Biomedical subjects

Ayman F Abouraddy

Publications and source records attributed to Ayman F Abouraddy.

6 recordsLinked to original sources

PubMed2006

Large-scale optical-field measurements with geometric fibre constructs.

Optical fields are measured using sequential arrangements of optical components such as lenses, filters, and beam splitters in conjunction with planar arrays of point detectors placed on a common axis. All such systems are constrained in terms of size, weight, durability and field of view. Here a new, geometric approach to optical-field measurements is presented that lifts some of the aforementioned limitations and, moreover, enables access to optical information on unprecedented length and volume scales. Tough polymeric photodetecting fibres drawn from a preform are woven into light-weight, low-optical-density, two- and three-dimensional constructs that measure the amplitude and phase of an electromagnetic field on very large areas. First, a three-dimensional spherical construct is used to measure the direction of illumination over 4pi steradians. Second, an intensity distribution is measured by a planar array using a tomographic algorithm. Finally, both the amplitude and phase of an optical wave front are acquired with a dual-plane construct. Hence, the problem of optical-field measurement is transformed from one involving the choice and placement of lenses and detector arrays to that of designing geometrical constructions of polymeric, light-sensitive fibres.

Journal Article↗

PubMed2006

Three-dimensional polarization control in microscopy.

We propose an approach to optical microscopy that enables full control over the three-dimensional polarization vector at the focal spot of a high-numerical-aperture lens. The input field to the lens is linearly polarized and no polarization optics are needed. This technique utilizes the azimuthal spatial degree of freedom of the input field. We find that only a small set of low-order azimuthal spatial harmonics contributes to the focused field on axis, and a simple transformation exists between the linear vector space of these harmonics and the three-dimensional polarization-vector space. Controlling the relative complex weights of these azimuthal harmonics produces any desired three-dimensional state of polarization.

Algorithms↗

PubMed2005

Complete modal decomposition for optical waveguides.

Virtually all electromagnetic waveguiding structures support a multiplicity of modes. Nevertheless, to date, an experimental method for unique decomposition of the fields in terms of the component eigenmodes has not been realized. The fundamental problem is that all current attempts of modal decomposition do not yield phase information. Here we introduce a noninterferometric approach to achieve modal decomposition of the fields at the output of a general waveguiding structure. The technique utilizes a mapping of the two-dimensional field distribution onto the one-dimensional space of waveguide eigenmodes, together with a phase-retrieval algorithm to extract the amplitudes and phases of all the guided vectorial modes. Experimental validation is provided by using this approach to examine the interactions of 16 modes in a hollow-core photonic-band gap fiber.

Journal Article↗

PubMed2004

Entangled-photon imaging of a pure phase object.

We demonstrate experimentally and theoretically that a coherent image of a pure phase object [implemented by a microelectromechanical system (MEMS) micromirror array] may be obtained by use of a spatially incoherent illumination beam. This is accomplished by employing a two-beam source of entangled photons generated by spontaneous parametric down-conversion. One of the beams probes the phase object while the other is scanned. Though each of the beams is, in and of itself, spatially incoherent, the pair of beams exhibits higher-order interbeam coherence.

Journal Article↗

PubMed2004

Metal-insulator-semiconductor optoelectronic fibres.

The combination of conductors, semiconductors and insulators with well-defined geometries and at prescribed length scales, while forming intimate interfaces, is essential in most functional electronic and optoelectronic devices. These are typically produced using a variety of elaborate wafer-based processes, which allow for small features, but are restricted to planar geometries and limited coverage area. In contrast, the technique of fibre drawing from a preformed reel or tube is simpler and yields extended lengths of highly uniform fibres with well-controlled geometries and good optical transport characteristics. So far, this technique has been restricted to particular materials and larger features. Here we report on the design, fabrication and characterization of fibres made of conducting, semiconducting and insulating materials in intimate contact and in a variety of geometries. We demonstrate that this approach can be used to construct a tunable fibre photodetector comprising an amorphous semiconductor core contacted by metallic microwires, and surrounded by a cylindrical-shell resonant optical cavity. Such a fibre is sensitive to illumination along its entire length (tens of meters), thus forming a photodetecting element of dimensionality one. We also construct a grid of such fibres that can identify the location of an illumination point. The advantage of this type of photodetector array is that it needs a number of elements of only order N, in contrast to the conventional order N2 for detector arrays made of photodetecting elements of dimensionality zero.

Journal Article↗

PubMed2003

Decoherence-free subspaces in quantum key distribution.

We demonstrate that two recent innovations in the field of practical quantum key distribution (one-way autocompensation and passive detection) are closely related to the methods developed to protect quantum computations from decoherence. We present a new scheme that combines these advantages, and propose a practical implementation of this scheme that is feasible using existing technology.

Journal Article↗