PubMed Health⌕ Search

Biomedical subjects

Antonio Sgamellotti

Publications and source records attributed to Antonio Sgamellotti.

13 recordsLinked to original sources
PubMed2006

Electronic transitions involved in the absorption spectrum and dual luminescence of tetranuclear cubane [Cu4I4(pyridine)4] cluster: a density functional theory/time-dependent density functional theory investigation.

We present a combined density functional theory (DFT)/time-dependent density functional theory (TDDFT) study of the geometry, electronic structure, and absorption and emission properties of the tetranuclear "cubane" Cu4I4py4 (py = pyridine) system. The geometry of the singlet ground state and of the two lowest triplet states of the title complex were optimized, followed by TDDFT excited-state calculations. This procedure allowed us to characterize the nature of the excited states involved in the absorption spectrum and those responsible for the dual emission bands observed for this complex. In agreement with earlier experimental proposals, we find that while in absorption the halide-to-pyridine charge-transfer excited state (XLCT*) has a lower energy than the cluster-centered excited state (CC*), a strong geometrical relaxation on the triplet cluster-centered state surface leads to a reverse order of the excited states in emission.

Journal Article↗
PubMed2006

Nonradical mechanisms for the uncatalyzed thermal functionalization of silicon surfaces by alkenes and alkynes: a density functional study.

We propose a new concerted mechanism for the uncatalyzed hydrosilylation of terminal alkenes and alkynes, alternative to the conventional radical-based mechanism. Density functional calculations have been carried out on these and on previously proposed alternative mechanisms for the hydrosilylation of ethylene and acetylene by suitable finite size clusters as models of the thermal functionalization of -SiH3, =SiH2, and [triple bound] SiH groups in flat Si(100) and Si(111) and porous silicon surfaces by alkenes and alkynes. For each step involved in the considered hydrosilylation pathways, we optimized the geometries of reactants and products and located the corresponding transition states. The calculated activation energies for the concerted pathways of ethylene and acetylene are, respectively, 57.6 and 60.9 kcal mol(-1) on -SiH3 and in the ranges 62-63 and 58-61 kcal mol-1 on =SiH2 and 64-66 and 56-61 kcal mol(-1) on SiH. These values are much lower than the activation energies calculated for the corresponding homolytic dissociation of the Si-H bond, which is the preliminary step in the radical path, 85.6, 82-83, and 79-81 kcal mol(-1), respectively, for -SiH3, =SiH2, and [triple bound] SiH groups. Our results thus suggest that the thermal hydrosilylation of alkenes and alkynes on silicon surfaces, for which a radical-based mechanism is currently accepted, may occur through a concerted mechanism.

Acetylene↗
PubMed2006

Functionalization of carbon nanotubes with Vaska's complex: a theoretical approach.

The functionalization of single-walled carbon nanotubes (CNTs) with Vaska's complex trans-Ir(CO)Br(PPh(3))(2) has been investigated by means of hybrid quantum mechanics/molecular mechanics (QM/MM) calculations. The formation of a stable adduct has been experimentally evidenced by Wong et al. (Nano Lett. 2002, 2, 49), but microscopical details on the metal-nanotube interaction are still unclear. Our calculations show a low propensity to eta(2) coordination of Vaska's complex with the perfect hexagonal network of CNTs. Rather, a stronger interaction takes place when the transition metal center coordinates to carbon atoms belonging to pentagonal rings, as in topological defects or end-caps.

Journal Article↗
PubMed2006

Selective functionalization of the Si(100) surface by a bifunctional alkynylamine molecule: density functional study of the switching adsorption linkage. 2.

The reaction of the bifunctional organic molecule 1-(dimethylamino)-2-propyne (DMAP) on the Si(100) surface has been investigated by density functional calculations employing a two-dimer cluster model. We found that, once in the physisorbed dative bonded well (-20.0 kcal mol(-1)), DMAP can proceed via a number of pathways, involving the formation of Si-C sigma bonds, which lead to thermodynamically more stable configurations. We first considered the cycloaddition of the CC triple bond, leading to a Si-C di-sigma bonded product (-58.7 kcal mol(-1)), for which we computed an energy barrier of only 12.5 kcal mol(-1), consistently with the observed switching of DMAP adsorption linkage at 300 K. We also explored the dissociative pathway involving the methylene C-H bond cleavage on the dative bonded DMAP, leading to three adsorption products with one (-57.3 kcal mol(-1)) and three Si-C sigma bonds (-58.7 and -60.6 kcal mol(-1)). The energy barrier for this pathway is computed 24.7 kcal mol(-1) and may therefore compete at temperature above 300 K with the reaction pathway involving the addition of the alkyne unit.

Adsorption↗
PubMed2006

The electronic structure of alkali aurides. A four-component Dirac-Kohn-Sham study.

Spectroscopic constants, including dissociation energies, harmonic and anharmonic vibrational frequencies, and dipole moments, are calculated for the complete alkali auride series (LiAu, NaAu, KAu, RbAu, CsAu). The four-component formulation of relativistic density functional theory has been employed in this study, using the G-spinor basis sets implemented recently in the program BERTHA. The performance of four standard nonrelativistic density functionals employed is investigated by comparing the results with the best available theoretical and experimental data. The present work provides the first theoretical predictions on the molecular properties of RbAu. The intermetallic bond that occurs in the alkali auride series is highly polar and is characterized by a large charge transfer from the alkali metals to gold. The extent of this electron transfer has been investigated using several different charge analysis methods, enabling us to reach some general conclusions on their relative performance. We further report a detailed analysis of the topological properties of relativistic electron density in the bonding region, discussing the features of this approach which characterize the nature of the chemical bond. We have also computed the fully relativistic density for the alkali halides MBr and MI (M = Li, Na, K, Rb, and Cs). The comparative study shows that, on the basis of several topological properties and the variation in bond lengths, the gold atom behaves similarly to a halogen intermediate between Br and I.

Journal Article↗
PubMed2006

Electron density fitting for the Coulomb problem in relativistic density-functional theory.

A density fitting approach for the Coulomb matrix representation within the four-component formulation of relativistic density-functional theory is presented. Our implementation, which uses G-spinor basis sets, shares all the advantages of those found in nonrelativistic quantum chemistry. We show that very accurate Coulomb energies may be obtained using a modest number of scalar auxiliary basis functions for molecules containing heavy atoms. The efficiency of this new implementation is demonstrated in a detailed study of the spectroscopic properties of the gold dimer, and its scaling behavior has been tested by calculations of some closed-shell gold clusters (Au2, Au3+, Au4, Au5+). The algorithm is found to scale as O(N3), just as it does in the nonrelativistic case, and represents a dramatic improvement in efficiency over the conventional approach in the calculation of the Coulomb matrix, with computation times that are reduced to less than 3% for Au2 and up to 1% in the case of Au5+.

Journal Article↗
PubMed2005

Electron paramagnetic resonance, scanning electron microscopy with energy dispersion X-ray spectrometry, X-ray powder diffraction, and NMR characterization of iron-rich fired clays.

The aim of this study is to clarify the structure of an iron-rich clay and the structural changes involved in the firing process as a preliminary step to get information on ancient ceramic technology. To this purpose, illite-rich clay samples fired at different temperatures were characterized using a multitechnique approach, i.e., by electron paramagnetic resonance, scanning electron microscopy with electron dispersion X-ray spectrometry, X-ray powder diffraction, magic angle spinning and multiple quantum magic angle spinning NMR. During firing, four main reaction processes occur: dehydration, dehydroxylation, structural breakdown, and recrystallization. When the results are combined from all characterization methods, the following conclusions could be obtained. Interlayer H2O is located close to aluminum in octahedral sites and is driven off at temperatures lower than 600 degrees C. Between 600 and 700 degrees C dehydroxylation occurs whereas, between 800 and 900 degrees C, the aluminum in octahedral sites disappears, due to the breakdown of the illite structure, and all iron present is oxidized to Fe3+. In samples fired at 1000 and 1100 degrees C iron clustering was observed as well as large single crystals of iron with the occurrence of ferro- or ferrimagnetic effects. Below 900 degrees C the aluminum in octahedral sites presents a continuous distribution of chemical shift, suggesting the presence of slightly distorted sites. Finally, over the whole temperature range, the presence of at least two tetrahedral aluminum sites was revealed, characterized by different values of the quadrupolar coupling constant.

Aluminum Silicates↗
PubMed2005

Vacancy-induced chemisorption of NO2 on carbon nanotubes: a combined theoretical and experimental study.

The role of structural defects on the adsorption of NO2 on carbon nanotubes (CNTs) is analyzed here by means of both statical density functional theory calculations and Car-Parrinello molecular dynamics and further confirmed by X-ray photoelectron spectroscopy measurements. The interaction of a NO2 molecule with an active site produced by a single vacancy on the sidewall follows two possible reaction routes, leading to the formation of a C-N bond or to dissociation of NO2. Accounting for defective adsorption sites allows a better understanding of microscopic mechanisms involved in technological applications of CNTs, e.g., gas-sensing devices.

Journal Article↗
PubMed2005

Computational strategies for a four-component Dirac-Kohn-Sham program: implementation and first applications.

An implementation of the generalized gradient approximation within the four-component formulation of relativistic density-functional theory using G-spinor basis sets is presented. This approach is based on the direct evaluation of the relativistic density and its gradient from the G-spinor amplitudes and gradients without explicit reference to the total density matrix. This proves to be a particularly efficient scheme, with an intrinsic computational cost that scales linearly with the number of G-spinor basis functions. In order to validate this new implementation, incorporated in the parallel version of the program BERTHA, a detailed study of the diatomic system CsAu is also reported. The spectroscopic constants D(e),r(e),omega(e), and x(e)omega(e) and the dipole moment mu have been calculated and compared with the best available theoretical and experimental data. The sensitivity of our results to the details of the numerical schemes used to evaluate the matrix elements is analyzed in detail. Also presented is a comparative study of molecular properties in the alkali auride series which have been obtained using several standard non-relativistic density functionals.

Journal Article↗
PubMed2004

Acetylene to vinylidene rearrangements on electron rich d6 metal centers: a density functional study.

The acetylene to vinylidene isomerization on several Ru(II) d(6) metal fragments with different electron richness of the metal center has been investigated by means of density functional theory calculations. We considered the [(eta(5)-C(5)Me(5))Ru(dippe)](+), [(eta(5)-C(5)Me(5))Ru(dmpe)](+), [(eta(5)-C(5)H(5))Ru(PMe(3))(2)](+), [(eta(6)-C(6)Me(6))(PMe(3))ClRu](+), [(eta(5)-C(5)H(5))Ru(CO)(PPh(3))](+) and [eta(6)-C(6)H(6))(PMe(3))ClRu](+), species which are quite common in the chemistry of cationic Ru(II) complexes and span a wide range of electron-richness. For each of the considered fragments, the minima on the potential energy surfaces for the two possible isomerization mechanisms, i.e. through a direct 1,2-hydrogen shift or through a hydrido-alkynyl intermediate, have been localized. A linear correlation has been found between the C=C stretching frequencies of the vinylidene complexes, as an estimate of the electron richness, and the stability of the corresponding hydrido-alkynyl intermediates. For the most electron-rich among the considered fragments, [(Cp*)(dippe)Ru(HCCH)](+), the hydrido-alkynyl species has been found essentially isoenergetic with the alkyne complex (only 1.9 kcal mol(-1) higher), in agreement with the experimental evidence showing for this system an equilibrium between these two species. For the same [(Cp*)(dippe)Ru](+) fragment, a detailed analysis of the reaction profiles for the two possible acetylene rearrangement pathways has been performed. Our results show that once the eta(2)-C-H coordinated acetylene intermediate is accessed, the system can easily evolve towards a hydrido-alkynyl intermediate, this process being kinetically favored with respect to the direct 1,2-shift leading to the vinylidene product.

Journal Article↗
PubMed1998

Isotope Exchange in Ionized O(3)/O(2) Mixtures: The Role of O(5)(+), a Unique O(n)()(+) Complex.

A hitherto unknown reaction, the isotope exchange between oxygen and ozone, accompanies formation of the latter upon ionization of O(2) or air, a long-known process widely utilized for the production of ozone and of great relevance to atmospheric chemistry. The isotope exchange was demonstrated and its mechanism established by mass spectrometric techniques that allowed identification of the charged intermediate, the O(5)(+) ion, characterized by the joint application of theoretical and experimental methods as truly unique among all known O(n)()(+) complexes. The results are of interest to atmospheric chemistry, bearing on the problem related to the widely different extent of (18)O enrichment of ozone in the stratosphere and in the troposphere.

Journal Article↗
PubMed1997

Oligomerization of the PH(3)CuC&tbd1;CCuPH(3) Acetylide toward the Formation of (PH(3)CuC)(n)() (n = 4, 6, 8) Metal Carbides: A Theoretical Study Based on Density Functional Theory.

Density functional calculations were performed on a series of Cu(PH(3))-substituted cyclopolyenes as simple models of molecular metal carbides. We studied the oligomerization of the copper acetylide PH(3)CuC&tbd1;CCuPH(3) as a possible precursor of these (PH(3)CuC)(n)() (n = 4, 6, 8) hypothetical species. Special emphasis was placed on the comparison of the main properties of these metal-substituted cyclopolyenes with those of the corresponding cyclopolyenes in an attempt to study the effects of metal substituents on the organic C(4), C(6), and C(8) cyclic moieties. We found comparable geometries of the C(n)() units and, for n = 3, a thermodynamically stable species with respect to dissociation toward dinuclear copper acetylides.

Journal Article↗