PubMed Health⌕ Search

Biomedical subjects

Anyuan Cao

Publications and source records attributed to Anyuan Cao.

8 recordsLinked to original sources
PubMed2006

Multifunctional composites using reinforced laminae with carbon-nanotube forests.

Traditional fibre-reinforced composite materials with excellent in-plane properties fare poorly when out-of-plane through-thickness properties are important. Composite architectures with fibres designed orthogonal to the two-dimensional (2D) layout in traditional composites could alleviate this weakness in the transverse direction, but all of the efforts so far have only produced limited success. Here, we unveil an approach to the 3D composite challenge, without altering the 2D stack design, on the basis of the concept of interlaminar carbon-nanotube forests that would provide enhanced multifunctional properties along the thickness direction. The carbon-nanotube forests allow the fastening of adjacent plies in the 3D composite. We grow multiwalled carbon nanotubes on the surface of micro-fibre fabric cloth layouts, normal to the fibre lengths, resulting in a 3D effect between plies under loading. These nanotube-coated fabric cloths serve as building blocks for the multilayered 3D composites, with the nanotube forests providing much-needed interlaminar strength and toughness under various loading conditions. For the fabricated 3D composites with nanotube forests, we demonstrate remarkable improvements in the interlaminar fracture toughness, hardness, delamination resistance, in-plane mechanical properties, damping, thermoelastic behaviour, and thermal and electrical conductivities making these structures truly multifunctional.

Journal Article↗
PubMed2005

Super-compressible foamlike carbon nanotube films.

We report that freestanding films of vertically aligned carbon nanotubes exhibit super-compressible foamlike behavior. Under compression, the nanotubes collectively form zigzag buckles that can fully unfold to their original length upon load release. Compared with conventional low-density flexible foams, the nanotube films show much higher compressive strength, recovery rate, and sag factor, and the open-cell nature of the nanotube arrays gives excellent breathability. The nanotube films present a class of open-cell foam structures, consisting of well-arranged one-dimensional units (nanotube struts). The lightweight, highly resilient nanotube films may be useful as compliant and energy-absorbing coatings.

Journal Article↗
PubMed2005

Multifunctional brushes made from carbon nanotubes.

Brushes are common tools for use in industry and our daily life, performing a variety of tasks such as cleaning, scraping, applying and electrical contacts. Typical materials for constructing brush bristles include animal hairs, synthetic polymer fibres and metal wires (see, for example, ref. 1). The performance of these bristles has been limited by the oxidation and degradation of metal wires, poor strength of natural hairs, and low thermal stability of synthetic fibres. Carbon nanotubes, having a typical one-dimensional nanostructure, have excellent mechanical properties, such as high modulus and strength, high elasticity and resilience, thermal conductivity and large surface area (50-200 m2 g(-1)). Here we construct multifunctional, conductive brushes with carbon nanotube bristles grafted on fibre handles, and demonstrate their several unique tasks such as cleaning of nanoparticles from narrow spaces, coating of the inside of holes, selective chemical adsorption, and as movable electromechanical brush contacts and switches. The nanotube bristles can also be chemically functionalized for selective removal of heavy metal ions.

Crystallization↗
PubMed2005

Controlled fabrication of hierarchically branched nanopores, nanotubes, and nanowires.

Here, we report a generic synthetic approach to rationally design multiply connected and hierarchically branched nanopores inside anodic aluminum oxide templates. By using these nanochannels, we controllably fabricate a large variety of branched nanostructures, far more complex than what exists today. These nanostructures include carbon nanotubes and metallic nanowires having several hierarchical levels of multiple branching. The number and frequency of branching, dimensions, and the overall architecture are controlled precisely through pore design and templated assembly. The technique provides a powerful approach to produce nanostructures of greater morphological complexity, which could have far-reaching implications in the design of future nanoscale systems.

Journal Article↗
PubMed2005

Bottom-up growth of carbon nanotube multilayers: unprecedented growth.

An unusual growth phenomenon, with no precedent in vapor-phase thin film growth, is described here, for the case of the growth of stacked multiple layers of vertically aligned carbon nanotubes(1-6) on solid substrates. As multiple layers of ordered nanotubes are sequentially deposited from the vapor onto the substrate, each layer nucleates and grows from the original substrate surface at the bottom of the existing multiple stacks of nanotubes. In contrast to conventional understanding of thin film deposition,(7) the mechanism here has similarities to porous oxide film formation on surfaces.(8) The stacked layers of aligned nanotubes act as fully permeable membranes for the downward diffusion of growth precursor vapors, allowing growth to occur at the buried solid interface. The preexisting multiple nanotube stacks lift up to accommodate the vertical growth of fresh layers, allowing the formation of nanotube towers extending in millimeter lengths. Our results provide evidence for a new growth phenomenon, characterized by selective, interface-driven, bottom-up growth of self-assembled nanowires at buried interfaces, covered with weakly adhering thick porous membranes.

Journal Article↗
PubMed2005

Flow-induced planar assembly of parallel carbon nanotubes and crossed nanotube junctions.

We report the in-situ assembly of carbon nanotubes by chemical vapor deposition of hydrocarbon precursor (a solution of ferrocene dissolved in isopropyl alcohol). We utilized the vapor stream inside the reaction chamber to comb carbon nanotubes along the same direction and obtained two-dimensional (planar) assembly of nanotubes with tunable distributions. When the carbon source was flowing at a relatively higher rate of approximately 0.2 ml/min, most of nanotubes were driven along the vapor flow direction during their growth process and formed a thin freestanding mat featured with a parallel arrangement, whereas a lower flowing rate (approximately 0.05 ml/min) only resulted in random spider-web structures consisting of crossed nanotube junctions with a variety of configurations (e.g., "+", "Y", "T" shapes and twists). The measured direction-dependent electrical resistance of these two assemblies was in agreement with respective structures, which was anisotropic for parallel nanotubes and nearly isotropic for random networks. Such large-area planar carbon nanotube arrays with controlled orientation and various junction configurations will facilitate the design and fabrication of electronic and mechanical devices.

Carbon↗
PubMed2004

Carbon nanotubes grafted on silicon oxide nanowires.

In this article, we report the grafting of multi-walled carbon nanotubes on silica nanowires by directly growing nanotubes on the surfaces of the nanowires via chemical vapor deposition (CVD) using ferrocene and xylene as Fe catalyst precursor and carbon source, respectively. The grafted carbon nanotubes are a few micrometers long with diameters of 10 to approximately 30 nm, and grow uniformly along the lengths of the nanowires. The distribution density of the grafted carbon nanotubes on the silica nanowires can be tuned by simply adjusting the CVD growth temperature. Our method provides a simple approach for synthesizing nanometer scale grafted heterostructures between nanotubes and nanowires, which could be used to design and construct high-performance filters, chemical sensors and reinforced composites.

Carbon↗