PubMed Health⌕ Search

Biomedical subjects

Atsushi Ikai

Publications and source records attributed to Atsushi Ikai.

14 recordsLinked to original sources

mRNA analysis of single living cells.

Analysis of specific gene expression in single living cells may become an important technique for cell biology. So far, no method has been available to detect mRNA in living cells without killing or destroying them. We have developed here a novel method to examine gene expression of living cells using an atomic force microscope (AFM). AFM tip was inserted into living cells to extract mRNAs. The obtained mRNAs were analyzed with RT-PCR, nested PCR, and quantitative PCR. This method enabled us to examine time-dependent gene expression of single living cells without serious damage to the cells.

Journal Article↗

Specific interaction between GroEL and denatured protein measured by compression-free force spectroscopy.

We investigated the interaction between GroEL and a denatured protein from a mechanical point of view using an atomic force microscope. Pepsin was bound to an atomic force microscope probe and used at a neutral pH as an example of denatured proteins. To measure a specific and delicate interaction force, we obtained force curves without pressing the probe onto GroEL molecules spread on a mica surface. Approximately 40 pN of tensile force was observed for approximately 10 nm while pepsin was pulled away from the chaperonin after a brief contact. This length of force duration corresponding to the circumference of GroEL's interior cavity was shortened by the addition of ATP. The relation between the observed mechanical parameters and the chaperonin's refolding function is discussed.

Adenosine Triphosphate↗

Molecular cloning and structural characterization of the hagfish proteinase inhibitor of the alpha-2-macroglobulin family.

The "most primitive" living vertebrate the hagfish has a dimeric proteinase inhibitor, a protein homologous to human alpha2-macroglobulin, in its plasma at high concentration. Although the hagfish proteinase inhibitor has been isolated and its function and quaternary structure studied, its primary structure, subunit composition and fragmentation process remain unclear. In this study, hagfish proteinase inhibitor cDNA was cloned, sequenced and cDNA-deduced amino acid sequence was analyzed. A large fraction of homosubunits in the dimeric structure of the protein has undergone a cleavage at a specific arginyl residue (Arg833) while the rest retained their chain integrity without being processed. Thus random combinations of processed and nonprocessed subunits in the dimeric structure of this protein result in different molecular conformers and generate a complicated multiband pattern in SDS-PAGE. It was further demonstrated by proteolytic analysis that the hagfish inhibitor has no susceptible arginyl residues within its bait region and thus incapable of trapping arginine specific proteinases. This implies that the specific subunit cleavage at Arg833 was caused by an unknown arginine specific proteinase which escaped from the entrapment by the hagfish inhibitor.

Alpha-Globulins↗

Nano-mechanical methods in biochemistry using atomic force microscopy.

The atomic force microscope has been extensively used not only to image nanometer-sized biological samples but also to measure their mechanical properties by using the force curve mode of the instrument. When the analysis based on the Hertz model of indentation is applied to the approach part of the force curve, one obtains information on the stiffness of the sample in terms of Young's modulus. Mapping of local stiffness over a single living cell is possible by this method. The retraction part of the force curve provides information on the adhesive interaction between the sample and the AFM tip. It is possible to functionalize the AFM tip with specific ligands so that one can target the adhesive interaction to specific pairs of ligands and receptors. The presence of specific receptors on the living cell surface has been mapped by this method. The force to break the co-operative 3D structure of globular proteins or to separate a double stranded DNA into single strands has been measured. Extension of the method for harvesting functional molecules from the cytosol or the cell surface for biochemical analysis has been reported. There is a need for the development of biochemical nano-analysis based on AFM technology.

Animals↗

A comparative immunocytochemical study of development and regeneration of chemosensory neurons in the rat vomeronasal system.

Vomeronasal neurons undergo continuous neurogenesis during development and after neuronal injury. We used immunocytochemical methods to compare different stages of the vomeronasal organ development to those of regeneration following vomeronasal nerve transection. At E15 and at 6 to 10 days after injury, nestin-positive cells were observed throughout the sensory epithelium. We did not find nestin immunoreactivity to be localized to the boundary region of the epithelium. The early appearance and wide distribution of nestin-positive cells suggests that they represent chemosensory precursor cells that develop and migrate vertically in the epithelium. Vomeronasal receptor cells degenerated 6 to 8 days after nerve transection, but axon terminals in the accessory olfactory bulb (AOB) continued to show the presence of the chemosensory specific marker (OMP) for up to ten days, a significant finding observed in this study. It is likely that the distance from the site of nerve transection may contribute to differences in the time course of anterograde and retrograde axon degradation. OMP-positive neurons were observed in the normal adult epithelium and to a much lesser extent 10-60 days after recovery from nerve transection. Axons from regenerated receptor cells did not reach the AOB during this time period. This failure to reestablish connections with target cells in the AOB could explain why OMP-positive cells were rarely observed among the regenerated cells in the vomeronasal epithelium.

Aging↗

The importance of being knotted: effects of the C-terminal knot structure on enzymatic and mechanical properties of bovine carbonic anhydrase II.

In order to better understand the contribution of the knotted folding pattern to the enzymatic and mechanical properties of carbonic anhydrases, we replaced Gln-253 of bovine carbonic anhydrase II with Cys, which allowed us to measure the mechanical strength of the protein against tensile deformation by avoiding knot tightening. The expressed protein, to our surprise, turned out to contain two conformational isomers, one capable of binding an enzymatic inhibitor and the other not, which led to their separation through affinity chromatography. In near- and far-UV circular dichroism and fluorescence spectra, the separated conformers were very similar to each other and to the wild-type enzyme, indicating that they both had native-like conformations. We describe new evidence which supports the notion that the difference between the two conformers is likely to be related to the completeness of the C-terminal knot formation.

Amino Acid Substitution↗

Reversible stretching of a monomeric unit in a dimeric bovine carbonic anhydrase B with the atomic force microscope.

We have previously shown that a full stretching of native carbonic anhydrase B (CAB) using the atomic force microscope could not be achieved, presumably due to the presence of a 'knot' in the C-terminal region of the protein. When we used an engineered dimer of CAB, where the N-terminal monomeric unit (unit I) was expected to be 'knotless', we successfully recorded extension of the protein up to 110 nm which was long enough to account for the full extension of unit I monomer. In this paper we report that, by limiting the maximum length of extension to 90 nm extensions (corresponding to about 80 nm extension of the dimer and 70 nm of unit I), retractions of the polypeptide chain can be repeated cyclically without breaking the covalent crosslinking system. The force-extension curves obtained from the forward and reverse cycles of such experiments were almost perfectly superimposable with each other and with the corresponding part of the curves obtained from full extension experiments suggesting that the structure of unit I in the dimer was reversibly stretched and contracted. During the stretching of unit I of the dimer in either type of the experiments mentioned above, we occasionally observed a force peak having the force of about 0.5-0.7 nN when extension length reached 40-50 nm. We interpreted the appearance of such force peaks as an indication of formation of a tightly folded domain structure in unit I of CAB dimer.

Animals↗

Use of AFM for imaging and measurement of the mechanical properties of light-convertible organelles in plants.

We obtained topographic images of etioplasts and chloroplasts and measured their elasticity in a physiological buffer using an atomic force microscope (AFM) and found a possible correlation between the morphological and mechanical properties during the light conversion of etioplasts to chloroplasts. Alcian blue 8GX dye was found to be effective for immobilizing the plant organelles stably on a glass surface for AFM experiments. We employed the tapping-mode AFM with a cantilever soft enough to measure the elasticity of the organelles in a liquid solution. The best images of soft, spherical organelles were obtained using the tapping-mode AFM with oscillation at the thermal vibration frequency of the cantilever of around 3 kHz. Whereas etioplasts were found to be smooth-surfaced and stiff against compression by the AFM tip, before light conversion to chloroplasts, they became rough-surfaced and mechanically soft after exposure to light. The elasticity of etioplasts was 20 times higher than that of chloroplasts, probably reflecting changes in their inner structures.

Chloroplasts↗

Combination of AFM with an objective-type total internal reflection fluorescence microscope (TIRFM) for nanomanipulation of single cells.

A new instrument was constructed by combining an objective-type total internal reflection fluorescence microscope with an atomic force microscope (AFM). Our purpose of constructing such an instrument is to detect and confirm the result of cellular level manipulations made with the AFM part through the detection system of the highly sensitive fluorescence microscope part. In this combination, manipulations are now possible from the nanometer to the micrometer scales and the fluorescence detection system is sensitive enough even for localizing single molecules. In this paper, we applied the system as a precise intracellular injector (nanoplanter). Fluorescent beads were first chemically immobilized onto a ZnO whisker that was glued to an AFM tip and were injected into a living BALB/3T3 cell together with the whisker. It was demonstrated that the system could clearly show the result of injection, that is, the presence of a small number of fluorescent beads in the cell.

3T3 Cells↗

Imaging saponin-induced structural changes in neural processes with atomic force microscopy.

Temporal changes in the structure of neuronal processes in the presence of saponin were studied by atomic force microscopy in a fluid medium. After saponin treatment, concavities were formed on the surface of some neurites and fibrous structures in other neurites were splayed. The vertical height of these splayed fibrils or fibrillar bundles ranged from 13 to 370 nm, and the horizontal width was less than 500 nm. These findings suggest that formation of concavities and separation of bundled fibrils occurred simultaneously in saponin-treated neurites.

Animals↗

Unfolding mechanics of holo- and apocalmodulin studied by the atomic force microscope.

The structural stability of calmodulin (CaM) has been investigated previously by chemical and thermal methods. The calcium-loaded form of CaM has been found to be exceptionally stable, because it can be exposed to temperatures >90 degrees C or to a 9 M urea solution without a marked change in its tertiary structure, and is therefore not experimentally accessible for unfolding studies using conventional analytical methods. In this study, we have developed a system for measuring the force for mechanically unfolding CaM using an atomic force microscope (AFM) by stretching the protein from its N- and C-terminal residues; we have been successful in obtaining force versus extension (F-E) curves for both apo and holo forms of CaM. In our experiment, distinguishable F-E curves have been obtained upon stretching of apoCaM and holoCaM to their full extensions. A very low force observed upon stretching of apoCaM indicated a relatively high flexibility of the apo form. On the contrary, a relatively high unfolding force and the appearance of a characteristic force peak were noted during full stretching of holoCaM. The F-E curve of the latter form of CaM most likely reflects a more rigid and probably more organized conformation of holoCaM than that of apoCaM. These experiments confirmed that the AFM is able to clearly distinguish two functionally distinct forms of CaM in terms of their mechanical properties.

Apoproteins↗

Mapping of the receptor-associated protein (RAP) binding proteins on living fibroblast cells using an atomic force microscope.

The distribution of the receptor-associated protein (RAP) binding protein and the adhesion forces between RAP and its binding protein on living fibroblast cells were examined using an atomic force microscope (AFM). The distribution of RAP binding protein was obtained on 256 (16x16) locations in 2x2 micro m sections over the surface of living cells. The adhesion forces between RAP and the binding protein were measured with an AFM tip functionalized with RAP. In the presence of RAP in the scanning solution, the number of force curves with large adhesion force decreased. These results indicate that the adhesive forces observed here represent specific binding between RAP and the binding protein. This method will be a useful application of AFM to examine receptors on cell surfaces in high resolution.

Animals↗

Quantification of cell adhesion force with AFM: distribution of vitronectin receptors on a living MC3T3-E1 cell.

Distribution of vitronectin (VN) receptors on a living murine osteoblastic cell was successfully measured by atomic force microscopy (AFM). First, the distribution of the integrin beta(5) subunit which constitutes a part of the VN receptor on the cell was confirmed by conventional immunohistochemistry after fixing the cell. To visualize the distribution of the receptor on a living cell by an independent and potentially a more quantitative method, the AFM was used with a microbead attached to the cantilever tip to increase the area of contact and VN was immobilized on the microbead. Force measurements were then performed over a large area of a living murine osteoblastic cell using the microbead covered with VN.

Animals↗