PubMed Health⌕ Search

Biomedical subjects

Brent L Iverson

Publications and source records attributed to Brent L Iverson.

At least 19 recordsLinked to original sources

Screening of threading bis-intercalators binding to duplex DNA by electrospray ionization tandem mass spectrometry.

The DNA binding of novel threading bis-intercalators V1, trans-D1, and cis-C1, which contain two naphthalene diimide (NDI) intercalation units connected by a scaffold, was evaluated using electrospray ionization mass spectrometry (ESI-MS) and DNAse footprinting techniques. ESI-MS experiments confirmed that V1, the ligand containing the -Gly3-Lys- peptide scaffold, binds to a DNA duplex containing the 5'-GGTACC-3' specific binding site identified in previous NMR-based studies. The ligand formed complexes with a ligand/DNA binding stoichiometry of 1:1, even when there was excess ligand in solution. Trans-D1 and cis-C1 are new ligands containing a rigid spiro-tricyclic scaffold in the trans- and cis- orientations, respectively. Preliminary DNAse footprinting experiments identified possible specific binding sites of 5'-CAGTGA-5' for trans-D1 and 5'-GGTACC-3' for cis-C1. ESI-MS experiments revealed that both ligands bound to DNA duplexes containing the respective specific binding sequences, with cis-C1 exhibiting the most extensive binding based on a higher fraction of bound DNA value. Cis-C1 formed complexes with a dominant 1:1 binding stoichiometry, whereas trans-D1 was able to form 2:1 complexes at ligand/DNA molar ratios >or=1 which is suggestive of nonspecific binding. Collisional activated dissociation (CAD) experiments indicate that DNA complexes containing V1, trans-D1, and cis-C1 have a unique fragmentation pathway, which was also observed for complexes containing the commercially available bis-intercalator echinomycin, as a result of similar binding interactions, marked by intercalation in addition to hydrogen bonding by the scaffold with the DNA major or minor groove.

Binding Sites↗

Substrate specificity of the Escherichia coli outer membrane protease OmpP.

Escherichia coli OmpP is an F episome-encoded outer membrane protease that exhibits 71% amino acid sequence identity with OmpT. These two enzymes cleave substrate polypeptides primarily between pairs of basic amino acids. We found that, like OmpT, purified OmpP is active only in the presence of lipopolysaccharide. With optimal peptide substrates, OmpP exhibits high catalytic efficiency (k(cat)/K(m) = 3.0 x 10(6) M(-1)s(-1)). Analysis of the extended amino acid specificity of OmpP by substrate phage revealed that both Arg and Lys are strongly preferred at the P1 and P1' sites of the enzyme. In addition, Thr, Arg, or Ala is preferred at P2; Leu, Ala, or Glu is preferred at P4; and Arg is preferred at P3'. Notable differences in OmpP and OmpT specificities include the greater ability of OmpP to accept Lys at the P1 or P1', site as well as the prominence of Ser at P3 in OmpP substrates. Likewise, the OmpP P1 site could better accommodate Ser; as a result, OmpP was able to cleave a peptide substrate between Ser-Arg about 120 times more efficiently than was OmpT. Interestingly, OmpP and OmpT cleave peptides with three consecutive Arg residues at different sites, a difference in specificity that might be important in the inactivation of cationic antimicrobial peptides. Accordingly, we show that the presence of an F' episome results in increased resistance to the antimicrobial peptide protamine both in ompT mutants and in wild-type E. coli cells.

Amino Acid Sequence↗

Assembly of multimeric phage nanostructures through leucine zipper interactions.

One barrier to the construction of nanoscale devices is the ability to place materials into 2D- and 3D-ordered arrays by controlling the assembly and ordering of connections between nanomaterials. Ordered assembly of nanoscale materials may potentially be achieved using biological tools that direct specific connections between individual components. Recently, viruses were successfully employed as scaffolds for the nucleation of nanoparticles and nanowires (Mao et al., 2004); however, there is a paucity of methods for the higher order assembly of phage-templated materials. Here we describe a general strategy for the assembly of filamentous bacteriophages into long, wire-like or into tripod-like structures. To prepare the linear phage assemblies, dimeric leucine zipper protein domains, fused to the p3 and p9 proteins of M13 bacteriophage, were employed to direct the specific end-to-end self-association of the bacteriophage particles. Electron microscopy revealed that up to 90% of the phage displaying complementary leucine zipper domains formed linear multi-phage assemblies, composed of up to 30 phage in length. To prepare tripod-like assemblies, phage were engineered to express trimeric leucine zippers as p3 fusion proteins. This resulted in 3D assembly with three individual phages attached at a single point. These ordered phage structures should provide a foundation for self-assembly of virally templated nanomaterials into useful devices.

Bacteriophage M13↗

The evolution of catalytic efficiency and substrate promiscuity in human theta class 1-1 glutathione transferase.

Theta class glutathione transferases (GST) from various species exhibit markedly different catalytic activities in conjugating the tripeptide glutathione (GSH) to a variety of electrophilic substrates. For example, the human theta 1-1 enzyme (hGSTT1-1) is 440-fold less efficient than the rat theta 2-2 enzyme (rGSTT2-2) with the fluorogenic substrate 7-amino-4-chloromethyl coumarin (CMAC). Large libraries of hGSTT1-1 constructed by error-prone PCR, DNA shuffling, or saturation mutagenesis were screened for improved catalytic activity towards CMAC in a quantitative fashion using flow cytometry. An iterative directed evolution approach employing random mutagenesis in conjunction with homologous recombination gave rise to enzymes exhibiting up to a 20,000-fold increase in k(cat)/K(M) compared to hGSTT1-1. All highly active clones encoded one or more mutations at residues 32, 176, or 234. Combinatorial saturation mutagenesis was used to evaluate the full complement of natural amino acids at these positions, and resulted in the isolation of enzymes with catalytic rates comparable to those exhibited by the fastest mutants obtained via directed evolution. The substrate selectivities of enzymes resulting from random mutagenesis, DNA shuffling, and combinatorial saturation mutagenesis were evaluated using a series of distinct electrophiles. The results revealed that promiscuous substrate activities arose in a stochastic manner, as they did not correlate with catalytic efficiency towards the CMAC selection substrate. In contrast, chimeric enzymes previously constructed by homology-independent recombination of hGSTT-1 and rGSTT2-2 exhibited very different substrate promiscuity profiles, and showed a more defined relationship between evolved and promiscuous activities.

Catalysis↗

Tunable columnar mesophases utilizing C2 symmetric aromatic donor-acceptor complexes.

Derivatives of relatively electron rich 1,5-dialkoxynaphthalene (Dan) donors and relatively electron deficient 1,4,5,8-naphthalenetetracarboxylic diimide (Ndi) acceptors have been exploited in the folding and self-assembly of a variety of complex molecular systems in solution. Here, we report the use of Dan and Ndi derivatives to direct assembly of extended columns with alternating face-centered stacked structure in the solid state. A variety of 1:1 Dan:Ndi mixtures produced mesophases that were found to be stable over temperature ranges extending up to 110 degrees C. Analysis of these mesophases indicates mixtures with soft/plastic crystal phases and a few mixtures with the thermodynamic properties of true liquid crystals, all composed of alternating donor-acceptor columns within. Importantly, a correspondence was found between the clearing and crystallization points of the mesophase mixtures and the melting/clearing points of the component Ndi and Dan units, respectively. This correspondence enables the predictable tuning of mesophase phase transition temperatures. The study of sterically hindered derivatives led to a set of mixtures in which a dramatic and sudden color change (deep red to yellow) was observed upon crystallization of the mesophase due to a phase separation of the component donor and acceptor units.

Biomimetic Materials↗

Engineering of recombinant antibody fragments to methamphetamine by anchored periplasmic expression.

The detection of methamphetamine and other chemically related illicit drugs relies extensively on immunoassays. Here we report the cloning and affinity maturation of an anti-methamphetamine antibody which is being employed in the current commercial assays. An anti-methamphetamine scFv was cloned from hybridoma cells, expressed in bacteria and its affinity towards methamphetamine and N-ethylamphetamine (ethamphetamine) was determined by Surface Plasmon Resonance (SPR). The anti-methamphetamine scFv gene was subjected to random mutagenesis by error prone PCR and variants with improved affinity were isolated from the resulting library by a novel screening methodology termed Anchored Periplasmic Expression (APEx) [Harvey, B.R., Georgiou, G., Hayhurst, A., Jeong, K.J., Iverson, B.L., Rogers, G.K. (2004). Anchored periplasmic expression, a versatile technology for the isolation of high-affinity antibodies from Escherichia coli-expressed libraries. Proc. Natl. Acad. Sci. U. S. A. 101, 9193.]. The isolated clones exhibited improved affinity to these illicit drugs, yet maintained low cross-reactivity to over-the-counter drugs. In addition, all clones displayed improved expression characteristics in Escherichia coli. The affinity improved scFv antibodies are thus likely to be useful in methamphetamine class immunodiagnostics.

Amino Acid Sequence↗

Why high-error-rate random mutagenesis libraries are enriched in functional and improved proteins.

The fraction of proteins that retain wild-type function after mutation has long been observed to decline exponentially as the average number of mutations per gene increases. Recently, several groups have used error-prone polymerase chain reactions (PCR) to generate libraries with 15 to 30 mutations per gene, on average, and have reported that orders of magnitude more proteins retain function than would be expected from the low-mutation-rate trend. Proteins with improved or novel function were isolated disproportionately from these high-error-rate libraries, leading to claims that high mutation rates unlock regions of sequence space that are enriched in positively coupled mutations. Here, we show experimentally that error-prone PCR produces a broader non-Poisson distribution of mutations consistent with a detailed model of PCR. As error rates increase, this distribution leads directly to the observed excesses in functional clones. We then show that while very low mutation rates result in many functional sequences, only a small number are unique. By contrast, very high mutation rates produce mostly unique sequences, but few retain function. Thus an optimal mutation rate exists that balances uniqueness and retention of function. Overall, high-error-rate mutagenesis libraries are enriched in improved sequences because they contain more unique, functional clones. Our findings demonstrate how optimal error-prone PCR mutation rates may be calculated, and indicate that "optimal" rates depend on both the protein and the mutagenesis protocol.

Data Interpretation, Statistical↗

Evolution of highly active enzymes by homology-independent recombination.

The theta-class GST enzymes hGSTT1-1 (human GSTTheta-1-1) and rGSTT2-2 (rat GSTTheta-2-2) share 54.3% amino acid identity and exhibit different substrate specificities. Homology-independent techniques [incremental truncation for the creation of hybrid enzymes (ITCHY) and SCRATCHY] and low-homology techniques (recombination-dependent exponential amplification PCR) were used to create libraries of chimeric enzymes containing crossovers (C/Os) at positions not accessible by DNA family shuffling. High-throughput flow cytometric screening using the fluorogenic rGSTT2-2-specific substrate 7-amino-4-chloromethyl coumarin led to the isolation of active variants with either one or two C/Os. One of these enzymes, SCR23 (83% identity to hGSTT1-1), was encoded by a gene that exchanged helices 4 and 5 of hGSTT1-1 with the corresponding sequence from rGSTT2-2. Compared with either parent, this variant was found to have an improved k(cat) with the selection substrate and also exhibited activity for the conjugation of glutathione to ethacrynic acid, a compound that is not recognized by either parental enzyme. These results highlight the power of combinatorial homology-independent and low-homology recombination methods for the generation of unique, highly active enzymes and also suggest a possible means of enzyme "humanization."

Animals↗

Engineering of protease variants exhibiting high catalytic activity and exquisite substrate selectivity.

The exquisite selectivity and catalytic activity of enzymes have been shaped by the effects of positive and negative selection pressure during the course of evolution. In contrast, enzyme variants engineered by using in vitro screening techniques to accept novel substrates typically display a higher degree of catalytic promiscuity and lower total turnover in comparison with their natural counterparts. Using bacterial display and multiparameter flow cytometry, we have developed a novel methodology for emulating positive and negative selective pressure in vitro for the isolation of enzyme variants with reactivity for desired novel substrates, while simultaneously excluding those with reactivity toward undesired substrates. Screening of a large library of random mutants of the Escherichia coli endopeptidase OmpT led to the isolation of an enzyme variant, 1.3.19, that cleaved an Ala-Arg peptide bond instead of the Arg-Arg bond preferred by the WT enzyme. Variant 1.3.19 exhibited greater than three million-fold selectivity (-Ala-Arg-/-Arg-Arg-) and a catalytic efficiency for Ala-Arg cleavage that is the same as that displayed by the parent for the preferred substrate, Arg-Arg. A single amino acid Ser223Arg substitution was shown to recapitulate completely the unique catalytic properties of the 1.3.19 variant. These results can be explained by proposing that this mutation acts to "swap" the P(1) Arg side chain normally found in WT substrate peptides with the 223Arg side chain in the S(1) subsite of OmpT.

Arginine↗

Altering the folding patterns of naphthyl trimers.

Proteins can adopt helical and sheet-type secondary structures that depend on their primary sequence of amino acids. Nonnatural foldamers have been developed to emulate these protein structures as well as investigate various types of noncovalent interactions. Here we report a strategy to access two distinct folding topologies in aqueous solutions using the inherent recognition properties of aromatic donor/acceptor interactions. These oligomers are constructed of electron-rich 1,5-dialkoxynaphthalene (Dan) and electron-deficient 1,4,5,8-naphthalenetetracarboxylic diimide (Ndi) units. A trimer of the sequence Dan-Ndi-Dan was shown to adopt a pleated fold in solution, while its constitutional isomer, Dan-Dan-Ndi, adopted an intercalative or turn-type fold. UV-vis and NOESY spectroscopy analyses were consistent with the two different conformations. This study illustrates the designability of folding naphthyl oligomers and encourages the use of directed aromatic interactions to construct larger and more complex assemblies in water.

Biomimetic Materials↗

NMR structural analysis of a modular threading tetraintercalator bound to DNA.

The synthesis and NMR structural studies are reported for a modular threading tetraintercalator bound to DNA. The tetraintercalator design is based on 1,4,5,8-tetracarboxylic naphthalene diimide units connected through flexible peptide linkers. Aided by an overall C(2) symmetry, NMR analysis verified a threading polyintercalation mode of binding, with linkers alternating in the order minor groove, major groove, minor groove, analogous to how a snake might climb a ladder. This study represents the first NMR analysis of a threading tetraintercalator and, as such, structurally characterizes a new topology for molecules that bind to relatively long DNA sequences with extensive access to both DNA grooves.

Binding Sites↗

A periplasmic fluorescent reporter protein and its application in high-throughput membrane protein topology analysis.

We have developed a periplasmic fluorescent reporter protein suitable for high-throughput membrane protein topology analysis in Escherichia coli. The reporter protein consists of a single chain (scFv) antibody fragment that binds to a fluorescent hapten conjugate with high affinity. Fusion of the scFv to membrane protein sites that are normally exposed in the periplasmic space tethers the scFv onto the inner membrane. Following permealization of the outer membrane to allow diffusion of the fluorescent hapten into the periplasm, binding to the anchored scFv renders the cells fluorescent. We show that cell fluorescence is an accurate and sensitive reporter of the location of residues within periplasmic loops. For topological analysis, a set of nested deletions in the membrane protein gene is employed to construct two libraries of gene fusions, one to the scFvand one to the cytoplasmic reporter green fluorescent protein (GFP). Fluorescent clones are isolated by flow cytometry and the sequence of the fusion junctions is determined to identify amino acid residues within periplasmic and cytoplasmic loops, respectively. We applied this methodology to the topology analysis of E. coli TatC protein for which previous studies had led to conflicting results. The ease of screening libraries of fusions by flow cytometry enabled the rapid identification of almost 90 highly fluorescent scFv and GFP fusions, which, in turn, allowed the fine mapping of TatC membrane topology.

Amino Acid Sequence↗

Anchored periplasmic expression, a versatile technology for the isolation of high-affinity antibodies from Escherichia coli-expressed libraries.

Anchored periplasmic expression (APEx) is a technology for the isolation of ligand-binding proteins from combinatorial libraries anchored on the periplasmic face of the inner membrane of Escherichia coli. After disruption of the outer membrane by Tris-EDTA-lysozyme, the inner-membrane-anchored proteins readily bind fluorescently labeled ligands as large as 240 kDa. Fluorescently labeled cells are isolated by flow cytometry, and the DNA of isolated clones is rescued by PCR. By using two rounds of APEx, the affinity of a neutralizing antibody to the Bacillus anthracis protective antigen was improved >200-fold, exhibiting a final K(D) of 21 pM. This approach has several technical advantages compared with previous library screening technologies, including the unique ability to screen for ligand-binding proteins that bind endogenously expressed ligands fused to a short-lived GFP. Further, APEx is able to display proteins either as an N-terminal fusion to a six-residue sequence derived from the native E. coli lipoprotein NlpA, or as a C-terminal fusion to the phage gene three minor coat protein of M13. The latter fusions allow hybrid phage display/APEx strategies without the need for further subcloning.

Antibodies, Bacterial↗

Bacterial biosynthesis of cadmium sulfide nanocrystals.

Semiconductor nanocrystals, which have unique optical and electronic properties, have potential for applications in the emerging field of nanoelectronics. To produce nanocrystals cheaply and efficiently, biological methods of synthesis are being explored. We found that E. coli, when incubated with cadmium chloride and sodium sulfide, have the capacity to synthesize intracellular cadmium sulfide (CdS) nanocrystals. The nanocrystals are composed of a wurtzite crystal phase with a size distribution of 2-5 nm. Nanocrystal biosynthesis increased about 20-fold in E. coli cells grown to stationary phase compared to late logarithmic phase. Our results highlight how different genetic and physiological parameters can enhance the formation of nanocrystals within bacterial cells.

Cadmium Compounds↗

Enhanced crossover SCRATCHY: construction and high-throughput screening of a combinatorial library containing multiple non-homologous crossovers.

SCRATCHY is a methodology for the construction of libraries of chimeras between genes that display low sequence homology. We have developed a strategy for library creation termed enhanced crossover SCRATCHY, that significantly increases the number of clones containing multiple crossovers. Complementary chimeric gene libraries generated by incremental truncation (ITCHY) of two distinct parental sequences are created, and are then divided into arbitrarily defined sections. The respective sections are amplified by skewed sets of primers (i.e. a combination of gene A specific forward primer and gene B specific reverse primer, etc.) allowing DNA fragments containing non-homologous crossover points to be amplified. The amplified chimeric sections are then subjected to a DNA shuffling process generating an enhanced crossover SCRATCHY library. We have constructed such a library using the rat theta 2 glutathione transferase (rGSTT2) and the human theta 1 glutathione transferase (hGSTT1) genes (63% DNA sequence identity). DNA sequencing analysis of unselected library members revealed a greater diversity than that obtained by canonical family shuffling or with conventional SCRATCHY. Expression and high-throughput flow cytometric screening of the chimeric GST library identified several chimeric progeny that retained rat-like parental substrate specificity.

Animals↗

Isolation and expression of recombinant antibody fragments to the biological warfare pathogen Brucella melitensis.

Brucella melitensis is a highly infectious animal pathogen able to cause a recurring debilitating disease in humans and is therefore high on the list of biological warfare agents. Immunoglobulin genes from mice immunized with gamma-irradiated B. melitensis strain 16M were used to construct a library that was screened by phage display against similarly prepared bacteria. The selected phage particles afforded a strong enzyme-linked immunosorbent assay (ELISA) signal against gamma-irradiated B. melitensis cells. However, extensive efforts to express the respective single chain antibody variable region fragment (scFv) in soluble form failed due to: (i) poor solubility and (ii) in vivo degradation of the c-myc tag used for the detection of the recombinant antibodies. Both problems could be addressed by: (i) fusing a human kappa light chain constant domain (Ck) chain to the scFv to generate single chain antibody fragment (scAb) antibody fragments and (ii) by co-expression of the periplasmic chaperone Skp. While soluble, functional antibodies could be produced in this manner, phage-displaying scFvs or scAbs were still found to be superior ELISA reagents for immunoassays, due to the large signal amplification afforded by anti-phage antibodies. The isolated phage antibodies were shown to be highly specific to B. melitensis and did not recognize Yersinia pseudotuberculosis in contrast to the existing diagnostic monoclonal YST 9.2.1.

Amino Acid Sequence↗

Effects of codon usage versus putative 5'-mRNA structure on the expression of Fusarium solani cutinase in the Escherichia coli cytoplasm.

Matching the codon usage of recombinant genes to that of the expression host is a common strategy for increasing the expression of heterologous proteins in bacteria. However, while developing a cytoplasmic expression system for Fusarium solani cutinase in Escherichia coli, we found that altering codons to those preferred by E. coli led to significantly lower expression compared to the wild-type fungal gene, despite the presence of several rare E. coli codons in the fungal sequence. On the other hand, expression in the E. coli periplasm using a bacterial PhoA leader sequence resulted in high levels of expression for both the E. coli optimized and wild-type constructs. Sequence swapping experiments as well as calculations of predicted mRNA secondary structure provided support for the hypothesis that differential cytoplasmic expression of the E. coli optimized versus wild-type cutinase genes is due to differences in 5(') mRNA secondary structures. In particular, our results indicate that increased stability of 5(') mRNA secondary structures in the E. coli optimized transcript prevents efficient translation initiation in the absence of the phoA leader sequence. These results underscore the idea that potential 5(') mRNA secondary structures should be considered along with codon usage when designing a synthetic gene for high level expression in E. coli.

Amino Acid Sequence↗