PubMed Health⌕ Search

Biomedical subjects

B Hitzmann

Publications and source records attributed to B Hitzmann.

8 recordsLinked to original sources
PubMed2005

Two-dimensional fluorescence spectroscopy: a novel approach for controlling fed-batch cultivations.

In industrial fed-batch cultivations it is often necessary to control substrate concentrations at a low level to prevent the production of overflow metabolites and thus optimize the biomass yield. A new method for on-line monitoring and fed-batch control based on fluorescence measurements has been developed. Via instantaneous in situ measurements and multivariate data analysis a chemometric model has been established, which enables the rapid detection of ethanol production at aerobic Saccharomyces cerevisiae fed-batch cultivations. The glucose feed rate is controlled by predicting the metabolic state directly from the fluorescence intensities. Thus, ethanol production could be avoided completely while increasing the biomass yield accordingly. The robust instrumentation is suitable for industrial applications.

Aerobiosis↗
PubMed2003

Optimization of the extracellular production of a bacterial phytase with Escherichia coli by using different fed-batch fermentation strategies.

The extracellular production of Escherichia coli phytase was studied in fed-batch fermentations. Two different feeding strategies were compared: control by keeping the glucose concentration constant, and control by keeping a low constant oxygen level in the medium. For the feeding control based on glucose concentration, a recently developed rapid glucose controlling system was tested for the first time in bacterial cultivations and used to establish the fermentative production of extracellular phytase with E. coli. High activity levels (120 U ml(-1)) at short cultivation times (14 h) were obtained. Even higher activity levels - albeit at longer cultivation times - were reached by applying a feeding control, the main characteristic of which was a constant low oxygen concentration. The optimum oxygen level for the production of phytase was in the range of 5-10% saturation.

6-Phytase↗
PubMed2003

Chemometric modelling based on 2D-fluorescence spectra without a calibration measurement.

MOTIVATION: 2D fluorescence spectra provide information from intracellular compounds. Fluorophores like trytophan, tyrosine and phenylalanin as well as NADH and flavins make the corresponding measurement systems very important for bioprocess supervision and control. The evaluation is usually based on chemometric modelling using for their calibration procedure off-line measurements of the desired process variables. Due to the data driven approach lots of off-line measurements are required. Here a methodology is presented, which enables to perform a calibration procedure of chemometric models without any further measurement. RESULTS: The necessary information for the calibration procedure is provided by means of the a priori knowledge about the process, i.e. a mathematical model, whose model parameters are estimated during the calibration procedure, as well as the fact that the substrate should be consumed at the end of the process run. The new methodology for chemometric calibration is applied for a batch cultivation of aerobically grown S. cerevisiae on the glucose Schatzmann medium. As will be presented the chemometric models, which are determined by this method, can be used for prediction during new process runs. AVAILABILITY: The MATHLAB routine is free available on request from the authors.

Algorithms↗
PubMed2002

In-situ-fluorescence-probes: a useful tool for non-invasive bioprocess monitoring.

Optical sensors appear to be very promising for different applications in modern biotechnology. They offer the possibility to interface all the well known optical analysis techniques to bioprocesses via fiber optical cables. Thus, high sophisticated and sensitive optical analysis techniques can be coupled to a bioprocess via these light signal transporting fibers. A wide variety of sensor types for application in biotechnology has been described. Normally these sensors are non-invasive and the response times are nearly instantaneous. In particular, the use of glass fiber technology makes these sensors small, robust and reduces their costs.

Biomass↗
PubMed1991

Cultivation of recombinant E. coli and production of fusion protein in 60-1 bubble column and airlift tower loop reactors.

E. coli K12 with multicopy plasmid (lambda PR-promoter and temperature-sensitive lambda cI 857 repressor) was cultivated in 60-l bubble column and airlift tower loop reactors. The medium composition, cell concentration, and intracellulary enzyme activity were monitored on-line during batch, fed-batch, and continuous cultivations. The specific growth rates, cell mass yield coefficients, plasmid stabilities, productivities of the amount of active fusion protein (beta-galactosidase activity), concentrations and yields of acetic acid, and volumetric oxygen transfer coefficient were evaluated for different medium compositions and cultivation conditions. The enzyme activity was also monitored during the temperature induction. The results evaluated in the 60-l bubble column and airlift tower loop reactors are compared with those evaluated in a 1-1 stirred-tank reactor.

Bacterial Proteins↗
PubMed1991

On-line determination of intracellular beta-galactosidase activity in recombinant Escherichia coli using flow injection analysis (FIA).

A flow injection analysis (FIA) system was developed for the determination of cytoplasmic beta-galactosidase activity in recombinant Escherichia coli. The FIA system and its application for on-line monitoring of beta-galactosidase production during cultivation of recombinant E. coli in a 60-l airlift tower loop reactor is described. The results demonstrate that an FIA assay in conjunction with a cell disintegration step can be applied successfully for on-line monitoring of intracellular protein formation.

Colorimetry↗