PubMed Health⌕ Search

Biomedical subjects

Astrid R Jacobson

Publications and source records attributed to Astrid R Jacobson.

8 recordsLinked to original sources

Environmental factors determining the trace-level sorption of silver and thallium to soils.

Silver (Ag) and thallium (Tl) are nonessential elements that can be highly toxic to a number of biota even when present in the environment at trace levels. In spite of that, the literature on the chemistry and fate of Ag and Tl in soils is extremely scanty. In that context, the key objective of this research was to compare the sorption characteristics of trace amounts of Ag and Tl on a range of soils and minerals. A second objective was to determine the extent to which the composition and surface chemistry of the sorbents, as well as other environmental factors (simulated acid rain application and the presence of competing ions like K+ and NH4+) influence the sorption and lability of Ag and Tl. To this end, short-term and long-term sorption isotherms were generated under batch conditions for trace levels of Ag and Tl onto three illite-rich mineral soils from central New York (silt loam and fine sandy loam), a peaty-muck soil drained for agricultural use, and soil minerals (ferrihydrite and birnessite). Silver sorbed more strongly than thallium to all the soils. The peaty-muck soil sorbed Ag more strongly than the mineral soils, confirming that silver sorption to soils is dominated by soil organic matter either through exchange or complexation. The organic matter-rich soil's retention of Tl, however, was similar to that of the sandy soil. Amounts of Ag and Tl sorbed to the mineral soils increased after a 1-year incubation period. Whereas Ag sorption to the peaty-muck soil also increased with time, Tl sorption was unaffected. Short batch studies indicated that high amounts of Tl sorb to birnessite (30% by mass). However, subsequent X-ray diffraction (XRD) analysis of the solid did not detect the presence of any Tl3+ as Tl2O3 on the MnO4. In contrast, TlI was relatively poorly sorbed on noncrystalline ferrihydrite at pH 5.1 (1.5% by mass). Thus, Mn oxides may play a role in Tl retention by soils; whereas, contrary to previous reports, iron oxides do not effectively sorb Tl. Acid rain and addition of potassium (K+) and ammonium (NH4+) as competing ions had no long-term effect on Ag or Tl sorption. Thallium remaining in the all the batch sorption solutions, as determined by flame atomic absorption spectroscopy (FAAS) and differential pulse anodic stripping voltametry (DPASV), was completely labile, which may have important environmental consequences.

Adsorption↗

Reduction of silver solubility by humic acid and thiol ligands during acanthite (beta-Ag2S) dissolution.

Precipitation of highly insoluble metal sulfide minerals like acanthite (beta-Ag2S) or red cinnabar (HgS) is in principle an effective means to reduce metal availability and toxicity in contaminated soils. Unfortunately, experiments have shown that red cinnabar may be solubilized in the presence of dissolved organic matter or thiol ligands. To determine whether the same applies to acanthite, a laboratory synthesized beta-Ag2S mineral was incubated for up to 3 weeks in the presence of KNO3, dissolved humic acids, cysteine, methionine and thiosulfate. XPS analysis identified Ag2O (52%), Ag2SO4 (8%) and Ag2S (40%) on the particle surfaces. Ag was released into solution in the presence of KNO3 and methionine, presumably from mixed-oxidation surface layers. Contrary to earlier results with cinnabar, however, humic acids reduced Ag concentrations in solution by about 75%, and cysteine and thiosulfate, each containing a free -SH functional group, almost completely suppressed Ag release into solution.

Humans↗

Diuron mobility through vineyard soils contaminated with copper.

The herbicide diuron is frequently applied to vineyard soils in Burgundy, along with repeated treatments with Bordeaux mixture (a blend of copper sulfate and calcium hydroxide) that result in elevated copper concentrations. Cu could in principle affect the fate and transport of diuron or its metabolites in the soil either directly by complexation or indirectly by altering the populations or activity of microbes involved in their degradation. To assess the effect of high Cu concentrations on diuron transport, an experiment was designed with ten undisturbed columns of calcareous and acidic soils contaminated with 17--509 mg kg(-1) total Cu (field-applied). Grass was planted on three columns. Diuron was applied to the soils in early May and in-ground lysimeters were exposed to outdoor conditions until November. Less than 1.2% of the diuron applied was found in the leachates as diuron or its metabolites. Higher concentrations were found in the effluents from the grass-covered columns (0.1--0.45%) than from the bare-soil columns (0.02--0.14%), and they were correlated with increases in dissolved organic carbon. The highest amounts of herbicide were measured in acidic-soil column leachates (0.98--1.14%) due to the low clay and organic matter contents of these soils. Cu also leached more readily through the acidic soils (32.8--1042 microg) than in the calcareous soils (9.5--63.4 microg). Unlike in the leachates, the amount of diuron remaining in the soils at the end of the experiment was weakly related to the Cu concentrations in the soils.

Agriculture↗

Electron paramagnetic resonance analysis of the distribution of a hydrophobic spin probe in suspensions of humic acids, hectorite, and aluminum hydroxide-humate-hectorite complexes.

Until recently, there were no techniques capable of direct observation of the microscale locations where nonpolar organic compounds accumulate when associated with natural geosorbents. The ability of electron paramagnetic resonance (EPR) spectroscopy to monitor and elucidate directly the different molecular-scale environments of paramagnetic spin probes has been demonstrated lately in model soils, yet it remains untested in complex systems. In this general context, the present investigation was aimed at assessing the extent to which EPR could be used to monitor the sorption of 4-hydroxy-2,2,6,6-tetramethyl-piperidinyloxy benzoate (TEMPO benzoate), a hydrophobic spin probe, on a smectite (hectorite), two humic acids, and their complexes in the presence or absence of aluminum hydroxide. Results demonstrate that EPR is able to monitor easily adsorption on these sorbents in batch-style experiments. Distribution coefficient (Kd) values of 455.4 and 483.1 ml/g were found for the adsorption of TEMPO benzoate on hectorite-humic acids complexes, compared to respective Kd values of 46 and 147 ml/g predicted solely on the basis of the mass of humic acids present in the complexes. These observations confirm the significant role of hectorite for the sorption of hydrophobic compounds, together with humic acids, contrary to common belief that emphasizes the almost exclusive sorptive role of organic matter. In addition, for the first time, EPR is able to provide evidence that hydrophobic molecules in the presence of geosorbents can segregate in multimolecular clusters that are in equilibrium with aqueous probe concentrations below the probe's solubility threshold. Possible consequences of this clustering process in terms of the fate and transport of hydrophobic compounds in subsurface environments are discussed.

Adsorption↗

Lead phosphate minerals: solubility and dissolution by model and natural ligands.

Due to their relatively low solubility, lead-phosphate minerals may control Pb solution levels at a low value in natural environments. We reportthe solubility of Pb from two lead-orthophosphate mineral suspensions (beta-Pb9(PO4)6 and PbHPO4) after aging for 3 years. Lead (Pb2+) activity in the aged suspensions was compared to the activity calculated using the Ksp values of various Pb-PO4 minerals reported in the literature. We also determine the time-dependent dissolution of the aged lead-phosphate minerals by organic and inorganic ligands containing S-functional groups (cysteine, methionine, and thiosulfate) and by a soil extracted humic acid. We find the activity of Pb2+ in the aged lead-phosphate suspensions to be 1-2 orders of magnitude higher than predicted by the Ksp values reported in the literature. Disagreement between measured and Ksp-calculated activities has been reported in other investigations of Pb-PO4 minerals; we compiled some of the data and present them together with our results. Furthermore, the time-dependent dissolution experiments indicate that, in most cases, lead phosphates are partly dissolved in the presence of soluble ligands, i.e., model sulfides and humic acid. The soil-extracted humic acid enhanced the dissolution of Pb from the high pH (7.2) lead-phosphate (beta-Pb9(PO4)6) mineral while suppressing Pb dissolution from the low pH (3.8) lead-phosphate (PbHPO4) mineral. While the low molecularweight sulfur-containing ligands enhanced Pb dissolution, their effect was less pronounced. We conclude that (i) nonequilibrium conditions prevail in the mineral suspensions even after 3 years of aging; and (ii) soluble ligands present in soils, sediments, and natural waters can potentially dissolve Pb from lead-phosphate minerals; such ligands, then, may enhance the biological availability and mobility of Pb in the environment.

Biological Availability↗

Aging and temperature effects on DOC and elemental release from a metal contaminated soil.

The combined effect of time and temperature on elemental release and speciation from a metal contaminated soil (Master Old Site, MOS) was investigated. The soil was equilibrated at 10, 28, 45, 70 and 90 degrees C for 2 days, 2 weeks, and 2 months in the laboratory. Dissolved organic carbon (DOC), total soluble elements (by ICP), and labile metals (by DPASV) were determined in the filtered (0.22 microm) supernatants. For the samples equilibrated at 90 degrees C, DOC fractions were size fractionated by filtration and centrifugation; a subsample was only centrifuged while another was also filtered through a 0.45 microm filter. Analyses of the supernatants (ICP, DPASV, DOC) were performed on all size fraction subsamples. Dissolved organic carbon (DOC) increased both with temperature and incubation time; however, metal behavior was not as uniform. In general, total soluble metal release (ICP) paralleled the behavior of DOC, increasing with both time and temperature, and confirming the importance of soil organic matter (SOM) in metal retention. Voltammetric analysis (dpasv) of Cu and Zn showed that very little of these metals remains labile in solution due, presumably, to complexation with dissolved organic matter. Labile concentrations of Cd, on the other hand, constituted a significant portion (50%) of total soluble Cd. Copper and Al increased in solution with time (up to 2 months) and temperature up to 70 degrees C; however, at 90 degrees C the soluble concentration declined sharply. The same behavior was observed after equilibration for longer periods of time (550 days) at lower temperatures (23 and 70 degrees C). While concentrations of labile Cu and total soluble Cu and Al increased in the unfiltered samples, the trend remained the same. DPASV analysis showing shifts in labile Cu complexes with temperature and time, together with the results from the unfiltered samples, lead to the hypothesis that Cu was complexing with large polymers that could form at the elevated temperature, and thus be removed from the analyzed solution. It is possible that Cu and Al released by SOM oxidation has re-sorbed or complexed to more recalcitrant organic matter or to mineral phases. Variations in the relative molecular size fractions present within the DOC pool produced by increased time and temperature may influence the element-DOC complexes present in solution and their behavior in soil environments.

Metals, Heavy↗

Modelling the dynamics of pentachlorophenol bioavailability in column experiments.

The aqueous-phase concentration of an organic pollutant found in a subsurface environment is often assumed to be its bioavailable concentration. However, the aqueous-phase concentration does not adequately reflect the dynamics of contaminant availability to microbes in flow-through systems. This paper assesses the effects of interacting processes such as sorption, biodegradation, and transport on contaminant bioavailability, and the fraction of the bioavailable contaminant that is taken up by microbes. The evolution of the bioavailable and uptake fractions is studied in two ways. Firstly, column experiments are conducted in which the introduced contaminant (pentachlorophenol, PCP) can flow through the columns, be consumed by microorganisms, or be sorbed by a solid matrix. Secondly, a phenomenological model (Flow/Sink/Reservoir model) that illustrates the dynamic nature of bioavailability and quantifies the uptake fraction is developed, based on a flow balance. Results show that after 60 h of sorption-limited bioavailability, the microorganisms induce desorption, so that the sorbed pool becomes bioavailable and bioavailability is limited by the PCP injection rate. A conclusion is drawn that the aqueous-phase concentration is a poor indicator of contaminant bioavailability to microbes.

Adsorption↗