PubMed Health⌕ Search

Biomedical subjects

Brian R Gibney

Publications and source records attributed to Brian R Gibney.

17 recordsLinked to original sources
PubMed2007

Thermodynamic investigation into the mechanisms of proton-coupled electron transfer events in heme protein maquettes.

To study the engineering requirements for proton pumping in energy-converting enzymes such as cytochrome c oxidase, the thermodynamics and mechanisms of proton-coupled electron transfer in two designed heme proteins are elucidated. Both heme protein maquettes chosen, heme b-[H10A24]2 and heme b-[delta7-His]2, are four-alpha-helix bundles that display pH-dependent heme midpoint potential modulations, or redox-Bohr effects. Detailed equilibrium binding studies of ferric and ferrous heme b with these maquettes allow the individual contributions of heme-protein association, iron-histidine ligation, and heme-protein electrostatics to be elucidated. These data demonstrate that the larger, less well-structured [H10A24]2 binds heme b in both oxidation states tighter than the smaller and more well-structured [Delta7-His]2 due to a stronger porphyrin-protein hydrophobic interaction. The 66 mV (1.5 kcal/mol) difference in their heme reduction potentials observed at pH 8.0 is due mostly to stabilization of ferrous heme in [H10A24]2 relative to [delta7-His]2. The data indicate that porphyrin-protein hydrophobic interactions and heme iron coordination are responsible for the Kd value of 37 nM for the heme b-[delta7-His]2 scaffold, while the affinity of heme b for [H10A24]2 is 20-fold tighter due to a combination of porphyrin-protein hydrophobic interactions, iron coordination, and electrostatic effects. The data also illustrate that the contribution of bis-His coordination to ferrous heme protein affinity is limited, <3.0 kcal/mol. The 1H+/1e- redox-Bohr effect of heme b-[H10A24]2 is due to the greater absolute stabilization of the ferric heme (4.1 kcal/mol) compared to the ferrous heme (1.4 kcal/mol) binding upon glutamic acid deprotonation, i.e., an electrostatic response mechanism. The 2H+/1e- redox-Bohr effect observed for heme b-[delta7-His]2 is due to histidine protonation and histidine dissociation of ferrous heme b upon reduction, i.e., a ligand loss mechanism. These results indicate that the contribution of porphyrin-protein hydrophobic interactions to heme affinity is critical to maintaining the heme bound in both oxidation states and eliciting an electrostatic response from these designed heme protein scaffolds.

Electron Transport↗
PubMed2006

Femtomolar Zn(II) affinity in a peptide-based ligand designed to model thiolate-rich metalloprotein active sites.

Metal-ligand interactions are critical components of metalloprotein assembly, folding, stability, electrochemistry, and catalytic function. Research over the past 3 decades on the interaction of metals with peptide and protein ligands has progressed from the characterization of amino acid-metal and polypeptide-metal complexes to the design of folded protein scaffolds containing multiple metal cofactors. De novo metalloprotein design has emerged as a valuable tool both for the modular synthesis of these complex metalloproteins and for revealing the fundamental tenets of metalloprotein structure-function relationships. Our research has focused on using the coordination chemistry of de novo designed metalloproteins to probe the interactions of metal cofactors with protein ligands relevant to biological phenomena. Herein, we present a detailed thermodynamic analysis of Fe(II), Co(II), Zn(II), and[4Fe-4S]2(+/+) binding to IGA, a 16 amino acid peptide ligand containing four cysteine residues, H2N-KLCEGG-CIGCGAC-GGW-CONH2. These studies were conducted to delineate the inherent metal-ion preferences of this unfolded tetrathiolate peptide ligand as well as to evaluate the role of the solution pH on metal-peptide complex speciation. The [4Fe-4S]2(+/+)-IGA complex is both an excellent peptide-based synthetic analogue for natural ferredoxins and is flexible enough to accommodate mononuclear metal-ion binding. Incorporation of a single ferrous ion provides the FeII-IGA complex, a spectroscopic model of a reduced rubredoxin active site that possesses limited stability in aqueous buffers. As expected based on the Irving-Williams series and hard-soft acid-base theory, the Co(II) and Zn(II) complexes of IGA are significantly more stable than the Fe(II) complex. Direct proton competition experiments, coupled with determinations of the conditional dissociation constants over a range of pH values, fully define the thermodynamic stabilities and speciation of each MII-IGA complex. The data demonstrate that FeII-IGA and CoII-IGA have formation constant values of 5.0 x 10(8) and 4.2 x 10(11) M-1, which are highly attenuated at physiological pH values. The data also evince that the formation constant for ZnII-IGA is 8.0 x 10(15) M-1, a value that exceeds the tightest natural protein Zn(II)-binding affinities. The formation constant demonstrates that the metal-ligand binding energy of a ZnII(S-Cys)4 site can stabilize a metalloprotein by -21.6 kcal/mol. Rigorous thermodynamic analyses such as those demonstrated here are critical to current research efforts in metalloprotein design, metal-induced protein folding, and metal-ion trafficking.

Binding Sites↗
PubMed2006

Frequency-switching inversion-recovery for severely hyperfine-shifted NMR: evidence of asymmetric electron relaxation in high-spin Co(II).

A new method for reliably measuring longitudinal relaxation rates for severely hyperfine-shifted NMR signals in aqueous solutions is presented. The method is illustrated for a well-defined cobalt tetracysteinate, with relevance to cobalt-substituted metalloproteins. The relaxation measurements are indicative of asymmetric electronic relaxation of the high-spin Co(II) ion.

Journal Article↗
PubMed2006

Evaluating the roles of the heme a side chains in cytochrome c oxidase using designed heme proteins.

Heme a is a redox cofactor unique to cytochrome c oxidases and vital to aerobic respiration. Heme a differs from the more common heme b by two chemical modifications, the C-8 formyl group and the C-2 hydroxyethylfarnesyl group. The effects of these porphyrin substituents on ferric and ferrous heme binding and electrochemistry were evaluated in a designed heme protein maquette. The maquette scaffold chosen, [Delta7-H3m](2), is a four-alpha-helix bundle that contains two bis(3-methyl-l-histidine) heme binding sites with known absolute ferric and ferrous heme b affinities. Hemes b, o, o+16, and heme a, those involved in the biosynthesis of heme a, were incorporated into the bis(3-methyl-l-histidine) heme binding sites in [Delta7-H3m](2). Spectroscopic analyses indicate that 2 equiv of each heme binds to [Delta7-H3m](2), as designed. Equilibrium binding studies of the hemes with the maquette demonstrate the tight affinity for hemes containing the C-2 hydroxyethylfarnesyl group in both the ferric and ferrous forms. Coupled with the measured equilibrium midpoint potentials, the data indicate that the hydroxyethylfarnesyl group stabilizes the binding of both ferrous and ferric heme by at least 6.3 kcal/mol via hydrophobic interactions. The data also demonstrate that the incorporation of the C-8 formyl substituent in heme a results in a 179 mV, or 4.1 kcal/mol, positive shift in the heme reduction potential relative to heme o due to the destabilization of ferric heme binding relative to ferrous heme binding. The two substituents appear to counterbalance each other to provide for tighter heme a affinity relative to heme b in both the ferrous and ferric forms by at least 6.3 and 2.1 kcal/mol, respectively. These results also provide a rationale for the reaction sequence observed in the biosynthesis of heme a.

Animals↗
PubMed2006

Evaluation of electron-withdrawing group effects on heme binding in designed proteins: implications for heme a in cytochrome c oxidase.

Heme a, the metalloporphyrin cofactor unique to cytochrome c oxidases, differs from the more common heme b by two chemical modifications, a C-2 hydroxyethylfarnesyl group and a C-8 formyl group. To elucidate a role of the C-8 formyl group, we compare the heme affinity, spectroscopy, and electrochemistry of a heme a mimic, Fe(diacetyldeuterioporphyrin IX) or Fe(DADPIX), with heme b, Fe(protoporphryrin IX) or Fe(PPIX), incorporated into a designed heme protein. The [Delta7-H3m]2 protein ligand, or maquette, selected for this study contains two equivalent bis-(3-methyl-L-histidine) heme binding sites within a four-alpha-helix bundle scaffold. The spectroscopic data on Fe(PPIX) and Fe(DADPIX) bound to [Delta7-H3m]2 demonstrate that these complexes are excellent synthetic analogues for natural cytochromes b and a, respectively. Comparison of the spectroscopic, electrochemical, and equilibrium thermodynamic data measured for the Fe(PPIX)-[Delta7-H3m]2 maquette with the previously reported Fe(PPIX)-[Delta7-His]2 complex demonstrates that changing the heme axial ligands to 3-methyl-L-histidine from L-histidine does not alter the resulting heme protein properties significantly in either oxidation state. Heme binding studies demonstrate that [Delta7-H3m]2 binds two ferrous Fe(DADPIX) or Fe(PPIX) moieties with similar dissociation constant values. However, in the ferric state, the data show that [Delta7-H3m]2 only binds a single Fe(DADPIX) and that one 2500-fold weaker than oxidized Fe(PPIX). The data demonstrate that the 4.6 kcal mol(-1) weakened affinity of [Delta7-H3m]2 for oxidized Fe(DADPIX) results in the majority of the 160 mV, 3.7 kcal mol(-1), positive shift in the heme reduction potential relative to Fe(PPIX). These data indicate that a role of the formyl group on heme a is to raise the iron reduction potential, thus making it a better electron acceptor, but that it does so by destabilizing the affinity of bis-imidazole sites for the ferric state.

Circular Dichroism↗
PubMed2006

Crystal structures of catalytic complexes of the oxidative DNA/RNA repair enzyme AlkB.

Nucleic acid damage by environmental and endogenous alkylation reagents creates lesions that are both mutagenic and cytotoxic, with the latter effect accounting for their widespread use in clinical cancer chemotherapy. Escherichia coli AlkB and the homologous human proteins ABH2 and ABH3 (refs 5, 7) promiscuously repair DNA and RNA bases damaged by S(N)2 alkylation reagents, which attach hydrocarbons to endocyclic ring nitrogen atoms (N1 of adenine and guanine and N3 of thymine and cytosine). Although the role of AlkB in DNA repair has long been established based on phenotypic studies, its exact biochemical activity was only elucidated recently after sequence profile analysis revealed it to be a member of the Fe-oxoglutarate-dependent dioxygenase superfamily. These enzymes use an Fe(II) cofactor and 2-oxoglutarate co-substrate to oxidize organic substrates. AlkB hydroxylates an alkylated nucleotide base to produce an unstable product that releases an aldehyde to regenerate the unmodified base. Here we have determined crystal structures of substrate and product complexes of E. coli AlkB at resolutions from 1.8 to 2.3 A. Whereas the Fe-2-oxoglutarate dioxygenase core matches that in other superfamily members, a unique subdomain holds a methylated trinucleotide substrate into the active site through contacts to the polynucleotide backbone. Amide hydrogen exchange studies and crystallographic analyses suggest that this substrate-binding 'lid' is conformationally flexible, which may enable docking of diverse alkylated nucleotide substrates in optimal catalytic geometry. Different crystal structures show open and closed states of a tunnel putatively gating O2 diffusion into the active site. Exposing crystals of the anaerobic Michaelis complex to air yields slow but substantial oxidation of 2-oxoglutarate that is inefficiently coupled to nucleotide oxidation. These observations suggest that protein dynamics modulate redox chemistry and that a hypothesized migration of the reactive oxy-ferryl ligand on the catalytic Fe ion may be impeded when the protein is constrained in the crystal lattice.

Alkylation↗
PubMed2004

Design of a five-coordinate heme protein maquette: a spectroscopic model of deoxymyoglobin.

The substitution of 1-methyl-l-histidine for the histidine heme ligands in a de novo designed four-alpha-helix bundle scaffold results in conversion of a six-coordinate cytochrome maquette into a self-assembled five-coordinate mono-(1-methyl-histidine)-ligated heme as an initial maquette for the dioxygen carrier protein myoglobin. UV-vis, magnetic circular dichroism, and resonance Raman spectroscopies demonstrate the presence of five-coordinate mono-(1-methyl-histidine) ligated ferrous heme spectroscopically similar to deoxymyoglobin. Thermodynamic analysis of the ferric and ferrous heme dissociation constants indicates greater destabilization of the ferric state than the ferrous state. The ferrous heme protein reacts with carbon monoxide to form a (1-methyl-histidine)-Fe(II)(heme)-CO complex; however, reaction with dioxygen leads to autoxidation and ferric heme dissociation. These results indicate that negative protein design can be used to generate a five-coordinate heme within a maquette scaffold.

Carbon Monoxide↗
PubMed2004

Specular neutron reflectivity and the structure of artificial protein maquettes vectorially oriented at interfaces.

Artificial peptides can be designed to possess a variety of functionalities. If these peptides can be ordered in an ensemble, the functionality can impart macroscopic material properties to the ensemble. Neutron reflectivity is shown to be an effective probe of the intramolecular structures of such peptides vectorially oriented at an interface, key to ensuring that the designed molecular structures translate into the desired material properties of the interface. A model-independent method is utilized to analyze the neutron reflectivity from an alkylated, di- alpha -helical peptide, containing perdeuterated leucine residues at one or two pre-selected positions, in mixed Langmuir monolayers with a phospholipid. The results presented here are more definitive than prior work employing x-ray reflectivity. They show explicitly that the di-helical peptide retains its designed alpha -helical secondary structure at the interface, when oriented perpendicular to the interface at high surface pressure, with the helices projecting into the aqueous subphase without penetrating the layer of phospholipid headgroups.

Lipid Bilayers↗
PubMed2004

Comparison of cysteine and penicillamine ligands in a Co(II) maquette.

l-Penicillamine (Pen) has been investigated as a ligand for metalloprotein design by examining the binding of Co(II) to the sequence NH(2)-KL(Pen)EGG.(Pen)IG(Pen)GA(Pen).GGW-CONH(2). For comparison, we have studied Co(II) binding to the analogous sequence with Cys ligands, the ferredoxin maquette ligand IGA that was originally designed to bind a [4Fe-4S] cluster. The Co(II) affinity and UV-vis spectroscopic properties of IGA indicate formation of a pseudotetrahedral tetrathiolate ligated Co(II). In contrast, IGA-Pen showed formation of a pseudotetrahedral complex with Co(II) bound by three Pen ligands and an exogenous H(2)O. EXAFS data on both Co(II) complexes confirms not only the proposed primary coordination spheres but also shows six Co(II)-C(beta) methyl group distances in Co(II)-IGA-Pen. These results demonstrate that ligand sterics in simple peptides can be designed to provide asymmetric coordination spheres such as those commonly observed in natural metalloproteins.

Amino Acid Sequence↗
PubMed2004

Cobalt(II) and zinc(II) binding to a ferredoxin maquette.

We have examined the Co(II) and Zn(II) affinity of the prototype ferredoxin maquette ligand, NH(2)-KLCEGG.CIACGAC.GGW-CONH2 (IAA), which was originally designed to bind a [4Fe-4S] cluster. UV-Vis spectroscopy demonstrates tight 1:1 complex formation between Co(II) and IAA. The intensity of the S-->Co(II) charge transfer bands at 304 and 340 nm and the ligand field bands between 630 and 728 nm indicate Co(II) coordination by the four cysteine thiolates of IAA in a pseudo-tetrahedral geometry. A dissociation constant value of 5.3 microM was determined for the Co(II)-IAA complex at pH 6.5. Zn(II) readily displaces Co(II) from IAA as evinced by loss of the Co(II) spectral features. The dissociation constant for Zn(II), 20 pM at pH 6.5, was determined be competition experiments with Co(II)-IAA. These results demonstrate that the ferredoxin maquette ligand is an excellent ligand for Zn(II).

Cobalt↗
PubMed2003

X-ray structure of a maquette scaffold.

Maquettes are de novo designed mimicries of nature used to test the construction and engineering criteria of oxidoreductases. One type of scaffold used in maquette construction is a four-alpha-helical bundle. The sequence of the four-alpha-helix bundle maquettes follows a heptad repeat pattern typical of left-handed coiled-coils. Initial designs were molten globular due partly to the minimalist approach taken by the designers. Subsequent iterative redesign generated several structured scaffolds with similar heme binding properties. Variant [I(6)F(13)](2), a structured scaffold, was partially resolved with NMR spectroscopy and found to have a set of mobile inter-helical packing interfaces. Here, the X-ray structure of a similar peptide ([I(6)F(13)M(31)](2) i.e. ([CGGG EIWKL HEEFLKK FEELLKL HEERLKKM](2))(2) which we call L31M), has been solved using MAD phasing and refined to 2.8A resolution. The structure shows that the maquette scaffold is an anti-parallel four-helix bundle with "up-up-down-down" topology. No pre-formed heme-binding pocket exists in the protein scaffold. We report unexpected inter-helical crossing angles, residue positions and translations between the helices. The crossing angles between the parallel helices are -5 degrees rather than the expected +20 degrees for typical left-handed coiled-coils. Deviation of the scaffold from the design is likely due to the distribution and size of hydrophobic residues. The structure of L31M points out that four identical helices may interact differently in a bundle and heptad repeats with an alternating [HPPHHPP]/[HPPHHPH] (H: hydrophobic, P: polar) pattern are not a sufficient design criterion to generate left-hand coiled-coils.

Amino Acid Sequence↗
PubMed2002

Proton coupling to [4Fe-4S](2+/+) and [4Fe-4Se](2+/+) oxidation and reduction in a designed protein.

The coupling of a single proton to [4Fe-4S]2+/+ oxidation/reduction in a de novo designed iron-sulfur protein maquette is presented. The reduced state pKared is 9.3, and the oxidized state pKaox is <6.5. The reduced state pKared shifts to 8.3 upon incorporation of a [4Fe-4Se]2+/+ cluster, implicating the cluster itself or its primary coordination sphere as the proton-coupling site.

Electron Spin Resonance Spectroscopy↗
PubMed2002

Nonnatural amino acid ligands in heme protein design.

The de novo design, synthesis, and characterization of a four-alpha-helix bundle scaffold containing heme ligated by 4-beta-(pyridyl)-l-alanine (Pal) is presented. The protein scaffold is highly helical, stable, and conformationally specific in the apo-state. Incorporation of heme using the designed bis-Pal axial ligation is shown using UV-visible and EPR spectroscopies. The observed heme midpoint reduction potential, +58 mV versus SHE, is 287 mV (6.8 kcal/mol) higher than the analogous bis-histidine-ligated heme protein.

Alanine↗
PubMed2002

Design and spectroscopic characterization of peptide models for the plastocyanin copper-binding loop.

The Cu(II)- and Co(II)-binding properties of two peptides, designed on the basis of the active site sequence and structure of the blue copper protein plastocyanin, are explored. Peptide BCP-A, Ac-Trp-(Gly)(3)-Ser-Tyr-Cys-Ser-Pro-His-Gln-Gly-Ala-Gly-Met-(Gly )(3)-His-(Gly)(2)-Lys-CONH(2), conserves the Cu-binding loop of plastocyanin containing three of the four copper ligands and has a flexible (Gly)(3) linker to the second His ligand. Peptide BCP-B, Ac-Trp-(Gly)(3)-Cys-Gly-His-Gly-Val-Pro-Ser-His-Gly-Met-Gly-CONH(2), contains all four blue copper ligands, with two on either side of a beta-turn. Both peptides form 1:1 complexes with Cu(II) through His and Cys ligands. BCP-A, the ligand loop, binds to Cu(II) in a tetrahedrally distorted square plane with axial solvent ligation, while BCP-B-Cu(II) has no tetrahedral distortion in aqueous solution. In methanolic solution, distortion of the square plane is evident for both BCP-Cu(II) complexes. Tetrahedral Co(II) complexes are observed for both peptides in aqueous solution but with 4:2 peptide:Co(II) stoichiometries as estimated by ultracentrifugation. Cu(II) reduction potentials for the aqueous peptide-Cu(II) complexes were measured to be +75 +/- 30 mV vs NHE for BCP-A-Cu(II) and -10 +/- 20 mV vs NHE for BCP-B-Cu(II). The results indicate that the plastocyanin ligand loop can act as a metal-binding site with His and Cys ligands in the absence of the remainder of the folded protein but, by itself, cannot stabilize a type 1 copper site, emphasizing the role of the protein matrix in protecting the Cu binding site from solvent exposure and the Cys from oxidation.

Algorithms↗