PubMed Health⌕ Search

Biomedical subjects

Barry R Lutz

Publications and source records attributed to Barry R Lutz.

3 recordsLinked to original sources

Hydrodynamic tweezers: 1. Noncontact trapping of single cells using steady streaming microeddies.

A key need for dynamic single-cell measurements is the ability to gently position cells for repeated measurements without perturbing their behavior. We describe a new method that uses a gentle secondary flow to trap and suspend single cells, including motile cells, at predictable locations in 3-D. Trapped cells can be more dense or less dense than the surrounding medium. The cells are suspended without surface contact in one of four steady streaming eddies created by audible-frequency fluid oscillation (< or =1000 Hz) in a microchannel containing a single fixed cylinder (radius = 125 microm). Comparison of measured trap locations to computations of the eddy flow show that each trap is located near the eddy center, and the location is controlled via the oscillation frequency. We use the motile phytoplankton cell (Prorocentrum micans) to experimentally measure the trapping force, which is controlled via the oscillation amplitude. Trapping forces up to 30 pN are generated while exerting moderate shear stresses (shear stresses < or = 1.5 N/m2) on the trapped cell. The magnitude of this trapping force is comparable to that of optical tweezers or dielectrophoretic traps, without requiring an external field outside the physiological range for cells (the shear stresses are comparable to those found in arterial blood flow). The unique combination of predictable 3-D positioning, insensitivity to cell and medium properties, strong adjustable trapping forces, and a gentle fluid environment makes hydrodynamic tweezers a promising new option for noncontact trapping of single cells in suspension.

Animals↗

Characterizing homogeneous chemistry using well-mixed microeddies.

Well-mixed reaction volumes are often sought in engineered microchemical devices and can be an important feature of naturally occurring physicochemical processes such as pitting corrosion. Steady streaming eddies can serve as well-mixed, easily controlled microliter chemical reactors for characterizing homogeneous chemical reactions. Here, steady streaming eddies are produced by oscillating a liquid-filled cuvette around a stationary cylindrical electrode (radius 406 microm, length 1.6 cm) at audible frequencies (75 Hz). Oxidant (ferricyanide) electrochemically dosed at small rates (<or=30 nmol/s) from the cylindrical electrode accumulates to millimolar concentrations within the closed streamlines of each eddy, where it mixes and reacts with an antioxidant (vitamin C) present in the bulk solution. The composition in the eddy is controlled by varying the oxidant dosing rate and the bulk antioxidant concentration (<or=10 mM), as well as the cuvette oscillation amplitude. A simple algebraic mole balance is combined with Raman spectroscopy measurements of oxidant concentration in the eddy and bulk to determine the reaction rate law and homogeneous rate constant (45 +/- 9 M(-1) s(-1)) for the antioxidant properties of vitamin C against ferricyanide. Numerical solutions to the full Navier-Stokes equations and species continuity equations illustrate the distribution of species during the reaction and general limitations to the assumption of a well-mixed eddy.

Journal Article↗

Microfluidics without microfabrication.

Microfluidic devices create spatially defined, chemically controlled environments at microscopic dimensions. We demonstrate the formation and control of microscopic hydrodynamic and chemical environments by impinging a low-intensity acoustic oscillation on a cylindrical electrode. The interaction of small-amplitude (< or =203 microm), low-frequency (< or =515 Hz) fluid oscillations with a submillimeter cylinder creates four microscopic eddies that circulate adjacent to the cylinder. This steady flow is known as acoustic streaming. Because the steady circulation in the eddies has closed streamlines, reagent dosed from the electrode can escape the eddies only by slow molecular diffusion. As a result, reagent dosing rates of 10 nmol/s produce eddy concentrations as high as 8 mM, without a correspondingly large rise in bulk solution composition. Imaging Raman spectroscopy is used to visualize the eddy concentration distribution for various acoustic oscillation conditions, and point Raman spectra are used to quantify eddy compositions. These results, and corresponding numerical simulations, show that each eddy acts as a microchemical trap with size determined by acoustic frequency and the concentration tuned via reagent dosing rate and acoustic amplitude. Low-intensity acoustic streaming flows can serve as microfluidic elements without the need for microfabrication.

Journal Article↗