PubMed Health⌕ Search

Biomedical subjects

Asako Minagawa

Publications and source records attributed to Asako Minagawa.

9 recordsLinked to original sources

Identification by Mn2+ rescue of two residues essential for the proton transfer of tRNase Z catalysis.

Thermotoga maritima tRNase Z cleaves pre-tRNAs containing the 74CCA76 sequence precisely after the A76 residue to create the mature 3' termini. Its crystal structure has revealed a four-layer alphabeta/betaalpha sandwich fold that is typically found in the metallo-beta-lactamase superfamily. The well-conserved six histidine and two aspartate residues together with metal ions are assumed to form the tRNase Z catalytic center. Here, we examined tRNase Z variants containing single amino acid substitutions in the catalytic center for pre-tRNA cleavage. Cleavage by each variant in the presence of Mg2+ was hardly detected, although it is bound to pre-tRNA. Surprisingly, however, Mn2+ ions restored the lost Mg2+-dependent activity with two exceptions of the Asp52Ala and His222Ala substitutions, which abolished the activity almost completely. These results provide a piece of evidence that Asp-52 and His-222 directly contribute the proton transfer for the catalysis.

Amino Acid Sequence↗

Substrate recognition ability differs among various prokaryotic tRNase Zs.

There exists a significant difference in pre-tRNA preference among prokaryotic tRNase Zs. This is an enigma, because pre-tRNAs should form the common L-shaped structure and tRNase Zs should form the common structure based on the alphabeta/betaalpha-fold. To address this issue, we examined six different eubacterial and archaeal tRNase Zs including two newly isolated tRNase Zs for cleavage of 18 different pre-tRNA substrates. Two Thermotoga maritima, one Thermus thermophilus, one Bacillus subtilis, one Thermoplasma acidophilum, and one Pyrobaculum aerophilum enzymes were tested. To our surprise, the newly isolated proteins T. maritima and T. thermophilus showed the weak tRNase Z activity, even though their primary amino acid sequences are, on the whole, quite different from those of the typical tRNase Zs. We confirmed that substrate recognition ability is quite different among those tRNase Zs. In addition, we found that the optimal conditions as a whole differ significantly among the enzymes. From these results, we provided several clues to solve the enigma by showing the potential importance of the 74th-76th nucleotide sequence of pre-tRNA, the flexible arm length of tRNase Z, the divalent metal ion species, and the histidine corresponding His222 in T. maritima tRNase Z.

Amino Acid Sequence↗

Unstructured RNA is a substrate for tRNase Z.

tRNase Z, which exists in almost all cells, is believed to be working primarily for tRNA 3' maturation. In Escherichia coli, however, the tRNase Z gene appears to be dispensable under normal growth conditions, and its physiological role is not clear. Here, to investigate a possibility that E. coli tRNase Z cleaves RNAs other than pre-tRNAs, we tested several unstructured RNAs for cleavage. Surprisingly, all these substrates were cleaved very efficiently at multiple sites by a recombinant E. coli enzyme in vitro. tRNase Zs from Bacillus subtilis and Thermotoga maritima also cleaved various unstructured RNAs. The E. coli and B. subtilis enzymes seem to have a tendency to cleave after cytidine or before uridine, while cleavage by the T. maritima enzyme inevitably occurred after CCA in addition to the other cleavages. Assays to determine optimal conditions indicated that metal ion requirements differ between B. subtilis and T. maritima tRNase Zs. There was no significant difference in the observed rate constant between unstructured RNA and pre-tRNA substrates, while the K(d) value of a tRNase Z/unstructured RNA complex was much higher than that of an enzyme/pre-tRNA complex. Furthermore, eukaryotic tRNase Zs from yeast, pig, and human cleaved unstructured RNA at multiple sites, but an archaeal tRNase Z from Pyrobaculum aerophilum did not.

Bacillus subtilis↗

The missense mutations in the candidate prostate cancer gene ELAC2 do not alter enzymatic properties of its product.

The candidate prostate cancer gene ELAC2 encodes tRNA 3' processing endoribonuclease (tRNase ZL). We produced recombinant human tRNase ZL's, which contain one to three amino-acid substitutions from three missense mutations (Ser217Leu, Ala541Thr, and Arg781His) that are associated with the occurrence of prostate cancer. These enzymes were examined for the pre-tRNA cleavage and the RNase 65 activity. We did not observe any differences in enzymatic properties such as Km and k(cat) values between the wild-type tRNase ZL and its variants. We conclude that there is no causality between the enzymatic properties of tRNase ZL and the prostate cancer.

Endoribonucleases↗

Crystal structure of the tRNA 3' processing endoribonuclease tRNase Z from Thermotoga maritima.

The maturation of the tRNA 3' end is catalyzed by a tRNA 3' processing endoribonuclease named tRNase Z (RNase Z or 3'-tRNase) in eukaryotes, Archaea, and some bacteria. The tRNase Z generally cuts the 3' extra sequence from the precursor tRNA after the discriminator nucleotide. In contrast, Thermotoga maritima tRNase Z cleaves the precursor tRNA precisely after the CCA sequence. In this study, we determined the crystal structure of T. maritima tRNase Z at 2.6-A resolution. The tRNase Z has a four-layer alphabeta/betaalpha sandwich fold, which is classified as a metallo-beta-lactamase fold, and forms a dimer. The active site is located at one edge of the beta-sandwich and is composed of conserved motifs. Based on the structure, we constructed a docking model with the tRNAs that suggests how tRNase Z may recognize the substrate tRNAs.

Amino Acid Sequence↗

The N-terminal half-domain of the long form of tRNase Z is required for the RNase 65 activity.

Transfer RNA (tRNA) 3' processing endoribonuclease (tRNase Z) is an enzyme responsible for the removal of a 3' trailer from pre-tRNA. There exists two types of tRNase Z: one is a short form (tRNase ZS) that consists of 300-400 amino acids, and the other is a long form (tRNase ZL) that contains 800-900 amino acids. Here we investigated whether the short and long forms have different preferences for various RNA substrates. We examined three recombinant tRNase ZSs from human, Escherichia coli and Thermotoga maritima, two recombinant tRNase ZLs from human and Saccharomyces cerevisiae, one tRNase ZL from pig liver, and the N- and C-terminal half regions of human tRNase ZL for cleavage of human micro-pre-tRNA(Arg) and the RNase 65 activity. All tRNase ZLs cleaved the micro-pre-tRNA and showed the RNase 65 activity, while all tRNase ZSs and both half regions of human tRNase ZL failed to do so with the exception of the C-terminal half, which barely cleaved the micro-pre-tRNA. We also show that only the long forms of tRNase Z can specifically cleave a target RNA under the direction of a new type of small guide RNA, hook RNA. These results indicate that indeed tRNase ZL and tRNase ZS have different substrate specificities and that the differences are attributed to the N-terminal half-domain of tRNase ZL. Furthermore, the optimal concentrations of NaCl, MgCl2 and MnCl2 differed between tRNase ZSs and tRNase ZLs, and the K(m) values implied that tRNase ZLs interact with pre-tRNA substrates more strongly than tRNase ZSs.

Amino Acid Sequence↗

A novel 4-base-recognizing RNA cutter that can remove the single 3' terminal nucleotides from RNA molecules.

Mammalian tRNase ZL shows versatility in substrate recognition. This enzyme can not only process pre-tRNAs by cleaving off their 3' trailer sequences, but also recognize and cleave pre-tRNA-like complexes and micro-pre-tRNAs. Here we demonstrate that 24-27 nt hairpin RNAs (hook RNAs) can guide cleavages of separate target RNAs by tRNase ZL through the micro-pre-tRNA-like complexes between the targets and the hook RNAs and that tRNase ZL together with hook RNA works as 4-7-base-recognizing RNA cutters. The cleavage sites were located only after the nucleotide corresponding to the discriminator nucleotide. Cleavage assays for various substrate/hooker complexes showed that the cleavage efficiency changes depending on the maximum number of substrate/hooker recognition base pairings and the stem length of hook RNA and that a 5 nt recognition sequence and a hook RNA containing a 6 or 7 bp stem are the best combination for the optimal target cleavage. We also show that a 4-base RNA cutter can remove the single 3' terminal nucleotides from RNA molecules. These results indicate that this new type of RNA cutter can be utilized to homogenize at their 3' termini RNA transcripts synthesized in vitro with a bacteriophage RNA polymerase.

Base Pairing↗

A novel endonucleolytic mechanism to generate the CCA 3' termini of tRNA molecules in Thermotoga maritima.

The tRNA 3'-terminal CCA sequence is essential for aminoacylation of the tRNAs and for translation on the ribosome. The tRNAs are transcribed as larger precursor molecules containing 5' and 3' extra sequences. In the tRNAs that do not have the encoded CCA, the 3' extra sequence after the discriminator nucleotide is usually cleaved off by the tRNA 3' processing endoribonuclease (3' tRNase, or RNase Z), and the 3'-terminal CCA residues are added thereto. Here we analyzed Thermotoga maritima 3' tRNase for enzymatic properties using various pre-tRNAs from T. maritima, in which all 46 tRNA genes encode CCA with only one exception. We found that the enzyme has the unprecedented activity that cleaves CCA-containing pre-tRNAs precisely after the CCA sequence, not after the discriminator. The assays for pre-tRNA variants suggest that the CA residues at nucleotides 75 and 76 are required for the enzyme to cleave pre-tRNAs after A at nucleotide 76 and that the cleavage occurs after nucleotide 75 if the sequence is not CA. Intriguingly, the pre-tRNA(Met) that is the only T. maritima pre-tRNA without the encoded CCA was cleaved after the discriminator. The kinetics data imply the existence of a CCA binding domain in T. maritima 3' tRNase. We also identified two amino acid residues critical for the cleavage site selection and several residues essential for the catalysis. Analysis of cleavage sites by 3' tRNases from another eubacteria Escherichia coli and two archaea Thermoplasma acidophilum and Pyrobaculum aerophilum corroborates the importance of the two amino acid residues for the cleavage site selection.

Amino Acid Motifs↗

A candidate prostate cancer susceptibility gene encodes tRNA 3' processing endoribonuclease.

tRNA 3' processing endoribonuclease (3' tRNase) is an enzyme responsible for the removal of a 3' trailer from precursor tRNA (pre-tRNA). We purified approximately 85 kDa 3' tRNase from pig liver and determined its partial sequences. BLAST search of them suggested that the enzyme was the product of a candidate human prostate cancer susceptibility gene, ELAC2, the biological function of which was totally unknown. We cloned a human ELAC2 cDNA and expressed the ELAC2 protein in Escherichia coli. The recombinant ELAC2 was able to cleave human pre-tRNA(Arg) efficiently. The 3' tRNase activity of the yeast ortholog YKR079C was also observed. The C-terminal half of human ELAC2 was able to remove a 3' trailer from pre-tRNA(Arg), while the N-terminal half failed to do so. In the human genome exists a gene, ELAC1, which seems to correspond to the C-terminal half of 3' tRNase from ELAC2. We showed that human ELAC1 also has 3'-tRNase activity. Furthermore, we examined eight ELAC2 variants that seem to be associated with the occurrence of prostate cancer for 3'-tRNase activity. Seven ELAC2 variants which contain one to three amino acid substitutions showed efficient 3'-tRNase activities, while one truncated variant, which lacked a C-terminal half region, had no activity.

Amino Acid Sequence↗