Biomedical subjects

Aquiles A Barros

Publications and source records attributed to Aquiles A Barros.

5 recordsLinked to original sources

PubMed2006

Analysis of xanthohumol and isoxanthohumol in different hop products by liquid chromatography-diode array detection-electrospray ionization tandem mass spectrometry.

An analytical methodology based on the sample extraction with methanol/formic acid by ultra-sonication and subsequent analysis by high-performance liquid chromatography with diode array detection is proposed for the determination of xanthohumol (XN) and isoxanthohumol (IXN) in different hop products. The identity of the compounds was confirmed by high-performance liquid chromatography/electrospray ionization tandem mass spectrometry in positive ion mode. The performance of the method was assessed by the evaluation of parameters such as absolute recovery, repeatability, linearity and limits of detection and quantitation. This methodology was applied to investigate the impact of the extraction process of the hop products on the amount of xanthohumol and isoxanthohumol. The ethanolic extract revealed to be the hop product richest in xanthohumol (3.75+/-0.05 g/100 g) relatively to the pellets (0.62+/-0.01 g/100 g) and supercritical CO2 extract (0.089+/-0.001 g/100 g).

Chromatography, High Pressure Liquid↗

PubMed2006

Electroanalytical determination of paroxetine in pharmaceuticals.

Electroanalytical methods based on square-wave adsorptive-stripping voltammetry (SWAdSV) and flow-injection analysis with SWAdSV detection (FIA-SWAdSV) were developed for the determination of paroxetine (PRX). The methods were based on the reduction of PRX at a mercury drop electrode at -1.55V versus Ag/AgCl, in a borate buffer of pH 8.8, and the possibility of accumulating the compound at the electrode surface. Because the presence of dissolved oxygen did not interfere significantly with the analysis, it was also possible to determine PRX using FIA-SWAdSV. This method enables analysis of up to 120 samples per hour at reduced costs. Both methods developed were validated and successfully applied to the quantification of PRX in pharmaceutical products.

Electrochemistry↗

PubMed2005

Electroanalytical study of the antidepressant sertraline.

A flow injection square wave cathodic stripping voltammetric method has been developed for the determination of sertraline in a pharmaceutical preparation. The method shows linearity between peak current intensity and sertraline concentration for the interval between 0.20 x 10(-6) and 1.20 x 10(-6) mol L(-1). Limits of detection and quantification were found to be 1.5 x 10(-7) and 5.0 x 10 (-7) mol L(-1), respectively. Up to 70 samples per hour can be analysed with a good precision (R.S.D. = 2.5%). The proposed method was successfully applied to the determination of sertraline in a commercial product. In the voltammetric determination of sertraline in flow, a high sample rate is obtained at reduced costs, opening the possibility to compete with the chromatographic methods generally used for this analysis.

Electrochemistry↗

PubMed2005

Electroanalytical study of fluvoxamine.

Fluvoxamine (FVX) can be reduced at a mercury-drop electrode, with a maximum peak current intensity being obtained at a potential of -0.7 V vs. Ag/AgCl, in an aqueous electrolyte solution of pH 2. The compound was determined in a pharmaceutical product and in spiked human serum by square-wave adsorptive-stripping voltammetry (SWAdSV) after accumulation at the electrode surface, under batch conditions. Because the presence of dissolved oxygen did not interfere significantly with the analysis, it was also possible to determine FVX in the pharmaceutical product by use of a flow-injection analysis (FIA) system with SWAdSV detection. The methods developed were validated and successfully applied to the quantification of FVX in a pharmaceutical product. Recoveries between 76 and 89% were obtained in serum analysis. The FIA-SWAdSV method enabled analysis of up to 120 samples per hour at reduced cost, implying the possibility of competing with the chromatographic methods usually used for this analysis.

Electrochemistry↗

PubMed2002

Automatic flow system with voltammetric detection for diacetyl monitoring during brewing process.

Diacetyl can be determined by adsorptive stripping voltammetry after derivatization with o-phenylenediamine. The method may be applicable to the determination of diacetyl in different foods, being a good alternative to other analytical methods. In this work an on-line automated analytical system for diacetyl determination in beer is described. A hanging mercury drop electrode voltammetric flow detector was used, and the analyte was determined without the traditional deoxygenation procedure. The method was successfully applied to the determination of diacetyl during beer fermentation and in the final product. The automation strategy used was based on a flow network similar to those used in multicommutated flow systems, with a pervaporation unit used for diacetyl separation. The developed system was tested in real conditions in the monitoring of brewing processes. The results obtained were similar to those obtained with the usual GC-ECD methodology in the 5-600 ppb range. The analytical rate of the developed method is about 12 determinations/h.

Autoanalysis↗