PubMed Health⌕ Search

Biomedical subjects

B Oudega

Publications and source records attributed to B Oudega.

At least 73 records · Page 4Linked to original sources

Cloning, expression and release of native and mutant cloacin DF13 immunity protein.

The pCloDF13 encoded immunity protein gene was subcloned in the expression vector pINIIIA1 and several deletion, insertion and point mutations were constructed in the amino-terminal and carboxyl-terminal regions of the protein. The expression, stability, BRP-dependent export and protective capacity of the native and mutant immunity proteins were studied by SDS-PAGE, immunoblotting and an in vivo activity assay. In the absence of cloacin the unbound, native immunity protein was stable produced by E. coli cells and released after BRP induction. The expression of most of the mutant immunity proteins was strongly reduced and non of the proteins were found to be released. All mutations in the carboxyl-terminal region strongly affected expression of the proteins, probably by causing protein instability and proteolytic degradation. One of these mutant immunity proteins, with an insertion mutation in its carboxyl-terminal region, still caused an intermediate immunity of susceptible cells against extracellularly added cloacin DF13. Mutations in the amino-terminal region of the immunity protein had less effect on its expression and did not affect the protective capacity of the protein.

Amino Acid Sequence↗

Functioning of a hybrid BRP-beta-lactamase protein in the release of cloacin DF13 and lysis of Escherichia coli cells.

The gene encoding a hybrid BRP-Bla protein consisting of the pCloDF13 encoded BRP signal sequence, 25 of the 28 amino acid residues of the mature bacteriocin release protein (BRP) and the mature portion of beta-lactamase (Bla) was subcloned in the expression vector pEB112. A similar construct was made using a mutant gene encoding a BRP-Bla protein in which the cysteine residue at the +1 position was changed into a glycine residue. The expression, processing, functioning and subcellular localization of the 'wild-type' and mutant hybrid protein at high-level expression conditions were studied. The 'wild-type' BRP-Bla protein was mainly found in the outer membranes and possessed all the activities of the BRP itself; the protein was able to bring about the release of cloacin DF13 and caused apparent cell-lysis after high-level synthesis. The mutant hybrid protein was predominantly located in the inner membranes, was inactive in the release of cloacin DF13, but caused apparent cell-lysis only after strong induction.

Bacterial Outer Membrane Proteins↗

Detection and identification of FaeC as a minor component of K88 fibrillae of Escherichia coli.

A tribrid gene containing ompF, faeC, and lacZ sequences was constructed by subcloning a large central segment of the K88ab gene encoding the fibrillar subunit-like protein FaeC into the open reading frame expression vector pORF2. The resulting tribrid protein was isolated and used to raise antibodies against the FaeC protein. These antibodies were then used for the detection and subcellular localization of the FaeC protein in Escherichia coli harbouring the K88ab-encoding plasmid pFM205 or mutant derivatives. Immunoblotting of subcellular fractions and of purified fibrillae, and agglutination experiments using whole cells revealed that the FaeC protein is present in the periplasm and as a minor component in the K88ab fibrillae. FaeC was also detected in purified K88ac and K88ad fibrillae. Immunoelectron microscopy confirmed the presence of FaeC in K88ab fibrillae, particularly at the tips of the longer fibrillae.

Agglutination↗

pCloDF13-encoded bacteriocin release proteins with shortened carboxyl-terminal segments are lipid modified and processed and function in release of cloacin DF13 and apparent host cell lysis.

By oligonucleotide-directed mutagenesis, stop codon mutations were introduced at various sites in the pCloDF13-derived bacteriocin release protein (BRP) structural gene. The expression, lipid modification (incorporation of [3H]palmitate), and processing (in the presence and absence of globomycin) of the various carboxyl-terminal shortened BRPs were analyzed by a special electrophoresis system and immunoblotting with an antiserum raised against a synthetic BRP peptide, and their functioning with respect to release of cloacin DF13, lethality, and apparent host cell lysis were studied in Sup-, supF, and supP strains of Escherichia coli. All mutant BRPs were stably expressed, lipid modified, and processed by signal peptidase II, albeit with different efficiencies. The BRP signal peptide appeared to be extremely stable and accumulated in induced cells. Full induction of the mutant BRPs, including the shortest containing only 4 amino acid residues of the mature polypeptide, resulted in phospholipase A-dependent and Mg2+-suppressible apparent cell lysis. The extent of this lysis varied with the mutant BRP used. Induction of all mutant BRPs also prevented colony formation, which appeared to be phospholipase A independent. One shortened BRP, containing 20 amino acid residues of the mature polypeptide, was still able to bring about the release of cloacin DF13. The results indicated that the 8-amino-acid carboxyl-terminal segment of the BRP contains a strong antigenic determinant and that a small segment between amino acid residues 17 and 21, located in the carboxyl-terminal half of the BRP, is important for release of cloacin DF13. Either the stable signal peptide or the acylated amino-terminal BRP fragments (or both) are involved in host cell lysis and lethality.

Acylation↗

Alterations in the carboxy-terminal half of cloacin destabilize the protein and prevent its export by Escherichia coli.

Several overlapping carboxy-terminal and internal deletions were constructed in the cloacin structural gene. The expression, the binding of the cloacin DF13 immunity protein and the release into the culture medium of the mutant cloacin polypeptides were studied by immunoblotting and ELISAs. Minor alterations at the carboxy-terminal end of the cloacin did not affect protein expression, stability or release to a large extent, but larger carboxy-terminal deletions strongly destabilized the protein and no release was observed. The removal of a particular region within the carboxy-terminal portion of cloacin strongly destabilized the polypeptide and made it a target for proteolytic degradation. Binding of immunity protein did not affect stability and release of the mutant polypeptides. By using immunoelectron microscopy, the polypeptides that were not exported were located in the cytoplasm of producing cells. Large aggregates of these mutant polypeptides were not observed in the cytoplasm: the polypeptides were present in a soluble form.

Amino Acid Sequence↗

Effect of a mutation preventing lipid modification on localization of the pCloDF13-encoded bacteriocin release protein and on release of cloacin DF13.

The pCloDF13-encoded bacteriocin release protein (BRP; Mr 2,871) is essential for the translocation of cloacin DF13 across the cell envelope of producing Escherichia coli cells. Overproduction of this BRP provokes lysis (quasilysis) of cells. Construction and analysis of a hybrid BRP-beta-lactamase protein (BRP-Bla) demonstrated that the BRP contains a lipid modified cysteine residue at its amino terminus and is mainly located in the outer membrane. The significance of lipid modification for the localization and functioning of the BRP was investigated. Site-directed mutagenesis was used to substitute the cysteine residue for a glycine residue in the lipobox of the BRP and the BRP-Bla protein. The mutated BRP was unable to bring about the release of cloacin DF13 and could not provide the lysis (quasilysis) of host cells. However, the mutated BRP strongly inhibited the colony-forming ability of the cells, indicating that induction of the mutated protein still affected cell viability. In contrast to the wild-type BRP-Bla protein, the mutated BRP-Bla protein was mainly located in the cytoplasmic membrane, indicating that the mutation prevented the proper localization of the protein. The results indicated that lipid modification of the BRP is required for its localization and release of cloacin DF13, but not for its lethality to host cells.

Bacterial Proteins↗

Uncoupling of synthesis and release of cloacin DF13 and its immunity protein by Escherichia coli.

The synthesis of the bacteriocin cloacin DF13 and its release into the culture medium were genetically uncoupled by subcloning the gene encoding the bacteriocin release protein (BRP) from pCloDF13. The gene was cloned under the control of the IPTG-inducible lpp-lac promoter-operator system on the expression vector pINIIIA1, giving pJL1. A 4 kb DNA fragment of pJL1, containing the tandem lpp-lac promoter, the BRP gene and lacI (BRP cassette), was cloned into the pCloDF13 derivative plasmid pJN67, which encodes cloacin DF13 but not the release protein. Furthermore, the pCloDF13 immunity protein gene was subcloned downstream of the temperature-inducible PL promoter of the expression vector pPLc236, together with the BRP cassette. Growth, induction and excretion experiments with Escherichia coli cells harbouring the constructed plasmids revealed that: the BRP is the only pCloDF13-derived gene product responsible for the observed growth inhibition and apparent lysis of strongly induced cells. This growth inhibition and lysis can be prevented by Mg2+ ions added to the culture medium, and involves induction of phospholipase A activity. The expression of the BRP gene can be regulated by varying the IPTG concentration. A separately controlled and moderate induced BRP synthesis can be used to bring about the release of large amounts of cloacin DF13 under conditions that allow a strong induction of the bacteriocin and which do not result in lysis of cells. Preliminary results indicated that the BRP can stimulate the release of immunity protein in the absence of cloacin or cloacin fragments.

Bacterial Proteins↗

Primary structure and subcellular localization of two fimbrial subunit-like proteins involved in the biosynthesis of K99 fibrillae.

Analysis of the nucleotide sequence of the distal part of the fan gene cluster encoding the proteins involved in the biosynthesis of the fibrillar adhesin, K99, revealed the presence of two structural genes, fanG and fanH. The amino acid sequence of the gene products (FanG and FanH) showed significant homology to the amino acid sequence of the fibrillar subunit protein (FanC). Introduction of a site-specific frameshift mutation in fanG or fanH resulted in a simultaneous decrease in fibrillae production and adhesive capacity. Analysis of subcellular fractions showed that, in contrast to the K99 fibrillar subunit (FanC), both the FanH and the FanG protein were loosely associated with the outer membrane, possibly on the periplasmic side, but were not components of the fimbriae themselves.

Amino Acid Sequence↗

Modification, processing, and subcellular localization in Escherichia coli of the pCloDF13-encoded bacteriocin release protein fused to the mature portion of beta-lactamase.

A fusion between the pCloDF13-derived bacteriocin release protein and beta-lactamase was constructed to investigate the subcellular localization and posttranslational modification of the bacteriocin release protein in Escherichia coli. The signal sequence and 25 of the 28 amino acid residues of the mature bacteriocin release protein were fused to the mature portion of beta-lactamase. The hybrid protein (Mr, 31,588) was expressed in minicells and whole cells and possessed full beta-lactamase activity. Immunoblotting of subcellular fractions revealed that the hybrid protein is present in both the cytoplasmic and outer membranes of E. coli. Radioactive labeling experiments in the presence or absence of globomycin showed that the hybrid protein is modified with a diglyceride and fatty acids and is processed by signal peptidase II, as is the murein lipoprotein. The results indicated that the pCloDF13-encoded bacteriocin release protein is a lipoprotein which is associated with both membranes of E. coli cells.

Bacterial Proteins↗

Effects of divalent cations and of phospholipase A activity on excretion of cloacin DF13 and lysis of host cells.

Induction of cloacin DF13 synthesis in Escherichia coli harbouring plasmid CloDF13 results in the release of cloacin DF13, inhibition of growth and ultimately in lysis of the host cells. Expression of the pCloDF13-encoded protein H is essential for both the release of cloacin DF13 and the lysis of the cells. The divalent cations Mg2+ and Ca2+ interfered with the mitomycin C-induced protein H-dependent lysis, but hardly affected the release of cloacin DF13. Essentially all of the bacteriocin was released from the cells before a detectable degradation of the peptidoglycan occurred, independent of the presence of mitomycin C. Experiments with phospholipase A mutants revealed that activation of detergent-resistant phospholipase A was essential for the export of cloacin DF13 across the outer membrane and the lysis of induced cells. Transport of cloacin DF13 across the cytoplasmic membrane was mainly dependent on protein H. A revised model for the excretion of cloacin DF13 is presented.

Bacterial Proteins↗

Uptake of cloacin DF13 by susceptible cells: removal of immunity protein and fragmentation of cloacin molecules.

Monoclonal antibodies (MAb) directed against different epitopes on the equimolar complex of cloacin and immunity protein (cloacin DF13) were isolated, characterized, and used to study the uptake of cloacin DF13 by susceptible cells. Four MAbs recognized the amino-terminal part, one MAb recognized the central part, and three MAbs recognized the carboxyl-terminal part of the cloacin molecule. Three MAbs reacted with the immunity protein. Five MAbs inhibited the lethal action of cloacin DF13, but none of the MAbs inhibited the binding of cloacin DF13 to its purified outer membrane receptor protein or the in vitro inactivation of ribosomes. Binding of cloacin DF13 to susceptible cells cultured in broth resulted in a specific, time-dependent dissociation of the complex and a fragmentation of the cloacin molecules. Increasing amounts of immunity protein were detected in the culture medium from about 20 min after the addition of cloacin DF13. Cloacin was fragmented into two carboxyl-terminal fragments with relative molecular masses of 50,000 and 10,000. The larger fragment was detected 5 min after the binding of the bacteriocin complex to the cells. The smaller fragment was detected after 10 min. Both fragments were associated with the cells and could not be detected in the culture supernatant fraction. Cells grown in brain heart infusion were much less susceptible to cloacin DF13 than cells grown in broth, although they possessed a similar number of outer membrane receptor molecules. This decreased susceptibility correlated with a decreased translocation, dissociation, and fragmentation of cloacin DF13.

Animals↗

Plasmid-determined cloacin DF13-susceptibility in Enterobacter cloacae and Klebsiella edwardsii; identification of the cloacin DF13/aerobactin outer membrane receptor proteins.

Both Enterobacter cloacae H478 and Klebsiella edwardsii S15 were shown to harbour a relatively large conjugative plasmid that coded for cloacin DF13-susceptibility and the production and uptake of a hydroxamate iron chelator, most probably aerobactin. Protein-blotting experiments with antiserum raised against the purified cloacin DF13/aerobactin receptor protein from Escherichia coli (Co1V-K30) revealed that the corresponding outer membrane receptor proteins of Ent. cloacae H478 and K. edwardsii S15 had apparent mol wts of 85 000 and 76 000, respectively. E. coli transconjugants harbouring either the plasmid from Ent. cloacae H478 or K. edwardsii S15 expressed a cloacin DF13/aerobactin outer membrane receptor protein with a mol wt of 74 000. The receptor protein encoded by the Ent. cloacae and K. edwardsii plasmids were immunologically more related to each other than to the pCo1V-K30-encoded receptor protein.

Bacterial Outer Membrane Proteins↗

Excretion of proteins by gram-negative bacteria: export of bacteriocins and fimbrial proteins by Escherichia coli.

In gram-negative bacteria only few proteins are exported across both the cytoplasmic membrane and the outer membrane which forms an extra barrier for protein excretion. In this review we describe the mechanisms of production and export of two types of plasmid-encoded proteins in Escherichia coli. These proteins are the bacteriocin cloacin DF13 and the K88ab and K99 fimbrial subunits. Specific so-called helper proteins located at different positions in the cell envelope play an essential role in the export of these proteins. The genetic organization, subcellular location and functions of these helper proteins, as well as the effects of mutations and culture conditions on the export of the proteins are described. Models for the export mechanisms are presented and future application possibilities for engineering foreign protein excretion in E. coli with these export systems are discussed.

Bacterial Proteins↗

Cloning and expression of the cloacin DF13/aerobactin receptor of Escherichia coli (ColV-K30).

A DNA fragment derived from the ColV-K30 plasmid and coding for both sensitivity to cloacin DF13 and Fe3+-aerobactin uptake was cloned into pBR322. The cloned fragment coded for two polypeptides with molecular masses of 74,000 (the cloacin DF13/aerobactin receptor protein) and 50,000 daltons, respectively. When grown with sufficient iron, cells harboring pFS8 (with this fragment) possessed about 10 times as many receptor protein molecules as compared with cells of Escherichia coli (ColV-K30). The synthesis of the receptor protein specified by pFS8, however, was independent of the availability of iron, in contrast to strains harboring the intact ColV-K30 plasmid. Aerobactin was taken up but not synthesized by cells harboring pFS8. No growth occurred when iron-starved cultures of these cells were incubated with Fe3+-aerobactin, suggesting that expression of other ColV-K30-encoded genes is necessary to remove the iron from the Fe3+-aerobactin complex.

Bacterial Outer Membrane Proteins↗

Subcloning of the cloacin DF13/aerobactin receptor protein and identification of a pColV-K30-determined polypeptide involved in ferric-aerobactin uptake.

A plasmid containing a pColV-K30 fragment that encoded only for the cloacin DF13/aerobactin receptor protein was constructed. Escherichia coli cells harboring this plasmid were sensitive to cloacin DF13 but were unable to take up ferric-aerobactin. Another pColV-K30-determined polypeptide (molecular weight, 50,000), localized in the membrane fraction, was essential for the uptake of ferric-aerobactin.

Bacterial Outer Membrane Proteins↗

Siderophore production by Enterobacter cloacae and a common receptor protein for the uptake of aerobactin and cloacin DF13.

Iron-starved cultures of Enterobacter cloacae produced two siderophores, identified as enterochelin and aerobactin. The aerobactin was excreted in larger amounts than was enterochelin, and it was synthesized preferentially in the late logarithmic and stationary growth phases under iron-deficient conditions. Enterochelin was synthesized by cultures in the logarithmic phase of growth and preferentially in medium with 1 microM ferric chloride. Both siderophores appeared to be excreted immediately after their synthesis, since no intracellular aerobactin or enterochelin could be detected. The killing activity of the bacteriocin cloacin DF13 was inhibited by aerobactin. It was shown that aerobactin and cloacin DF13 bound to the same receptor sites located in the outer membrane. The synthesis of these receptor sites was induced by iron limitation. We conclude that the receptor for the uptake of aerobactin also functions as receptor for cloacin DF13.

Adsorption↗