PubMed Health⌕ Search

Biomedical subjects

B T Wimberly

Publications and source records attributed to B T Wimberly.

11 recordsLinked to original sources

Phasing the 30S ribosomal subunit structure.

The methods involved in determining the 850 kDa structure of the 30S ribosomal subunit from Thermus thermophilus were in many ways identical to those that are generally used in standard protein crystallography. This paper reviews and analyses the methods that can be used in phasing such large structures and shows that the anomalous signal collected from heavy-atom compounds bound to the RNA is both necessary and sufficient for ab initio structure determination at high resolution. In addition, measures to counter problems with non-isomorphism and radiation decay are described.

Crystallography, X-Ray↗

Crystal structure of the 30 S ribosomal subunit from Thermus thermophilus: purification, crystallization and structure determination.

We describe the crystallization and structure determination of the 30 S ribosomal subunit from Thermus thermophilus. Previous reports of crystals that diffracted to 10 A resolution were used as a starting point to improve the quality of the diffraction. Eventually, ideas such as the addition of substrates or factors to eliminate conformational heterogeneity proved less important than attention to detail in yielding crystals that diffracted beyond 3 A resolution. Despite improvements in technology and methodology in the last decade, the structure determination of the 30 S subunit presented some very challenging technical problems because of the size of the asymmetric unit, crystal variability and sensitivity to radiation damage. Some steps that were useful for determination of the atomic structure were: the use of anomalous scattering from the LIII edges of osmium and lutetium to obtain the necessary phasing signal; the use of tunable, third-generation synchrotron sources to obtain data of reasonable quality at high resolution; collection of derivative data precisely about a mirror plane to preserve small anomalous differences between Bijvoet mates despite extensive radiation damage and multi-crystal scaling; the pre-screening of crystals to ensure quality, isomorphism and the efficient use of scarce third-generation synchrotron time; pre-incubation of crystals in cobalt hexaammine to ensure isomorphism with other derivatives; and finally, the placement of proteins whose structures had been previously solved in isolation, in conjunction with biochemical data on protein-RNA interactions, to map out the architecture of the 30 S subunit prior to the construction of a detailed atomic-resolution model.

Crystallization↗

Crystal structure of an initiation factor bound to the 30S ribosomal subunit.

Initiation of translation at the correct position on messenger RNA is essential for accurate protein synthesis. In prokaryotes, this process requires three initiation factors: IF1, IF2, and IF3. Here we report the crystal structure of a complex of IF1 and the 30S ribosomal subunit. Binding of IF1 occludes the ribosomal A site and flips out the functionally important bases A1492 and A1493 from helix 44 of 16S RNA, burying them in pockets in IF1. The binding of IF1 causes long-range changes in the conformation of H44 and leads to movement of the domains of 30S with respect to each other. The structure explains how localized changes at the ribosomal A site lead to global alterations in the conformation of the 30S subunit.

Base Pairing↗

The structural basis for the action of the antibiotics tetracycline, pactamycin, and hygromycin B on the 30S ribosomal subunit.

We have used the recently determined atomic structure of the 30S ribosomal subunit to determine the structures of its complexes with the antibiotics tetracycline, pactamycin, and hygromycin B. The antibiotics bind to discrete sites on the 30S subunit in a manner consistent with much but not all biochemical data. For each of these antibiotics, interactions with the 30S subunit suggest a mechanism for its effects on ribosome function.

Anti-Bacterial Agents↗

Structure of the 30S ribosomal subunit.

Genetic information encoded in messenger RNA is translated into protein by the ribosome, which is a large nucleoprotein complex comprising two subunits, denoted 30S and 50S in bacteria. Here we report the crystal structure of the 30S subunit from Thermus thermophilus, refined to 3 A resolution. The final atomic model rationalizes over four decades of biochemical data on the ribosome, and provides a wealth of information about RNA and protein structure, protein-RNA interactions and ribosome assembly. It is also a structural basis for analysis of the functions of the 30S subunit, such as decoding, and for understanding the action of antibiotics. The structure will facilitate the interpretation in molecular terms of lower resolution structural data on several functional states of the ribosome from electron microscopy and crystallography.

Bacterial Proteins↗

Functional insights from the structure of the 30S ribosomal subunit and its interactions with antibiotics.

The 30S ribosomal subunit has two primary functions in protein synthesis. It discriminates against aminoacyl transfer RNAs that do not match the codon of messenger RNA, thereby ensuring accuracy in translation of the genetic message in a process called decoding. Also, it works with the 50S subunit to move the tRNAs and associated mRNA by precisely one codon, in a process called translocation. Here we describe the functional implications of the high-resolution 30S crystal structure presented in the accompanying paper, and infer details of the interactions between the 30S subunit and its tRNA and mRNA ligands. We also describe the crystal structure of the 30S subunit complexed with the antibiotics paromomycin, streptomycin and spectinomycin, which interfere with decoding and translocation. This work reveals the structural basis for the action of these antibiotics, and leads to a model for the role of the universally conserved 16S RNA residues A1492 and A1493 in the decoding process.

Anti-Bacterial Agents↗

Another piece of the ribosome: solution structure of S16 and its location in the 30S subunit.

BACKGROUND: X-ray crystallography has recently yielded much-improved electron-density maps of the bacterial ribosome and its two subunits and many structural details of bacterial ribosome subunits are now being resolved. One approach to complement the structures and elucidate the details of rRNA and protein packing is to determine structures of individual protein components and model these into existing intermediate resolution electron density. RESULTS: We have determined the solution structure of the ribosomal protein S16 from Thermus thermophilus. S16 is a mixed alpha/beta protein with a novel folding scaffold based on a five-stranded antiparallel/parallel beta sheet. Three large loops, which are partially disordered, extend from the sheet and two alpha helices are packed against its concave surface. Calculations of surface electrostatic potentials show a large continuous area of positive electrostatic potential and smaller areas of negative potential. S16 was modeled into a 5.5 A electron-density map of the T. thermophilus 30S ribosomal subunit. CONCLUSIONS: The location and orientation of S16 in a narrow crevice formed by helix 21 and several other unassigned rRNA helices is consistent with electron density corresponding to the shape of S16, hydroxyl radical protection data, and the electrostatic surface potential of S16. Two protein neighbors to S16 are S4 and S20, which facilitate binding of S16 to the 30S subunit. Overall, this work exemplifies the benefits of combining high-resolution nuclear magnetic resonance (NMR) structures of individual components with low-resolution X-ray maps to elucidate structures of large complexes.

Amino Acid Sequence↗

Structure of a bacterial 30S ribosomal subunit at 5.5 A resolution.

The 30S ribosomal subunit binds messenger RNA and the anticodon stem-loop of transfer RNA during protein synthesis. A crystallographic analysis of the structure of the subunit from the bacterium Thermus thermophilus is presented. At a resolution of 5.5 A, the phosphate backbone of the ribosomal RNA is visible, as are the alpha-helices of the ribosomal proteins, enabling double-helical regions of RNA to be identified throughout the subunit, all seven of the small-subunit proteins of known crystal structure to be positioned in the electron density map, and the fold of the entire central domain of the small-subunit ribosomal RNA to be determined.

Bacterial Proteins↗

A detailed view of a ribosomal active site: the structure of the L11-RNA complex.

We report the crystal structure of a 58 nucleotide fragment of 23S ribosomal RNA bound to ribosomal protein L11. This highly conserved ribonucleoprotein domain is the target for the thiostrepton family of antibiotics that disrupt elongation factor function. The highly compact RNA has both familiar and novel structural motifs. While the C-terminal domain of L11 binds RNA tightly, the N-terminal domain makes only limited contacts with RNA and is proposed to function as a switch that reversibly associates with an adjacent region of RNA. The sites of mutations conferring resistance to thiostrepton and micrococcin line a narrow cleft between the RNA and the N-terminal domain. These antibiotics are proposed to bind in this cleft, locking the putative switch and interfering with the function of elongation factors.

Amino Acid Sequence↗

The structure of ribosomal protein S7 at 1.9 A resolution reveals a beta-hairpin motif that binds double-stranded nucleic acids.

BACKGROUND: Ribosomal protein S7, a crucial RNA-binding component of the ribosome, is one of two proteins that initiates assembly of the 30S ribosomal subunit. It is required for proper folding of a large 3' domain of 16S ribosomal RNA. S7 regulates its own synthesis by binding to its own mRNA. This ability of S7 to bind both messenger and ribosomal RNAs makes determination of its mode of RNA recognition particularly interesting. RESULTS: The crystal structure of S7 from Thermus thermophilus was determined by a two-wavelength anomalous diffraction experiment using the LIII edge of mercury. The S7 structure consists of a bundle of six helices and an extended beta hairpin between helices 3 and 4, with two or more RNA-binding sites on its surface. The hairpin, along with portions of helices 1, 4 and 6, forms a large, positively charged, concave surface that has the appropriate curvature and dimensions to bind double-stranded RNA. A second putative RNA-binding site comprises parts of loop 2 and the helix 4-loop 5 turn. CONCLUSIONS: Structural similarity between S7 and the IHF/HU family of proteins strongly suggests that the beta hairpin of S7 binds to a groove of double-stranded RNA. The beta hairpin of S7 is also similar to those from other nucleic acid binding proteins, such as ribosomal protein L14 and BIV Tat, suggesting that it belongs to an extended family of such motifs, all of which bind to a groove of double-stranded nucleic acid. The residues in S7 loop 2 that belong to the second putative RNA-binding site may have a role analogous to the N-terminal residues of IHF/HU which grip an unbent portion of double helix.

Amino Acid Sequence↗