PubMed HealthSearch

Biomedical subjects

B Byers

Publications and source records attributed to B Byers.

At least 19 recordsLinked to original sources

Minimal extent of homology required for completion of meiotic recombination in Saccharomyces cerevisiae.

The minimal length of contiguous homology required for successful completion of meiotic recombination was investigated by using heterologous insertions to delimit homologous segments of chromosome III in the yeast Saccharomyces cerevisiae. Constructs created in vitro by insertion of selectable markers into the LEU2 locus were transplaced into haploid strains, which were then mated to create diploids containing pairs of insertion heterologies at various distances. Analysis of the meiotic products from these diploids revealed a gradient in the frequency of both reciprocal and nonreciprocal recombination declining monotonically from the 5' end of LEU2. Both types of event were found to be restricted by the presence of the insertion heterologies. The spo13 single division meiosis was exploited to develop a plating assay in which LEU2 diploid spores containing reciprocally recombinant strands derived from events occurring completely within the interval flanked by the insertion heterologies were selected by random spore methods. Reciprocal recombination frequencies measured with this assay decreased linearly with extent, extrapolating to a minimal homology requirement of 150-250 nucleotides. When homology was most severely restricted, unexpected flanking marker configurations among reciprocal recombinants within LEU2 demonstrated the occurrence of complex recombination events. In addition to detecting reciprocal recombinants, the system is capable of measuring the probability that a non-reciprocal recombination event will have one end-point between the heterologous inserts and the other lying outside the interval. The minimal length of homology required for this aspect of recombination was found to be 25-60 nucleotides.

Base Sequence

Requirement for ESP1 in the nuclear division of Saccharomyces cerevisiae.

Mutations in the ESP1 gene of Saccharomyces cerevisiae disrupt normal cell-cycle control and cause many cells in a mutant population to accumulate extra spindle pole bodies. To determine the stage at which the esp1 gene product becomes essential for normal cell-cycle progression, synchronous cultures of ESP1 mutant cells were exposed to the nonpermissive temperature for various periods of time. The mutant cells retained viability until the onset of mitosis, when their viability dropped markedly. Examination of these cells by fluorescence and electron microscopy showed the first detectable defect to be a structural failure in the spindle. Additionally, flow cytometric analysis of DNA content demonstrated that massive chromosome missegregation accompanied this failure of spindle function. Cytokinesis occurred despite the aberrant nuclear division, which often resulted in segregation of both spindle poles to the same cell. At later times, the missegregated spindle pole bodies entered a new cycle of duplication, thereby leading to the accumulation of extra spindle pole bodies within a single nucleus. The DNA sequence predicts a protein product similar to those of two other genes that are also required for nuclear division: the cut1 gene of Schizosaccharomyces pombe and the bimB gene of Aspergillus nidulans.

Amino Acid Sequence

Characterization of four B-type cyclin genes of the budding yeast Saccharomyces cerevisiae.

The previously described CLB1 and CLB2 genes encode a closely related pair of B-type cyclins. Here we present the sequences of another related pair of B-type cyclin genes, which we term CLB3 and CLB4. Although CLB1 and CLB2 mRNAs rise in abundance at the time of nuclear division, CLB3 and CLB4 are turned on earlier, rising early in S phase and declining near the end of nuclear division. When all possible single and multiple deletion mutants were constructed, some multiple mutations were lethal, whereas all single mutants were viable. All lethal combinations included the clb2 deletion, whereas the clb1 clb3 clb4 triple mutant was viable, suggesting a key role for CLB2. The inviable multiple clb mutants appeared to have a defect in mitosis. Conditional clb mutants arrested as large budded cells with a G2 DNA content but without any mitotic spindle. Electron microscopy showed that the spindle pole bodies had duplicated but not separated, and no spindle had formed. This suggests that the Clb/Cdc28 kinase may have a relatively direct role in spindle formation. The two groups of Clbs may have distinct roles in spindle formation and elongation.

Amino Acid Sequence

A RAD9-dependent checkpoint blocks meiosis of cdc13 yeast cells.

Mutations in CDC13 have previously been found to cause cell cycle arrest of Saccharomyces cerevisiae at a stage in G2 immediately preceding the mitotic division. We show here that cdc13 blocks the meiotic pathway at a stage that follows DNA replication, but in this case the spindle has not yet formed nor have the chromosomes undergone synapsis or recombination. This arrest is alleviated by rad9, thus implicating the same checkpoint function that delays mitotic progression when chromosomal lesions are present. An assessment of the spores produced upon alleviation of the meiotic arrest by rad9 reveals that the absence of recombination in strains bearing cdc13 alone is attributable to the RAD9-mediated arrest rather than to other effects of cdc13 lesions. We have tested the possibility that this checkpoint function is important in regulating meiotic progression to permit resolution of recombinational intermediates during ongoing meiosis and have found no evidence that rad9 alters the execution of functions that might depend upon such regulation. We consider the possible role of other checkpoints in yeast meiosis.

Cell Cycle Proteins

MPS1 and MPS2: novel yeast genes defining distinct steps of spindle pole body duplication.

It is crucial to the eucaryotic cell cycle that the centrosome undergo precise duplication to generate the two poles of the mitotic spindle. In the budding yeast Saccharomyces cerevisiae, centrosomal functions are provided by the spindle pole body (SPB), which is duplicated at the time of bud emergence in G1 of the cell cycle. Genetic control of this process has previously been revealed by the characterization of mutants in CDC31 and KAR1, which prevent SPB duplication and lead to formation of a monopolar spindle. Newly isolated mutations described here (mps1 and mps2, for monopolar spindle) similarly cause monopolar mitosis but their underlying effects on SPB duplication are unique. The MPS1 gene is found by electron microscopy to be essential for proper formation of the site at which the new SPB normally arises adjacent to the existing one. By contrast, a mutation in MPS2 permits duplication to proceed, but the newly formed SPB is structurally defective and unable to serve as a functional spindle pole. Distinct temporal requirements for the CDC31, MPS1, and MPS2 gene functions during the SPB duplication cycle further demonstrate the individual roles of these genes in the morphogenetic pathway.

Cell Cycle

The HOP1 gene encodes a meiosis-specific component of yeast chromosomes.

The HOP1 gene in Saccharomyces cerevisiae is important for meiotic chromosomal pairing, because hop1 diploids fail to form synaptonemal complex during meiosis and are defective in crossing over between, but not within, chromosomes. We demonstrate here that the HOP1 gene is transcriptionally regulated during sporulation and that the HOP1 protein is situated along the lengths of meiotic chromosomes. Furthermore, the HOP1 protein contains a Cys2/Cys2 zinc finger motif. A mutation within this motif that changes a cysteine to serine results in the hop1 phenotype, consistent with the possibility that the HOP1 gene product acts in chromosome synapsis by directly interacting with DNA. These observations demonstrate that HOP1 encodes a component of meiotic chromosomes, perhaps serving as a constituent of the synaptonemal complex.

Amino Acid Sequence

HOP1: a yeast meiotic pairing gene.

The recessive mutation, hop1-1, was isolated by use of a screen designed to detect mutations defective in homologous chromosomal pairing during meiosis in Saccharomyces cerevisiae. Mutants in HOP1 displayed decreased levels of meiotic crossing over and intragenic recombination between markers on homologous chromosomes. In contrast, assays of the hop1-1 mutation in a spo13-1 haploid disomic for chromosome III demonstrated that intrachromosomal recombination between directly duplicated sequences was unaffected. The spores produced by SPO13 diploids homozygous for hop1 were largely inviable, as expected for a defect in interhomolog recombination that results in high levels of nondisjunction. HOP1 was cloned by complementation of the spore lethality phenotype and the cloned gene was used to map HOP1 to the LYS11-HIS6 interval on the left arm of chromosome IX. Electron microscopy revealed that diploids homozygous for hop1 fail to form synaptonemal complex, which normally provides the structural basis for homolog pairing. We propose that HOP1 acts in meiosis primarily to promote chromosomal pairing, perhaps by encoding a component of the synaptonemal complex.

Alleles

Pachytene arrest and other meiotic effects of the start mutations in Saccharomyces cerevisiae.

Mutations in the Start class of cell division cycle genes (CDC28, CDC36 and CDC39) define the point in the G1 phase of the vegetative cycle at which the cell becomes committed to completing another round of cell division. Genetic, cytological and biochemical data demonstrate that these mutations cause meiotic cells to become arrested at pachytene following completion of both chromosomal DNA replication and spindle pole body (SPB) duplication. In contrast these mutations have previously been found to cause arrest of the mitotic cell cycle prior to either of these landmark events, so the role of the Start genes in these events during vegetative growth must be indirect. Our observations are consistent with the hypothesis that CDC28, CDC36 and CDC39 are required for irreversible commitment to nuclear division in both the mitotic and meiotic pathways. CDC28 was additionally found to be required for the SPB separation that precedes spindle formation in preparation for the second meiotic division. Cytological and genetic analyses of this requirement revealed both that such separation may fail independently at either SPB and that ascospore formation can proceed independently of SPB separation.

Cell Division

The yeast cell cycle gene CDC34 encodes a ubiquitin-conjugating enzyme.

Mutants in the gene CDC34 of the yeast Saccharomyces cerevisiae are defective in the transition from G1 to the S phase of the cell cycle. This gene was cloned and shown to encode a 295-residue protein that has substantial sequence similarity to the product of the yeast RAD6 gene. The RAD6 gene is required for a variety of cellular functions including DNA repair and was recently shown to encode a ubiquitin-conjugating enzyme. When produced in Escherichia coli, the CDC34 gene product catalyzed the covalent attachment of ubiquitin to histones H2A and H2B in vitro, demonstrating that the CDC34 protein is another distinct member of the family of ubiquitin-conjugating enzymes. The cell cycle function of CDC34 is thus likely to be mediated by the ubiquitin-conjugating activity of its product.

Amino Acid Sequence

A yeast gene essential for regulation of spindle pole duplication.

In eucaryotic cells, duplication of spindle poles must be coordinated with other cell cycle functions. We report here the identification in Saccharomyces cerevisiae of a temperature-sensitive lethal mutation, esp1, that deregulates spindle pole duplication. Mutant cells transferred to the nonpermissive temperature became unable to continue DNA synthesis and cell division but displayed repeated duplication of their spindle pole bodies. Although entry into this state after transient challenge by the nonpermissive temperature was largely lethal, rare survivors were recovered and found to have become increased in ploidy. If the mutant cells were held in G0 or G1 during exposure to the elevated temperature, they remained viable and maintained normal numbers of spindle poles. These results suggest dual regulation of spindle pole duplication, including a mechanism that promotes duplication as cells enter the division cycle and a negative regulatory mechanism, controlled by ESP1, that limits duplication to a single occurrence in each cell division cycle. Tetrad analysis has revealed that ESP1 resides at a previously undescribed locus on the right arm of chromosome VII.

Cell Cycle

Structural comparison of the yeast cell division cycle gene CDC4 and a related pseudogene.

The function of the cell division cycle gene, CDC4, is required in Saccharomyces cerevisiae for progression beyond the G1 phase of the cell cycle. The wild-type gene was isolated from a plasmid library by selection for complementation of a recessive, temperature-sensitive allele. Hybridization of genomic sequences with the cloned gene revealed the presence of a duplicated sequence. Both CDC4 and the duplicated sequence were subjected to DNA sequence analysis. These analyses revealed (1) that CDC4 contains a large open reading frame encoding a protein of 779 amino acids, and (2) that the duplicated sequence bears strong homology with the carboxy-terminal segment of this open reading frame. Presence of a nonsense codon within the duplicated sequence suggested that it does not encode a functional product. Disruption of the duplicated sequence within the yeast genome provided a more critical test for function. The absence of any detectable phenotype for this disruption confirms that the sequence should be considered a pseudogene. The marker inserted to disrupt the sequence also served to map the duplication and to establish that it is not genetically linked to CDC4. The structural features determined suggest evolutionary relationships between these genes as well as between the CDC4 product and other proteins.

Base Sequence

Yeast gene required for spindle pole body duplication: homology of its product with Ca2+-binding proteins.

Saccharomyces cerevisiae strains bearing temperature-sensitive alleles of the cell division cycle gene CDC31 are specifically defective in duplication of the spindle pole body, the microtubule-organizing center of yeast. To define the function encoded by CDC31 more fully, we have isolated genomic clones of the gene by selection for complementation of a temperature-sensitive allele. The locus from which the clone was derived was marked by integration of a nutritional marker and found by meiotic mapping to cosegregate with CDC31. The polypeptide sequence of the open reading frame in the CDC31 gene was determined and compared with the sequences of other known proteins. This revealed significant homology with the calmodulins and other members of the Ca2+-binding protein family. On the basis of comparison with these related proteins, it is evident that the CDC31 gene product has at least two binding sites for Ca2+ and is also homologous with other regions of the calmodulin sequence. We propose that Ca2+ fluxes within the yeast cell play a key role in spindle pole body duplication and consequently in the organization of the microtubule arrays.

Amino Acid Sequence

Perceptual interference and hemispheric specialization.

Two experiments evaluated the effect of stimuli presented at fixation on the recognition of faces or random shapes presented to the left or right visual half-field (VF). Increasing the processing demands of the center stimulus produced a large, linear decrease in recognition from both VFs for both faces and shapes. Recognition of random shapes was decreased more in the right visual field by center digits and in the left VF by center faces and shapes. In addition, interference was found between the VF faces and the center digits to the left of fixation. It was concluded that differences in the processing capacity of the two hemispheres are a function of the verbal-nonverbal nature of the stimuli at a later stage in processing but that the two hemispheres may also differ along other perceptual dimensions at an earlier stage of visual recognition.

Attention

Enhanced gene conversion and postmeiotic segregation in pachytene-arrested Saccharomyces cerevisiae.

Previous study has demonstrated that incubation of yeast cells of strain AP-1 in sporulation medium at 36 degrees permits them to begin meiosis but that they become arrested at pachytene and undergo enhanced intragenic recombination between ade2 heteroalleles. Tetrad analysis was undertaken to characterize the altered program of meiotic recombination more widely. In one set of experiments, pachytene-arrested cells were permitted to resume sporulation upon transfer to the permissive temperature. In the resulting asci, both postmeiotic segregation and gene conversion were increased several-fold at a number of loci relative to unarrested controls, whereas reciprocal recombination increased two- to threefold. Another set of experiments analyzed the genetic consequences of inducing the pachytene-arrested cells to revert directly to mitotic growth without completion of meiosis. The appearance of homozygous sectors from heterozygous markers revealed that these cells had become committed to appreciable recombination but that reciprocal exchange was less frequent than in normal asci. Taken together, the data indicate that pachytene arrest rendered the cells committed to enhanced recombination upon resumption of sporulation but that most of the crossing over did not occur until release from the arrest.--The genetic basis of pachytene arrest by AP-1 was investigated by mating each of its parents with progeny of strain Y55, which is able to sporulate at 36 degrees. Both of these diploids sporulated at 36 degrees, and asci from the one studied further exhibited 2:2 segregation of the sporulation defect, indicating that pachytene arrest is dependent on a recessive, temperature-sensitive allele at a chromosomal locus.

Alleles

Separation of branched from linear DNA by two-dimensional gel electrophoresis.

A general method for separating branched DNA molecules, such as replication forks and recombination intermediates, from linear forms has been developed. Using as a model a stable X-shaped molecule constructed in vitro, it was found that this branched form migrated more slowly during agarose gel electrophoresis than did a linear form of the same mass. Higher agarose concentrations and higher electrophoretic voltages enhanced the extent of retardation. These properties provided the basis for an electrophoretic method of separating branched from linear molecules by variation of agarose concentration and voltage over two dimensions. In the first dimension, concentration and voltage were low; in the second, both parameters were increased, thereby forcing X-shaped molecules to migrate to positions distinct from a diagonal arc of linear molecules. In addition, two-dimensional electrophoresis was capable of separating X-shaped forms of different mass from each other, as well as from linear molecules.

Chemical Phenomena