PubMed Health⌕ Search

Biomedical subjects

Brian G Fox

Publications and source records attributed to Brian G Fox.

At least 37 records · Page 2Linked to original sources
PubMed2005

Fluorescence anisotropy assay for proteolysis of specifically labeled fusion proteins.

A cloning method and plasmid vectors that permit fluorescence-anisotropy-based measurement of proteolysis are reported. The recombinant protein substrates produced by this method contain a tetracysteine motif that can be site-specifically labeled with bis-arsenical fluorophore [Science 281 (1998) 269]. Six protein substrates with an N-terminal fusion of the tetracysteine motif and different protease recognition sites were created and tested for reaction with commercial proteases commonly used to process recombinant fusion proteins. In each case, proteolysis of a single susceptible peptide bond could be monitored in real time and with sufficient data quality to allow numerical analysis of proteolysis reaction kinetics. Measurement of proteolysis extent using fluorescence anisotropy is shown to be comparable to densitometry measurements made on denaturing polyacrylamide gels but with the added advantages implicit in a time-resolved measurement, quantification by a spectroscopic measurement, and facile extensibility to high-throughput formats. The assay was also demonstrated as a general tool for monitoring proteolysis of multidomain fusion proteins containing an internal protease site such as are being created in structural genomics studies worldwide.

Amino Acid Motifs↗
PubMed2005

High-throughput purification and quality assurance of Arabidopsis thaliana proteins for eukaryotic structural genomics.

The Center for Eukaryotic Structural Genomics (CESG) has established procedures for the purification of Arabidopsis proteins in a high-throughput mode. Recombinant proteins were fused with (His)(6)-MBP tags at their N-terminus and expressed in Escherichia coli. Using an automated AKTApurifier system, fusion proteins were initially purified by immobilized metal affinity chromatography (IMAC). After cleavage of (His)(6)-MBP tags by TEV protease, (His)(6)-MBP tags were separated from target proteins by a subtractive 2nd IMAC. As a part of quality assurance, all purified proteins were subjected to MALDI-TOF and ESI mass spectrometry to confirm target identity and integrity, and determine incorporation of seleno-methionine (SeMet) and (15)N and (13)C isotopes. The protocols have been used successfully to provide high quality proteins that are suitable for structural studies by X-ray crystallography and NMR.

Arabidopsis↗
PubMed2005

Reaction mechanisms of non-heme diiron hydroxylases characterized in whole cells.

Whole cells expressing the non-heme diiron hydroxylases AlkB and toluene 4-monooxygenase (T4MO) were used to probe enzyme reaction mechanisms. AlkB catalyzes the hydroxylation of the radical clock substrates bicyclo[4.1.0]heptane (norcarane), spirooctane and 1,1-diethylcyclopropane, and does not catalyze the hydroxylation of the radical clocks 1,1-dimethylcyclopropane or 1,1,2,2-tetramethylcyclopropane. The hydroxylation of norcarane yields a distribution of products consistent with an "oxygen-rebound" mechanism for the enzyme in both the wild type Pseudomonas putida GPo1 and AlkB from P. putida GPo1 expressed in Escherichia coli. Evidence for the presence of a substrate-based radical during the reaction mechanism is clear. With norcarane, the lifetime of that radical varies with experimental conditions. Experiments with higher substrate concentrations yield a shorter radical lifetime (approximately 1 ns), while experiments with lower substrate concentrations yield a longer radical lifetime (approximately 19 ns). Consistent results were obtained using either wild type or AlkB-equipped host organisms using either "resting cell" or "growing cell" approaches. T4MO expressed in E. coli also catalyzes the hydroxylation of norcarane with a radical lifetime of approximately 0.07 ns. No radical lifetime dependence on substrate concentration was seen. Results from experiments with diethylcyclopropane, spirooctane, dimethylcyclopropane, and diethylcyclopropane are consistent with a restricted active site for AlkB.

Cytochrome P-450 CYP4A↗
PubMed2005

Expression, purification, and physical characterization of Escherichia coli lipoyl(octanoyl)transferase.

Lipoic acid is a sulfur-containing 8-carbon fatty acid that functions as a central cofactor in multienzyme complexes that are involved in the oxidative decarboxylation of glycine and several alpha-keto acids. In its functional form, it is bound covalently in an amide linkage to the epsilon-amino group of a conserved lysine residue of the "lipoyl bearing subunit," resulting in a long "swinging arm" that shuttles intermediates among the requisite active sites. In Escherichia coli and many other organisms, the lipoyl cofactor can be synthesized endogenously. The 8-carbon fatty-acyl chain is constructed via the type II fatty acid biosynthetic pathway as an appendage to the acyl carrier protein (ACP). Lipoyl(octanoyl)transferase (LipB) transfers the octanoyl chain from ACP to the target lysine acceptor, generating the substrate for lipoyl synthase (LS), which subsequently catalyzes insertion of both sulfur atoms into the C-6 and C-8 positions of the octanoyl chain. In this study, we present a three-step isolation procedure that results in a 14-fold purification of LipB to >95% homogeneity in an overall yield of 25%. We also show that the protein catalyzes the transfer of the octanoyl group from octanoyl-ACP to apo-H protein, which is the lipoyl bearing subunit of the glycine cleavage system. The specific activity of the purified protein is 0.541 U mg(-1), indicating a turnover number of approximately 0.2 s(-1), and the apparent Km values for octanoyl-ACP and apo-H protein are 10.2+/-4.4 and 13.2+/-2.9 microM, respectively.

Acyl Carrier Protein↗
PubMed2005

Protocols for production of selenomethionine-labeled proteins in 2-L polyethylene terephthalate bottles using auto-induction medium.

Protocols have been developed and applied in the high-throughput production of selenomethionine labeled fusion proteins using the conditional Met auxotroph Escherichia coli B834. The large-scale growth and expression uses a chemically defined auto-induction medium containing 125 mg L(-1) selenomethionine, salts and trace metals, other amino acids including 10 mg L(-1) of methionine, vitamins except vitamin B12, and glucose, glycerol, and alpha-lactose. A schematic for a shaker rack that can hold up to twenty-four 2-L polyethylene terephthalate beverage bottles in a standard laboratory refrigerated floor shaker is provided. The growth cycle from inoculation of the culture bottle through the growth, induction, and expression was timed to take approximately 24 h. Culture growth in the auto-induction medium gave an average final optical density at 600 nm of approximately 6 and an average wet cell mass yield of approximately 14 g from 2 L of culture in greater than 150 expression trials. A simple method for visual scoring of denaturing electrophoresis gels for total protein expression, solubility, and effectiveness of fusion protein proteolysis was developed and applied. For the favorably scored expression trials, the average yield of purified, selenomethionine-labeled target protein obtained after proteolysis of the fusion protein was approximately 30 mg. Analysis by mass spectrometry showed greater than 90% incorporation of selenomethionine over a approximately 8-fold range of selenomethionine concentrations in the growth medium, with higher growth rates observed at the lower selenomethionine concentrations. These protein preparations have been utilized to solve X-ray crystal structures by multiwavelength anomalous diffraction phasing.

Cell Culture Techniques↗
PubMed2005

Auto-induction medium for the production of [U-15N]- and [U-13C, U-15N]-labeled proteins for NMR screening and structure determination.

Protocols have been developed and applied for the high-throughput production of [U-15N]- or [U-13C-, U-15N]-labeled proteins using the conditional methionine auxotroph Escherichia coli B834. The large-scale growth and expression uses a chemically defined auto-induction medium containing salts and trace metals, vitamins including vitamin B12, and glucose, glycerol, and lactose. The results from nine expression trials in 2-L of the auto-induction medium (500 mL in each of four polyethylene terephthalate beverage bottles) gave an average final optical density at 600 nm of approximately 5, an average wet cell mass yield of approximately 9.5 g L(-1), and an average yield of approximately 20 mg of labeled protein in the six instances in which proteolysis of the fusion protein was observed. Correlations between the cell mass recovered, the level of protein expression, and the relative amounts of glucose, glycerol, and lactose in the auto-induction medium were noted. Mass spectral analysis showed that the purified proteins contained both 15N and 13C at levels greater than 95%. 1H-15N heteronuclear single quantum correlation spectroscopy as well as 13C; 15N-edited spectroscopy showed that the purified [U-15N]- and [U-13C, U-15N]-labeled proteins were suitable for structure analysis.

Carbon Isotopes↗
PubMed2005

X-ray structure of putative acyl-ACP desaturase DesA2 from Mycobacterium tuberculosis H37Rv.

Genome sequencing showed that two proteins in Mycobacterium tuberculosis H37Rv contain the metal binding motif (D/E)X(2)HX(approximately 100)(D/E)X(2)H characteristic of the soluble diiron enzyme superfamily. These putative acyl-ACP desaturase genes desA1 and desA2 were cloned from genomic DNA and expressed in Escherichia coli BL21(DE3). DesA1 was found to be insoluble, but in contrast, DesA2 was a soluble protein amenable to biophysical characterization. Here, we report the 2.0 A resolution X-ray structure of DesA2 determined by multiple anomalous dispersion (MAD) phasing from a Se-met derivative and refinement against diffraction data obtained on the native protein. The X-ray structure shows that DesA2 is a homodimeric protein with a four-helix bundle core flanked by five additional helices that overlay with 192 structurally equivalent amino acids in the structure of stearoyl-ACP Delta9 desaturase from castor plant with an rms difference 1.42 A. In the DesA2 crystals, one metal (likely Mn from the crystallization buffer) was bound in high occupancy at the B-site of the conserved metal binding motif, while the A-site was not occupied by a metal ion. Instead, the amino group of Lys-76 occupied this position. The relationships between DesA2 and known diiron enzymes are discussed.

Amino Acid Sequence↗
PubMed2004

Remarkable aliphatic hydroxylation by the diiron enzyme toluene 4-monooxygenase in reactions with radical or cation diagnostic probes norcarane, 1,1-dimethylcyclopropane, and 1,1-diethylcyclopropane.

Toluene 4-monooxygenase (T4MO) catalyzes the hydroxylation of toluene to yield 96% p-cresol. This diiron enzyme complex was used to oxidize norcarane (bicyclo[4.1.0]heptane), 1,1-dimethylcyclopropane, and 1,1-diethylcyclopropane, substrate analogues that can undergo diagnostic reactions upon the production of transient radical or cationic intermediates. Norcarane closely matches the shape and volume of the natural substrate toluene. Reaction of isoforms of the hydroxylase component of T4MO (T4moH) with different regiospecificities for toluene hydroxylation (k(cat) approximately 1.9-2.3 s(-)(1) and coupling efficiency approximately 81-96%) revealed similar catalytic parameters for norcarane oxidation (k(cat) approximately 0.3-0.5 s(-)(1) and coupling efficiency approximately 72%). The products included variable amounts of the un-rearranged isomeric norcaranols and cyclohex-2-enyl methanol, a product attributed to rearrangement of a radical oxidation intermediate. A ring-expansion product derived from the norcaranyl C-2 cation, cyclohept-3-enol, was not produced by either the natural enzyme or any of the T4moH isoforms tested. Comparative studies of 1,1-dimethylcyclopropane and 1,1-diethylcyclopropane, diagnostic substrates with differences in size and with approximately 50-fold slower k(cat) values, gave products consistent with both radical rearrangement and cation ring expansion. Examination of the isotopic enrichment of the incorporated O-atoms for all products revealed high-fidelity incorporation of an O-atom from O(2) in the un-rearranged and radical-rearranged products, while the O-atom found in the cation ring-expansion products was predominantly obtained by reaction with H(2)O. The results show a divergence of radical and cation pathways for T4moH-mediated hydroxylation that can be dissected by diagnostic substrate probe rearrangements and by changes in the source of oxygen used for substrate oxygenation.

Cations↗
PubMed2004

Solution structure of T4moC, the Rieske ferredoxin component of the toluene 4-monooxygenase complex.

Toluene 4-monooxygenase, a four-protein complex from Pseudomonas mendocina KR1, catalyzes the NADH- and O(2)-dependent hydroxylation of toluene to form p-cresol. The solution structure of the 112-amino-acid Rieske ferredoxin component, T4moC, was determined from 2D and 3D (1)H, (13)C, and (15)N NMR data. The structural model was refined through simulated annealing by molecular dynamics in torsion angle space with input from 1650 experimental restraints, including 1264 inter-proton distance restraints obtained from NOEs, 247 non-redundant intra-residue NOEs, 26 hydrogen bond restraints, and 113 dihedral angle ( phi, psi) restraints. The 20 calculated conformers that best satisfied the input restraints were submitted to refinement in explicit solvent to improve the stereochemical quality. With exclusion of ill-defined N- and C-terminal segments (Ser2; His111-Ser112) and residues near to the [2Fe-2S] cluster, the atomic root mean square deviation for the 20 conformers with respect to the mean coordinates was 1.09 A for the backbone and 1.60 A for all non-hydrogen atoms. The T4moC structure consists of 10 beta-strands arranged in the three anti-parallel beta-sheet topology observed in all Rieske [2Fe-2S] domain proteins. The S(gamma) of Cys45 and Cys64 and the N(delta1) of His47 and His67 provide the ligands to the [2Fe-2S] cluster of T4moC. (1)H-(15)N HSQC measurements show that both His47-N(epsilon2) and His67-N(epsilon2) are protonated at the pH of the NMR experiments. Comparisons are made between the present NMR structure, previous paramagnetic NMR studies of T4moC, and the X-ray structures of other members of the Rieske protein family.

Catalysis↗
PubMed2004

Crystallization and preliminary analysis of xenobiotic reductase B from Pseudomonas fluorescens I-C.

Single crystals have been obtained of xenobiotic reductase B (XenB), a flavoenzyme isolated and cloned from Pseudomonas fluorescens I-C. The enzyme catalyzes the NADPH-dependent elimination of nitrite from nitroglycerin with an approximately fivefold kinetic preference for the middle nitro group, primarily yielding 1,3-dinitroglycerol. X-ray diffraction data sets have been collected from native crystals to 2.3 A resolution. The space group is P4(1)2(1)2, with unit-cell parameters a = b = 140, c = 95.6 A. The asymmetric unit is likely to contain at least two XenB molecules (V(M) = 3.1 A(3) Da(-1), 60% solvent) and a molecular-replacement solution has been determined in order to solve the structure.

Crystallization↗
PubMed2004

Crystallization and preliminary analysis of xenobiotic reductase A and ligand complexes from Pseudomonas putida II-B.

Diffraction-quality crystals have been obtained of the xenobiotic reductase A (XenA) from Pseudomonas II-B, which was originally cultured from the contaminated soil of a World War II era munitions-manufacturing plant. Several complete X-ray diffraction data sets have been collected and analyzed. The native XenA data set includes reflections between 35 and 1.65 A. Four-wavelength MAD data sets from selenomethionine-enriched XenA and from three different ligand complexes are also reported. The XenA crystals belong to space group P2(1)2(1)2, with unit-cell parameters a = 84, b = 158, c = 57 A. Experimental phasing from analysis of the MAD data from selenomethionine-enriched XenA reveals the presence of two molecules in the asymmetric unit. They are related by a non-crystallographic 2(1) screw axis nearly parallel to the c axis, but offset by a quarter unit-cell translation. Thus, the local symmetry produces approximate systematic absences along the (00l) principal axis and complicates the space-group determination.

Bacterial Proteins↗
PubMed2004

Reactions of the diiron enzyme stearoyl-acyl carrier protein desaturase.

Stearoyl-acyl carrier protein Delta(9) desaturase (Delta9D) produces oleic acid, a nutritionally valuable fatty acid containing a cis double bond between C-9 and C-10. This multiprotein diiron enzyme complex reacts with stearoyl-acyl carrier protein, reduced [2Fe-2S] ferredoxin, and O(2) to complete the highly regiospecific and stereoselective desaturation reaction. Interactions with the acyl chain provide stability to the enzyme-substrate complex, give an energetic contribution to catalytic selectivity, and help to order the electron transfer, O(2) binding, and C-H bond cleavage steps of catalysis. Reactions with natural acyl chains indicate the involvement of a highly reactive diiron intermediate capable of oxidizing secondary C-H bonds (bond dissociation energy approximately 95 kcal/mol), but also capable of diagnostic O-atom transfer reactions with the appropriate substrate analogues. For soluble Delta9D, the natural reaction may initiate at the C-10 position, in contrast to the well-established initial reactivity of the membrane enzyme homologue stearoyl-coenzyme A (CoA) Delta(9) desaturase at the C-9 position.

Acyl Carrier Protein↗
PubMed2004

Production in two-liter beverage bottles of proteins for NMR structure determination labeled with either 15N- or 13C-15N.

The use of 2-L polyethylene terephthalate beverage bottles as a bacterial culture vessel has been recently introduced as an enabling technology for high-throughput structural biology [Sanville Millard, C. et al., 2003. Protein Express. Purif. 29, 311-320]. In the article following this one [Stols et al., this issue, pp. 95-102], this approach was elaborated for selenomethionine labeling used for multiwavelength anomalous dispersion phasing in the X-ray crystallographic determinations of protein structure. Herein, we report an effective and reproducible schedule for uniform 15N- and 13C-labeling of recombinant proteins in 2-L beverage bottles for structural determination by NMR spectroscopy. As an example, three target proteins selected from Arabidopsis thaliana were expressed in Escherichia coli Rosetta (DE3)/pLysS from a T7-based expression vector, purified, and characterized by electrospray ionization mass spectrometry and NMR analysis by 1H-15N heteronuclear single quantum correlation spectroscopy. The results show that expressions in the unlabeled medium provide a suitable control for estimation of the level of production of the labeled protein. Mass spectral characterizations show that the purified proteins contained a level of isotopic incorporation equivalent to the isotopically labeled materials initially present in the growth medium, while NMR analysis of the [U-15N]-labeled proteins provided a convenient method to assess the solution state properties of the target protein prior to production of a more costly double-labeled sample.

Arabidopsis Proteins↗
PubMed2003

Chain cleavage and sulfoxidation of thiastearoyl-ACP upon reaction with stearoyl-ACP desaturase.

The fatty acid analogues 9- and 10-thiastearate were converted to acyl-ACP derivatives by in vitro enzymatic synthesis and reacted with the reconstituted soluble stearoyl-ACP Delta9 desaturase complex. Electrospray ionization mass spectral analysis of the acyl chains purified from the reaction mixtures showed that 10-thiastearoyl-ACP was converted to the 10-sulfoxide as the sole product. In the presence of (18)O(2), the sulfoxide oxygen was found to be derived exclusively from O(2). This result confirms the ability of the soluble stearoyl-ACP desaturase to catalyze O atom transfer in the presence of the appropriate substrate analogue. Inhibition studies showed that 10-thiastearoyl-ACP was a mixed-type inhibitor of 18:0-ACP, with an apparent K(I) of approximately 10 microM. Comparable reactions of the stearoyl-ACP desaturase complex with 9-thiastearoyl-ACP gave the 9-sulfoxide as approximately 5% of the total products, with the O atom again exclusively derived from O(2). The remaining 95% of the total products arose from an acyl chain cleavage reaction between S-9 and C-10. Matrix-assisted laser desorption ionization time-of-flight mass spectral analysis showed that 9-thiastearoyl-ACP had a mass of 9443 amu while the acyl chain cleavage product had a mass of 9322 amu, corresponding to the calculated mass of 8-mercaptooctanoyl-ACP. Recovery of the acyl chain from the ACP product gave the disulfide of 8-mercaptooctanoate (mass of 349.1 amu), arising from the dimerization of 8-mercaptooctanoate during product workup. Gas chromatography-mass spectral analysis also showed the accumulation of nonanal in sealed reaction vials, accounting for the other product of the acyl chain cleavage reaction. The reactivity at both the 9 and 10 positions of the thia-substituted acyl-ACPs is consistent with the proximity of both positions to the diiron center oxidant in the enzyme-substrate complex. Moreover, the differential reactivity of the 9- and 10-thiastearoyl-ACPs also suggests position-dependent consequences of the reaction within the Delta9D active site. Mechanisms accounting for both sulfoxidation and acyl cleavage reactions by the stearoyl-ACP Delta9 desaturase are proposed.

Acyl Carrier Protein↗
PubMed2003

Rapid-mix and chemical quench studies of ferredoxin-reduced stearoyl-acyl carrier protein desaturase.

Stearoyl-ACP Delta9 desaturase (Delta9D) catalyzes the NADPH- and O(2)-dependent insertion of a cis double bond between the C9 and C10 positions of stearoyl-ACP (18:0-ACP) to produce oleoyl-ACP (18:1-ACP). This work revealed the ability of reduced [2Fe-2S] ferredoxin (Fd) to act as a catalytically competent electron donor during the rapid conversion of 18:0-ACP into 18:1-ACP. Experiments on the order of addition for substrate and reduced Fd showed high conversion of 18:0-ACP to 18:1-ACP (approximately 95% per Delta9D active site in a single turnover) when 18:0-ACP was added prior to reduced Fd. Reactions of the prereduced enzyme-substrate complex with O(2) and the oxidized enzyme-substrate complex with reduced Fd were studied by rapid-mix and chemical quench methods. For reaction of the prereduced enzyme-substrate complex, an exponential burst phase (k(burst) = 95 s(-1)) of product formation accounted for approximately 90% of the turnover expected for one subunit in the dimeric protein. This rapid phase was followed by a slower phase (k(linear) = 4.0 s(-1)) of product formation corresponding to the turnover expected from the second subunit. For reaction of the oxidized enzyme-substrate complex with excess reduced Fd, a slower, linear rate (k(obsd) = 3.4 s(-1)) of product formation was observed over approximately 1.5 turnovers per Delta9D active site potentially corresponding to a third phase of reaction. An analysis of the deuterium isotope effect on the two rapid-mix reaction sequences revealed only a modest effect on k(burst) ((D)k(burst) approximately 1.5) and k(linear) (D)k(linear) approximately 1.4), indicating C-H bond cleavage does not contribute significantly to the rate-limiting steps of pre-steady-state catalysis. These results were used to assemble and evaluate a minimal kinetic model for Delta9D catalysis.

Acyl Carrier Protein↗