Biomedical subjects

Biren A Patel

Publications and source records attributed to Biren A Patel.

8 recordsLinked to original sources

PubMed2006

Bone density spatial patterns in the distal radius reflect habitual hand postures adopted by quadrupedal primates.

Primates adopt diverse hand postures during terrestrial and above-branch quadrupedal locomotion--knuckle-walking, digitigrady, and palmigrady--that incorporate varying degrees of wrist dorsiflexion (i.e., extension). Although relationships between hand postures, wrist joint range of motion, and the external properties of wrist bones (e.g., surface morphology) have been examined, the relationship between hand postures and the internal properties of wrist bones (e.g., bone density) remains largely unexplored. Because articular joint surfaces transmit mechanical loads between conjoining limb bones, measures of density (e.g., magnitudes and patterns) in the subchondral cortical plate of bone of the distal radius can be used to evaluate load regimes experienced by the wrist joint in different hand postures. We assessed apparent (i.e. optical) density patterns in several extant catarrhine primate taxa partitioned into different hand posture groups: knuckle-walking apes, digitigrade monkeys, and palmigrade monkeys. Computed tomography osteoabsorptiometry (CT-OAM) was used to construct maximum intensity projection (MIP) maps of apparent densities. High apparent density areas were characterized relative to a dorsal-volar reference plane and compared across hand posture groups. All groups had large percentage areas of high apparent density in the dorsal region of the distal radial articular surface. Only knuckle-walking apes, however, had a large percentage area of high apparent density in the volar region of the distal radial articular surface. These patterns are consistent with radiocarpal articulations in specific hand postures as evidenced by available radiographic data and suggest that the different habitual hand postures adopted by monkeys and African apes during quadrupedal locomotion have different stereotypic loading patterns. This has implications for understanding the functional morphology and evolution of knuckle-walking and digitigrade hand postures in primates.

Animals↗

PubMed2006

Cercopithecoid cervical vertebral morphology and implications for the presence of Theropithecus in early Pleistocene Europe.

While it is recognized that the overall configuration of the vertebral column, as well as the size and shape of individual vertebrae, differ within and between primate taxa, relatively little is known about the degree to which vertebral morphology reflects a phylogenetic signal or the degree to which vertebral elements can be used in accurate taxonomic classification. Isolated vertebrae are occasionally found in fossil assemblages, and proper taxonomic identification is necessary to make inferences about the animal's biology and place it in a broader phylogenetic and evolutionary context. Recently, three large primate cervical vertebrae (C3, C5, and C6) from Pirro Nord, Italy (early Pleistocene, late Villafranchian) were attributed to the genus Theropithecus based on size comparisons with extant cercopithecoid primates (Rook et al., 2004, J. Hum. Evol. 47, 267-277). These fossils were suggested to indicate an early dispersal of this genus out of Africa around 1.6-1.3 Ma possibly co-incident with early Pleistocene dispersals of Homo. Because of the potential importance of these fossils for interpreting Theropithecus evolution and the relatively few morphological data on primate cervical vertebral morphology, we examined the size and shape of cervical vertebrae in a large sample of extant cercopithecoid taxa (n=106). Specifically, we evaluated whether subfamily and genus level assignments can be made on the basis of isolated cervical elements. Discriminant analyses reveal that scaled shape variables are good discriminators of taxonomic affinity at the subfamily level but are poor discriminators at the genus level. Least-squares regressions show that raw linear dimensions of cervical vertebral morphology are good predictors of body mass in the extant sample. Our regression results produce a likely body mass estimate of 22-38 kg for the Pirro Nord cervical vertebrae. Based on these regression estimates, the poor ability to discriminate cervical vertebrae at the genus level, and paleoenvironmental reconstructions of Pirro Nord, it is unlikely that the Pirro Nord fossils can be confidently attributed to the genus Theropithecus. These findings have important implications for recent interpretations of the nature of Theropithecus dispersal out of Africa.

Animals↗

PubMed2006

Dental metric comparisons of Morotopithecus and Afropithecus: implications for the validity of the genus Morotopithecus.

Morotopithecus bishopi and Afropithecus turkanensis are two large-bodied hominoid primates from early Miocene deposits of eastern Africa. Researchers have used both cranial and postcranial characters to distinguish these two species. Unfortunately, of the fossil material attributed to each, only the face, palate, and upper dentition are preserved well enough in both species for direct comparisons. There are currently no known directly comparable postcranial elements. In this study, we reevaluated dental characters argued to distinguish the type specimens of Morotopithecus from Afropithecus: relative size of the upper premolars and M3. Exact randomization methods were used to address two questions. First, is it possible to find the degree of dental-size difference observed between Morotopithecus (UMP 62-11) and Afropithecus (KNM-WK 16999) within extant African hominoids? Second, what is the probability of observing the levels of difference found between the fossils among pairs of extant individuals? Metric differences in relative premolar and M3 size were calculated between all possible pairs within the extant sample and the observed difference of the fossil pair was then compared to the resulting distribution of extant pairs. The observed size differences for all comparisons in the fossil teeth were well within the variation observed in the extant African hominoid samples (p>0.05). In light of these results and other currently available cranial evidence, we suggest that the type specimens of Morotopithecus and Afropithecus are not different enough to support taxonomic distinction.

Africa, Eastern↗

PubMed2006

Habitual use of the primate forelimb is reflected in the material properties of subchondral bone in the distal radius.

Bone mineral density is directly proportional to compressive strength, which affords an opportunity to estimate in vivo joint load history from the subchondral cortical plate of articular surfaces in isolated skeletal elements. Subchondral bone experiencing greater compressive loads should be of relatively greater density than subchondral bone experiencing less compressive loading. Distribution of the densest areas, either concentrated or diffuse, also may be influenced by the extent of habitual compressive loading. We evaluated subchondral bone in the distal radius of several primates whose locomotion could be characterized in one of three general ways (quadrupedal, suspensory or bipedal), each exemplifying a different manner of habitual forelimb loading (i.e. compression, tension or non-weight-bearing, respectively). We employed computed tomography osteoabsorptiometry (CT-OAM) to acquire optical densities from which false-colour maps were constructed. The false-colour maps were used to evaluate patterns in subchondral density (i.e. apparent density). Suspensory apes and bipedal humans had both smaller percentage areas and less well-defined concentrations of regions of high apparent density relative to quadrupedal primates. Quadrupedal primates exhibited a positive allometric effect of articular surface size on high-density area, whereas suspensory primates exhibited an isometric effect and bipedal humans exhibited no significant relationship between the two. A significant difference between groups characterized by predominantly compressive forelimb loading regimes vs. tensile or non-weight-bearing regimes indicates that subchondral apparent density in the distal radial articular surface distinguishes modes of habitually supporting of body mass.

Absorptiometry, Photon↗

PubMed2005

Modeling masticatory muscle force in finite element analysis: sensitivity analysis using principal coordinates analysis.

Our work on a finite element model of the skull of Macaca aims to investigate the functional significance of specific features of primate skulls and to determine to which of the input variables (elastic properties, muscle forces) the model behavior is most sensitive. Estimates of muscle forces acting on the model are derived from estimates of physiological cross-sectional areas (PCSAs) of the jaw muscles scaled by relative electromyographic (EMG) amplitudes recorded in vivo. In this study, the behavior of the model was measured under different assumptions regarding the PCSAs of the jaw muscles and the latency between EMG activity in those muscles and the resulting force production. Thirty-six different loading regimes were applied to the model using four different PCSA sets and nine different PCSA scaling parameters. The four PCSA sets were derived from three different macaque species and one genus average, and the scaling parameters were either EMGs from 10, 20, 30, 40, 50 and 60 msec prior to peak bite force, or simply 100%, 50%, or 25% of peak muscle force. Principal coordinates analysis was used to compare the deformations of the model produced by the 36 loading regimes. Strain data from selected sites on the model were also compared with in vivo bone strain data. The results revealed that when varying the external muscle forces within these boundaries, the majority of the variation in model behavior is attributable to variation in the overall magnitude rather than the relative amount of muscle force generated by each muscle. Once this magnitude-related variation in model deformation was accounted for, significant variation was attributable to differences in relative muscle recruitment between working and balancing sides. Strain orientations at selected sites showed little variation across loading experiments compared with variation documented in vivo. These data suggest that in order to create an accurate and valid finite element model of the behavior of the primate skull at a particular instant during feeding, it is important to include estimates of the relative recruitment levels of the masticatory muscles. However, a lot can be learned about patterns of skull deformation, in fossil species for example, by applying external forces proportional to the estimated relative PCSAs of the jaw adductors.

Animals↗

PubMed2005

Modeling elastic properties in finite-element analysis: how much precision is needed to produce an accurate model?

The influence of elastic properties on finite-element analysis was investigated using a finite-element model of a Macaca fascicularis skull. Four finite-element analyses were performed in which the model was assigned different sets of elastic properties. In analysis 1, elastic properties were modeled isotropically using published data obtained from human limb bones. Analyses 2-4 used data obtained from skulls of a closely allied species, M. mulatta, but varied as to how those data were incorporated into the model. In analysis 2, the model was assigned a single set of isotropic elastic properties. In analysis 3, each region within the model was assigned its own set of isotropic elastic properties. Finally, in analysis 4, each region received its own set of orthotropic elastic properties. Although a qualitative assessment indicates that the locations of strain concentrations across the model are broadly similar in all analyses, a quantitative assessment of strain indicates some differences between the analyses. When strain data from the finite-element analyses were compared to strain data derived from in vivo experiments, it was found that the model deformed most realistically using the orthotropic elastic properties employed in analysis 4. Results suggest that finite-element analyses can be adversely affected when elastic properties are modeled imprecisely, and that modelers should attempt to obtain elastic properties data about the species and skeletal elements that are the subjects of their analyses.

Anatomy↗

PubMed2005

The hominoid proximal radius: re-interpreting locomotor behaviors in early hominins.

Studies of fossil hominins are traditionally taxonomically narrow and often exclude comparisons with hylobatids. Hence, results of functional analyses of postcrania, interpreted as indicating that early hominins are "African-ape-like" in their postcranial skeletons and positional behaviors, may reflect an artifact of inadequate taxonomic and morphological breadth of the comparative sample. To address this problem and better understand early hominin positional behaviors, this study included hylobatids in a comparative analysis, focusing on the hominoid elbow joint. Specifically, morphometric variables of the proximal radius were derived from measurements from a sample of all genera of extant hominoids and casts of extinct hominin species. Univariate and multivariate analyses were performed on these data. Results show that early hominins are morphologically diverse and are not, as a group, similar to any one extant group. Instead, the fossils resemble Pan, Gorilla, and Hylobates, and are not like modern Homo sapiens or Pongo. This suggests that the morphology of Hylobates may reflect a morphotype for all later hominoids, thus complicating the functional interpretations of fossil hominins. The implications of these results are that the proximal radius is not a sensitive indicator of locomotor behavior among hominoids since the morphology in hylobatids and Gorilla and Pan is similar despite widely varying positional repertoires. Furthermore, inferences of function from form in extinct hominins can be drastically affected by the comparative outgroup selection. A re-evaluation of the functional morphology of the proximal radius in early hominins is addressed.

Animals↗

PubMed2004

Form and function of the oblique cord (chorda obliqua) in anthropoid primates.

The oblique cord of the forearm in humans is a ligament connecting the anterolateral aspect of the ulna proximally to the posteromedial aspect of the radius distally, inserting just below the radial tuberosity. Its functional significance is uncertain, but it has been proposed that the ligament limits supination of the forearm or aids in resisting buckling failure in the curved radius. These functional explanations are unsatisfactory for bipedal humans who do not use their forelimbs in weight support. Furthermore, there are no evolutionary explanations for its presence in humans. The purpose of this study was to investigate the distribution and form of the oblique cord in non-human primates and to explore its possible functional significance and evolutionary origin in humans. Soft tissue dissections of anthropoid primates revealed the presence of an oblique cord in New and Old World monkeys and Asian apes. It was absent in all atelines. Passive manipulation of the two forearm bones in all specimens revealed that the ligament becomes most taut in pronation contrary to the proposed human condition. Isolated radii show that the oblique cord's radial insertion lacks a clear relationship with bone curvature, thus providing little support for the hypothesis of preventing buckling failure. The oblique cord's involvement in reducing bending strain in the curved radius is also unlikely. It is suggested here that the ligament may have a role in maintaining elbow stability in quadrupedal primates. Therefore, the function of the oblique cord in anthropoid primates suggests that its presence in modern humans may be a morphological and functional remnant from a quadrupedal ancestry.

Animals↗