Biomedical subjects

Behnoush Rashedi

Publications and source records attributed to Behnoush Rashedi.

14 recordsLinked to original sources

PubMed2005

Predoctoral implant education in U.S. dental schools.

PURPOSE: In 2002, a survey of American dental schools was conducted to determine the curricular structure, teaching philosophies, and materials used in predoctoral implant dentistry courses. MATERIALS AND METHODS: The questionnaire was mailed to the predoctoral implant dentistry director/chairperson of 54 U.S. dental schools. Of these, 38 schools returned the completed survey resulting in a response rate of 70%. RESULTS: Eighty-four percent of the respondents indicated that an implant dentistry course is part of their school's requirements. Seventy percent indicated that this course is offered by either the Restorative or Prosthodontics Department in the third year of the predoctoral dental curriculum. For 75% of the schools, the duration of the course ranged from 3 to 6 months (mean of 5.5 months), 57% reported offering between 11 and 20 lecture hours (mean of 20.4 hours), and less than half of the schools (41%) have prosthodontists teaching the predoctoral implant dentistry course. In 78% of the schools, a laboratory course is offered in conjunction with the implant course. The majority of the schools (88%) allow predoctoral students to restore implant cases clinically. Seventy-three percent require some of the implant-related laboratory work to be completed by the students and the single-tooth implant restoration is the most popular type of implant restoration for 78% of the schools. CONCLUSIONS: Predoctoral implant dentistry educational programs vary from school to school, yet a large percentage of schools agree on certain topics.

Curriculum↗

PubMed2005

Complete denture education in U.S. dental schools.

PURPOSE: In 2001, a survey of U.S. dental schools was conducted to determine curricular content, teaching philosophies, and techniques used in clinical complete denture programs. MATERIALS AND METHODS: The questionnaire was mailed to the chairperson of the prosthodontic/restorative department of 54 U.S. dental schools. Of these, 44 schools returned the completed survey, resulting in a response rate of 82%. The mean, median, and range of responses were computed where applicable. RESULTS: Results from this survey show that a large majority of schools are using similar materials in clinical complete denture treatment: irreversible hydrocolloid for preliminary impression (87%); light-cured composite resin for record base fabrication (70%); a semiadjustable articulator (98%); and semianatomic posterior tooth form used exclusively or in combination with other tooth forms (75%). In addition, a large majority of schools are using similar techniques in clinical complete denture treatment: use of a protrusive record (80%); use of extra-oral measurements, speech, and esthetics for establishing the occlusal vertical dimension (59%); use of the conventional compression molding method for processing complete dentures (82%); occlusal equilibration and face-bow preservation (75%); and the clinical remount procedure (91%). A quality control program is present for cases sent to and returned from the laboratory in 73% and 84% of responding schools, respectively. CONCLUSIONS: Clinical complete denture predoctoral programs vary from school to school, yet a large percentage of schools agree on many topics. Only 55% of schools reported incorporating new educational materials such as the use of dental implants and treatment of patients with implant-retained overdentures at the predoctoral level. Sixteen percent are allowing students to graduate without a set number of required complete dentures as has traditionally been the case. Sixteen percent are using newer techniques such as injection molding and microwave processing technique in addition to the conventional processing technique.

Curriculum↗

PubMed2004

Immediate loading of implants in edentulous mandible maintaining vertical dimension: A clinical report.

Clinical treatments that provide immediate prostheses after implant placement pose a challenge to prosthodontists. This clinical report describes retaining 1 tooth for maintaining the vertical dimension of occlusion in the process of immediate loading of implants in the edentulous mandible. This process assisted in the patient's adaptation to the interim removable partial denture and ensured the maintenance of the vertical dimension of occlusion during all aspects of therapy.

Adaptation, Physiological↗

PubMed2003

Tuned aperture computed tomography (TACT) for cross-sectional implant site assessment in the posterior mandible.

PURPOSE: This study was designed to optimize a new radiographic modality known as tuned aperture computed tomography (TACT) for cross-sectional imaging of implant sites in human dry mandibles. MATERIALS AND METHODS: Five imaging modalities were compared for image quality and measurement accuracy: (1) conventional hypocycloidal tomograms, (2) TACT images reconstructed using the average method produced using a linear x-ray source movement, (3) TACT images reconstructed using the average method produced using a multidirectional x-ray source movement, (4) minimally reconstructed TACT images without a fiducial marker at the site of interest, and (5) minimally reconstructed TACT images with a fiducial marker at the site of interest. RESULTS: The extended Mantel-Haenszel mean score statistic was used to investigate the influence of modality on subjective image quality. A statistically significant difference for certain types of TACT images and multidirectional tomography (P < 0.0001) was observed. Linear TACT and multmin TACT were rated as significantly better than other image modalities (P < 0.0009), whereas multidirectional tomography was rated as being significantly worse than other radiographic modalities (P < 0.0001). For the quantitative assessment, data were normalized and analyzed statistically through a paired-comparisons t test. For each modality, the accuracy for maximum height and height was significantly different from ground truth (P < 0.05). CONCLUSION: The qualitative data suggest that visibility of structures important to the choice of implant location and dimension were seen better with certain TACT methods. Quantitative differences from ground truth (actual measurements of the bone-absolute truth) were clinically negligible. TACT appears to offer the potential of superior image quality over the status quo.

Anatomy, Cross-Sectional↗

PubMed2003

Preclinical removable partial dentures curriculum survey.

PURPOSE: In 2001, a survey of U.S. dental schools was conducted to determine the curricular structure, teaching philosophies, and techniques used in preclinical removable partial denture (RPD) courses and to also establish what newer educational techniques and materials are currently being used by U.S. dental schools. MATERIALS AND METHODS: The questionnaire was mailed to the chairpersons of the prosthodontic/restorative departments of 54 U.S. dental schools. Of these, 43 schools returned the completed survey, resulting in a response rate of 80%. The mean, median, and range of responses were computed where applicable. RESULTS: Results from this survey show that the mean student-to-faculty ratio in the preclinical RPD course was 12:1, with a median of 10:1 and a range of 6:1 to 27:1. The mean number of laboratory hours was 55, with a median of 50 and a range of 13.5 to 120. The mean number of lecture hours reported was 21, with a median of 20.5 and a range 10 to 60. The mean number of practical examinations was 2, with a median of 3 and a range of 0 to 8. The mean number of written examinations given was 2, with a median of 2 and a range of 1 to 6. Ninety-five percent of the schools have prosthodontists teaching this course. The mean number of months that this course is taught is 4.4 months, with a median of 4 and a range of 1.5 to 10. Fifty-five percent of the schools used the Hanau semiadjustable articulator. One hundred percent of the schools teach students to use a surveyor when designing an RPD, and 84% percent of the schools teach the Krol or the Kratochvil RPI design or a combination of the 2 designs. CONCLUSIONS: Preclinical RPD educational programs vary from school to school, yet a large percentage of schools agree on certain topics. Only 19% of dental schools are incorporating new technologies, such as the use of the internet, in their preclinical RPD curriculum.

Curriculum↗

PubMed2003

Survey of recently board-certified prosthodontists on the board certification process. Part 1: Demographics.

PURPOSE: A survey of recently board-certified prosthodontists was conducted in 2001. The purpose of this survey was to identify trends that assisted candidates in attaining diplomate status. MATERIALS AND METHODS: A questionnaire was mailed to 176 diplomates who had become board certified between the years 1993 and 2001. Of these, 131 board-certified prosthodontists returned the completed survey, resulting in a response rate of 74%. The mean, median, and range of responses were computed when applicable. RESULTS: Results from this survey show that the mean number of years from completion of a postdoctoral program to achieving board certification was 6 years, with a median of 4 years and a range of 1 to 23 years. The mean number of years from the time of completion of a postdoctoral program to board eligibility was 2.3 years, with a median of 1 year and a range of 0 to 22 years. The mean number of years from board eligibility to board certification was 3.9 years, with a median of 3 years and a range of 0 to 17 years. The military was the most frequently reported employment status at the time the respondents took Parts 1-4 of the boards. A total of 54% of the diplomates reported that they challenged Part 1 separately, and then challenged Parts 2, 3, and 4 together; 79% of the diplomates were encouraged by their graduate program director/faculty to challenge the board; and 48% of the diplomates reported that their patients received free dental treatment. CONCLUSIONS: Certain trends were observed regarding diplomates who succeeded in their efforts to challenge the board examination. The largest group who challenged the board certification examinations comprised members of the armed forces. Most prosthodontists challenged Part 1 before challenging the remaining 3 parts. In an effort to encourage more prosthodontists to challenge the board examination, numerous changes were made between 1992 and 1998; however, most of the diplomates did not take advantage of those changes.

Certification↗

PubMed2003

Prosthodontic treatment with implant fixed prosthesis for a patient with ectodermal dysplasia: a clinical report.

Oral characteristics of ectodermal dysplasia (ED) include hypodontia or anodontia of the primary or permanent teeth, impacted teeth, malformed and widely spaced peg-like teeth, and underdeveloped alveolar ridges. Patients with this disease often need a multidisciplinary approach to treatment planning and dental treatment to regain appropriate function, esthetics, and comfort. The definitive treatment plan may include removable, fixed, or implant-supported prostheses or a combination of these options. Depending on the remaining available alveolar bone and the pattern of missing teeth, the ideal treatment option for an adult ED patient often includes the use of implants. This clinical report describes the multidisciplinary approach to diagnosis and treatment of ED in a 37-year-old woman. The treatment included a mandibular implant-supported fixed denture and a maxillary conventional overdenture fabricated to establish acceptable occlusal vertical dimension, esthetics, and oral function.

Adult↗

PubMed2003

Survey of recently board-certified prosthodontists on the board-certification process. Part 2: Preparation and impact.

PURPOSE: A 2-part survey of recently board-certified prosthodontists was conducted in 2001. The first part of the survey, published in June 2003, determined the trends that assisted the candidates in attaining diplomate status. The second part of the survey was done to determine the preparation methods and resources used to prepare for the examination, the most difficult part of the examination, the most gratifying aspect of becoming board-certified, their current employment status, and whether board certification had any positive impact on their employment. MATERIALS AND METHODS: A questionnaire was mailed to 176 diplomates who had become board certified between the years 1993-2001. Of these, 131 board-certified prosthodontists returned the completed survey, resulting in a response rate of 74%. RESULTS: Results from this survey showed that 91% of the diplomates had taken the American College of Prosthodontists (ACP) Board Preparation course; most of the diplomates (41%) prepared for the boards by reviewing prosthodontic literature, reading textbooks, using the ACP Study Guide, and seeking the help of other board-certified prosthodontists; 89% of the diplomates felt that achieving board certification had a positive influence in their employment; 39% of the diplomates indicated that Part 2 of the examination was the most difficult to prepare for, and 41% indicated that Part 2 was the most difficult section; the majority of diplomates (31%) were employed by the military, and the most gratifying aspect of becoming board-certified was personal accomplishment (83%). CONCLUSIONS: Trends were observed regarding prosthodontists who succeeded with their efforts to challenge the board examination. The majority of the diplomates were employed by the military. Most of the respondents indicated that they took the ACP Board Preparation course and found it helpful. The largest percentage of respondents reported that Part 2 was both the most difficult part to prepare for, as well as the most difficult to complete. The most gratifying aspect of becoming board-certified was personal accomplishment.

Achievement↗

PubMed2003

Current concepts for determining the postpalatal seal in complete dentures.

PURPOSE: In 2001, a survey of U.S. dental schools was conducted to determine the concepts and techniques used for establishing the postpalatal seal (PPS) in a predoctoral dental curriculum. MATERIALS AND METHODS: The questionnaire was mailed to the chairperson of the prosthodontic/restorative departments of 54 U.S. dental schools. Of these, 44 returned the completed survey, resulting in a response rate of 82%. RESULTS: Results from this survey show that 80% of the schools are teaching a combination of phonation with other methods for locating the vibrating line. The 1 vibrating line concept for establishing the PPS is taught by 80% of schools; 77% of these schools locate the posterior termination of the maxillary denture on the vibrating line. Carving the PPS in the maxillary master cast is taught by 95% of the schools. Most of the schools teach the students to carve the PPS to a depth of 1.0-1.5 mm in the maxillary master cast. Compressibility of the palatal tissues is a consideration during PPS carving for 91% of the schools. The butterfly pattern is the most frequently (75%) described pattern for PPS carving. CONCLUSIONS: There is some variability from school to school on performing the PPS in the maxillary denture, although some trends are evident.

Curriculum↗

PubMed2003

Current concepts and techniques in complete denture final impression procedures.

PURPOSE: In 2001, a survey of U.S. dental schools was conducted to determine which concepts, techniques and materials are currently prevalent in the teaching of final impression procedures for complete dentures in the predoctoral clinical curriculum. MATERIALS AND METHODS: The questionnaire was mailed to the chairperson of the prosthodontic/restorative departments of 54 U.S. dental schools. Of these, 44 schools returned the completed survey resulting in a response rate of 82%. RESULTS: Results from this survey show that the majority of schools (71%) teach the selective-pressure technique for final impression making; the majority of the schools (64%) use modeling plastic impression compound for border molding the final impression tray; 39% of the schools do not place vent holes in the final impression tray, 30% of schools place more than one hole and 27% place one hole only; the majority of the schools (98%) are using custom trays for final impressions. Ninety-eight percent of the schools are border molding the custom tray and 70% of schools are using a visible light-cured (VLC) composite resin material to make the trays. Thirty-six percent of the schools are teaching the Boucher impression technique and 34% are teaching the modified Boucher impression technique. CONCLUSIONS: Predoctoral clinical complete denture educational programs agree on many aspects of final impression making, however, there is variability in their teachings regarding the impression philosophy and the materials used.

Composite Resins↗

PubMed2003

Preclinical complete dentures curriculum survey.

PURPOSE: A survey of U.S. dental schools was conducted in 2001 to determine the curricular structure, teaching philosophies, and techniques used in preclinical complete denture courses. MATERIALS AND METHODS: The questionnaire was mailed to the chairperson of the prosthodontic/restorative departments of 54 U.S. dental schools. Of these, 43 schools returned the completed survey, a response rate of 80%. The mean, median, and range of responses were computed where applicable. RESULTS: Results from this survey show that the mean student-to-faculty ratio in the preclinical course was 12:1, with a median of 12:1 and a range of 6:1 to 27:1. The mean number of laboratory hours was 74, with a median of 70.5 and a range of 31.5 to 160. The mean number of lecture hours reported was 28, with a median of 25 and a range 12 to 80. The mean number of practical examinations was 3, with a median of 3 and a range of 0 to 11. Eighty-four percent of the schools have prosthodontists teaching the course. The mean number of months that this course is taught is 5 months, with a median of 5 and a range of 2 to 13. Fifty-eight percent of the schools use the Hanau semiadjustable articulator. Sixty-five percent of the schools use protrusive records to set the articulator. The facebow preservation record is used by 84% of the schools. CONCLUSIONS: Preclinical complete denture educational programs vary from school to school, yet a large percentage of schools agree on certain topics. Only 28% of dental schools are incorporating new technologies, such as the internet, in their preclinical complete denture curriculum. Nineteen percent of dental schools are using only the Portrait denture teeth, which are newer than the Bioblend and Bioform teeth.

Curriculum↗

PubMedDate not supplied

Removable partial denture education in U.S. dental schools.

PURPOSE: A survey of U.S. dental schools was conducted in 2001 to determine the curricular structure, techniques, and materials used in predoctoral clinical removable partial denture (RPD) programs. MATERIALS AND METHODS: The questionnaire was mailed to the chairperson of the prosthodontic/restorative departments of 54 U.S. dental schools. Of these, 44 schools returned the completed survey, resulting in a response rate of 82%. RESULTS: Results from this survey show that a large majority of schools are using similar materials in clinical RPDs; for instance, using modeling compound for border molding final impression trays (61%) and using a semi-adjustable articulator for mounting preliminary casts (90%) and final casts (98%). In addition, a large majority of schools are using similar techniques in clinical RPDs, such as border molding the edentulous areas of the final impression tray (80%) and using the altered cast impression technique (59%). A set post-insertion protocol is present for patients who receive partial dentures in the majority of the schools (93%). Only 25% of schools reported incorporating new educational materials such as the use of Portrait artificial teeth at the predoctoral level. Eighteen percent of schools are allowing students to graduate without a set number of RPD clinical requirements as has been traditionally the case. CONCLUSIONS: Predoctoral clinical RPD programs vary from school to school, yet a large percentage of schools agree on many topics.

Curriculum↗

PubMedDate not supplied

Communication between the dental laboratory technician and dentist: work authorization for fixed partial dentures.

PURPOSE: A questionnaire was sent to laboratory technicians to determine the level of communication between dentists and dental laboratories in specific areas of the work authorization forms for the fabrication of fixed partial dentures. MATERIALS AND METHODS: A select number of dental laboratories were randomly chosen from the National Association of Dental Laboratories (NADL) for each of the 50 states. The questionnaire was mailed to the laboratory directors for a total of 199 dental laboratories. The survey asked questions pertaining to the following areas of work authorization: legibility and thoroughness of prescriptions, patient information, choice of materials for the prosthesis, design of the prosthesis, and shade description. For each question, the number of responses received was tabulated and converted to a percentage. RESULTS: Of the 199 laboratories surveyed, 114 (57%) responded to the questionnaire. Results from this survey suggest that there is lack of communication between dentists and dental laboratories through work authorization forms regarding choice of metal alloy, type of porcelain to be used, and choice of margin and pontic design for the prosthesis. CONCLUSIONS: Information obtained from the responding laboratories included effectiveness of work authorization forms. There were some similar trends indicated by the large percentage of dental laboratories agreeing on lack of communication by the dentists as reflected by the work authorization forms.

Communication↗

PubMedDate not supplied

Dentist communication with the dental laboratory for prosthodontic treatment using implants.

PURPOSE: A questionnaire was sent to U.S. dental laboratories to evaluate the level of communication between dentists and laboratory technicians and to determine trends in procedures and materials used in fixed and removable implant restorations. METHODS AND MATERIALS: Dental laboratories were randomly chosen from the National Association of Dental Laboratories for each of the 50 states. The questionnaire was mailed to the laboratory directors for 199 dental laboratories. One hundred fourteen dental laboratories returned the survey, yielding a response rate of 57%. Of those laboratories, 37 indicated that they did not participate in the fabrication of fixed implant restorations, yielding a response rate of 39%. Forty-two dental laboratories indicated that they did not participate in the fabrication of implant-retained overdenture prostheses, yielding a response rate of 36%. RESULTS: Results from this survey show inadequate communication by dentists in completing work authorization forms. Custom trays are used more frequently for implant-retained overdenture impressions and stock trays for impressions of fixed implant prostheses. Poly(vinyl siloxane) is the material most commonly used for both fixed and removable implant-supported prostheses. Two implants with stud attachments are used more widely than those with bar attachments for implant-retained overdentures. CONCLUSIONS: Most laboratories working on implant prosthodontic cases report inadequate communication between the laboratory and dentists related to materials and techniques used in fabrication of implant restorations.

Communication↗