PubMed Health⌕ Search

Biomedical subjects

Buddy D Ratner

Publications and source records attributed to Buddy D Ratner.

At least 19 recordsLinked to original sources
PubMed2007

Comparison of native extracellular matrix with adsorbed protein films using secondary ion mass spectrometry.

In the past decade, the temperature-responsive behavior of poly(N-isopropyl acrylamide) (pNIPAM) has come to be recognized as a convenient method for the nondestructive harvest of confluent cell layers. Recently, we have utilized this nondestructive cell harvest method as a means to ascertain the nature of the extracellular matrix (ECM) secreted from cells. In this work, we compare the ECM obtained after cell liftoff to individual ECM proteins adsorbed directly onto RF-plasma-deposited pNIPAM (ppNIPAM). Using X-ray photoelectron spectroscopy, we find that the composition of ppNIPAM post-cell liftoff surfaces is consistent with those of the ppNIPAM post-protein adsorption surface, both of which differ from control surfaces. Using principal component analysis of positive-ion time-of-flight secondary ion mass spectrometry (ToF-SIMS) data, we show that the major ECM proteins examined can effectively be identified from their amino acid compositions. By comparing the positive-ion ToF-SIMS data from each of the ppNIPAM post-protein adsorption surfaces to that of ppNIPAM post-cell liftoff, we find that ppNIPAM post-cell liftoff surfaces are distinctly separate from fibronectin (FN). This result is consistent with our previous observation using immunoassay that FN is clearly associated with the cell sheet after low-temperature liftoff from ppNIPAM.

Acrylic Resins↗
PubMed2007

Controlling the orientation of bone osteopontin via its specific binding with collagen I to modulate osteoblast adhesion.

Osteopontin (OPN) is an important matricellular protein that modulates cell functions. It is potentially an excellent surface-coating component for engineered biomaterials. It is believed that in its preferred orientation and conformation on a surface, the functional domains of OPN such as the arginine-glycine-aspartic acid (RGD) motif will be presented to cells to the greatest extent. Previously, the authors demonstrated that OPN orientation could be modulated by surface charge. In this work, the authors attempt to control the orientation/conformation of bone OPN via its specific interactions with type I collagen. Surface plasmon resonance was used to confirm the specific binding between bone OPN and collagen I. A radiolabeled OPN adsorption assay was used to determine the amount of adsorbed OPN on tissue culture polystyrene (TCPS) surfaces with or without collagen I as an interlayer. An in vitro cell adhesion assay using osteoblast MC3T3-E1 was performed to compare the functionality of collagen-bound OPN and adsorbed OPN on TCPS. With the same amount of OPN on the surfaces, the number of cells adhered to collagen-bound OPN is significantly higher than to OPN alone on TCPS. A cell inhibition assay using soluble GRGDSP peptides showed that a higher GRGDSP concentration was needed to completely block osteoblast adhesion to collagen-bound OPN than to OPN directly on TCPS. Enhanced cell adhesion and higher blocking peptide concentration suggest that collagen-bound bone OPN has a preferable orientation/conformation for cell adhesion compared with OPN alone on TCPS. Thus, the specific binding of OPN to collagen I may naturally orient OPN, thus influencing osteoblast adhesion.

Animals↗
PubMed2007

Plasma deposition of tetraglyme inside small diameter tubing: optimization and characterization.

In this study, a glow discharge plasma deposition system previously used for treating flat substrates was successfully modified and optimized to produce a PEO-like coating on the inner surface of 1-3 mm ID polyethylene tubing by deposition of tetra ethylene glycol dimethyl ether (tetraglyme). The plasma treatment conditions were varied in order to find operating values that would produce coatings with the ultralow (< 5 ng/cm(2)) fibrinogen adsorption (Gamma(Fg)) previously shown necessary to significantly reduce platelet adhesion. The flow rate of gaseous tetraglyme monomer, pressure, and plasma generating power were found to be the most important parameters affecting the uniformity and chemical structure of the coating. The coating uniformity and quality were assessed by measuring Gamma(Fg) at positions 1 cm apart along the entire tube and the fraction of C1s carbon that was in an ether bond (ether-carbon ratio) by electron spectroscopy of chemical analysis. Under optimized conditions, tetraglyme plasma-coated tubes of up to 20 cm in length had ultralow Gamma(Fg). The region of the tube that had ultralow Gamma(Fg) also had C1s ether-carbon ratios that are greater than 50%.

Coated Materials, Biocompatible↗
PubMed2007

Enhanced in-vitro blood compatibility of 316L stainless steel surfaces by reactive landing of hyaluronan ions.

A novel dry process for immobilization of hyaluronan on stainless steel surfaces is presented. This process that we call reactive landing is based on an interaction of hyperthermal gas-phase hyaluronan ions with plasma-cleaned and activated stainless steel surfaces. Reactive landing is performed on a unique instrument that combines an in-situ plasma reactor with an electrospray ion source and ion transfer optics. Gas-phase hyaluronan anions are obtained by electrospray ionization of sodium hyaluronan solutions and immobilized by reactive landing on large-area stainless steel surfaces. The immobilized hyaluronan withstands extensive washing with polar solvents and solutions, and the washed surfaces maintain the protective properties against blood platelet activation. The mechanism of hyaluronan discharge and immobilization is discussed.

Biocompatible Materials↗
PubMed2007

The influence of surface energy on competitive protein adsorption on oxidized NiTi surfaces.

NiTi shape memory alloy surfaces, untreated, and oxidized by a new oxidation treatment (OT) in order to obtain a Ni-free surface, have been compared in terms of surface energy and protein adsorption behavior. The polar and dispersive components of the surface energy have been determined. A competitive adsorption process between fibronectin and albumin has been carried out by (125)I-radiolabeling. Moreover, the adhesion strength between both proteins and NiTi surfaces has been evaluated by performing an elution test. The results show that the OT treatment enhances the hydrophilic character of NiTi surfaces by significantly increasing the polar component of their surface energy. Moreover, the OT treatment increases the amount of fibronectin and albumin adsorbed. It also increases the fibronectin affinity for NiTi surfaces. The elution test results could suggest a conformational change of fibronectin as a function of chemical composition of NiTi material and of surface treatment. Finally, a linear correlation between the amount of adsorbed albumin and the polar component of the surface energy of NiTi surfaces has been demonstrated. This work indicates that the OT treatment has an influence on the surface energy value of NiTi materials, which in turn influences the protein adsorption process.

Adsorption↗
PubMed2006

Glow discharge plasma treatment of polyethylene tubing with tetraglyme results in ultralow fibrinogen adsorption and greatly reduced platelet adhesion.

Previous studies from our lab have shown that fibrinogen adsorption (Gamma(Fg)) must be reduced below 10 ng/cm(2) to significantly reduce platelet adhesion, and that radio frequency glow discharge (RFGD) treatment of polymeric films in the presence of tetraethylene glycol dimethyl ether (tetraglyme) can reduce Gamma(Fg) to the desired ultralow value. In this report, the effects of RFGD coatings of tetraglyme on the lumenal surface of PE tubing on Gamma(Fg) and on blood interactions both in vitro and ex vivo are described. Gamma(Fg) on the tetraglyme-coated PE tubing was reduced to the desired ultralow level (<10 ng/cm(2)), and we also observed a significant decrease in adsorption of von Willebrand's factor. In vitro platelet adhesion from washed platelet suspensions, platelet rich plasma, or whole blood to tetraglyme-coated PE tubing was decreased compared to PE, polyurethane, or silicone rubber tubes. In addition, thrombin generation by platelets adherent to tetraglyme-coated PE was also much less than by platelets adherent to PE. When inserted in an ex vivo carotid artery-carotid artery shunt in sheep, the RFGD tetraglyme-coated PE exhibited a very low number of adherent platelets compared to heparin-coated, chromic acid-etched, or plain PE. The RFGD tetraglyme-coated PE tubes exhibited high protein and platelet resistance in vitro, and high platelet resistance ex vivo. The improved hemocompatibility is attributed to the unique chemical structure of RFGD tetraglyme that makes it highly protein resistant.

Adsorption↗
PubMed2006

Fibrinogen adsorption, platelet adhesion and activation on mixed hydroxyl-/methyl-terminated self-assembled monolayers.

The effect of surface wettability on fibrinogen adsorption, platelet adhesion and platelet activation was investigated using self-assembled monolayers (SAMs) containing different ratios of longer chain methyl- and shorter chain hydroxyl-terminated alkanethiols (C15CH3 vs. C11OH) on gold. Protein adsorption studies were performed using radiolabeled human fibrinogen (HFG). Platelet adhesion and activation studies with and without pre-adsorbed fibrinogen, albumin and plasma were assessed using scanning electron microscopy (SEM) and a glutaraldehyde-induced fluorescence technique (GIFT). Results demonstrated a linear decrease of HFG adsorption with the increase of OH groups on the monolayer (increase of the hydrophilicity). Platelet adhesion and activation also decrease with increase of hydrophilicity of surface. Concerning SAMs pre-immersed in proteins, fibrinogen adsorption was related with high platelet adhesion and activation. The passivant effect of albumin on platelet adhesion and activation was only demonstrated on SAMs contained C11OH. When all the blood proteins are present (plasma) platelet adhesion was almost absent on SAMs with 65% and 100% C11OH. This could be explained by the higher albumin affinity of the SAMs with 65% C11OH and the lower total protein adsorption associated with SAMs with 100% C11OH.

Adsorption↗
PubMed2006

Modulating cell adhesion and spreading by control of FnIII7-10 orientation on charged self-assembled monolayers (SAMs) of alkanethiolates.

In this work, we demonstrate that surface charge can be used to modulate cell adhesion/spreading through the control of the orientation of adsorbed FnIII(7-10), which is a cell-adhesive protein containing RGD residues. Carboxylic acid (COOH) and amine (NH(2))-terminated self-assembled monolayers (SAMs) of alkanethiolates were used as model negatively and positively charged surfaces, respectively. The adsorbed amount of FnIII(7-10) is controlled to be equivalent on both SAMs as confirmed by the adsorption isotherms determined using I(125)-radiolabeled FnIII(7-10.) The binding of a monoclonal antibody specific for the cell-binding domain of FnIII(7-10) was measured by surface plasmon resonance (SPR) to evaluate FnIII(7-10) orientations on different SAMs. Results indicate that adsorbed FnIII(7-10) on NH(2)-SAM has an orientation with more cell-binding domains accessible than on COOH-SAM, confirming our predictions from Monte Carlo simulations. Both phase contrast images and Vybrant MTT cell proliferation assays show that the adhesion/spreading of bovine aortic endothelial cells (BAECs) on the NH(2)-SAM is significantly better than that on the COOH-SAM coated with an equivalent amount of FnIII(7-10). These results indicate that surface charge can be used to specifically orient cell adhesive proteins such as FnIII(7-10), thus providing a promising strategy to increase the activity of materials incorporating biological moieties.

Alkanesulfonates↗
PubMed2006

Protein bonding on biodegradable poly(L-lactide-co-caprolactone) membrane for esophageal tissue engineering.

A biodegradable and flexible poly(L-lactide-co-caprolactone) (PLLC) copolymer was synthesized and surface modification has been performed aiming at application as a scaffold in esophageal tissue engineering. The PLLC membrane surface was aminolyzed by 1,6-hexanediamine to introduce free amino groups. Using these amino groups as bridges, fibronectin and collagen were subsequently bonded with glutaraldehyde as a coupling agent. The presence of free amino groups on the aminolyzed PLLC surface was quantified using fluorescamine analysis method, which revealed that the surface NH2 density increased and eventually saturated with increasing 1,6-hexanediamine concentration or reaction time. X-ray photoelectron spectroscopy (XPS) confirmed the presence of both proteins separately on the modified PLLC surface. Water contact angle measurements evaluate the wettability of modified and unmodified PLLC surfaces. Protein-bonded surface presented more hydrophilic and homogeneous, yet PLLC can also adsorb some protein molecules. In vitro long-term (12d) culture of porcine esophageal cells proved that fibronectin- and collagen-modified PLLC surface (denoted PLLC-Fn and PLLC-Col, respectively) can more effectively support the growth of smooth muscle cells and epithelial cells; both modified and unmodified PLLC support fibroblasts growth. Mitochondrial activity assay and cell morphology observation indicate that the PLLC-Fn surface is more favorable to epithelium regeneration than PLLC-Col. These culture results provide much valuable information for our subsequent research on the construction of artificial scaffolds with esophageal function. Fibronectin-integrated PLLC will be a good candidate scaffold to support the growth of all types of esophageal cells.

Acetamides↗
PubMed2006

Development of an esophagus acellular matrix tissue scaffold.

A cell-extraction protocol yielding an esophagus acellular matrix (EAM) scaffold for use in tissue engineering of an esophagus, including hypotonic lysis, multiple detergent cell extraction steps, and nucleic acid digestion, was developed in a rat model. Histological techniques, burst pressure studies, in vitro esophageal epithelial cell seeding, and in vivo implantation were used to assess cell extraction, extracellular matrix (ECM) preservation, and biocompatibility. Microscopy demonstrated that cell extraction protocols using sodium dodecyl sulfate (SDS) (0.5%, wt/vol) as a detergent resulted in cell-free EAM with retained ECM protein collagen, elastin, laminin, and fibronectin. Burst pressure studies indicated a loss of tensile strength in EAMs, but at intraluminal pressures that were unlikely to affect in vivo application. In vitro cell seeding studies exhibited epithelial cell proliferation with stratification similar to native esophagi after 11 days, and subcutaneously implanted EAMs displayed neovascularization and a minimal inflammatory response after 30 days of implantation. This study presents an esophagus acellular matrix tissue scaffold with preserved ECM proteins, biomechanical properties, and the ability to support esophageal cell proliferation to serve as the foundation for a tissue-engineered esophagus.

Animals↗
PubMed2005

Secreted protein acidic and rich in cysteine (SPARC/osteonectin/BM-40) binds to fibrinogen fragments D and E, but not to native fibrinogen.

Secreted protein acidic and rich in cysteine (SPARC/osteonectin/BM-40) is a matricellular protein that functions in wound healing. Fibrinogen is a plasma protein involved in many aspects of wound healing, such as inflammation, fibrosis and thrombosis. In this study, the binding of SPARC to both native and plasmin-cleaved fibrinogen under physiological conditions was examined by the use of a surface plasmon resonance (SPR) biosensor. We show that SPARC binds to plasmin-cleaved fibrinogen, but not to native fibrinogen. SPARC binds to both fibrinogen fragments D and E fg D and fg E with similar dissociation constants (8.67 x 10(-8) M for Fg D and 1.61 x 10(-7) M for Fg E). Results from endothelial cell proliferation assays show that the binding of SPARC to Fg E suppressed the inhibition of proliferation by SPARC, whereas the binding of SPARC to Fg D did not influence the activity of SPARC on the cell cycle. The interaction of SPARC with fibrinogen fragments D and E, which are produced as a result of proteolytic activation of fibrinolysis, reveals potential storage sites in provisional extracellular matrix for SPARC during the wound healing process and indicates a regulatory role of SPARC in fibrinolysis and angiogenesis.

Animals↗
PubMed2005

Identifying the SPARC binding sites on collagen I and procollagen I by atomic force microscopy.

SPARC (secreted protein acidic and rich in cysteine) is a matricellular protein associated with the extracellular matrix (ECM). It has been found that the production of collagen I is a requisite for the association of SPARC with ECM, and studies with SPARC-null mice indicate that SPARC plays a role in modifying the structure of collagen fibers. It is not known, however, whether SPARC interacts with the collagen I precursor, procollagen I. In this study, the binding of SPARC to collagen I and procollagen I was verified by surface plasmon resonance. The SPARC-binding sites on collagen I and procollagen I were identified by directly visualizing their complexes using tapping-mode atomic force microscopy (TM-AFM). The characteristic chain end feature in collagen I is not readily detected by AFM, so unambiguous location of the binding sites relative to the C- or N-termini is difficult. In contrast, procollagen I, with its large globular C-propeptide, permits easy identification of the C-terminus. Histograms were constructed and compared based on the distances of the bound SPARC to the C-terminus of procollagen I and to the closest end of collagen I. There is a broad distribution of SPARC binding sites on procollagen I with the most preferred binding region located approximately 1/3 from the C-terminus. Characterization of the SPARC-binding sites on collagen I and procollagen I provides useful information for further understanding of the functional implications of their interactions.

Animals↗
PubMed2005

Cell sheet detachment affects the extracellular matrix: a surface science study comparing thermal liftoff, enzymatic, and mechanical methods.

This work compares the removal of bovine aortic endothelial cell (BAEC) monolayers via 1) low-temperature liftoff from a "smart polymer," plasma polymerized poly(N-isopropyl acrylamide) (ppNIPAM), 2) enzymatic digestion, and 3) mechanical dissociation from ppNIPAM surfaces. We examine the surfaces after cell removal by using X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), immunostaining, and cell adhesion assay. Immunoassay results indicate that low-temperature liftoff nondestructively harvests the cell sheet and most of the underlying extracellular matrix (ECM), whereas enzymatic digestion and mechanical dissociation are damaging to both the cells and ECM. XPS results indicate that amide and alcohol groups attributed to proteins in the ECM are present on postliftoff surfaces. Principal component analysis (PCA) of ToF-SIMS data indicates that molecular ion fragments of amino acids are present on postliftoff surfaces. Finally, a cell adhesion assay seeding new cells on surfaces from which an initial layer of cells was removed via each of the three methods indicates that liftoff and mechanical dissociation leave behind surfaces that better promote cell adhesion. We conclude that the removal of BAEC cells via low-temperature liftoff from ppNIPAM-treated surfaces is less damaging to the ECM proteins remaining at the surface than the other methods.

Acrylamides↗
PubMed2005

The role of adsorbed fibrinogen in platelet adhesion to polyurethane surfaces: a comparison of surface hydrophobicity, protein adsorption, monoclonal antibody binding, and platelet adhesion.

Ten specially synthesized polyurethanes (PUs) were used to investigate the effects of surface properties on platelet adhesion. Surface composition and hydrophilicity, fibrinogen (Fg) and von Willebrand's factor (vWf) adsorption, monoclonal anti-Fg binding, and platelet adhesion were measured. PUs preadsorbed with afibrinogenemic plasma or serum exhibited very low platelet adhesion, while adhesion after preadsorption with vWf deficient plasma was not reduced, showing that Fg is the key plasma protein mediating platelet adhesion under static conditions. Platelet adhesion to the ten PUs after plasma preadsorption varied greatly, but was only partially consistent with Fg adsorption. Thus, while very hydrophilic PU copolymers containing PEG that had ultralow Fg adsorption also had very low platelet adhesion, some of the more hydrophobic PUs had relatively high Fg adsorption but still exhibited lower platelet adhesion. To examine why some PUs with high Fg adsorption had lower platelet adhesion, three monoclonal antibodies (mAbs) that bind to sites in Fg thought to mediate platelet adhesion were used. The antibodies were: M1, specific to gamma-chain C-terminal; and R1 and R2, specific to RGD containing regions in the alpha-chain N- and C-terminal, respectively. Platelet adhesion was well correlated with M1 binding, but not with R1 or R2 binding. When these mAbs were incubated with plasma preadsorbed surfaces, they blocked adhesion to variable degrees. The ability of the R1 and R2 mAbs to partially block adhesion to adsorbed Fg suggests that RGD sites in the alpha chain may also be involved in mediating platelet adhesion and act synergistically with the C-terminal of the gamma-chain.

Adsorption↗
PubMed2005

A model for studying epithelial attachment and morphology at the interface between skin and percutaneous devices.

Percutaneous devices are indispensable in modern medicine, yet complications from their use result in significant morbidity, mortality, and cost. Bacterial biofilm at the device exit site accounts for most infections in short-term devices. We hypothesize that advanced biomaterials can be developed that facilitate attachment of skin cells to percutaneous devices, forming a seal to preclude bacterial invasion. To study the skin/biomaterial interface systematically, we first identified biomaterials with physical properties compatible with histological processing of skin. Second, we developed an organ culture system to study skin response to implants. Organ cultures implanted with porous poly(2-hydroxyethyl methacrylate) [poly(HEMA)] or polytetrafluoroethylene (PTFE) could easily be evaluated histologically with preservation of the skin/biomaterial interface. Epithelial cells migrated down the cut edges of the biomaterial in a pattern seen in marsupialization of percutaneous devices in vivo. This in vitro model maintains skin viability and allows histologic evaluation of the skin/biomaterial interface, making this a useful, inexpensive test-bed for studies of epidermal attachment to modified biomaterials.

Administration, Cutaneous↗
PubMed2005

Surface chemical and mechanical properties of plasma-polymerized N-isopropylacrylamide.

Surface-immobilized poly(N-isopropyl acrylamide) (pNIPAM) is currently used for a wide variety of biosensor and biomaterial applications. A thorough characterization of the surface properties of pNIPAM thin films will benefit those applications. In this work, we present analysis of a plasma-polymerized NIPAM (ppNIPAM) coating by multiple surface analytical techniques, including time-of-flight secondary-ion mass spectrometry (ToF-SIMS), contact angle measurement, atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy. ToF-SIMS data show that the plasma-deposited NIPAM polymer on the substrate is cross-linked with a good retention of the monomer integrity. Contact angle results confirm the thermoresponsive nature of the film as observed by a change of surface wettability as a function of temperature. Topographic and force-distance curve measurements by AFM further demonstrate that the grafted film shrinks or swells depending on the temperature of the aqueous environment. A clear transition of the elastic modulus is observed at 31-32 degrees C. The change of the surface wettability and mechanical properties vs temperature are attributed to different conformations taken by the polymer, which is reflected on the outmost surface as distinct side chain groups orienting outward at different temperatures as measured by SFG. The results suggest that a ppNIPAM thin film on a substrate experiences similar mechanical and chemical changes to pNIPAM bulk polymers in solution. The SFG result provides evidence supporting the current theory of the lower critical solution temperature (LCST) behavior of pNIPAM.

Acrylic Resins↗
PubMed2005

Preparative soft and reactive landing of gas-phase ions on plasma-treated metal surfaces.

Soft landing of singly charged gas-phase ions on dry metal surfaces that were pretreated in situ by oxygen plasma results in 0.1-2% total yields of recovered intact compounds. Lysine, peptides, crystal violet dye, and a biotin conjugate are found to survive soft landing of hyperthermal ions of up to 50-eV kinetic energy. Soft landing at 40-50-eV ion kinetic energies of a fluorescence-labeled biotin conjugate results in an immobilized fraction that cannot be washed from the surface and is found to contain an intact biotin moiety. The present results represent an approximately 10(4) fold improvement in soft-landing efficiency and indicate that plasma-treated metal surfaces can be useful for preparative separation of organic and biological molecules by mass spectrometry. The substantial improvement in soft-landing yields results from a high transmission of electrosprayed ions into the vacuum system, efficient and nondestructive discharge of ions on the metal oxide surface, and facile analyte recovery in the absence of a matrix.

Biotin↗