Measuring the conformational stability of a protein by hydrogen exchange.
Explore the source record for details and available documents.
Hydrogen↗
Biomedical subjects
B M Huyghues-Despointes
Publications and source records attributed to B M Huyghues-Despointes.
Hydrogen-exchange stabilities of RNase T1 and variants with buried and solvent-exposed Ala --> Gly mutations in the helix.
Hydrogen-exchange rates were measured for RNase T1 and three variants with Ala --> Gly substitutions at a solvent-exposed (residue 21) and a buried (residue 23) position in the helix: A21G, G23A, and A21G + G23A. These results were used to measure the stabilities of the proteins. The hydrogen-exchange stabilities (DeltaG(HX)) for the most stable residues in each variant agree with the equilibrium conformational stability measured by urea denaturation (DeltaG(U)), if the effects of D(2)O and proline isomerization are included [Huyghues-Despointes, B. M. P., Scholtz, J. M., and Pace, C. N. (1999) Nat. Struct. Biol. 6, 210-212]. These residues also show similar changes in DeltaG(HX) upon Ala --> Gly mutations (DeltaDeltaG(HX)) as compared to equilibrium measurements (DeltaDeltaG(U)), indicating that the most stable residues are exchanging from the globally unfolded ensemble. Alanine is stabilizing compared to glycine by 1 kcal/mol at a solvent-exposed site 21 as seen by other methods for the RNase T1 protein and peptide helix [Myers, J. K., Pace, C. N., and Scholtz, J. M. (1997) Proc. Natl. Acad. Sci. U.S.A. 94, 3833-2837], while it is destabilizing at the buried site 23 by the same amount. For the A21G variant, only local NMR chemical shift perturbations are observed compared to RNase T1. For the G23A variant, large chemical shift changes are seen throughout the sequence, although X-ray crystal structures of the variant and RNase T1 are nearly superimposable. Ala --> Gly mutations in the helix of RNase T1 at both helical positions alter the native-state hydrogen-exchange stabilities of residues throughout the sequence.
Alanine↗
Protein conformational stabilities can be determined from hydrogen exchange rates.
Explore the source record for details and available documents.
Deuterium↗
Increasing protein stability by altering long-range coulombic interactions.
It is difficult to increase protein stability by adding hydrogen bonds or burying nonpolar surface. The results described here show that reversing the charge on a side chain on the surface of a protein is a useful way of increasing stability. Ribonuclease T1 is an acidic protein with a pI approximately 3.5 and a net charge of approximately -6 at pH 7. The side chain of Asp49 is hyperexposed, not hydrogen bonded, and 8 A from the nearest charged group. The stability of Asp49Ala is 0.5 kcal/mol greater than wild-type at pH 7 and 0.4 kcal/mol less at pH 2.5. The stability of Asp49His is 1.1 kcal/mol greater than wild-type at pH 6, where the histidine 49 side chain (pKa = 7.2) is positively charged. Similar results were obtained with ribonuclease Sa where Asp25Lys is 0.9 kcal/mol and Glu74Lys is 1.1 kcal/mol more stable than the wild-type enzyme. These results suggest that protein stability can be increased by improving the coulombic interactions among charged groups on the protein surface. In addition, the stability of RNase T1 decreases as more hydrophobic aromatic residues are substituted for Ala49, indicating a reverse hydrophobic effect.
Aspartic Acid↗
Ion-pair and charged hydrogen-bond interactions between histidine and aspartate in a peptide helix.
The effect on helix stability of placing a single pair of His-Asp or Asp-His residues, spaced (i, i + 3), (i, i + 4), or (i, i + 5), in an alanine-based peptide has been determined. The peptides have identical amino acid compositions, intrinsic helix propensities, and closely similar charge-helix dipole interactions, but they have different side chain interactions. Their helix contents are measured by circular dichroism over the pH range of 2-9, and the strength of a particular side chain interaction is determined from the increase in helix content over the reference peptide with the (i, i + 5) spacing. Side chain interactions are found for both the (i, i + 3) and (i, i + 4) spacings but only in the His-Asp orientation. Charged hydrogen-bond interactions occur at extreme pH values, and they are almost as strong as the ion-pair interactions at pH 5.5; but only the (i, i + 4) His-Asp peptide forms a strong hydrogen bond at pH 2, and only the (i, i + 3) peptide forms a strong hydrogen bond at pH 8.5. The ion-pair interactions are not screened effectively by 1 M NaCl, and hydrogen bonds probably account for most of their strength.
Amino Acid Sequence↗
Measuring the strength of side-chain hydrogen bonds in peptide helices: the Gln.Asp (i, i + 4) interaction.
Whether hydrogen bonds between side chains are energetically significant in proteins and peptides has been controversial. A method is given here for measuring these interactions in peptide helices by comparing the helix contents of peptides with 1, 2, or 3 interactions. Results are given for the glutamine--aspartate (i, i + 4) hydrogen-bond interaction. The Gibbs energy of the interaction is -1.0 kcal/mol when aspartate is charged and -0.4(4) kcal/mol when it is protonated. Magnetic resonance experiments show that the aspartate carboxylate group interacts specifically with the trans amide proton (HE) of glutamine. The interaction is observed only when the glutamine residue is N-terminal to the aspartate and when the spacing is (i, i + 4). The same stereochemistry is found in protein structures, where the (i, i + 4) glutamine-aspartate interaction occurs much more frequently than other possible arrangements.
Amino Acid Sequence↗
Helical peptides with three pairs of Asp-Arg and Glu-Arg residues in different orientations and spacings.
The helix-stabilizing effects of repeating pairs of Asp-Arg and Glu-Arg residues have been characterized using a peptide system of the same design used earlier to study Glu-Lys (Marqusee, S. & Baldwin, R.L., 1987, Proc. Natl. Acad. Sci. USA 84, 8898-8902) and Asp-Lys ion pairs (Marqusee, S. & Baldwin, R.L., 1990, In Protein Folding [Gierasch, L.M. & King, J., Eds.], pp. 85-94, AAAS, Washington, D.C.). The consequences of breaking ion pair and charge-helix dipole interactions by titration to pH 2 have been compared with the results of screening these interactions with NaCl at pH 7.0 and pH 2.5. The four peptides in each set contain three pairs of acidic (A) and basic (B) residues spaced either i, i + 4 or i, i + 3 apart. In one peptide of each kind the pairwise order of residues is AB, with the charges oriented favorably to the helix macrodipole, and in the other peptide the order is BA. The results are as follows: (1) Remarkably, both Asp-Arg and Glu-Arg peptides show the same pattern of helix stabilization at pH 7.0 found earlier for Glu-Lys and Asp-Lys peptides: i + 4 AB > i + 4 BA approximately i + 3 AB > i + 3 BA. (2) The ion pairs and charge-helix dipole interactions cannot be cleanly separated, but the results suggest that both interactions make important contributions to helix stability.(ABSTRACT TRUNCATED AT 250 WORDS)
Amino Acid Sequence↗
Effect of a single aspartate on helix stability at different positions in a neutral alanine-based peptide.
A single aspartate residue has been placed at various positions in individual peptides for which the alanine-based reference peptide is electrically neutral, and the helix contents of the peptides have been measured by circular dichroism. The dependence of peptide helix content on aspartate position has been used to determine the helix propensity (s-value). Both the charged (Asp-) and uncharged (Asp0) forms of the aspartate residue are strong helix breakers and have identical s-values of 0.29 at 0 degree C. The interaction of Asp- with the helix dipole affects helix stability at positions throughout the helix, not only near the N-terminus, where the interaction is helix stabilizing, and the C-terminus, where it is destabilizing. Comparison of the helix contents at acidic pH (Asp0) and at neutral pH (Asp-) shows that the charge-helix dipole interaction is screened slowly with increasing NaCl concentration, and screening is not complete even at 4.8 M NaCl. Lastly, a helix-stabilizing hydrogen-bond interaction between glutamine and aspartate (spacing i, i + 4) has been found. This side-chain interaction is specific for both the orientation and spacing of the glutamine and aspartate residues and is resistant to screening by NaCl.
Alanine↗
Stabilities of disulfide bond intermediates in the folding of apamin.
Apamin is an 18-residue bee venom peptide with the sequence CNCKAPETALCARRCQQH-amide and contains 2 disulfide bonds connecting C-1 to C-11 and C-3 to C-15. In the folding of reduced, unfolded apamin to native apamin with two disulfide bonds, the one-disulfide folding intermediate states are not populated to significant levels. To study the properties of the one-disulfide intermediates, we have synthesized two peptide models to mimic the one-disulfide intermediates, Apa-1 and Apa-2, in which two cysteines in the sequence have been replaced by alanines. These peptides can form only one of the native disulfide bonds, C-1 to C-11 in the case of Apa-1 and C-3 to C-15 in the case of Apa-2. The stabilities of these disulfide bonds have been measured as a function of pH, concentration of urea, and temperature, in order to understand which contributions stabilize the disulfide-bonded structures. Using oxidized and reduced glutathione, the equilibrium constants for forming the disulfide bonds at 25 degrees C and pH 7.0 are 0.018 M for Apa-1 and 0.033 M for Apa-2 and show little dependence on pH or temperature. Both disulfide bonds are destabilized slightly (by approximately a factor of 2) between 0 and 8 M urea. Circular dichroism spectra indicate that although both Apa-1 and Apa-2 exhibit some structure, Apa-2 exhibits more than Apa-1. The results suggest that in the folding of apamin, the one-disulfide intermediate containing the C-3 to C-15 disulfide bond, as in Apa-2, is favored slightly. Secondary structure provides modest stabilization to this intermediate.
Amino Acid Sequence↗