PubMed Health⌕ Search

Biomedical subjects

Brian W Matthews

Publications and source records attributed to Brian W Matthews.

16 recordsLinked to original sources
PubMed2003

Repacking the Core of T4 lysozyme by automated design.

Automated protein redesign, as implemented in the program ORBIT, was used to redesign the core of phage T4 lysozyme. A total of 26 buried or partially buried sites in the C-terminal domain were allowed to vary both their sequence and side-chain conformation while the backbone and non-selected side-chains remained fixed. A variant with seven substitutions ("Core-7") was identified as having the most favorable energy. The redesign experiment was repeated with a penalty for the presence of methionine residues. In this case the redesigned protein ("Core-10") had ten amino acid changes. The two designed proteins, as well as the constituent single mutants, and several single-site revertants were over-expressed in Escherichia coli, purified, and subjected to crystallographic and thermal analyses. The thermodynamic and structural data show that some repacking was achieved although neither redesigned protein was more stable than the wild-type protein. The use of the methionine penalty was shown to be effective. Several of the side-chain rotamers in the predicted structure of Core-10 differ from those observed. Rather than changing to new rotamers predicted by the design process, side-chains tend to maintain conformations similar to those seen in the native molecule. In contrast, parts of the backbone change by up to 2.8A relative to both the designed structure and wild-type. Water molecules that are present within the lysozyme molecule were removed during the design process. In the redesigned protein the resultant cavities were, to some degree, re-occupied by side-chain atoms. In the observed structure, however, water molecules were still bound at or near their original sites. This suggests that it may be preferable to leave such water molecules in place during the design procedure. The results emphasize the specificity of the packing that occurs within the core of a typical protein. While point substitutions within the core are tolerated they almost always result in a loss of stability. Likewise, combinations of substitutions may also be tolerated but usually destabilize the protein. Experience with T4 lysozyme suggests that a general core repacking methodology with retention or enhancement of stability may be difficult to achieve without provision for shifts in the backbone.

Automation↗
PubMed2003

Long-distance conformational changes in a protein engineered by modulated sequence duplication.

There are few, if any, known instances in which a biological signal is transmitted via a large conformational change through the body of a protein. We describe here a mutant of T4 lysozyme that was engineered to permit structural change at a distance. The design uses a tandem sequence repeat that makes it possible to transmit large-scale structural changes from one end of an alpha-helix to the other over a distance of 17-25 A. The method should be of general applicability and may make it possible to introduce a mutation at one site in a protein that will induce large-scale changes in the structure at a spatially remote site.

Binding Sites↗
PubMed2003

Kinetic and spectroscopic characterization of the H178A methionyl aminopeptidase from Escherichia coli.

To gain insight into the role of the strictly conserved histidine residue, H178, in the reaction mechanism of the methionyl aminopeptidase from Escherichia coli (EcMetAP-I), the H178A mutant enzyme was prepared. Metal-reconstituted H178A binds only one equivalent of Co(II) or Fe(II) tightly with affinities that are identical to the WT enzyme based on kinetic and isothermal titration calorimetry (ITC) data. Electronic absorption spectra of Co(II)-loaded H178A EcMetAP-I indicate that the active site divalent metal ion is pentacoordinate, identical to the WT enzyme. These data indicate that the metal binding site has not been affected by altering H178. The effect of altering H178 on activity is, in general, due to a decrease in k(cat). The k(cat) value for Co(II)-loaded H178A decreased 70-fold toward MGMM and 290-fold toward MP-p-NA compared to the WT enzyme, while k(cat) decreased 50-fold toward MGMM for the Fe(II)-loaded H178A enzyme and 140-fold toward MP-p-NA. The K(m) values for MGMM remained unaffected, while those for MP-p-NA increased approximately 2-fold for Co(II)- and Fe(II)-loaded H178A. The k(cat)/K(m) values for both Co(II)- and Fe(II)-loaded H178A toward both substrates ranged from approximately 50- to 580-fold reduction. The pH dependence of log K(m), log k(cat), and log(k(cat)/K(m)) of both WT and H178A EcMetAP-I were also obtained and are identical, within error, for H178A and WT EcMetAP-I. Therefore, H178A is catalytically important but is not required for catalysis. Assignment of one of the observed pK(a) values at 8.1 for WT EcMetAP-I was obtained from plots of molar absorptivity at lambda(max(640)) vs pH for both WT and H178A EcMetAP-I. Apparent pK(a) values of 8.1 and 7.6 were obtained for WT and H178A EcMetAP-I, respectively, and were assigned to the deprotonation of a metal-bound water molecule. The data reported herein provide support for the key elements of the previously proposed mechanism and suggest that a similar mechanism can apply to the enzyme with a single metal in the active site.

Amino Acid Substitution↗
PubMed2003

Bifunctional abietadiene synthase: mutual structural dependence of the active sites for protonation-initiated and ionization-initiated cyclizations.

Abietadiene synthase from grand fir catalyzes two sequential, mechanistically distinct cyclizations, of geranylgeranyl diphosphate and of copalyl diphosphate, in the formation of a mixture of abietadiene isomers as the committed step of diterpenoid resin acid biosynthesis. Each reaction is independently conducted at a separate active site residing in what were considered to be structurally distinct domains typical of terpene cyclases. Despite the presence of an unusual 250-residue N-terminal insertional element, a tandem pair of charged residues distal to the insertion was shown to form a functional part of the C-terminal active site. Because abietadiene synthase resembles the ancestral plant terpene cyclase, this observation suggests an early evolutionary origin of catalytically important positively charged residues at the N-terminus of enzymes of this general class. A series of N- and C-terminal truncations of this enzyme were constructed and characterized, both alone and as mixtures of adjacent polypeptide pairs, to assess the proposed domain architecture, the function of the insertional element, and the role of presumptive interdomain contacts. These studies indicated a requirement for the insertional element in functional folding and allowed definition of the minimum primary structure of N- and C-terminal active site peptides. Most importantly, the results showed that, although the two active sites of abietadiene synthase are catalytically independent, substantial contact between the two regions is essential for the functional competence of this enzyme. Thus, the two cyclization sites of abietadiene synthase cannot be dissected into catalytically distinct domains, and, therefore, abietadiene synthase is unlikely to have arisen by fusion of two previously independent genes.

Abies↗
PubMed2003

Crystallization of beta-galactosidase does not reduce the range of activity of individual molecules.

By use of a capillary electrophoresis-based procedure, it is possible to measure the activity of individual molecules of beta-galactosidase. Molecules from the crystallized enzyme as well as the original enzyme preparation used to grow the crystals both displayed a range of activity of 20-fold or greater. beta-Galactosidase molecules obtained from two different crystals had indistinguishable activity distributions of 31,600 +/- 1100 and 31,800 +/- 1100 reactions min(-1) (enzyme molecule)(-1). This activity was found to be significantly different from that of the enzyme used to grow the crystals, which showed an activity distribution of 38,500 +/- 900 reactions min(-1) (enzyme molecule)(-1).

Crystallization↗
PubMed2003

Multiple methionine substitutions are tolerated in T4 lysozyme and have coupled effects on folding and stability.

In order to further explore the tolerance of proteins to amino acid substitutions within the interior, a series of core residues was replaced by methionine within the C-terminal domain of T4 lysozyme. By replacing leucine, isoleucine, valine and phenylalanine residues a total of 10 methionines could be introduced, which corresponds to a third of the residues that are buried in this domain. As more methionines are incorporated the protein gradually loses stability. This is attributed in part to a reduction in hydrophobic stabilization, in part to the increased entropic cost of localizing the long, flexible methionine sidechains, and in part to steric clashes. The changes in structure of the mutants relative to the wildtype protein are modest but tend to increase in an additive fashion as more methionines are included. In the most extreme case, namely the 10-methionine mutant, much of the C-terminal domain remains quite similar to wildtype (root-mean-square backbone shifts of 0.56 A), while the F and G helices undergo rotations of approximately 20 degrees and center-of-mass shifts of approximately 1.4 A. For up to six methionine substitutions the changes in stability are additive. Beyond this point, however, the multiple mutants are somewhat more stable than suggested from the sum of their constituents, especially for those including the replacement Val111-->Met. This is interpreted in terms of the larger structural changes associated with this substitution. The substituted sidechains in the mutant structures have somewhat higher crystallographic thermal factors than their counterparts in WT*. Nevertheless, the interiors of the mutant proteins retain a well-defined structure with little suggestion of molten-globule characteristics. Lysozymes in which selenomethionine has been incorporated rather than methionine tend to have increased stability. At the same time they also fold faster. This provides further evidence that, at the rate-limiting step in folding, the structure of the C-terminal domain of T4 lysozyme is similar to that of the fully folded protein.

Amino Acid Substitution↗
PubMed2002

A helix initiation signal in T4 lysozyme identified by polyalanine mutagenesis.

To better understand the relation between sequence and structure, and in an attempt to simplify the protein folding problem, a series of alanine substitutions was introduced into bacteriophage T4 lysozyme. In contrast to previous studies in this system, which were restricted to single alpha-helices, the present analysis included a helix-turn-helix region, a loop-helix region, and two alpha-helices that were well separated in the three-dimensional structure. It was shown previously that T4 lysozyme is very tolerant of alanine substitutions within alpha-helices, especially at solvent-exposed sites. The present study shows that the protein is also tolerant of such substitutions in turn and loop regions, although less than in helices. The results confirm that the structural information in the amino acid sequence is highly redundant. For example, the protein with the sequence 127AAAAAALAAAAWAAA141 folds normally, has melting temperature only 0.8 degrees C lower than wildtype, and has a crystal structure that is also very similar to wildtype. Polyalanine substitutions within turns or loops can, however, lead to differences in structure and in folding. In one example the triple substitution K35A/S36A/P37A caused this region of the molecule to change to a more helical conformation. In a second case the mutant with the sequence 34AAAAALAAAKAALAAA49, which spans a loop-helix region, had a dramatically altered thermal unfolding transition, suggesting that this region may tend to form a single, uninterrupted, helix. Substitution of Ala38 in the above construct with aspartic acid caused the unfolding to be more like wildtype, suggesting that residue 38, which is at a helix-capping position in the wildtype structure, provides an initiation signal that is essential in the polyalanine mutant for the correct formation of alpha-helix 39-50. In a typical protein, the information that codes for the 3D structure is presumably distributed over many amino acids. The present results suggest that in simplified sequences the key folding information may be restricted to a subset of critical residues, and so be more readily accessible to experimental analysis.

Amino Acid Sequence↗
PubMed2002

A model binding site for testing scoring functions in molecular docking.

Prediction of interaction energies between ligands and their receptors remains a major challenge for structure-based inhibitor discovery. Much effort has been devoted to developing scoring schemes that can successfully rank the affinities of a diverse set of possible ligands to a binding site for which the structure is known. To test these scoring functions, well-characterized experimental systems can be very useful. Here, mutation-created binding sites in T4 lysozyme were used to investigate how the quality of atomic charges and solvation energies affects molecular docking. Atomic charges and solvation energies were calculated for 172,118 molecules in the Available Chemicals Directory using a semi-empirical quantum mechanical approach by the program AMSOL. The database was first screened against the apolar cavity site created by the mutation Leu99Ala (L99A). Compared to the electronegativity-based charges that are widely used, the new charges and desolvation energies improved ranking of known apolar ligands, and better distinguished them from more polar isosteres that are not observed to bind. To investigate whether the new charges had predictive value, the non-polar residue Met102, which forms part of the binding site, was changed to the polar residue glutamine. The structure of the resulting Leu99Ala and Met102Gln double mutant of T4 lysozyme (L99A/M102Q) was determined and the docking calculation was repeated for the new site. Seven representative polar molecules that preferentially docked to the polar versus the apolar binding site were tested experimentally. All seven bind to the polar cavity (L99A/M102Q) but do not detectably bind to the apolar cavity (L99A). Five ligand-bound structures of L99A/M102Q were determined by X-ray crystallography. Docking predictions corresponded to the crystallographic results to within 0.4A RMSD. Improved treatment of partial atomic charges and desolvation energies in database docking appears feasible and leads to better distinction of true ligands. Simple model binding sites, such as L99A and its more polar variants, may find broad use in the development and testing of docking algorithms.

Algorithms↗
PubMed2002

Thermolysin in the absence of substrate has an open conformation.

The bacterial neutral proteases have been proposed to undergo hinge-bending during their catalytic cycle. However, in thermolysin, the prototypical member of the family, no significant conformational change has been observed. The structure of thermolysin has now been determined in a new crystal form that for the first time shows the enzyme in the absence of a ligand bound in the active site. This is shown to be an 'open' form of the enzyme. The relative orientation of the two domains that define the active-site cleft differ by a 5 degrees rotation relative to their positions in the previously studied ligand-bound 'closed' form. Based on structural comparisons, kinetic studies on mutants and molecular-dynamics simulations, Gly78 and Gly135-Gly136 have previously been suggested as two possible hinge regions. Comparison of the 'open' and 'closed' structures suggests that neither of the proposed hinge regions completely accounts for the observed displacement. The concerted movement of a group of side chains suggested to be associated with the hinge-bending motion is, however, confirmed.

Binding Sites↗
PubMed2002

Crystal structures of a T4-lysozyme duplication-extension mutant demonstrate that the highly conserved beta-sheet region has low intrinsic folding propensity.

Residues 24 to 35 of T4 lysozyme correspond to the second and third strands of a region of beta-sheet that is highly conserved in all known lysozyme and chitinase structures. To evaluate the intrinsic propensity of these amino acid residues to form a defined structure they were added at the C terminus of the native protein, together with a dipeptide linker. Two crystal structures of this active, mutant protein were obtained, to 1.9A and 2.3A resolution, respectively. Even though the crystal conditions are similar, the appended sequence adopts very different secondary structures. In one case it is weakly structured and appears to extend through the active-site cleft, perhaps in part adding an extra strand to the original beta-sheet. In the other crystal form the extension is largely alpha-helical. The formation of these alternative structures shows that the sequence does not have a strong intrinsic propensity to form a unique fold (either beta-sheet or otherwise). The results also suggest that structural conservation during evolution does not necessarily depend on sequence conservation or the conservation of folding propensity.

Amino Acid Sequence↗
PubMed2002

Structure of the DNA binding region of prospero reveals a novel homeo-prospero domain.

The Prospero transcription factor promotes neural differentiation in Drosophila, and its activity is tightly regulated by modulating its subcellular localization. Prospero is exported from the nucleus of neural precursors but imported into the nucleus of daughter cells, which is necessary for their proper differentiation. Prospero has a highly divergent putative homeodomain adjacent to a conserved Prospero domain; both are required for sequence-specific DNA binding. Here we show that the structure of these two regions consists of a single structural unit (a homeo-prospero domain), in which the Prospero domain region is in position to contribute to DNA binding and also to mask a defined nuclear export signal that is within the putative homeodomain region. We propose that the homeo-prospero domain coordinately regulates Prospero nuclear localization and DNA binding specificity.

Amino Acid Sequence↗
PubMed2002

Crystal structure of E. coli YhbY: a representative of a novel class of RNA binding proteins.

E. coli YhbY belongs to a conserved family of hypothetical proteins represented in eubacteria, archaea, and plants (Pfam code UPF0044). Three maize proteins harboring UPF0044-like domains are required for chloroplast group II intron splicing, and bioinformatic data suggest a role for prokaryotic UPF0044 members in translation. The crystal structure of YhbY has been determined. YhbY has a fold similar to that of the C-terminal domain of translation initiation factor 3 (IF3C), which binds to 16S rRNA in the 30S ribosome. Modeling studies indicate that the same surface is highly basic in all members of UPF0044, suggesting a conserved RNA binding surface. Taken together, the evidence suggests that members of UPF0044 constitute a previously unrecognized class of RNA binding domain.

Amino Acid Motifs↗
PubMed2002

The mirrored methionine sulfoxide reductases of Neisseria gonorrhoeae pilB.

Methionine sulfoxide reductases (Msr) protect against oxidative damage that can contribute to cell death. The tandem Msr domains (MsrA and MsrB) of the pilB protein from Neisseria gonorrhoeae each reduce different epimeric forms of methionine sulfoxide. The overall fold of the MsrB domain revealed by the 1.85 A crystal structure shows no resemblance to the previously determined MsrA structures from other organisms. Despite the lack of homology, the active sites show approximate mirror symmetry. In each case, conserved amino acid motifs mediate the stereo-specific recognition and reduction of the substrate. Unlike the MsrA domain, the MsrB domain activates the cysteine or selenocysteine nucleophile through a unique Cys-Arg-Asp/Glu catalytic triad. The collapse of the reaction intermediate most likely results in the formation of a sulfenic or selenenic acid moiety. Regeneration of the active site occurs through a series of thiol-disulfide exchange steps involving another active site Cys residue and thioredoxin. These observations have broad implications for modular catalysis, antibiotic drug design and continuing longevity studies in mammals.

Amino Acid Sequence↗
PubMed2002

A test of proposed rules for helix capping: implications for protein design.

alpha-helices within proteins are often terminated (capped) by distinctive configurations of the polypeptide chain. Two common arrangements are the Schellman motif and the alternative alpha(L) motif. Rose and coworkers developed stereochemical rules to identify the locations of such motifs in proteins of unknown structure based only on their amino acid sequences. To check the effectiveness of these rules, they made specific predictions regarding the structural and thermodynamic consequences of certain mutations in T4 lysozyme. We have constructed these mutants and show here that they have neither the structure nor the stability that was predicted. The results show the complexity of the protein-folding problem. Comparison of known protein structures may show that a characteristic sequence of amino acids (a sequence motif) corresponds to a conserved structural motif. In any particular protein, however, changes in other parts of the sequence may result in a different conformation. The structure is determined by sequence as a whole, not by parts considered in isolation.

Amino Acid Motifs↗
PubMed2001

Generation of noble-gas binding sites for crystallographic phasing using site-directed mutagenesis.

In recent years, the use of noble-gas complexes for the de novo phasing of protein structures has proven to be a useful alternative to selenomethionine and more traditional derivatives, largely owing to improvements in methods for incorporating noble gases within protein crystals. Advantages of noble-gas derivatives include a high degree of isomorphism when using xenon for multiple isomorphous replacement (MIR) and an easily accessible absorption edge when using krypton for multiwavelength anomalous dispersion (MAD) phasing. One problem with this approach is that not all proteins contain cavities which bind noble gases. Even in proteins which do bind noble gases, the resulting derivative may not be sufficient for phasing. Using T4 lysozyme as an example, it is illustrated how this limitation might be overcome by using 'large-to-small' mutations to introduce potential noble-gas binding sites. Wild-type T4 lysozyme contains a single xenon-binding site. By truncating leucine and phenylalanine residues to alanine, it is possible to generate additional noble-gas binding sites within the core of the protein. Combining rotating-anode data from xenon complexes of wild-type and mutant lysozymes yields MIR phases which compare favorably with those determined from a selenomethionine MAD experiment conducted at a synchrotron. Experience with T4 lysozyme suggests that a leucine-to-alanine substitution made at random in a protein of unknown structure has about a 30% chance of providing a useful derivative. This procedure holds promise for the determination of unknown protein structures, especially when selenomethionine-containing protein is not available or when access to a synchrotron is limited.

Bacteriophage T4↗