PubMed Health⌕ Search

Biomedical subjects

B T Bates

Publications and source records attributed to B T Bates.

At least 19 recordsLinked to original sources
PubMed2001

A dynamical systems investigation of lower extremity coordination during running over obstacles.

OBJECTIVE: To investigate intralimb coordination during running over a level surface and over obstacles of three different heights. DESIGN: The phasing relationships between the foot and leg motions in the frontal plane, and the shank and thigh motions in the sagittal plane were used to compare patterns of coordination. BACKGROUND: The coordinated actions of lower extremity segments are necessary to absorb the impact forces generated during running. The behavioral patterns of these segments can be studied under changing task demands using analysis techniques from the Dynamical Systems Theory. METHODS: Ten subjects ran at their self-selected pace under four conditions: over a level surface and over obstacles of different heights (5%, 10%, 15% of their standing height). A force platform was used to record impact forces during landing after obstacle clearance, while kinematics were collected using a two-camera system. RESULTS: The increases in obstacle height resulted in significant changes in impact forces (34% increase between the two extreme conditions) and more in-phase relationships between the segments during early stance. No changes were observed in the variability of the phasing relationships. CONCLUSIONS: The coordination changes observed might be compensatory strategies aimed to reduce forces and potential injury. However, since the impact forces still increased significantly, it is also possible that the observed changes might be at-risk movement patterns predisposing runners to injury.

Adult↗
PubMed2000

Contributions of lower extremity joints to energy dissipation during landings.

PURPOSE: The purpose of the study was to investigate changes in lower extremity joint energy absorption for different landing heights and landing techniques. METHODS: Nine healthy, active male subjects volunteered to perform step-off landings from three different heights (0.32 m, 2.5 m(-s); 0.62 m, 3.5 m(-s); and 1.03 m, 4.5 m(-s)) using three different landing techniques (soft, SFL; normal, NML; and stiff landing, STL). Each subject initially performed five NML trials at 0.62 m to serve as a baseline condition and subsequently executed five trials in each of the nine test conditions (3 heights x 3 techniques). RESULTS: The results demonstrated general increases in peak ground reaction forces, peak joint moments, and powers with increases in landing height and stiffness. The mean eccentric work was 0.52, 0.74, and 0.87 J x kg(-1) by the ankle muscles, and 0.94, 1.31, and 2.15 J x kg(-1) by the hip extensors, at 0.32, 0.62, and 1.03 m, respectively. The average eccentric work performed by the knee extensors was 1.21, 1.63, and 2.26 J x kg(-1) for the same three heights. CONCLUSIONS: The knee joint extensors were consistent contributors to energy dissipation. The ankle plantarflexors contributed more in the STL landings, whereas the hip extensors were greater contributors during the SFL landings. Also a shift from ankle to hip strategy was observed as landing height increased.

Adult↗
PubMed2000

Effects of injury proneness and task difficulty on joint kinetic variability.

PURPOSE: The purpose was to investigate the effects of lower extremity overuse injury proneness and landing height on the variability of selected joint moment characteristics. METHODS: Ten subjects from each of two groups (healthy and injury prone) performed 10 landings from a platform (heights: 50, 100, and 200% of maximum vertical jump). Force platform (1000 Hz) and video (200 Hz) information were collected and used to compute ankle, knee, and hip joint moment values during impact (0-100 ms post contact). Moment peak, time to peak, and impulse values were used to determine variability across 10 trials for each subject and height. MANOVAs and univariate follow-up tests were used to assess variability differences between groups and among heights. RESULTS: Results revealed ankle moment variability differences (P < or = 0.05; Tukey) between groups for peak and time to peak variables at the 100% and 50% heights, respectively. The injury-prone group exhibited greater variability for the peak variable, whereas the healthy group showed greater variability for the temporal variable. Groups also differed on the impulse variables (P < or = 0.02; MANOVA), but follow-up tests failed to determine specific joints or directions of differences. Both groups exhibited tendencies for greater variability (P < or = 0.05; Tukey) with increases in height up to 100% MVJ and decreases in variability with further height increases. CONCLUSIONS: Results suggest that groups differed in joint moment variability, possibly indicating a relationship between variability and overuse injuries, although the variables and directions of differences were inconsistent. For some variables, variability increased and then decreased with height increases for both groups, suggesting a range of heights within which the neuromuscular system adapted.

Adult↗
PubMed1999

Asynchrony between subtalar and knee joint function during running.

PURPOSE: It has been suggested that during running proper coordination between subtalar joint pronation/supination and knee joint flexion/extension via tibial rotation is important to attenuate ground reaction impact forces (GRIF). Lack of coordination may produce over time a wide range of injuries. The goal of this study was to investigate the relationship between subtalar pronation/supination and knee flexion/extension with GRIF increases during distance running. METHODS: Eight subjects ran under different speeds (a self-selected pace, 10% faster, 10% slower, and 20% faster) and over different obstacle heights (5%, 10%, and 15% of their standing height) on their self-selected pace. Sagittal, rear-view kinematic, and GRIF data were collected. The biomechanical results were also compared with data from a clinical evaluation of the subjects. RESULTS: Speed changes and obstacle heights produced increases in GRIF and differences between rearfoot and knee angular velocities. The higher the obstacle and the faster the speed, the greater the GRIF and the greater the velocity differences. A change of the rearfoot angle curve from a unimodal (one minimum) to a bimodal (two minimums) parabolic configuration was also observed. The appearance of the second minimum was attributed to a lateral deviation of the tibia as a rebound effect due to the increased impact with the ground. The velocity differences between the actions of the subtalar and the knee joint, which in essence capture the antagonistic nature of their relationship, produced the highest correlation with the clinical evaluation. CONCLUSIONS: It was suggested that a possible mechanism responsible for various running injuries could be lack of coordination between subtalar and knee joint actions. This mechanism may have potential for predicting runners with susceptibility to injury.

Adult↗
PubMed1996

The effects of sample size and variability on the correlation coefficient.

The purpose of the study was to investigate the effects of variability as a function of sample size on the Pearson product-moment correlation coefficient (PCC) under the assumption of a perfect relationship between two variables. The effects of sample size (subjects/trials) and variability on the PCC were demonstrated using a computer model. The model was also used to evaluate selected examples taken from the literature. The results indicated that variability in excess of 10% of the range for each variable resulted in a mean reduction of the shared variance by 50% or greater. Although sample size did not affect the mean PCC, it did have a dramatic effect on extreme percentile values producing unreliable results. These results indicate that a small PCC value can be an artifact of variability. It is suggested, therefore, that one should be cautious when stating conclusions regarding the relationship between two variables without having knowledge of the associated variabilities.

Humans↗
PubMed1996

Single-subject methodology: an alternative approach.

The purpose of this paper is to identify and discuss an alternative experimental methodology, single-subject (SS) design. The primary premise for SS analyses forms the basis for many research questions in areas such as movement/motor control, individual performance patterns/strategies, and injury mechanisms. A brief historical perspective elucidating the evolution of modern-day group statistical techniques and the relationship to the individual is presented. Rationale for the SS design within this context is also discussed. Specific statistical applications include mean comparison tests (ANOVA, Model Statistics), correlation, and multiple regression. Validation of the underlying statistical assumptions of independence and normality relative to the applications are briefly discussed. Finally, several examples are included.

Data Interpretation, Statistical↗
PubMed1995

The assessment of mechanical and neuromuscular response strategies during landing.

The purpose of this study was to assess relative contributions of mechanical and neuromuscular mechanisms to control of landing. Proposed mechanical and neuromuscular response strategies were evaluated relative to lower extremity impact force attenuation. Four subjects performed three conditions of 25 landings from a 60-cm height on each of two days. Additional masses were attached at each ankle for the second and removed for the third condition. Vertical ground reaction force and integrated electromyographic (IEMG) data were used to assess responses. Fourteen of 32 total single subject comparisons were significant in a mechanically predicted direction, indicating the presence of both mechanical and neuromuscular response strategies among subjects. Responses in the mechanical direction for rearfoot impact were consistent with a model predicting mechanical force changes. The presence of mechanical responses for forefoot impact not completely accounted for by the model suggested that the definition of a neuromuscular response not be limited to responses functioning in a protective manner. Multiple regression analyses relating added mass and IEMG to impact force magnitude demonstrated the complex nature of all responses. Vastus medialis IEMG was the most common independent variable included in regression models, emphasizing the importance of knee musculature in landing control.

Adult↗
PubMed1995

The effect of trial size and variability on statistical power.

A computer model was developed, validated, and used in conjunction with Monte Carlo procedures to study the effects of sample size (subjects and trials), mean differences, and subject variability on statistical power. Also examined were the differences between single subject (SS) and group results. Mean differences were varied from 1/4 to 4 times the distribution SD resulting in improved power values. Mean group F results ranged from 63.6% to 100% while SS results were poorer, especially for the smaller mean differences (16.8%-100%). Subject variability was examined for a Simple model and two Complex (MOD1 and MOD4) models. MOD1 produced group results similar to the corresponding Simple model with an overall mean of 78.2% and a Complex/Simple (C/S) ratio of 0.99. The more variable model (MOD4) produced fewer significant results (52.9%) and a lesser C/S ratio (0.82). The SS results were more dramatic. The percentages of significant values were less (38.1% and 33.9%) and the C/S ratios favored the Complex models (1.48 and 3.17). Both sample size and trial size had a major impact on the results. In summary, these results provide additional insight into the interactive effects and importance of the factors investigated, especially in the area of SS experiments.

Humans↗
PubMed1994

Bilateral performance symmetry during drop landing: a kinetic analysis.

The assumption that lower extremity function is bilaterally symmetrical is prevalent throughout the biomechanics literature. The unilateral development of many overuse and acute injuries may suggest that this assumption is inaccurate. Analyses of bilateral function report conflicting results and may be partially attributable to the types of movement activities utilized and to research methodology. The purpose of this study was to evaluate the concurrent bilateral performance of the lower extremities during an apparently symmetrical movement task. Concurrent left/right side vertical ground reaction forces (VGRF) and lower extremity joint moments (JM) were obtained for 10 subjects performing 25 voluntary hanging drop landings (60 cm) on each of 3 consecutive days. Bilateral variability (BV) and systematic bilateral asymmetry (BA) were calculated for each trial. Bilateral variability was less for VGRF variables (12.8%) than JM variables (25.3%). Bilateral asymmetry was identified more often among VGRF variables (52.5%) than JM variables (16.7%). The magnitude of identified BA was greater than either the group BV (25%) or BA (110%) and indicates that bilateral differences are biomechanically meaningful.

Adult↗
PubMed1994

Evaluation of time-series data sets using the Pearson product-moment correlation coefficient.

The Pearson product-moment correlation has been used by researchers to compare time series data sets to assess the temporal similarities. Computer generated data, vertical ground reaction force (VGRF) data and hybrid data (constructed by combining features of computer generated and VGRF data) were used to investigate the influence of timing and amplitude differences on the effectiveness of this technique. Under a specific set of conditions the correlation coefficient is a valid and reliable indicator of temporal similarity. Deviations from these conditions, however, result in interactive effects between timing and amplitude components with subsequent reductions in the value of the coefficient. Although GRF data were evaluated, the results apply equally to other types of curves as well. The correlation coefficient is easy to use and can be used to evaluate the entire curve as opposed to discrete data points. Its usefulness is jeopardized, however, since it can be influenced by timing and amplitude differences as well as the characteristics of the curves being analyzed. A high coefficient is always indicative of temporal similarity but a lesser value does not guarantee a lack of temporal similarity.

Biomechanical Phenomena↗
PubMed1992

The effect of trial size on statistical power.

Many research studies produce results that falsely support a null hypothesis due to a lack of statistical power. The purpose of this research was to demonstrate selected relationships between single subject (SS) and group analyses and the importance of data reliability (trial size) on results. A computer model was developed and used in conjunction with Monte Carlo procedures to study the effects of sample size (subjects and trials), within- and between-subject variability, and subject performance strategies on selected statistical evaluation procedures. The inherent advantages of the approach are control and replication. Selected results are presented in this paper. Group analyses on subjects using similar performance strategies identified 10, 5, and 3 trials for sample sizes of 5, 10, and 20, respectively, as necessary to achieve statistical power values greater than 90% for effect sizes equal to one standard deviation of the condition distribution. SS analyses produced results exhibiting considerably less power than the group results for corresponding trial sizes, indicating how much more difficult it is to detect significant differences using a SS design. These results should be of concern to all investigators especially when interpreting nonsignificant findings.

Data Interpretation, Statistical↗
PubMed1992

Timing of lower extremity joint actions during treadmill running.

It has been suggested that a disruption in timing between the subtalar and knee joints may be a possible mechanism for knee injury. It has also been documented that shoe construction can alter rearfoot motion. The purpose of the study was to describe the relationship between the subtalar and knee joint actions during the support phase of treadmill running while wearing different shoes. Twelve healthy subjects ran in each of three running shoes with unique midsole durometers (C1, 70; C2, 55; C3, 45). High-speed video (200 Hz) of the rear and sagittal views of each subject/condition were taken during the last minute of a 5-min run. Retro-reflective markers were processed to determine the rearfoot angle and the sagittal view knee angle. The shoes were also subjected to a midsole material impact test. The impact test results indicated a linear trend in peak g and time to peak g across midsoles with the firmer midsole having a greater peak g and a shorter time to peak g. The results of the kinematic analysis indicated that there were no significant differences among the shoe conditions for the knee flexion parameters. However, there were significant differences in both the magnitude and the time to maximum pronation between the two firmer midsole conditions (C1 and C2) and the softer midsole condition (C3), indicating a nonlinear trend for these parameters. The softer midsole exhibited greater pronation values and a shorter time to maximum pronation.(ABSTRACT TRUNCATED AT 250 WORDS)

Adult↗
PubMed1991

Biomechanical implications of mild leg length inequality.

The effect of mild leg length inequality (lower extremity length difference less than 3 cm) on posture and gait has been the source of much controversy. Many opinions have been expressed both for and against the need for intervention to reduce the magnitude of the discrepancy. This paper emphasizes the need for accurate and reliable assessment of leg length differences using a clinically functional radiographic technique, and reviews the biomechanical implications of leg length inequality as related to the development of stress fractures, low back pain and osteoarthritis.

Biomechanical Phenomena↗
PubMed1991

Biomechanical factors associated with injury during landing in jump sports.

Many sport and movement activities contain a jumping component which necessitates landing. Several injury surveys across a variety of jump sports have identified the lower extremities and specifically the knee joint as being a primary injury site. Factors which might contribute to the frequency and severity of such injuries include stresses to which the body is subjected during performance (forces and torques), body position at landing, performance execution and landing surface. Most of the initial landing studies were primarily descriptive in nature with many of the more recent efforts being directed toward identifying the specific performance factors that could account for the observed system stresses. Continued investigations into landing are necessary to more thoroughly understand the force attenuation mechanisms and critical performance variables associated with lower extremity injuries.

Athletic Injuries↗
PubMed1991

Dynamic performance assessment of selected sport shoes on impact forces.

Few investigators have evaluated the performance characteristics of non-running sport shoes. The purpose of this study was to assess the dynamic performance characteristics of four different shoe models during landings. Five male subjects performed 25 voluntary hanging drop landings (60 cm) onto a force platform (1000 Hz) for each of four shoe conditions (C1 and C2 = basketball shoe, C3 = running shoe, C4 = volleyball shoe). Ground reaction force data were evaluated for maximum forefoot (F1) and rearfoot (F2) impact forces as well as the respective times of occurrence of these events (T1, T2). Results of the group data analysis indicated a preferential performance rank order of C1, C3, C4, C2 although significant interaction effects were observed, indicating a need for single-subject analyses. Three techniques were incorporated to assess individual subject condition differences, all of which elicited unique rank orders for the shoes although each identified C1 as the "best" shoe condition. The results of the study support the necessity for within-subject analyses conducted with an adequate number of trials when attempting to detect subtle performance differences that may exist between various sport shoes. Whether the observed statistically significant differences are biomechanically meaningful remains an important unanswered question.

Adult↗
PubMed1990

The evaluation and prediction of impact forces during landings.

The investigation of impact force attenuation during landings may help identify performance strategies. The purpose of the study was to evaluate the effects of height (three), distance (three), and technique (three) on impact forces during landings. Three male volunteer subjects were filmed while performing three right foot landings onto a force platform for each combination of height, distance, and technique for a total of 81 trials per subject. Between- and within-subject three-way ANOVAs and three regression models (mechanical, biomechanical, refined biomechanical) were computed on the dependent variables of first (F1) and second (F2) maximum vertical force. Results of the between-subject ANOVAs indicated significant (P less than 0.05) height, distance, and technique main effects for F1 and a height x technique interaction for F2. The within-subject ANOVA results identified unique models for each of the three subjects. The biomechanical regression model exhibited the best predictions of F1 and F2 for S1 (81.0 and 72.0% explained variance, respectively), while the refined biomechanical model accounted for 83.4, 81.3, 80.9, and 88.0% of the F1 and F2 variances for S2 and S3, respectively. In conclusion, the within-subject results identified unique individual landing strategies that were masked by the group analyses suggesting that caution be exercised in using between-subject analysis techniques.

Adult↗
PubMed1989

Comment on 'The Influence of Running Velocity and Midsole Hardness on External Impact Forces in Heel-Toe-Running'.

Researchers not sufficiently sensitive to statistical power may interpret non-significant results as demonstrating that the conditions made no difference. Related issues include performer variability, sample size and effect size as they relate to experimental design. Examination of these factors suggests that caution must be exercised when interpreting the results of experimental data.

Analysis of Variance↗