PubMed Health⌕ Search

Biomedical subjects

B P Neri

Publications and source records attributed to B P Neri.

16 recordsLinked to original sources
PubMed2003

Improved sensitivity for solid-support invasive cleavage reactions with flow cytometry analysis.

A new configuration of the solid-support invasive cleavage reaction provides a small reaction-volume format for high-sensitivity discrimination of nucleic acid targets with single nucleotide differences. With target concentrations as low as 2 amol/assay, the solid-support invasive cleavage reaction clearly distinguishes single base mutations. Two oligonucleotides tethered to the solid support hybridize to the target nucleic acid, forming a tripartite substrate that can be recognized and cleaved by Cleavase, a structure-specific 5'-nuclease. Each cleavage event yields fluorescence signal on the surface. When microspheres serve as the solid-support surface, analysis by fluorometer imparts real-time information about change in the reaction signal over time. Flow cytometry provides an alternative detection technology that collects endpoint information about the reaction signal on individual microspheres. A reaction volume of 10 microL with as few as 3000 microspheres is sufficient to distinguish single nucleotide differences at target concentrations less than 200 fM. This sensitivity level is within the range required for analysis of SNPs in genomic DNA. In addition, the flow cytometry format has multiplexing potential, making the microsphere-based invasive cleavage assay attractive for high-throughput genomic applications.

Apolipoproteins E↗
PubMed2001

Analysis of single nucleotide polymorphisms with solid phase invasive cleavage reactions.

Using microparticles as the capture surface and fluorescence resonance energy transfer as the detection technology, we have demonstrated the feasibility of performing the invasive cleavage reaction on a solid phase. An effective tool for many genomic applications, the solution phase invasive cleavage assay is a signal amplification method capable of distinguishing nucleic acids that differ by only a single base mutation. The method positions two overlapping oligonucleotides, the probe and upstream oligonucleotides, on the target nucleic acid to create a complex recognized and cleaved by a structure-specific 5'-nuclease. For microarray and other multiplex applications, however, the method must be adapted to a solid phase platform. Effective cleavage of the probe oligonucleotide occurred when either of the two required overlapping oligonucleotides was configured as the particle-bound reagent and also when both oligonucleotides were attached to the solid phase. Positioning probe oligonucleotides away from the particle surface via long tethers improved both the signal and the reaction rates. The particle-based invasive cleavage reaction was capable of distinguishing the ApoE Cys158 and Arg158 alleles at target concentrations as low as 100 amol/assay (0.5 pM).

Alleles↗
PubMed2001

Secondary structure prediction and structure-specific sequence analysis of single-stranded DNA.

DNA sequence analysis by oligonucleotide binding is often affected by interference with the secondary structure of the target DNA. Here we describe an approach that improves DNA secondary structure prediction by combining enzymatic probing of DNA by structure-specific 5'-nucleases with an energy minimization algorithm that utilizes the 5'-nuclease cleavage sites as constraints. The method can identify structural differences between two DNA molecules caused by minor sequence variations such as a single nucleotide mutation. It also demonstrates the existence of long-range interactions between DNA regions separated by >300 nt and the formation of multiple alternative structures by a 244 nt DNA molecule. The differences in the secondary structure of DNA molecules revealed by 5'-nuclease probing were used to design structure-specific probes for mutation discrimination that target the regions of structural, rather than sequence, differences. We also demonstrate the performance of structure-specific 'bridge' probes complementary to non-contiguous regions of the target molecule. The structure-specific probes do not require the high stringency binding conditions necessary for methods based on mismatch formation and permit mutation detection at temperatures from 4 to 37 degrees C. Structure-specific sequence analysis is applied for mutation detection in the Mycobacterium tuberculosis katG gene and for genotyping of the hepatitis C virus.

5' Untranslated Regions↗
PubMed2001

Mapping of RNA accessible sites by extension of random oligonucleotide libraries with reverse transcriptase.

A rapid and simple method for determining accessible sites in RNA that is independent of the length of target RNA and does not require RNA labeling is described. In this method, target RNA is allowed to hybridize with sequence-randomized libraries of DNA oligonucleotides linked to a common tag sequence at their 5'-end. Annealed oligonucleotides are extended with reverse transcriptase and the extended products are then amplified by using PCR with a primer corresponding to the tag sequence and a second primer specific to the target RNA sequence. We used the combination of both the lengths of the RT-PCR products and the location of the binding site of the RNA-specific primer to determine which regions of the RNA molecules were RNA extendible sites, that is, sites available for oligonucleotide binding and extension. We then employed this reverse transcription with the random oligonucleotide libraries (RT-ROL) method to determine the accessible sites on four mRNA targets, human activated ras (ha-ras), human intercellular adhesion molecule-1 (ICAM-1), rabbit beta-globin, and human interferon-gamma (IFN-gamma). Our results were concordant with those of other researchers who had used RNase H cleavage or hybridization with arrays of oligonucleotides to identify accessible sites on some of these targets. Further, we found good correlation between sites when we compared the location of extendible sites identified by RT-ROL with hybridization sites of effective antisense oligonucleotides on ICAM-1 mRNA in antisense inhibition studies. Finally, we discuss the relationship between RNA extendible sites and RNA accessibility.

Animals↗
PubMed2001

Genotyping single-nucleotide polymorphisms by the invader assay with dual-color fluorescence polarization detection.

BACKGROUND: The PCR-Invader assay is a robust, homogeneous assay that has been shown to be highly sensitive and specific in genotyping single-nucleotide polymorphism (SNP) markers. In this study, we introduce two changes to improve the assay: (a) we streamline the PCR-Invader method by assaying both alleles for each SNP in one reaction; and (b) we reduce the cost of the method by adopting fluorescence polarization (FP) as the detection method. METHODS: PCR product was incubated with Invader oligonucleotide and two primary probes at 93 degrees C for 5 min. Signal probes corresponding to the cleaved flaps of the primary probes [labeled with fluorescein and 6-carboxytetramethylrhodamine (TAMRA) dye] and Cleavase VIII enzyme (a flap endonuclease) were then added to the mixture. This reaction mixture was incubated at 63 degrees C for 5 min. FP measurements were made with a fluorescence plate reader. RESULTS: Eighty-eight individuals were genotyped across a panel of 10 SNPs, using PCR product as template, for a total of 880 genotypes. An average "no call" rate of 3.2% was observed after first round of experiments. PCR products were remade in those samples that failed to produce any genotype in the first round, and all gave clear-cut genotypes. When the genotypes determined by the PCR-Invader assay and template-directed dye-terminator incorporation assay with FP were compared, they were in 100% concordance for all SNP markers and experiments. CONCLUSIONS: The improvements introduced in this study make PCR-Invader assay simpler and more cost-effective, and therefore more suitable for high-throughput genotyping.

Fluorescence Polarization↗
PubMed2000

RNA template-dependent 5' nuclease activity of Thermus aquaticus and Thermus thermophilus DNA polymerases.

DNA replication and repair require a specific mechanism to join the 3'- and 5'-ends of two strands to maintain DNA continuity. In order to understand the details of this process, we studied the activity of the 5' nucleases with substrates containing an RNA template strand. By comparing the eubacterial and archaeal 5' nucleases, we show that the polymerase domain of the eubacterial enzymes is critical for the activity of the 5' nuclease domain on RNA containing substrates. Analysis of the activity of chimeric enzymes between the DNA polymerases from Thermus aquaticus (TaqPol) and Thermus thermophilus (TthPol) reveals two regions, in the "thumb" and in the "palm" subdomains, critical for RNA-dependent 5' nuclease activity. There are two critical amino acids in those regions that are responsible for the high activity of TthPol on RNA containing substrates. Mutating glycine 418 and glutamic acid 507 of TaqPol to lysine and glutamine, respectively, increases its RNA-dependent 5' nuclease activity 4-10-fold. Furthermore, the RNA-dependent DNA polymerase activity is controlled by a completely different region of TaqPol and TthPol, and mutations in this region do not affect the 5' nuclease activity. The results presented here suggest a novel substrate binding mode of the eubacterial DNA polymerase enzymes, called a 5' nuclease mode, that is distinct from the polymerizing and editing modes described previously. The application of the enzymes with improved RNA-dependent 5' nuclease activity for RNA detection using the invasive signal amplification assay is discussed.

Amino Acid Sequence↗
PubMed2000

Experimental and theoretical analysis of the invasive signal amplification reaction.

The invasive signal amplification reaction is a sensitive method for single nucleotide polymorphism detection and quantitative determination of viral load and gene expression. The method requires the adjacent binding of upstream and downstream oligonucleotides to a target nucleic acid (either DNA or RNA) to form a specific substrate for the structure-specific 5' nucleases that cleave the downstream oligonucleotide to generate signal. By running the reaction at an elevated temperature, the downstream oligonucleotide cycles on and off the target leading to multiple cleavage events per target molecule without temperature cycling. We have examined the performance of the FEN1 enzymes from Archaeoglobus fulgidus and Methanococcus jannaschii and the DNA polymerase I homologues from Thermus aquaticus and Thermus thermophilus in the invasive signal amplification reaction. We find that the reaction has a distinct temperature optimum which increases with increasing length of the downstream oligonucleotide. Raising the concentration of either the downstream oligonucleotide or the enzyme increases the reaction rate. When the reaction is configured to cycle the upstream instead of the downstream oligonucleotide, only the FEN1 enzymes can support a high level of cleavage. To investigate the origin of the background signal generated during the invasive reaction, the cleavage rates for several nonspecific substrates that arise during the course of a reaction were measured and compared with the rate of the specific reaction. We find that the different 5' nuclease enzymes display a much greater variability in cleavage rates on the nonspecific substrates than on the specific substrate. The experimental data are compared with a theoretical model of the invasive signal amplification reaction.

3' Untranslated Regions↗
PubMed2000

Sensitive detection of DNA polymorphisms by the serial invasive signal amplification reaction.

The invasive signal amplification reaction has been previously developed for quantitative detection of nucleic acids and discrimination of single-nucleotide polymorphisms. Here we describe a method that couples two invasive reactions into a serial isothermal homogeneous assay using fluorescence resonance energy transfer detection. The serial version of the assay generates more than 10(7) reporter molecules for each molecule of target DNA in a 4-h reaction; this sensitivity, coupled with the exquisite specificity of the reaction, is sufficient for direct detection of less than 1,000 target molecules with no prior target amplification. Here we present a kinetic analysis of the parameters affecting signal and background generation in the serial invasive signal amplification reaction and describe a simple kinetic model of the assay. We demonstrate the ability of the assay to detect as few as 600 copies of the methylene tetrahydrofolate reductase gene in samples of human genomic DNA. We also demonstrate the ability of the assay to discriminate single base differences in this gene by using 20 ng of human genomic DNA.

Base Sequence↗
PubMed2000

The kinetics of oligonucleotide replacements.

The formation of a duplex between two nucleic acid strands is restricted if one of the strands forms an intra- or intermolecular secondary structure. The formation of the new duplex requires the dissociation and replacement of the initial structure. To understand the mechanism of this type of kinetics we studied the replacement of a labeled DNA oligonucleotide probe bound to a complementary DNA target with an unlabeled probe of the same sequence. The replacement kinetics were measured using a gel-shift assay for 12, 14 and 16-nucleotide probes as a function of temperature and concentration of the unlabeled probe. The results demonstrate that the overall replacement rate is a combination of two kinetic pathways: dissociative and sequential displacement. The dissociative pathway occurs by the spontaneous dissociation of the initial duplex followed by association of the target and unlabeled probe. The sequential displacement pathway requires only the partial melting of the initial duplex to allow for the formation of a branched nucleation complex with the unlabeled probe, followed by the complete displacement of the labeled probe by migration of the branch point. The contribution from the dissociative pathway is predominant at temperatures close to the melting point of the labeled probe, whereas the contribution from the displacement pathway prevails at lower temperatures and when the concentration of the replacing unlabeled probe is high. The results show that at physiological conditions, duplex formation between a single-stranded oligonucleotide probe and a structured region of a target molecule occurs mainly by the sequential-displacement mechanism.

Base Pairing↗
PubMed1999

Polymorphism identification and quantitative detection of genomic DNA by invasive cleavage of oligonucleotide probes.

Flap endonucleases (FENs) isolated from archaea are shown to recognize and cleave a structure formed when two overlapping oligonucleotides hybridize to a target DNA strand. The downstream oligonucleotide probe is cleaved, and the precise site of cleavage is dependent on the amount of overlap with the upstream oligonucleotide. We have demonstrated that use of thermostable archaeal FENs allows the reaction to be performed at temperatures that promote probe turnover without the need for temperature cycling. The resulting amplification of the cleavage signal enables the detection of specific DNA targets at sub-attomole levels within complex mixtures. Moreover, we provide evidence that this cleavage is sufficiently specific to enable discrimination of single-base differences and can differentiate homozygotes from heterozygotes in single-copy genes in genomic DNA.

Archaeoglobus fulgidus↗
PubMed1997

Determination of hepatitis C virus genotypes in the United States by cleavase fragment length polymorphism analysis.

We describe the application of a new DNA-scanning method, which has been termed Cleavase Fragment Length Polymorphism (CFLP; Third Wave Technologies, Inc., Madison, Wis.), for the determination of the genotype of hepatitis C virus (HCV). CFLP analysis results in the generation of structural fingerprints that allow discrimination of different DNA sequences. We analyzed 251-bp cDNA products generated by reverse transcription-PCR of the well-conserved 5'-noncoding region of HCV. We determined the genotypes of 87 samples by DNA sequencing and found isolates representing 98% of the types typically encountered in the United States, i.e., types 1a, 1b, 2a/c, 2b, 3a, and 4. Blinded CFLP analysis of these samples was 100% concordant with DNA sequencing results, such that closely related genotypes yielded patterns with strong familial resemblance whereas more divergent sequences yielded patterns with pronounced dissimilarities. In each case, the aggregate pattern was indicative of genotypic grouping, while finer changes suggested subgenotypic differences. We also assessed the reproducibility of CFLP analysis in HCV genotyping by analyzing three distinct isolates belonging to a single subtype. These three isolates yielded indistinguishable CFLP patterns, as did replicate analysis of a single isolate. This study demonstrates the suitability of this technology for HCV genotyping and suggests that it may provide a low-cost, high-throughput alternative to DNA sequencing or other, more costly or cumbersome genotyping approaches.

Base Sequence↗