PubMed Health⌕ Search

Biomedical subjects

Brian T Mayers

Publications and source records attributed to Brian T Mayers.

8 recordsLinked to original sources

Construction of electrocatalytic electrodes bearing the triphenylamine nucleus covalently bound to carbon. A halogen dance in protonated aminotriphenylamines.

[reaction: see text]. The triarylamine nucleus has been attached to a carbon fiber electrode by diazotization of an aminotriphenylamine followed by electrochemical reduction. The resulting electrodes can electrocatalyze the oxidation of organic substrates. In acid, 4-amino-4',4' '-dibromotriphenylamine undergoes dismutation into a mixture of amines containing from 0 to 3 bromine atoms.

Journal Article↗

Combined microfluidic-micromagnetic separation of living cells in continuous flow.

This paper describes a miniaturized, integrated, microfluidic device that can pull molecules and living cells bound to magnetic particles from one laminar flow path to another by applying a local magnetic field gradient, and thus selectively remove them from flowing biological fluids without any wash steps. To accomplish this, a microfabricated high-gradient magnetic field concentrator (HGMC) was integrated at one side of a microfluidic channel with two inlets and outlets. When magnetic micro- or nano-particles were introduced into one flow path, they remained limited to that flow stream. In contrast, when the HGMC was magnetized, the magnetic beads were efficiently pulled from the initial flow path into the collection stream, thereby cleansing the original fluid. Using this microdevice, living E. coli bacteria bound to magnetic nanoparticles were efficiently removed from flowing solutions containing densities of red blood cells similar to that found in blood. Because this microdevice allows large numbers of beads and cells to be sorted simultaneously, has no capacity limit, and does not lose separation efficiency as particles are removed, it may be especially useful for separations from blood or other clinical samples. This on-chip HGMC-microfluidic separator technology may potentially allow cell separations to be carried out in the field outside of hospitals and clinical laboratories.

Cell Separation↗

Optical waveguiding in suspensions of dielectric particles.

An optical waveguide formed by a suspension of dielectric nanoparticles in a microchannel is described. The suspensions, chosen for their guiding and scattering properties, are silica and polystyrene particles that have diameters of 30-900 nm and are dispersed in water with volume fractions up to 10%. Changing the diameter and concentration of the particles causes the suspensions to transition from Rayleigh to Mie scattering and from single to multiple scattering. The threshold for optical guiding in a waveguide core composed of these suspensions is set by the numerical aperture of the effective refractive-index difference introduced by the suspension and not by the average interparticle distance.

Journal Article↗

Some recent developments in the chemical synthesis of inorganic nanotubes.

Inorganic nanotubes have been a subject of intensive research in the past decade. We recently developed a number of synthetic strategies for generating nanotubes from inorganic materials that do not have a layered structure. It is the intention of this contribution to provide a brief account of these research activities.

Journal Article↗

A low-threshold, high-efficiency microfluidic waveguide laser.

This communication describes a long (1 cm), laser-pumped, liquid core-liquid cladding (L2) waveguide laser. This device provides a simple, high intensity, tunable light source for microfludic applications. Using a core solution of 2 mM rhodamine 640 perchlorate, optically pumped by a frequency-doubled Nd:YAG laser, we found that the threshold for lasing was as low as 22 muJ (16-ns pulse length) and had a slope efficiency up to 20%. The output wavelength was tunable over a 20-nm range by changing the ratio of solvent components (dimethyl sulfoxide and methanol) in the liquid core.

Equipment Design↗

Arrays and cascades of fluorescent liquid-liquid waveguides: broadband light sources for spectroscopy in microchannels.

This paper describes the fabrication and operation of fluidic broadband light sources for use "on-chip" in integrated microanalytical systems. These light sources consist of liquid-core, liquid-cladding (L2) microchannel waveguides with liquid cores containing fluorescent dyes, excited by incident light from an external halogen bulb. Simultaneous use of multiple fluorophores in a common solution, in a single L2 light source, is not possible, because energy transfer from fluorophores emitting at shorter wavelength to fluorophores emitting at longer wavelength is essentially complete. Two approaches circumvent this problem of energy transfer; both use spatial separation of the fluorophores in different streams. The first setup uses a cascade (series) of single-core, single-dye light sources of increasing absorption energy to generate a combined broadband output. The second approach uses a parallel array of single-core, single-dye light sources. The spectral content of the light output for both cascade and array light sources can be controlled through choice of flow rates and dyes. Output intensity from these light sources is comparable to standard fiber-optic spectrophotometer light sources. The paper also discusses the efficiency of energy transfer between parallel liquid cores as a function of the fluid medium (index of refraction, path length, and rate of flow).

Journal Article↗

Approaching zero: using fractured crystals in metrology for replica molding.

This report presents a simple and convenient method to generate nanoscale fractures (cracks) in smooth, single-crystalline Si substrates. The cracks propagated as approximately straight lines along the {100} crystal planes with controllable length defined by a stabilizing backlayer. Close to its tip, the crack presented a vertical offset of the two planes as step of smoothly decreasing height, ranging from the microscale to the atomic scale. The edges of a crack were in close contact at the tip of the crack but were separated at the edge where the crack was initiated. These steps served as ideal test features for probing the limits of the replication of soft lithography. Analysis of topography of original and replicated features (in "hard" poly(dimethylsiloxane and polyurethane) by atomic force microscopy demonstrated that steps down to 0.4 nm could be reproduced; these features approach the dimensions of atoms.

Crystallization↗

Dynamic control of liquid-core/liquid-cladding optical waveguides.

This report describes the manipulation of light in waveguides that comprise a liquid core and a liquid cladding (liq/liq waveguide). These waveguides are dynamic: Their structure and function depend on a continuous, laminar flow of the core and cladding liquids. Because they are dynamic, they can be reconfigured and adapted continuously in ways that are not possible with solid-state waveguides. The liquids are introduced into the channels of a microfluidic network designed to sandwich the flowing core liquid between flowing slabs of the cladding fluid. At low and moderate Reynolds numbers, flow is laminar, and the liq/liq interfaces are optically smooth. Small irregularities in the solid walls of the channels do not propagate into these interfaces, and liq/liq waveguides therefore exhibit low optical loss because of scattering. Manipulating the rate of flow and the composition of the liquids tunes the characteristics of these optical systems.

Journal Article↗