Biomedical subjects
Publications and source records attributed to Bartosz A Grzybowski.
Mixtures of oppositely charged nanoparticles of various sizes and charge ratios precipitate only at the point of electroneutrality. This phenomenon-specific to the nanoscale and reminiscent of threshold precipitation of ions-is a consequence of the formation of core-and-shell nanoparticle aggregates, in which the shells are composed of like-charged particles and are stabilized by efficient electrostatic screening.
Explore the source record for details and available documents.
Self-assembly of charged, equally sized metal nanoparticles of two types (gold and silver) leads to the formation of large, sphalerite (diamond-like) crystals, in which each nanoparticle has four oppositely charged neighbors. Formation of these non-close-packed structures is a consequence of electrostatic effects specific to the nanoscale, where the thickness of the screening layer is commensurate with the dimensions of the assembling objects. Because of electrostatic stabilization of larger crystallizing particles by smaller ones, better-quality crystals can be obtained from more polydisperse nanoparticle solutions.
Dynamic self-assembly (DySA) processes occurring outside of thermodynamic equilibrium underlie many forms of adaptive and intelligent behaviors in natural systems. Relatively little, however, is known about the principles that govern DySA and the ways in which it can be extended to artificial ensembles. This article discusses recent advances in both the theory and the practice of nonequilibrium self-assembly. It is argued that a union of ideas from thermodynamics and dynamic systems' theory can provide a general description of DySA. In parallel, heuristic design rules can be used to construct DySA systems of increasing complexities based on a variety of suitable interactions/potentials on length scales from nanoscopic to macroscopic. Applications of these rules to magnetohydrodynamic DySA are also discussed.
Electrostatic aggregation of oppositely charged silver and gold nanoparticles leads to the formation of core-shell clusters in which the shell is formed by the nanoparticles, which are in excess. Arguments based on Debye screening of interactions between like-charged particles help explain why these clusters are stable despite possessing net electric charge. The core-shell aggregates exhibit unusual optical properties with the resonance absorption of the shell particles enhanced by the particles in the core and that of the core suppressed by the shell. Experimental UV-vis absorption spectra are faithfully reproduced by Mie theory. The modeling allows for estimation of the numbers of particles forming the shell and of the shell's effective thickness. These theoretical predictions are substantiated by experiments using nanoparticles covered with different combinations of charged groups and performed at different values of pH.
Arrays of surface wrinkles of linearly increasing heights (from tens of nanometers to tens of micrometers) were prepared via a spontaneous reaction-diffusion process based on periodic precipitation. The slopes, dimensions, and positions of the precipitation bands could be controlled precisely by adjusting the concentrations of the participating chemicals as well as the material properties of patterned substrates. Additional control of periodic precipitation by localized UV irradiation allowed for the preparation of discontinuous and curvilinear structures. The nonbinary 3D surface topographies were replicated into poly(dimethylsiloxane), and the applications of replicas in microfluidics, microseparations, and cell biology have been suggested.
Arrays of chemical oscillators are micropatterned by Wet Stamping. The technique is used to demonstrate that chemical waves can be initiated and controlled in oscillatory systems and that such waves can give rise to phenomena not observed in excitable media. Interoscillator coupling and synchronization, kinetic autofocusing, and twist-symmetry breaking are a consequence of the dependence of the oscillation phase on the local concentrations of reagents and on systems' geometry. Conditions under which a generic oscillatory system would exhibit such behaviors are determined.
Explore the source record for details and available documents.
Kinetics of charge transfer between metals and polymers was studied using an analytical rolling-sphere tool. The rates of charge transfer were related to the area of contact between contacting surfaces and the tunneling current between them. The derived rate equations accounted for the experimentally observed sigmoidal charging curves. Furthermore, for a model system of steel spheres rolling on modified polystyrene supports, it was shown that the magnitudes of separated charges can be varied by adjusting the polymer's surface properties and/or ambient conditions.
A reaction-diffusion process induced from a micronetwork geometry amplifies changes in the molecular structure of a thin gel film into macroscopic readout patterns. When the gel undergoes a helix-to-coil phase transition, the patterns formed by RD switch from symmetry-broken to symmetric ones. Theoretical analysis explains how the system reconfigures internally in response to mass transfer between the applied network and the probed film.
Hydrogel stamps are used to reactively micropattern various types of substrates. The method, called reactive wet stamping (r-WETS), is general in nature and overcomes several limitations of conventional soft-lithographic techniques. Illustrative applications of r-WETS in surface wettability modification, deposition of metallic microstructures, preparation of supports for electrostatic self-assembly, and multistep reactive patterning are discussed.
Liesegang rings refract and reflect at the interface between the regions of the same gel but of different thickness. The incident and the refracted rings obey a refraction law analogous to the Snell's law of classical optics, with a reverse of the spacing coefficient being a counterpart of the refraction index. The wavelike behavior of the rings at the interface is explained by geometrical arguments derived from the Jablczynski's spacing principle, and is reproduced in numerical simulations based on a three-dimensional minimalistic version of the nucleation-growth model.
A new experimental technique is described that uses reaction--diffusion phenomena as a means of one-step microfabrication of complex, multilevel surface reliefs. Thin films of dry gelatin doped with potassium hexacyanoferrate are chemically micropatterned with a solution of silver nitrate delivered from an agarose stamp. Precipitation reaction between the two salts causes the surface to deform. The mechanism of surface deformation is shown to involve a sequence of reactions, diffusion, and gel swelling/contraction. This mechanism is established experimentally and provides a basis of a theoretical lattice-gas model that allows prediction surface topographies emerging from arbitrary geometries of the stamped features. The usefulness of the technique is demonstrated by using it to rapidly prepare two types of mold for passive microfluidic mixers.
Micropatterning approaches using self-assembled monolayers of alkyl thiols on gold are not optimal for important imaging modalities in cell biology because of absorption of light and scattering of electrons by the gold layer. We report here an anisotropic solid microetching (ASOMIC) procedure that overcomes these limitations. The method allows molecular dynamics imaging by wide-field and total internal reflection fluorescence (TIRF) microscopy of living mammalian cells and correlative platinum replica electron microscopy.
Micropatterning of surfaces with several chemicals at different spatial locations usually requires multiple stamping and registration steps. Here, we describe an experimental method based on reaction-diffusion phenomena that allows for simultaneous micropatterning of a substrate with several coloured chemicals. In this method, called wet stamping (WETS), aqueous solutions of two or more inorganic salts are delivered onto a film of dry, ionically doped gelatin from an agarose stamp patterned in bas relief. Once in conformal contact, these salts diffuse into the gelatin, where they react to give deeply coloured precipitates. Separation of colours in the plane of the surface is the consequence of the differences in the diffusion coefficients, the solubility products, and the amounts of different salts delivered from the stamp, and is faithfully reproduced by a theoretical model based on a system of reaction-diffusion partial differential equations. The multicolour micropatterns are useful as non-binary optical elements, and could potentially form the basis of new applications in microseparations and in controlled delivery.
This paper begins with a survey of both passive and active microfluidic mixers that have been implemented in recent years. It then describes a micromixing device based on dynamic self-assembly. This device is easy to fabricate and has excellent working characteristics in the continuous-flow mode. The paper concludes with a brief discussion of possible applications of self-assembly in microfluidics.
We describe an analytical system for in situ measurement of the charge that develops by contact electrification when a ferromagnetic sphere rolls on the surface of a polymer. This system makes it possible to survey the ability of polymeric surfaces to charge by contact electrification. Because the measurement of charge using this tool does not require physical contact of the charged sphere with the measuring electrode, it also enables the kinetics of charging to be examined. The research has focused on the contact charging of spheres having a core-and-shell geometry (a common core of ferromagnetic steel, and a variable shell of thin films of metals, or metals with surface oxides) rolling on the surface of polymeric slabs; it has generated an internally consistent set of data that include the polarity and magnitude of charging for a homologous series of polymers that differ chemically in the pendant group on a polyethylene backbone.
This paper describes a dynamic system-a system that develops order only when dissipating energy-comprising millimeter to centimeter scale gears that self-assemble into a simple machine at a fluid/air interface. The gears are driven externally and indirectly by magnetic interactions; they are made of poly(dimethylsiloxane) (PDMS) or magnetically doped PDMS, and fabricated by soft lithography. Transfer of torque between gears can take place through three different mechanisms: mechanical interaction, hydrodynamic shear, and capillarity/overlap of menisci. Interplay between these forces allows interactions and motions that are not possible with conventional systems of gears.