Biomedical subjects

B E Reilly

Publications and source records attributed to B E Reilly.

At least 19 recordsLinked to original sources

PubMed1997

Growth dynamics in a natural biofilm and its impact on oral disease management.

Measurements of the microbial growth dynamics in natural biofilm communities are almost non-existent. In a recent study, the biofilm formation on teeth was examined. A previously unknown active period of bacterial division occurred at a certain density of plaque bacteria on tooth enamel. The density-dependent cell-division phase of plaque formation contributed 90% of the biomass in the first 24 hrs of plaque formation. This suggested that growth was induced by the bacteria. In vitro assays were developed for rapid evaluation of the growth of surface-linked bacteria by the measurement of cellular components associated with growth on a per cell per time basis. Cell-free supernatants (termed START) of media in contact with bacteria were assayed for their effects on DNA synthesis and other cellular components associated with growth. START was found to increase the incorporation of [3H-methyl]-thymidine on a per cell per time basis, when compared with media not in contact with bacteria. Additional in vivo studies and in situ-based models of complex biofilms are needed if all of the mechanisms involved in the rapid accumulation of biofilm bacteria on teeth and other surfaces are to be understood.

Amino Acids↗

PubMed1996

Adherence, accumulation, and cell division of a natural adherent bacterial population.

Developing dental bacterial plaques formed in vivo on enamel surfaces were examined in specimens from 18 adult volunteers during the first day of plaque formation. An intraoral model placing enamel pieces onto teeth was used to study bacterial plaque populations developing naturally to various cell densities per square millimeter of surface area of the enamel (W. F. Liljemark, C. G. Bloomquist, C. L. Bandt, B. L. Philstrom, J. E. Hinrichs, and L. F. Wolff, Oral Microbiol. Immunol. 8:5-15, 1993). Radiolabeled nucleoside incorporation was used to measure DNA synthesis concurrent with the taking of standard viable cell counts of the plaque samples. Results showed that in vivo plaque formation began with the rapid adherence of bacteria until ca. 12 to 32% of the enamel's salivary pellicle was saturated (ca. 2.5 x 10(5) to 6.3 x 10(5) cells per mm2). The pioneer adherent species were predominantly those of the "sanguis streptococci." At the above-noted density, the bacteria present on the salivary pellicle incorporated low levels of radiolabeled nucleoside per viable cell. As bacterial numbers reached densities between 8.0 x 10(5) and 2.0 x 10(6) cells per mm2, there was a small increase in the incorporation of radiolabeled nucleosides per cell. At 2.5 x 10(6) to 4.0 x 10(6) cells per mm2 of enamel surface, there was a marked increase in the incorporation of radiolabeled nucleosides per cell which appeared to be cell-density dependent. The predominant species group in developing dental plaque films during density-dependent growth was the sanguis streptococci; however, most other species present showed similar patterns of increased DNA synthesis as the density noted above approached 2.5 x 10(6) to 4.0 x 10(6) cells per mm2.

Actinomyces↗

PubMed1993

Bacillus subtilis mutants defective in bacteriophage phi 29 head assembly.

Virus assembly mutants of asporogenous Bacillus subtilis defective in bacteriophage phi 29 head assembly were detected by the use of antibodies that reacted strongly with the free dodecameric phi 29 portal vertex composed of gene product 10 (gp10) but weakly with the portal vertex assembled into proheads or phage. Phage adsorption and the synthesis of phage proteins, DNA-gene product 3, and prohead RNA were normal in these mutants, but prohead and phage production was greatly reduced. The assembly defect was transferred to competent B. subtilis by transformation and transduction. PBS1 transduction showed that the vam locus was linked to Tn917 located at 317 degrees on the B. subtilis chromosome.

Bacillus Phages↗

PubMed1990

Phylogenetic analysis and secondary structure of the Bacillus subtilis bacteriophage RNA required for DNA packaging.

An unusual RNA molecule encoded by the Bacillus subtilis bacteriophage phi 29 is a structural component of the viral prohead and is required for the ATP-dependent packaging of DNA. Here we report a model of secondary structure for this prohead RNA developed from a phylogenetic analysis of the primary sequences of prohead RNAs of related phages. Twenty-nine phages related to phi 29 were found to produce prohead RNAs. These RNAs were analyzed by their ability to replace phi 29 RNA in in vitro phage assembly, by Northern blot hybridization with a probe complementary to phi 29 RNA, and by partial and complete sequence analyses. These analyses revealed four quite different sequences ranging in length from 161 to 174 residues. The secondary structure deduced from these sequences, in agreement with earlier observations, indicated that prohead RNA is organized into two domains. The larger 5'-domain (Domain I) is composed of 113-117 residues and contains four helices. Three of these helices appear to be organized into a central stem that is interrupted by two unpaired loops and the fourth helix and loop. The smaller 3'-domain (Domain II) is composed of 40-44 residues and consists of two helices. Domains I and II are separated by 8-13 unpaired residues. Nuclease cleavage occurs readily in this single-stranded joining region, and this cleavage allows the subsequent separation of the two RNA domains. The separated Domain I is fully active in DNA packaging in vitro. The functional significance and biological role of Domain II are unknown. The phylogenetic secondary structure model provides a basis for further analysis of the role of this RNA in bacteriophage morphogenesis.

Bacillus subtilis↗

PubMed1985

Morphogenesis of bacteriophage phi 29 of Bacillus subtilis: prohead restoration for DNA-gp3 packaging and assembly.

The DNA-protein complex DNA-gp3 of phi 29 is efficiently packaged into purified proheads with the aid of plasmid-derived gp16. The filled heads can be assembled to phage by addition of an extract providing the products for neck-tail assembly (Bjornsti et al., J. Virol. 50:766-772, 1984). However, purified proheads lost their competence to package DNA-gp3 upon storage for 2 months at 4 degrees C. Competence was restored by complementation with extracts of certain mutant-infected cells, and these experiments demonstrated that late proteins were not involved; restoration obtained with 4-8-14--infected cells was indistinguishable from that obtained with 7-8-14--infected cells. 2-8-14- and 3-8-14- extracts restored about one-third of the capacity to package exogenous DNA-gp3. A 1-8-14- extracts restored activity to package 20.6% of the DNA-gp3 added, but phage were not produced.

Bacillus subtilis↗

PubMed1984

Bacteriophage phi 29 proteins required for in vitro DNA-gp3 packaging.

In vitro assembly of bacteriophage phi 29 in crude extracts involves efficient packaging of a DNA-protein complex (DNA- gp3 ) into a prohead with the aid of the gene 16 product ( gp16 ) and subsequent assembly of neck and tail proteins ( Bjornsti et al., J. Virol. 41:508-517, 1982; Bjornsti et al., J. Virol. 45:383-396, 1983; Bjornsti et al., Proc. Natl. Acad. Sci. U.S.A. 78:5861-5865, 1981). To define the viral proteins required for the DNA- gp3 encapsidation phase, we purified biologically active proheads and DNA- gp3 and constructed a chimeric plasmid, pUM101 , which contained and expressed gene 16 of phi 29 and no other viral genes. The plasmid-specified gp16 was both necessary and sufficient to package 24% of the DNA- gp3 added to the purified proheads , and the DNA-filled heads so produced were efficiently complemented to infectious phage by the addition of neck and tail proteins. Purified proheads and DNA- gp3 gave linear dose-response curves with slopes of approximately 1; in contrast, a 4-fold dilution of gp16 resulted in a 1,000-fold reduction of phi 29, suggesting a requirement for multiple copies of this protein.

Bacillus subtilis↗

PubMed1983

Morphogenesis of bacteriophage phi 29 of Bacillus subtilis: oriented and quantized in vitro packaging of DNA protein gp3.

The assembly of phage phi 29 occurs by a single pathway, and the DNA protein (DNA-gp3) of "packaging intermediates" can be obtained after DNase I interruption of in vitro complementation. A broad spectrum of DNA molecules of variable length was isolated from DNase I-treated proheads. Restriction endonuclease EcoRI digestion and electrophoretic analysis of these DNA molecules suggested that DNA-gp3 packaging was oriented with respect to the physical map and was a complex process. Proteinase K-treated exogenous DNA was not packaged. When exogenous DNA-gp3 was predigested with the restriction endonucleases BstEII. EcoRI, HpaI, and HpaII, the left-end fragments, ranging in size from 8 to 0.9 megadaltons, were selectively and efficiently packaged. During in vivo and in vitro assembly, DNA-gp3 is packaged into proheads, the "core-scaffolding" protein gp7 exits from the particles, and the DNA-filled heads assume the angular morphology of phage phi 29. The packaging of a 4.1-megadalton DNA-gp3 left-end fragment (one third of the genome) resulted in the exit of gp7 and the transition to angularity.

Bacillus subtilis↗

PubMed1982

Morphogenesis of bacteriophage phi 29 of Bacillus subtilis: DNA-gp3 intermediate in in vivo and in vitro assembly.

The assembly of phage phi 29 occurs by a single pathway, and DNA-protein (DNA-gp3) has been shown to be an intermediate on the assembly pathway by a highly efficient in vitro complementation. At 30 degrees C, about one-half of the viral DNA synthesized was assembled into mature phage, and the absolute plating efficiency of phi 29 approached unity. DNA packaging at 45 degrees C was comparable to that at 30 degrees C, but the burst size was reduced by one-third. When cells infected with mutant ts3(132) at 30 degrees C to permit DNA synthesis were shifted to 45 degrees C before phage assembly, DNA synthesis ceased and no phage were produced. However, a variable amount of DNA packaging occurred. Superinfection by wild-type phage reinitiated ts3(132) DNA synthesis at 45 degrees C, and if native gp3 was covalently linked to this DNA during superinfection replication, it was effectively packaged and assembled. Treatment of the DNA-gp3 complex with trypsin prevented in vitro maturation of phi 29, although substantial DNA packaging occurred. A functional gp3 linked to the 5' termini of phi 29 DNA is a requirement for effective phage assembly in vivo and in vitro.

Bacillus subtilis↗

PubMed1981

In vitro assembly of the Bacillus subtilis bacteriophage phi 29.

In vitro assembly of the Bacillus subtilis bacteriophage phi 29 that approaches the efficiency of assembly in vivo has been demonstrated. Proheads, DNA, and gene 16 product (gp16) were essential for DNA encapsidation, and the average yield in extracts was 180 phage per prohead donor cell. The in vitro maturation was very similar to in vivo assembly in terms of yield, intermediates, and abortive structures. More that 30% of the proheads in the extract were converted to phage, and about 20% of DNA--protein extracted from phage could be repackaged. In vitro assembly was blocked by the addition of DNase I, EDTA, pyrophosphatase, or the ATP analogues adenosine 5'-[alpha, beta-methylene]triphosphate and adenosine 5'-[beta, gamma-methylene]triphosphate. Less than 1% of the proheads isolated in sucrose gradients can accept DNA--protein in packaging in vitro.

Bacillus subtilis↗

PubMed1977

Morphogenesis of bacteriophage phi 29 of Bacillus subtilis: mapping and functional analysis of the head fiber gene.

A set of mutants of Bacillus subtilis bacteriophage phi29 unable to synthesize the head fiber protein has been identified by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and autoradiography. Infectious phage are produced during restrictive infection. We have focused on mutant sus 8.5(900) because the mutation is suppressible by both the su(+3) and su(+44) hosts, and it can be mapped by three- and four-factor crosses. After restrictive infection with mutant sus 8.5(900), a fragment about 70% of the size of the normal fiber is produced as well as particles that are fast-sedimenting in sucrose gradients relative to phi29(+). These particles have the buoyant density of particles with the fibers removed and have the absolute plating efficiency of phi29(+). Fiber protein is absent from prohead as well as virion. A second set of mutants produces fiber protein with a slightly altered electrophoretic mobility. This type of fiber protein is either present or absent on both prohead and virion. A third class of mutants, typified by 914, produces a "normal" fiber, but a major head protein of altered electrophoretic mobility. After infection by this mutant, the fiber is absent from both prohead and virion, and the biological and physical properties of the 914(-) particle are similar to those of particles produced after infection of the su(-) host by sus8.5(900). These observations suggest that the head fiber is not an essential component of the prohead or virion and that the assembly process is efficient in the absence of fiber protein. Three- and four-factor genetic crosses have established the order sus8(769)-8(914)-sus8.5(900)-sus9(756) and indicate that cistrons 8 and 8.5 code for the major head protein and head fiber protein, respectively.

Bacillus subtilis↗

PubMed1976

Genetic analysis of bacteriophage phi 29 of Bacillus subtilis: integration and mapping of reference mutants of two collections.

Reference mutants of Bacillus subtilis phage phi 29 of the Madrid and Minneapolis collections were employed to construct a genetic map. Suppressor-sensitive and temperature-sensitive mutants were assigned to 17 cistrons by quantitative complementation. Three-factor crosses were used to assign an unambiguous order for the 17 cistrons. Recombination frequencies determined by two-factor crosses were used to construct a linear genetic map of 24.4 recombination units. The genes were numbered sequentially from left to right (1 to 17) according to their relative map position.

Bacillus subtilis↗

PubMed1976

Analysis of gene function of bacteriophage phi 29 of Bacillus subtilis: identification of cistrons essential for viral assembly.

Restrictive infection of Bacillus subtilis by suppressor-sensitive (sus) mutants of phi 29 has been used to search for cistrons that function in viral assembly. The products of cistrons 7, 9, 10, and 16 are necessary for head morphogenesis. The neck upper collar protein P10 and the tail protein P9 must be present for DNA packaging to occur. The protein P7 must be present for phage-related particles to form. A prohead-like particle has been isolated during 16-restrictive infection. The particle is composed of the proteins Hd, P10, F, and P7. P16 must function for DNA-filled particles to accumulate. A DNA-containing particle produced in the absence of the cistron 11 product may be an intermediate in the phi 29 assembly pathway. The protein P13 interacts with P9 and P11 to form a stable DNA-filled particle. The products of cistrons 2 and 3 are essential for viral DNA synthesis, and in their absence virus-related particles are not detected.

Bacillus subtilis↗

PubMed1976

Morphogenesis of bacteriophage phi 29 of Bacillus subtilis: preliminary isolation and characterization of intermediate particles of the assembly pathway.

Three classes of particles have been identified in restrictive phi 29 suppressor-sensitive (sus) mutant infections of Bacillus subtilis, including DNA-containing heads or phage, prohead, and empty heads. Pulse-chase labeling experiments indicate that the prohead, the first particle assembled in 14-infected cells, is converted to DNA-filled heads and phi 29. In addition to the proteins Hd, P10, and F found in mature phi 29, the prohead contains a "core" protein P7 that exits as the prohead matures and appears to recycle during subsequent rounds of prohead assembly. Prohead-like structures accumulate in UV-irradiated cells and are present in restrictive infections with sus mutants of cistrons 9 and 16. Empty heads are observed only when infection results in the formation of DNA-containing particles; this and other evidence indicates that the empty heads are probably not true intermediates. Phage phi 29 assembly apparently occurs by a single pathway in which neck and tail components interact to stabilize the completed DNA-containing head.

Bacillus subtilis↗

PubMed1975

Genetic analysis of bacteriophage phi29 of Bacillus subtilis: mapping of the cistrons coding for structural proteins.

Four phage phi29 suppressor-sensitive mutants of cistron O have been examined for production of 14C-labeled viral-specific proteins in restrictive infections of Bacillus subtilis and fail to produce the protein of the viral neck lower collar. Cistrons O and F have been placed on the genetic map, containing 12 cistrons, by three-factor crosses. The phenotypes of five cistron J mutants have been analyzed by sodium dodecyl sulfate gel electrophoresis and autoradiography, and in three instances fragments of the normal polypeptide were detected. Three factor crosses with these mutants and a virus with a clear plaque phenotype were used to initiate the mapping of cistron J and the determination of the orientation of transcription in this map region.

Bacillus subtilis↗

PubMed1975

Morphogenesis of bacteriophage phi29 of Bacillus subtilis: cleavage and assembly of the neck appendage protein.

Each of the 12 neck appendages of the Bacillus subtilis bacteriophage phi29 consists of a single protein molecule with a molecular weight of about 75,000, and on the mature virion the appendages are assembled to the lower of two collars. The appendage protein is cleaved from a precursor protein, P(J), with a molecular weight of about 88,000. This cleavage is independent of neck assembly, occurring during infection by mutants that cannot synthesize the proteins of the upper and lower collars of the neck. The cleaved form of the appendage protein is efficiently complemented in vitro to particles lacking appendages. Thus, cleavage of the appendage precursor protein apparently does not occur in situ on the maturing virus.

Bacillus subtilis↗

PubMed1974

Analysis of bacteriophage phi 29 gene function: protein synthesis in suppressor-sensitive mutant infection of Bacillus subtilis.

Phage phi29 suppressor-sensitive (sus) mutants of 14 cistrons have been examined for production of (14)C-labeled viral-specific proteins in restrictive infections of Bacillus subtilis. Proteins specified by four cistrons (H, J, L, and N) have been resolved and identified by sodium dodecyl sulfate gel electrophoresis and autoradiography, and fragments of the normal polypeptides were detected. Mutants of six cistrons (C, D, E, F, I, and M) demonstrated two or more missing bands in the gel profiles, and thus some of these gene products may have regulatory functions. Mutation was detected in at least five genes coding for low-molecular-weight proteins, but a conditionally lethal mutant in only one of these genes has been isolated. Preliminary evidence that a precursor protein is cleaved to generate the neck appendage structural protein and a low-molecular-weight product has been obtained.

Amino Acids↗

PubMed1973

Selective replication of bacteriophage phi29 deoxyribonucleic acid in 6-(p-hydroxyphenylazo)-uracil-treated Bacillus subtilis.

Phage phi29 deoxyribonucleic acid (DNA) replicated under conditions where semiconservative DNA production in Bacillus subtilis host cells was blocked with 6-(p-hydroxyphenylazo)-uracil (HPUra). The time of initiation of phi29 DNA replication was not affected by HPUra, and normal quantities of viable phage were produced in the presence of the inhibitor. Studies with conditional lethal mutants of phage phi29 demonstrated the usefulness of HPUra for detection of viral-specific DNA production.

Azo Compounds↗

PubMed1973

Genetic study of suppressor-sensitive mutants of the Bacillus subtilis bacteriophage phi 29.

With bacteriophage phi29 of Bacillus subtilis 133, suppressor-sensitive (sus) hydroxylamine mutants have been isolated. Intracistronic and intercistronic quantitative complementation placed the mutants in 13 cistrons, and three-factor crosses have been used to assign an unambiguous order for 10 cistrons. Recombination frequencies have been presented for several regions of the genome to facilitate comparison of the sus system with the previously published temperature-sensitive mapping systems.

Bacillus subtilis↗