B Lalere | PubMed Health

PubMed2006

An interlaboratory study to evaluate potential matrix reference materials for herbicides in water.

Matrix reference materials (MRM) are essential tools for the validation of analytical protocols. Nowadays, there are no such materials for the determination of herbicides in water. Pesticides stored in acetonitrile and stored on solid phase extraction (SPE) cartridges previously percolated with a water sample spiked with triazines and phenylureas have proven to be good candidates for reference materials because of their satisfactory stability under appropriate temperature conditions. To evaluate the behaviors of these materials containing pesticides and to be analyzed by liquid chromatography, a collaborative study including 15 laboratories has been organized. Observed reproducibility on candidate materials after the removal of extreme results was 16.1% for the vials with pesticides in acetonitrile (at around 0.125 mg/L) directly analyzed, 29.2% for a water sample spiked with the pesticides (at around 0.5 microg/L) analyzed after preconcentration on a cartridge and 26.7% for the cartridges previously percolated with a water containing the pesticides (250 mL at around 0.5 microg/L for each pesticide) analyzed after elution. Such dispersion values are quite compatible with the requirement of a further certification for such materials.

Acetonitriles↗

PubMed2003

Determination of tributyltin in marine sediment: Comité Consultatif pour la Quantité de Matière (CCQM) pilot study P-18 international intercomparison.

The capabilities of National Metrology Institutes (NMIs-those which are members of the Comité Consultatif pour la Quantité de Matière (CCQM)of the CIPM) and selected outside "expert" laboratories to quantitate (C(4)H(9))(3)Sn(+) (TBT) in a prepared marine sediment were assessed. This exercise was sanctioned by the 7th CCQM meeting, April 4-6, 2001, as an activity of the Inorganic Analysis Working Group and was jointly piloted by the Institute for National Measurement Standards of the National Research Council of Canada (NRC) and the Laboratory of the Government Chemist (LGC), UK. A total of 11 laboratories submitted results (7 NMIs, and 4 external labs). Two external laboratories utilized a standard calibration approach based on a natural abundance TBT standard, whereas all NMIs relied upon isotope dilution mass spectrometry for quantitation. For this purpose, a species specific (117)Sn-enriched TBT standard was supplied by the LGC. No sample preparation methodology was prescribed by the piloting laboratories and, by consequence, a variety of approaches was adopted by the participants, including mechanical shaking, sonication, accelerated solvent extraction, microwave assisted extraction and heating in combination with Grignard derivatization, ethylation and direct sampling. Detection techniques included ICP-MS (with GC and HPLC sample introduction), GC-MS, GC-AED and GC-FPD. Recovery of TBT from a control standard (NRCC CRM PACS-2 marine sediment) averaged 93.5+/-2.4% ( n=14). Results for the pilot material averaged 0.680+/-0.015 micro mol kg(-1) ( n=14; 80.7+/-1.8 micro g kg(-1)) with a median value of 0.676 micro mol kg(-1). Overall, performance was substantially better than state-of-the-art expectations and the satisfactory agreement amongst participants permitted scheduling of a follow-up Key comparison for TBT (K-28), a Pilot intercomparison for DBT (P-43), and certification of the test sediment for TBT content and its release as a new Certified Reference Material (HIPA-1) with a TBT content of 0.679+/-0.089 micro mol kg(-1) (expanded uncertainty, k=2, as Sn) (80.5+/-10.6 micro g kg(-1)).

Journal Article↗