not completely understood, the presence of a microgap between implant and abutment with a possible contamination of the internal portion of the implants has been suggested. The aim of this study was to see if there were differences in the vascular endothelial growth factor (VEGF) expression, microvessel density (MVD), proliferative activity (MIB-1), and inflammatory infiltrate in the soft tissues around implants with screwed and cemented abutments. Sandblasted and acid-etched implants were inserted in the mandibles of 6 Beagle dogs. Ten 3.5- x 10-mm root-form implants were inserted in each mandible. A total of 60 implants (30 with screwed abutments and 30 with cemented abutments) were used. After 12 months, all the bridges were removed and all abutments were checked for mobility. A total of 8 loosened screws (27%) were found in the screwed abutments, whereas no loosening was observed in cemented abutments. A gingival biopsy was performed in 8 implants with cemented abutments, in 8 implants with screwed abutments, and in 8 implants with unscrewed abutments. No statistically significant differences were found in the inflammatory infiltrate and in the MIB-1 among the different groups. No statistically significant difference was found in the MVD between screwed and cemented abutments (P = .2111), whereas there was a statistically significant difference in MVD between screwed and unscrewed abutments (P = .0277) and between cemented and unscrewed abutments (P = .0431). A low intensity of VEGF was prevalent in screwed and in cemented abutments, whereas a high intensity of VEGF was prevalent in unscrewed abutments. These facts could be explained by the effects induced, in the abutments that underwent a screw loosening, by the presence of bacteria inside the hollow portion of the implants or by enhanced reparative processes.

Acid Etching, Dental↗

PubMed2006

Immediately loaded blade implant retrieved from a after a 20-year loading period: a histologic and histomorphometric case report.

Immediate loading of root-form dental implants has shown promising results and offers treatment cost and convenience advantages to patients. Although blade implants have been immediately loaded for over 2 decades, the ability of this implant design to achieve osseointegration has been debated. The aim of the present study was to histologically evaluate the peri-implant tissues of an immediately loaded blade implant retrieved for abutment fracture after a 20-year loading period. Histologic samples were prepared and examined by light microscope. Compact, cortical, mature bone with well-formed osteons was present at the interface of the implant. Bone-to-implant contact was 51% +/- 6%. The histologic data showed that osseointegration was obtained in an immediately loaded blade implant inserted into the mandible, and that mineralized tissues were maintained at the interface over a long period (20 years).

Blade Implantation↗

PubMed2006

Maxillary sinus augmentation using an engineered porous hydroxyapatite: a clinical, histological, and transmission electron microscopy study in man.

Porous hydroxyapatite (HA) is a calcium-phosphate-based material that is biocompatible, nonimmunological, and osteoconductive, and has a macroporosity of about 200 to 800 microm. The pores seem to be able to induce migration, adhesion, and proliferation of osteoblasts inside the pore network and to promote angiogenesis inside the pore system. The aim of this study was to evaluate the clinical behavior and the histological and ultrastructural aspects of porous HA in maxillary sinus augmentation procedures. Twenty-four patients (19 men, 5 women; average age 53.4 years) in good general physical and mental health and with partially or completely edentulous maxillae were selected for this study. Six months after sinus floor elevation, at the time of dental implant placement, biopsies were carried out under local anesthesia. These bone cores were cut in half and were processed for light and transmission electron microscopy. After a mean 3 years after implantation, all implants are clinically in function and no surgical or prosthetic complications have occurred. Under light microscopy, newly formed bone was 38.5% +/- 4.5%, whereas the residual biomaterial represented 12% +/- 2.3% and the marrow spaces represented 44.6% +/- 4.2%. In addition, in the majority of cases, the biomaterial particles were in close contact with the bone, which appeared compact with the characteristic features of well-organized lamellar bone. A cement-like line was slightly visible at the bone-biomaterial interface, but there were no gaps or interposed connective tissue in between. A high quantity (about 40%) of newly formed bone was present. Bone was closely apposed to the biomaterials particles as shown in light microscopy and transmission electron microscopy. Moreover, no signs of inflammatory cell infiltrate or foreign body reaction were present. Also, most of the biomaterial was resorbed and only a small quantity (a little more than 10%) was still present. The results of our study show that porous HA can be a suitable synthetic material for bone regeneration in maxillary sinus augmentation procedures.

Absorbable Implants↗

PubMed2006

Histologic and ultrastructural analysis of regenerated bone in maxillary sinus augmentation using a porcine bone-derived biomaterial.

BACKGROUND: The purpose of the present study was the histologic and ultrastructural evaluation of a biomaterial composed of cortical pig bone in the form of granules. METHODS: After maxillary sinus augmentation using this biomaterial, 10 specimens were retrieved after 5 months in 10 patients using this biomaterial. The specimens were processed to be observed under light microscopy (LM) and transmission electron microscopy (TEM). Histomorphometric measurements were presented by means +/- standard deviations. RESULTS: LM showed that most of the particles were surrounded by newly formed bone. In some areas, the osteoid matrix was present; however, mainly compact bone was present at the interface. There was no evidence of an acute inflammatory infiltrate. The newly formed bone was 36% +/- 2.8% and marrow spaces were 38% +/- 1.6%, whereas residual grafted material was 31% +/- 1.6%. Under TEM, all phases of bone formation (osteoid matrix, woven, and lamellar bone) were observed in proximity with the biomaterial particles. The bone-biomaterial interface showed a close contact between the porcine bone particles and the surrounding bone that had mainly features of mature bone with numerous osteocytes. A lamina limitans was sometimes present at this interface. CONCLUSIONS: According to our knowledge, this is the first study presenting data on TEM of a porcine bone-derived biomaterial used in sinus augmentation procedures in humans. Our findings show that this is a biocompatible biomaterial that can be used for maxillary sinus augmentation procedures without interfering with the normal reparative bone processes.

Absorbable Implants↗

PubMed2006

Inflammatory infiltrate, microvessel density, nitric oxide synthase expression, vascular endothelial growth factor expression, and proliferative activity in peri-implant soft tissues around titanium and zirconium oxide healing caps.

BACKGROUND: The aim of the present study in humans was to conduct a comparative immunohistochemical evaluation of vascular endothelial growth factor (VEGF) and nitric oxide synthase (NOS) expression, inflammatory infiltrate, proliferative activity expression, and microvessel density (MVD) in peri-implant soft tissues of titanium and zirconium oxide healing caps. METHODS: Five patients, three men and two women (aged 30 to 66 years; mean: 49 years), participated in this study. All patients received dental implants that were 3.8 mm in diameter and 11 mm in length. All implants were left to heal in a non-submerged (single-stage) mode. Healing caps (3.8 mm in diameter and 3.0 mm in height) were inserted in all implants. Half of the implants were supplied with standard, prefabricated caps of commercially pure titanium, whereas the other half were provided with test zirconium oxide caps. After a 6-month healing period, a gingival biopsy was performed with a circular scalpel (5.5 mm in diameter) around the healing caps of both groups, without unscrewing or removing the healing caps. The dimensions of the gingival biopsies were 1.7 mm (5.5-3.8 mm) in thickness and 3 mm in height. RESULTS: Statistically significant differences were found in the microvessel density between titanium and zirconium oxide healing caps and group II (P < or = 0.0001). Statistically significant differences were likewise found in the low and high intensities of NOS1, NOS3, and VEGF (P < or = 0.0001). In conclusion, the high intensity of NOS1, NOS3, and VEGF were mostly expressed in the titanium group, whereas the low intensity of NOS1, NOS3, and VEGF were mostly expressed in the zirconium oxide group. CONCLUSIONS: In our specimens, the inflammatory infiltrate was mostly present in the titanium specimens. Their extension was much larger than that of the zirconium oxide specimens. Higher values of MVD were observed in the titanium specimens (29.1 versus 15.8). In addition, a higher expression of VEGF intensity was observed in the peri-implant tissues of titanium healing caps, whereas predominantly lower expressions of VEGF intensity were noted around the zirconium oxide healing caps. The Ki-67 expression was higher in the titanium specimens. All these data revealed that the tissues around titanium healing caps underwent a higher rate of inflammation-associated processes, most probably correlated to the higher inflammation processes observed in these tissues. A higher intensity expression of NOS1 and NOS3 was recorded in the tissues around titanium, whereas, on the contrary, a lower intensity of expression was found in the tissues around zirconium oxide specimens. These latter data indicate that the higher expression of these two mediators could be correlated to the higher amount of bacteria present around the titanium samples.

Adult↗

PubMed2005

Ultrastructure of bone healing in defects grafted with a copolymer of polylactic/polyglycolic acids.

Bone substitutes have been used for the treatment of bone defects. The objective of this study was to ultrastructurally evaluate the healing pattern of bone defects filled with a copolymer of polylactic/polyglycolic acid (FisiograftR) at a time point in which it is expected to be only partially degraded, with the purpose to ultrastructurally analyze how the bone is forming around the grafting material. Three 5-mm-diameter bone defects were created in each tibia from 5 rabbits (average weight 2.5 kg) in which the material was randomly implanted. Animals were sacrificed 30 days after surgery and the 30 bone defects were fixed in 2% glutaraldehyde-2.5% formaldehyde, under microwave irradiation, decalcified in EDTA, embedded in Spurr resin, and examined in a Jeol 1010 TEM. All the bone defects were filled with connective tissue, interspersed with different amounts of the filling material and newly formed bone trabeculae. In areas where the degrading copolymer was present in small amounts, newly formed bone matrix was detected; it was deposited by osteoblast-like cells in close relation to the copolymer. In areas where the degrading copolymer formed accumulates, an amorphous multilayered material was identified between the connective tissue and the copolymer. In summary, the copolymer of PLA/PGA studied appears to be an osteoconductive material when it is used to fill bone defects.

Animals↗

PubMed2005

Maxillary sinus augmentation with Bio-Oss particles: a light, scanning, and transmission electron microscopy study in man.

Biological interactions occurring at the bone-biomaterial interface are critical for long-term clinical success. Bio-Oss is a deproteinized, sterilized bovine bone that has been extensively used in bone regeneration procedures. The aim of the present study was a comparative light, scanning, and electron microscopy evaluation of the interface between Bio-Oss and bone in specimens retrieved after sinus augmentation procedures. Under light microscopy, most of the particles were surrounded by newly formed bone, while in a few cases, at the interface of some particles it was possible to observe marrow spaces and biological fluids. Under scanning electron microscopy, in most cases, the particle perimeter appeared lined by bone that was tightly adherent to the biomaterial surface. Transmission electron microscopy showed that the bone tissue around the biomaterial showed all the phases of the bone healing process. In some areas, randomly organized collagen fibers were present, while in other areas, newly formed compact bone was present. In the first bone lamella collagen fibers contacting the Bio-Oss surface were oriented at 243.73 +/- 7.12 degrees (mean +/- SD), while in the rest of the lamella they were oriented at 288.05 +/- 4.86 degrees (mean +/- SD) with a statistically significant difference of 44.32 degrees (p < 0.001). In the same areas the intensity of gray value was 172.56 +/- 18.15 (mean +/- SD) near the biomaterial surface and 158.71 +/- 21.95 (mean +/- SD) in the other part of the lamella with an unstatistically significant difference of 13.79 (p = 0.071). At the bone-biomaterial interface there was also an electron-dense layer similar to cement lines. This layer had a variable morphology being, in some areas, a thin line, and in other areas, a thick irregular band. The analyses showed that Bio-Oss particles do not interfere with the normal osseous healing process after sinus lift procedures and promote new bone formation. In conclusion, this study serves as a better understanding of the morphologic characteristics of Bio-Oss and its interaction with the surrounding tissues.

Absorbable Implants↗

PubMed2005

Maxillary sinus augmentation using a synthetic cell-binding peptide: a histologic and transmission electron microscopy case study in man.

PepGen P-15 is a combination natural anorganic bovine-derived hydroxyapatite matrix coupled with a synthetic cell-binding peptide (P-15). This material has improved bone formation in periodontal osseous defects and bone regenerative procedures. There were 3 specimens retrieved 18 months after a sinus lifting procedure using PepGen P-15. These specimens were treated to be observed under light microscopy and transmission electron microscopy. Light microscopy showed that most of the particles were surrounded by newly formed bone. In some areas, osteoid matrix was present. No acute inflammatory infiltrate was present. In transmission electron microscopy, all phases of bone formation (i.e., osteoid matrix, woven bone, and lamellar bone) were observed in the newly formed bone around the biomaterial particles. In some regions, this newly formed bone seemed to present interdigitations connecting to or entering into the particle surface. To our knowledge, this is the first report presenting data on transmission electron microscopy of PepGen P-15 used in a sinus augmentation procedure in man. Our results confirm previous reports on the clinical effectiveness of this material.

Alveolar Ridge Augmentation↗

PubMed2005

Bone remodeling in immediately loaded and unloaded titanium dental implants: a histologic and histomorphometric study in humans.

Remodeling is thought to prevent microdamage accumulation caused by repetitive loading and to increase the fatigue life of bone. The bone remodeling rate (BRR) is the period of time needed for new bone to replace the existing bone and to allow for the adaptation of bone to its environment. BRR is expressed as a percentage or volume of new bone within a specific time period. The aim of the present study was to evaluate bone remodeling events on submerged and immediately loaded dental implants. Twelve patients with edentulous mandibles participated in this study. All patients were rehabilitated with fixed mandibular prostheses, with 10 dental implants per patient. An additional implant was inserted in the most distal posterior mandibular jaw region. In 6 patients, these additional implants were loaded with a fixed provisional prosthesis the same day of the implant surgery and loaded. In the other 6 patients, the additional implants were left submerged and not loaded. After 6 months, all the additional implants were retrieved with a trephine. The percentage of woven and lamellar bone, number of osteoclasts and osteoblasts, and percentage of bone labeled by tetracycline at 0.5 mm and 2 mm from the implant surface were evaluated. The percentage of lamellar bone, number of osteoblasts, and percentage of bone tetracycline labeling was significantly higher in the loaded implants than in the unloaded implants (P =.0001). Also in the loaded implants, the percentage of woven and lamellar bone, number of osteoclasts and osteoblasts, and percentage of bone tetracycline labeling was significantly higher at 0.5 mm than at 2 mm from the implant surface (P =.0001). No such differences were found in unloaded implants (P =.377). In conclusion, we found that (1) loading appeared to stimulate bone remodeling at the interface, (2) a higher percentage of lamellar bone was found in loaded implants, (3) the percentage of bone labeling was higher at the interface of loaded implants, (4) no differences were found in the BRRs between immediately loaded and unloaded implants, and (5) immediate loading had not interfered on the lamellar bone formation at the interface and had not produced formation of woven bone at the interface.

Adult↗

PubMed2005

Bone response to submerged, unloaded implants inserted in poor bone sites: a histological and histomorphometrical study of 8 titanium implants retrieved from man.

An important parameter that influences the long-term success of oral implants is the bone quality of the implant bed. Posterior areas of the jaws have been avoided in implant dentistry because of their poor bone quality, higher chewing forces, and presumed higher implant failure rates. Several researchers have deemed soft bone implant sites to be a great potential risk situation, and most failures have been found in sites where the bone density was already low. The inferior success rates in the posterior maxilla have been attributed to a lower bone density and a lesser bone-implant interface. The aim of the present study was a histological and histomorphometrical analysis of the bone response to submerged implants inserted in posterior areas of the human jaws and retrieved, for different causes, after healing periods varying from 6 weeks to 12 months. Eight submerged implants that had been retrieved for different causes after different healing periods were evaluated in the present study. All implants were submerged and unloaded. Three implants had been removed for inadequate patient adaptation, 2 for inability of the implant to meet changed prosthetic needs, 1 for not optimal position from esthetic and hygiene aspects, and the last 2 for pain and dysesthesia. All the implants were retrieved with a 5-mm trephine bur. Newly formed peri-implant bone was found in all implants even after shorter healing periods. The bone-implant contact percentage varied from 30% to 96%. In conclusion, some surfaces have an improved characteristic of contact osteogenesis in soft bone, with coverage of the implant surface with a bone layer as a base for intensive bone formation and remodeling. We documented osseointegration of implants with a rough surface even after an insertion period of less than 2 months, both in the mandible and in the maxilla. From these results, we tentatively extrapolate that these implants might be carefully loaded after 2 months of healing, even when inserted in soft bone. A higher removal torque value might lead to a more predictable use of shorter implants, to a support of a prosthesis with fewer implants, or to shorter healing periods.

Alveolar Bone Loss↗

PubMed2005

Screw- vs cement-implant-retained restorations: an experimental study in the Beagle. Part 1. Screw and abutment loosening.

The causes of implant failures can be biological or mechanical. The mechanical causes include fracture of the implant, fracture of the abutment, and loosening of the abutment. Numerous studies show that abutment loosening constitutes one of the marked implant postsurgery complications requiring clinical intervention. The aim of the present study was to evaluate the incidence of the screw loosening in screwed or cemented abutments. Six adult male Beagles were used. In each dog, the first molars and 2 premolars were extracted. The sutures were removed after 7 days. After 3 months, 10 implants were placed in each dog, 5 in the right mandible and 5 in the left mandible. The abutments either were screwed in (n=30) by applying a total strength of 30 N/cm or were cemented (n=30). After 12 months, 8 (27%) loosened screws were present in screwed abutments, whereas no abutment loosening was observed in cemented abutments (P = .0001). Screwed abutments are often submitted to nonaxial loads that determine screw and abutment loosening.

Animals↗

PubMed2005

Histologic analysis of an immediately loaded implant retrieved after 2 months.

Human biopsy of immediately loaded implants is the most important way to determine the occurrence of osseointegration. Implants inserted in sites with poor bone quality have been associated with lower success rates. The aim of this study is to document the early healing processes in a man around an immediately loaded implant retrieved after a 2-month loading period. An implant was inserted in the mandible of a 32-year-old patient and was loaded into a nonfunctional loading mode with a fixed provisional prosthesis the same day of the implant surgery. After 2 months, because the patient had difficulty accepting the implant, the implant was retrieved with a 5-mm trephine drill. Before retrieval, the implant appeared to be clinically osseointegrated, and no mobility was present. The preexisting bone quality was type D4. The implant was surrounded by newly formed bone lamellae with a width of 200 to 400 microm. In many areas it was possible to observe osteoblasts producing osteoid matrix directly on the implant surface. Bone-to-implant contact percentage was 71% +/- 3.2%. Even in a poor bone site and after a healing period of only 2 months, we observed a high bone-to-implant contact percentage. We can confirm that immediately loaded implants placed in soft spongy bone after a 2-month healing period can present mineralized tissue at the interface.

Adult↗

PubMed2005

A 16-year study of the microgap between 272 human titanium implants and their abutments.

A microgap has been described at the level of the implant-abutment connection. This microgap can be colonized by bacteria, and this fact could have relevance on the remodeling of the peri-implant crestal bone and on the long-term health of the peri-implant tissues. The authors report on 272 implants with screw- or cement-retained abutments retrieved from humans for different causes during a 16-year period. In the implants with screw-retained abutments, a 60-microm microgap was present at the level of implant-abutment connection. In some areas the titanium had sheared off from the surface and from the internal threads. The contact between the threads of the implant and those of the abutment was limited to a few areas. Bacteria were often present in the microgaps between implant and abutment and in the internal portion of the implants. In implants with cement-retained abutments, a 40-microm microgap was found at the level of the implant-abutment connection. No mechanical damage was observed at the level of the implant or of the abutment. All the internal voids were always completely filled by the cement. No bacteria were observed in the internal portion of the implants or at the level of the microgap. The differences in the size of the microgap between the two groups were statistically significant (P < .05). In conclusion, in screw-retained abutments the microgap can be a critical factor for colonization of bacteria, whereas in cement-retained abutments all the internal spaces were filled by cement. In these retrieved implants, the size of the microgap was markedly variable and much larger than that observed in vitro.

Bacteria↗

PubMed2005

Histologic and histomorphometric analysis of an immediately loaded implant retrieved from man after 14 months of loading.

OBJECTIVE: The aim of this study was a histologic and histomorphometric analysis of the peri-implant tissue reactions and the bone/titanium interface in an immediately loaded titanium implant inserted in a soft bone site and retrieved, in man, after a 14-month loading period. METHODS. A 65-year-old patient presented with a partial edentulism in the left posterior mandible. The patient was rehabilitated with three dental implants inserted in the left first, second, and third molar sites. All these implants were immediately put into a nonfunctional loading mode and joined with the other implants that supported the temporary restorations. After 14 months, the most distal implant and surrounding tissues were retrieved because of psychological problems of the patient. RESULTS: Newly formed, strongly stained, compact, mature cortical bone with few marrow spaces was observed around the implant, especially in the coronal portion. No inflammatory infiltrate was present around the implant. No gaps or dense fibrous connective tissue were found at the bone/metal interface. No apical epithelial migration was found. In the cortical portion, bone remodeling areas were present with many newly formed Haversian canals. Only in a few areas of the interface was it possible to observe an osteoblast rim. In the apical portion, newly formed bone trabeculae were present; these were composed mostly by woven bone, and only a small quantity of preexisting lamellar bone was present. Histomorphometric evaluation showed that the bone/implant contact percentage was 72.6% (+/-2.7%). CONCLUSIONS: We found that, in immediately loaded implants inserted in soft tissue sites, it was possible to find a high percentage of bone-to-implant contact and that osseointegration was maintained for more than 1 year. This fact could be partly explained with the use of an implant with a rough surface.

Aged↗