PubMed Health⌕ Search

Biomedical subjects

B W Dijkstra

Publications and source records attributed to B W Dijkstra.

At least 91 records · Page 5Linked to original sources
PubMed1995

Site-directed mutations in tyrosine 195 of cyclodextrin glycosyltransferase from Bacillus circulans strain 251 affect activity and product specificity.

Tyrosine 195 is located in the center of the active site cleft of cyclodextrin glycosyltransferase (EC 2.4.1.19) from Bacillus circulans strain 251. Alignment of amino acid sequences of CGTases and alpha-amylases, and the analysis of the binding mode of the substrate analogue acarbose in the active site cleft [Strokopytov, B., et al. (1995) Biochemistry 34, (in press)], suggested that Tyr195 plays an important role in cyclization of oligosaccharides. Tyr195 therefore was replaced with Phe (Y195F), Trp (Y195W), Leu (Y195L), and Gly (Y195G). Mutant proteins were purified and crystallized, and their X-ray structures were determined at 2.5-2.6 angstrum resolution, allowing a detailed comparison of their biochemical properties and three-dimensional structures with those of the wild-type CGTase protein. The mutant proteins possessed significantly reduced cyclodextrin forming and coupling activities but were not negatively affected in the disproportionation and saccharifying reactions. Also under production process conditions, after a 45 h incubation with a 10% starch solution, the Y195W, Y195L, and Y195G mutants showed a lower overall conversion of starch into cyclodextrins. These mutants produced a considerable amount of linear maltooligosaccharides. The presence of aromatic amino acids (Tyr or Phe) at the Tyr195 position thus appears to be of crucial importance for an efficient cyclization reaction, virtually preventing the formation of linear products. Mass spectrometry of the Y195L reaction mixture, but not that of the other mutants and the wild type, revealed a shift toward the synthesis (in low yields) of larger products, especially of beta- and gamma- (but no alpha-) cyclodextrins and minor amounts of delta-, epsilon-, zeta- and eta-cyclodextrins.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗
PubMed1995

X-ray structure of cyclodextrin glycosyltransferase complexed with acarbose. Implications for the catalytic mechanism of glycosidases.

Crystals of cyclodextrin glycosyltransferase (CGTase) from Bacillus circulans strain 251 were soaked in buffer solutions containing the pseudotetrasaccharide acarbose, a strong amylase- and CGTase inhibitor. The X-ray structure of the complex was elucidated at 2.5-A resolution with a final crystallographic R value of 15.8% for all data between 8.0 and 2.5 A. Acarbose is bound near the catalytic residues Asp229, Glu257, and Asp328. The carboxylic group of Glu257 is at hydrogen bonding distance from the glycosidic oxygen in the scissile bond between the B and C sugars (residue A is at the nonreducing end of the inhibitor). Asp328 makes hydrogen bonds with the 4-amino-4,6-dideoxyglucose (residue B), and Asp229 is in a close van der Waals contact with the C1 atom of this sugar. From this we conclude that in CGTase Glu257 acts as the proton donor and Asp229 serves as the general base or nucleophile, while Asp328 is involved in substrate binding and may be important for elevating the pKa of Glu257. On the basis of these results it appears that the absence of the C6-hydroxyl group in the B sugar is responsible for the inhibitory properties of acarbose on CGTase. This suggests that the C6-hydroxyl group of this sugar plays an essential role in the catalytic mechanism of CGTase.(ABSTRACT TRUNCATED AT 250 WORDS)

Acarbose↗
PubMed1995

Crystallization and preliminary X-ray analysis of L-2-haloacid dehalogenase from Xanthobacter autotrophicus GJ10.

Haloacid dehalogenases are enzymes that cleave carbon-chlorine or carbon-bromine bonds of 2-haloalkanoates. X-ray-quality crystals of L-2-haloacid dehalogenase from the 1,2-dichloroethane-degrading bacterium Xanthobacter autotrophicus GJ10 have been grown at room temperature from 20% PEG 8000, 200 mM sodium formate at pH 6.8-7.0, using macroseeding techniques. The crystals, which diffract in the X-ray beam up to 2.0 A resolution, belong to the spacegroup C2221. Cell parameters are a = 58.8 A, b = 93.1 A, c = 84.2 A. A native data set to 2.3 A has been collected, with a completeness of 97% and an Rsym of 6.0%.

Crystallization↗
PubMed1995

The catalytic domain of a bacterial lytic transglycosylase defines a novel class of lysozymes.

The 70-kDa soluble lytic transglycosylase (SLT70) from Escherichia coli is a bacterial exo-muramidase that cleaves the cell wall peptidoglycan, producing 1,6-anhydro-muropeptides. The X-ray structure of SLT70 showed that one of its domains is structurally related to lysozyme, although there is no obvious similarity in amino acid sequence. To relate discrete structural features to differences in reaction mechanism and substrate/product specificity, we compared the three-dimensional structure of the catalytic domain of SLT70 with the structures of three typical representatives of the lysozyme superfamily: chicken-type hen egg-white lysozyme, goose-type swan egg-white lysozyme, and phage-type lysozyme from bacteriophage T4. We find a particularly close relationship between the catalytic domain of SLT70 and goose-type lysozyme, with not only a significant similarity in overall structure, but even a weak homology in amino acid sequence. This finding supports the notion that the goose-type lysozyme takes up a central position in the lysozyme superfamily and that it is structurally closest to the lysozyme ancestors. The saccharide-binding groove is the most conserved part in the four structures, but only two residues are absolutely preserved: the "catalytic" glutamic acid and a structurally required glycine. The "catalytic" aspartate is absent in SLT70, a difference that can be related to a different mechanism of cleavage of the beta-1,4-glycosidic bond. The unique composition of amino acids at the catalytic site, and the observation of a number of differences in the arrangements of secondary structure elements, define the catalytic domain of SLT70 as a novel class of lysozymes. Its fold is expected to be exemplary for other bacterial and bacteriophage muramidases with lytic transglycosylase activity.

Amino Acid Sequence↗
PubMed1994

Crystal structures of hevamine, a plant defence protein with chitinase and lysozyme activity, and its complex with an inhibitor.

BACKGROUND: Hevamine is a member of one of several families of plant chitinases and lysozymes that are important for plant defence against pathogenic bacteria and fungi. The enzyme can hydrolyze the linear polysaccharide chains of chitin and peptidoglycan. A full understanding of the structure/function relationships of chitinases might facilitate the production of transgenic plants with increased resistance towards a wide range of pathogens. RESULTS: The crystal structure of hevamine has been determined to a resolution of 2.2 A, and refined to an R-factor of 0.169. The enzyme possesses a (beta alpha)8-barrel fold. An inhibitor binding study shows that the substrate-binding cleft is located at the carboxy-terminal end of the beta-barrel, near the conserved Glu127. Glu127 is in a position to act as the catalytic proton donor, but no residue that might stabilize a positively charged oxocarbonium ion intermediate was found. A likely mechanism of substrate hydrolysis is by direct attack of a water molecule on the C1 atom of the scissile bond, resulting in inversion of the configuration at C1. CONCLUSIONS: The structure of hevamine shows a completely new lysozyme/chitinase fold and represents a new class of polysaccharide-hydrolyzing (beta alpha)8-barrel enzymes. Because the residues conserved in the family to which hevamine belongs are important for maintaining the structure of the (beta alpha)8-barrel, all members of the family, including fungal, bacterial and insect chitinases, are likely to share this architecture. The crystal structure obtained provides a basis for protein engineering studies in this family of chitinases.

Amino Acid Sequence↗
PubMed1994

Crystallization and preliminary crystallographic characterization of endo-polygalacturonase II from Aspergillus niger.

The endo-polygalacturonase II from Aspergillus niger has been crystallized from an ammonium sulfate solution by the hanging drop method. The crystals belong to the monoclinic space group P2(1), with cell dimensions a = 69.6 A, b = 152.6 A, c = 74.0 A and beta = 91.2 degrees with four molecules per asymmetric unit. The crystals diffract to at least 2.8 A resolution and are suitable for X-ray analysis.

Aspergillus niger↗
PubMed1994

Crystallization of enzyme IIB of the cellobiose-specific phosphotransferase system of Escherichia coli.

Crystals of enzyme IIB of the cellobiose-specific phosphotransferase system have been obtained from 15% polyethylene glycol 4000 using both streak-seeding and macroseeding techniques at 4 degrees. Crystals were grown with the hanging drop method of vapour diffusion. Addition of 2-propanol and benzamidine/HCl proved essential to obtain single crystals suitable for X-ray analysis. The crystals diffract to 1.8 A resolution and have the monoclinic space group P2(1), with cell dimensions a = 53.6 A, b = 31.7 A, c = 60.0 A and beta = 101.7 degrees. From a self-rotation function it seems likely that there are two molecules in the asymmetric unit related by a non-crystallographic 2-fold axis.

Cellobiose↗
PubMed1994

Crystallization and preliminary X-ray analysis of a lipase from Bacillus subtilis.

Single crystals of the lipase from Bacillus subtilis have been obtained using a mixture of polyethylene glycol 4000 and sodium sulphate solution as the precipitant. The crystals grow at room temperature in two to three weeks in the presence of n-octyl-beta-D-glucoside. They belong to the monoclinic space group C2 with a = 121.20 A, b = 93.19 A, c = 80.96 A, and beta = 110.67 degrees, with four protein molecules per asymmetric unit. The crystals diffract to at least 2.5 A resolution and are suitable for an X-ray structure analysis.

Bacillus subtilis↗
PubMed1994

Protein stabilization by hydrophobic interactions at the surface.

The contribution of the solvent-exposed residue 63 to thermal stability of the thermolysin-like neutral protease of Bacillus stearothermophilus was studied by analyzing the effect of twelve different amino acid substitutions at this position. The thermal stability of the enzyme was increased considerably by introducing Arg, Lys or bulky hydrophobic amino acids. In general, the effects of the mutations showed that hydrophobic contacts in this surface-located region of the protein are a major determinant of thermal stability. This observation contrasts with general concepts concerning the contribution of surface-located residues and surface hydrophobicity to protein stability and indicates new ways for protein stabilization by site-directed mutagenesis.

Bacterial Proteins↗
PubMed1994

Doughnut-shaped structure of a bacterial muramidase revealed by X-ray crystallography.

The integrity of the bacterial cell wall depends on the balanced action of several peptidoglycan (murein) synthesizing and degrading enzymes. Penicillin inhibits the enzymes responsible for peptide crosslinks in the peptidoglycan polymer. Enzymes that act solely on the glycosidic bonds are insensitive to this antibiotic, thus offering a target for the design of antibiotics distinct from the beta-lactams. Here we report the X-ray structure of the periplasmic soluble lytic transglycosylase (SLT; M(r) 70,000) from Escherichia coli. This unique bacterial exomuramidase cleaves the beta-1,4-glycosidic bonds of peptidoglycan to produce small 1,6-anhydromuropeptides. The structure of SLT reveals a 'superhelical' ring of alpha-helices with a separate domain on top which resembles the fold of lysozyme. Site-directed mutagenesis and a crystallographic inhibitor-binding study confirmed that the lysozyme-like domain contains the active site of SLT.

Binding Sites↗
PubMed1994

Nucleotide sequence and X-ray structure of cyclodextrin glycosyltransferase from Bacillus circulans strain 251 in a maltose-dependent crystal form.

The cyclodextrin glycosyltransferase (CGTase, EC 2.4.1.19) gene from Bacillus circulans strain 251 was cloned and sequenced. It was found to code for a mature protein of 686 amino acid residues, showing 75% identity to the CGTase from B. circulans strain 8. The X-ray structure of the CGTase was elucidated in a maltodextrin-dependent crystal form and refined against X-ray diffraction data to 2.0 A resolution. The structure of the enzyme is nearly identical to the CGTase from B. circulans strain 8. Three maltose binding sites are observed at the protein surface, two in domain E and one in domain C. The maltose-dependence of CGTase crystallization can be ascribed to the proximity of two of the maltose binding sites to intermolecular crystal contacts. The maltose molecules bound in the E domain interact with several residues implicated in a raw starch binding motif conserved among a diverse group of starch converting enzymes.

Amino Acid Sequence↗
PubMed1994

'Holy' proteins. II: The soluble lytic transglycosylase.

Enzymes involved in the metabolism of the bacterial cell wall peptidoglycan are excellent targets for antibiotics. Penicillins and related beta-lactam antibiotics inhibit the enzymes that act on the peptide cross-links of the peptidoglycan. The X-ray structure of the transglycosylase revealed a two-layered ring of alpha-helices in a right-handed superhelical arrangement with a separate catalytic domain on top, which resembles the fold of goose-type lysozyme. Three sequence motifs were found that characterize the catalytic and substrate-binding sites in the enzyme. These motifs are present in a broad family of muramidases and chitinases.

Amino Acid Sequence↗
PubMed1994

Bacterial lipases.

Many different bacterial species produce lipases which hydrolyze esters of glycerol with preferably long-chain fatty acids. They act at the interface generated by a hydrophobic lipid substrate in a hydrophilic aqueous medium. A characteristic property of lipases is called interfacial activation, meaning a sharp increase in lipase activity observed when the substrate starts to form an emulsion, thereby presenting to the enzyme an interfacial area. As a consequence, the kinetics of a lipase reaction do not follow the classical Michaelis-Menten model. With only a few exceptions, bacterial lipases are able to completely hydrolyze a triacylglycerol substrate although a certain preference for primary ester bonds has been observed. Numerous lipase assay methods are available using coloured or fluorescent substrates which allow spectroscopic and fluorimetric detection of lipase activity. Another important assay is based on titration of fatty acids released from the substrate. Newly developed methods allow to exactly determine lipase activity via controlled surface pressure or by means of a computer-controlled oil drop tensiometer. The synthesis and secretion of lipases by bacteria is influenced by a variety of environmental factors like ions, carbon sources, or presence of non-metabolizable polysaccharides. The secretion pathway is known for Pseudomonas lipases with P. aeruginosa lipase using a two-step mechanism and P. fluorescens lipase using a one-step mechanism. Additionally, some Pseudomonas lipases need specific chaperone-like proteins assisting their correct folding in the periplasm. These lipase-specific foldases (Lif-proteins) which show a high degree of amino acid sequence homology among different Pseudomonas species are coded for by genes located immediately downstream the lipase structural genes. A comparison of different bacterial lipases on the basis of primary structure revealed only very limited sequence homology. However, determination of the three-dimensional structure of the P. glumae lipase indicated that at least some of the bacterial lipases will presumably reveal a conserved folding pattern called the alpha/beta-hydrolase fold, which has been described for other microbial and human lipases. The catalytic site of lipases is buried inside the protein and contains a serine-protease-like catalytic triad consisting of the amino acids serine, histidine, and aspartate (or glutamate). The Ser-residue is located in a strictly conserved beta-epsilon Ser-alpha motif. The active site is covered by a lid-like alpha-helical structure which moves away upon contact of the lipase with its substrate, thereby exposing hydrophobic residues at the protein's surface mediating the contact between protein and substrate.(ABSTRACT TRUNCATED AT 400 WORDS)

Amino Acid Sequence↗
PubMed1993

Topological characterization and modeling of the 3D structure of lipase from Pseudomonas aeruginosa.

Lipase from Pseudomonas aeruginosa is a M(r) 29 kDa protein with a single functional disulfide bond as shown by a shift in electrophoretic mobility after treatment with dithiothreitol and iodoacetamide. Limited proteolysis of lipase with Staphylococcus aureus protease V8 resulted in cleavage after amino acid residues Asp38 and Glu46. Comparison of the lipase amino acid sequence with those of other hydrolases with known 3D structures indicated that the folding pattern might be compatible with the alpha/beta hydrolase fold, thereby allowing us to construct a 3D model which fitted the biochemical properties. The model predicts a catalytic triad consisting of Ser82, Asp229 and His251, and contains a disulfide bond connecting residues Cys183 and Cys235. Residues Asp38 and Glu46 are located at the surface of the enzyme, whereas the disulfide bond is rather inaccessible, which is in agreement with the finding that the protein needed to be partly unfolded before a reduction of the disulfide bond could take place. A striking prediction from the model was the lack of a lid-like alpha-helical loop structure covering the active site which confers to other well-characterized lipases a unique property known as interfacial activation. Experimental determination of lipase activity under conditions where the substrate existed either as monomeric solutions or aggregates confirmed the absence of interfacial activation.

Amino Acid Sequence↗
PubMed1993

Crystallographic and fluorescence studies of the interaction of haloalkane dehalogenase with halide ions. Studies with halide compounds reveal a halide binding site in the active site.

Haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 catalyzes the conversion of 1,2-dichloroethane to 2-chloroethanol and chloride without use of oxygen or cofactors. The active site is situated in an internal cavity, which is accessible from the solvent, even in the crystal. Crystal structures of the dehalogenase enzyme complexed with iodoacetamide, chloroacetamide, iodide, and chloride at pH 6.2 and 8.2 revealed a halide binding site between the ring NH's of two tryptophan residues, Trp-125 and Trp-175, located in the active site. The halide ion lies on the intersection of the planes of the rings of the tryptophans. The binding of iodide and chloride to haloalkane dehalogenase caused a strong decrease in protein fluorescence. The decrease could be fitted to a modified form of the Stern-Volmer equation, indicating the presence of fluorophors of different accessibilities. Halide binding was much stronger at pH 6.0 than at pH 8.2. Assuming ligand binding to Trp-125 and Trp-175 as the sole cause of fluorescence quenching, dissociation constants at pH 6.0 with chloride and iodide were calculated to be 0.49 +/- 0.04 and 0.074 +/- 0.007 mM, respectively. Detailed structural investigation showed that the halide binding site probably stabilizes the halide product as well as the negatively charged transition state occurring during the formation of the covalent intermediate.

Acetamides↗
PubMed1993

Crystal structure of a porcine pancreatic phospholipase A2 mutant. A large conformational change caused by the F63V point mutation.

The highly homologous bovine and porcine pancreatic phospholipase A2 (85% amino acid residue identity) show a large conformational difference in the loop from residue 59 to 71. In bovine phospholipase A2 residues 59 to 66 adopt an alpha-helix conformation, while residues 67 to 71 are in a surface loop. Residues 59 to 66 in the porcine enzyme have a random coil conformation, and residues 67 to 71 form a short 3(10)-helix. It has been suggested that most probably this conformational difference is caused by the substitution Val63 (bovine) to Phe63 (porcine) in the otherwise invariant loop 59 to 70. To test this hypothesis, a mutant porcine phospholipase A2 was constructed in which residue Phe63 was replaced by a Val. The activity of this F63V mutant towards aggregated substrates was about half the activity of wild-type porcine phospholipase A2, but significantly different from that of the bovine enzyme. The affinity for zwitterionic interfaces was found to be intermediate between porcine and bovine phospholipase. The mutation did not have any effect on the stability of the enzyme towards denaturation by guanidine.HCl. The F63V mutant was crystallized in space group P2(1)2(1)2(1) with cell dimensions a = 79.88 A, b = 65.23 A, c = 52.62 A, with two molecules per asymmetric unit. Its three-dimensional structure was solved by molecular replacement methods, and refined to a crystallographic R-factor of 17.6% for all data between 10 and 2.2 A resolution. In one molecule the 58 to 71 loop is in very weak density, suggesting a high degree of disorder or flexibility. The conformation of the same loop in the other molecule could be determined unambiguously. It shows a conformation which resembles more that of bovine phospholipase A2 than that of porcine phospholipase. It is concluded that indeed the single F63V substitution causes a dramatic conformational change.

Amino Acid Sequence↗
PubMed1993

Refined X-ray structures of haloalkane dehalogenase at pH 6.2 and pH 8.2 and implications for the reaction mechanism.

The crystal structure of haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 has been refined at 1.9 A resolution at two different pH values, the pH of crystallization (pH 6.2) and the pH of optimal activity (pH 8.2), to final R-factors of 16.8% and 16.4%, respectively. Both models show good stereochemical quality. Two non-glycine residues have main-chain torsion angles that are located outside the "allowed" regions in a Ramachandran plot. One of them is the nucleophilic residue Asp124, which, together with the two other active site residues His289 and Asp260, is situated in an internal, predominantly hydrophobic cavity. The other residue, Asn148, helps stabilize the conformations of two of these active-site residues, Asp124 and Asp260. Comparison of the models at pH 6.2 and pH 8.2 revealed one major structural difference. At pH 6.2, a salt-bridge is present between the N epsilon 2 atom of His289 and the O delta 1 atom of Asp124, while at pH 8.2, this salt-bridge is absent, indicating that the N epsilon 2 atom of the histidine residue is mostly deprotonated at the pH of optimum activity. This is in agreement with the putative reaction mechanism in which the O delta 1 atom of Asp124 performs a nucleophilic attack on the substrate, resulting in an intermediate ester. This ester is subsequently cleaved by a hydrolytic water molecule. The high-resolution data sets clearly show the exact position of this water molecule. It is in an ideal position for donating a proton to the N epsilon 2 atom of His289 and subsequently cleaving the covalently bound intermediate ester, releasing the alcohol product. Detailed investigation of both refined models showed a number of unusual structural features. Four out of 11 helices contain an internal proline residue other than in the first turn. Two other alpha-helices have adopted in their central part a 3(10) conformation. A novel four-residue turn between a helix and a strand, the alpha beta 4 turn, is located at the site of the bend in the central eight-stranded beta-sheet of the dehalogenase structure.

Amino Acid Sequence↗