PubMed Health⌕ Search

Biomedical subjects

Brian T Cunningham

Publications and source records attributed to Brian T Cunningham.

5 recordsLinked to original sources

Amplification of RNA for identification of Zika and HCV in whole blood.

Direct RNA amplification from whole blood is fundamentally limited by rapid enzymatic degradation and inhibitory matrix effects. Here, we present a blood drying protocol that enables sensitive and robust RNA detection without the need for extraction, purification, or cold-chain logistics. Using whole blood, the platform achieves high detection sensitivity, down to 10 copies per microliter for Zika virus and 1 international unit per microliter for hepatitis C virus (HCV). We further demonstrate that the protocol can be scaled to larger blood volumes and achieve single-copy sensitivity without any sample loss. This is accomplished through thermal treatments of the sample combined with a primer-limited reverse transcription step, which together stabilize RNA within a dried blood matrix and permit spatially resolved enzymatic amplification. The system supports multiplexed detection from a single sample, enabling simultaneous identification of multiple targets. Separately, we introduce a concept wherein the very few copies of the preserved RNA within the matrix can be accessed repeatedly for molecular analysis. Furthermore, we demonstrated the detection of Zika and HCV using a portable fluorometer for point-of-care (POC) uses. With lyophilized reagents and minimal instrumentation such as a heater and an inexpensive portable fluorometer, this platform enables robust, reusable, and field-deployable diagnostics, advancing toward truly accessible on-site RNA testing in urgent care or low-resource settings from whole blood.

Humans↗

Optically tunable guided-mode resonance filter.

We have demonstrated a guided-mode resonance filter (GMRF) whose properties are tunable with laser illumination through the incorporation of a nonlinear dye. Laser illumination causes a change in the refractive index of the dye-doped portion of the structure, leading to controlled tuning of the GMRF reflectance spectrum. Changes in the refractive index of dye-doped regions are proportional to the intensity of the incident laser beam and are as high as Delta n = 0.09. The reflectance tuning effect occurs on a time scale of many seconds and is completely reversible upon termination of the laser illumination.

Journal Article↗

Single-step fabrication and characterization of photonic crystal biosensors with polymer microfluidic channels.

A method for simultaneously integrating label-free photonic crystal biosensor technology into microfluidic channels by a single-step replica molding process is presented. By fabricating both the sub-micron features of the photonic crystal sensor structure and the >10 microm features of a flow channel network in one step at room temperature on a plastic substrate, the sensors are automatically self-aligned with the flow channels, and patterns of arbitrary shape may be produced. By measuring changes in the resonant peak reflected wavelength from the photonic crystal structure induced by changes in dielectric permittivity within an evanescent field region near its surface, detection of bulk refractive index changes in the fluid channel or adsorption of biological material to the sensor surface is demonstrated. An imaging detection instrument is used to characterize the spatial distribution of the photonic crystal resonant wavelength, gathering thousands of independent sensor readings within a single fluid channel.

Biosensing Techniques↗

Microplate-based, label-free detection of biomolecular interactions: applications in proteomics.

This review describes a new type of label-free optical biosensor that is inexpensively manufactured from continuous sheets of plastic film and incorporated into standard format microplates to enable highly sensitive, high-throughput detection of small molecules, proteins and cells. The biosensor and associated detection instrumentation are applied to review two fundamental limiting issues for assays in proteomics research and drug discovery: requirement for quantitative measurement of protein concentration and specific activity, and measurements made with complex systems in highly parallel measurements. SRU BIosystems, Inc.'s BIND label-free detection will address these issues using data examples for hybridoma screening, epitope binning and mapping, small-molecule screening, and cell-based functional assays. The review describes several additional applications that are under development for the system, and the key issues that will drive adoption of the technology over the next 5 years.

Biosensing Techniques↗

Label-free assays on the BIND system.

Screening of biochemical interactions becomes simpler, less expensive, and more accurate when labels, such as fluorescent dyes, radioactive markers, and colorimetric reactions, are not required to quantify detected material. SRU Biosystems has developed a biosensor technology that is manufactured on continuous sheets of plastic film and incorporated into standard microplates and microarray slides to enable label-free assays to be performed with high throughput, high sensitivity, and low cost per assay. The biosensor incorporates a narrow band guided-mode resonance reflectance filter, in which the reflected color is modulated by the attachment/detachment of biochemical material to the surface. The technology offers 4 orders of linear dynamic range and uniformity within a plate, with a coefficient of variation of 2.5%. Using conventional biochemical immobilization surface chemistries, a wide range of assay applications are enabled. Small molecule screening, cell proliferation/cytotoxicity, enzyme activity screening, protein-protein interaction, and cell membrane receptor expression are among the applications demonstrated.

Animals↗