PubMed Health⌕ Search

Biomedical subjects

Buxing Han

Publications and source records attributed to Buxing Han.

At least 37 records · Page 2Linked to original sources
PubMed2005

Phase separation of the reaction system induced by CO2 and conversion enhancement for the esterification of acetic acid with ethanol in ionic liquid.

The effect of CO2 on the phase behavior of the reaction system and equilibrium conversion for esterification of acetic acid and ethanol in ionic liquid (1-butyl-3-methylimidazolium hydrogen sulfate, [bmim][HSO4]) was studied at 60.0 degrees C up to 15 MPa. It was demonstrated that there was only one phase in the reaction system in the absence of CO2. The reaction system underwent two-phase-->three-phase-->two-phase transitions with increasing pressure. The pressure of CO2 or the phase behavior of the system affected the equilibrium conversion of the reaction markedly. As the pressure was less than 3.5 MPa, there were two phases in the system, and the equilibrium conversion increased as pressure was increased. In the pressure range of 3.5-9.5 MPa, there existed three phases, and the equilibrium conversion increased more rapidly with increasing pressure. As the pressure was higher than 9.5 MPa, the reaction system entered another two-phase region and the equilibrium conversion was nearly independent of pressure. The total equilibrium conversion was 64% without CO2 and could be as high as 80% as pressure was higher than 9.0 MPa. The apparent equilibrium constants (K(x)) in different phases were also determined, showing that the K(x) in the middle phase or top phase was much greater than that in the bottom phase.

Journal Article↗
PubMed2005

Synthesis of single-crystal gold nanosheets of large size in ionic liquids.

Large-size single-crystal gold nanosheets have been successfully prepared by microwave heating of HAuCl(4) in ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate, without any additional template agent. Transmission electron microscopy (TEM), electron diffraction (ED), scanning electron microscopy (SEM), and X-ray powder diffraction (XRD) were used to characterize the resultant gold nanosheets. It was demonstrated that the ionic liquid could act as template agent for the formation of gold nanosheets. The present synthesis route is very simple and fast. It can be expected that the method can be extended to the fabrication of other metal nanosheets in ionic liquids.

Journal Article↗
PubMed2005

Facile route to synthesize multiwalled carbon nanotube/zinc sulfide heterostructures: optical and electrical properties.

A simple method to decorate the multiwalled carbon nanotubes (MWCNTs) with ZnS nanospheres has been developed. The method involves ultrasonic pretreatment and heat treatments of MWCNTs, zinc chloride, and thiourea in ethanol. The heterostructures have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Comparative experiments show that both ultrasonic treatment and heat treatment are necessary for synthesizing the MWCNTs/ZnS heterostructures. Moreover, a photoluminescence spectrum shows that the MWCNTs/ZnS heterostructures feature a broad blue emission at about 430 nm, indicating that there exists significant ground-state interaction between ZnS nanospheres and MWCNTs. Meanwhile, the current-voltage characteristic of the MWCNTs/ZnS exhibits clear rectifying behavior, revealing charge transfer between MWCNTs and ZnS nanospheres.

Journal Article↗
PubMed2005

Compressed-CO2-assisted patterning of polymers.

We report a facile route to pattern polymer surfaces with the aid of compressed CO(2), termed the compressed-CO(2)-assisted imprint method. In this method, compressed CO(2) serves as a plasticizer for polymers (such as poly(methyl methylate) and polystyrene), which leads to a tremendous reduction in the glass transition temperature and viscosity of the polymers. Nylon fabrics and anode aluminum oxide porous membranes are used as molds, respectively, to pattern the softened polymers at relatively low temperatures, resulting in patterns at the scale of micrometers and nanometers on the surface of polymer films. The patterned structures can be tuned by changing CO(2) pressure and temperature in the imprinting process. This method is simple and environmentally benign. It also can be operated at low temperatures, for instance, ambient temperature.

Journal Article↗
PubMed2005

TX-100/water/1-butyl-3-methylimidazolium hexafluorophosphate microemulsions.

Both ionic liquids and water are typical green solvents. In this work, the phase behavior of the ternary system consisting of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), TX-100, and water was determined at 25.0 degrees C. The water-in-bmimPF6, bicontinuous, and bmimPF6-in-water microregions of the microemulsions were identified by cyclic voltammetry method using potassium ferrocyanide K4Fe(CN)6 as the electroactive probe. Dynamic light scattering (DLS) and the UV-vis method were used to characterize the microemulsions. It was demonstrated that the hydrodynamic diameter (Dh) of the bmimPF6-in-water microemulsions is nearly independent of the water content but increases with increasing bmimPF6 content due to the swelling of the micelles by the ionic liquid. The UV-vis further confirmed the existence of water domains in the water-in-bmimPF6 microemulsions, and the salt potassium ferricyanide K3Fe(CN)6 could be dissolved in the water domains.

Journal Article↗
PubMed2005

Replication of biological organizations through a supercritical fluid route.

A novel and simple method to replicate biological organizations (cotton and pollen grains) with high precision was proposed, in which the precursor dissolved in supercritical CO2 reacted with the surface active groups and adsorbed surface water on biological templates, followed by in situ SCF extraction of the byproducts and unreacted precursor, resulting in inorganic replicas faithfully copying both the macro- and microstructures of the biotemplates.

Carbon Dioxide↗
PubMed2005

Hexagonal liquid crystalline phases formed in ternary systems of Brij 97-water-ionic liquids.

Phase diagrams of two ionic liquids: hydrophobic 1-butyl-3-methylimidazolium hexafluorophosphate (bmim-PF(6)) and relatively hydrophilic 1-butyl-3-methylimidazolium tetrafluoroborate (bmim-BF(4)) in aqueous solutions of Brij 97 were determined at 25 degrees C. Two hexagonal liquid crystalline phases formed in bmim-PF(6)- and bmim-BF(4)-containing ternary systems were investigated by means of small-angle X-ray scattering (SAXS) and rheological techniques, with comparison of composition and temperature effects. From analysis of the SAXS data, bmim-PF(6) is dominantly penetrated between the oxyethylene chains of surfactant molecules, whereas bmim-BF(4) is mainly located in the water layer of hexagonal phases. The strength of the network of hexagonal phase formed in the Brij 97/water/bmim-BF(4) system is appreciably stronger than that of the Brij 97/water/bmim-PF(6) system, indicated by the smaller area of the surfactant molecule at the interface and the higher moduli (G', G' '). Temperature has a converse effect on the lattice parameters of the two hexagonal phases.

Journal Article↗
PubMed2005

Solvatochromic behavior of phenol blue in CO2+ethanol and CO2+n-pentane mixtures in the critical region and local composition enhancement.

The UV-Vis spectra of probe phenol blue in CO(2)+ethanol and CO(2)+n-pentane binary mixtures were studied at 308.15 K and different pressures. The experiments were conducted in both supercritical region and subcritical region of the mixtures by changing the compositions of the mixed solvents. On the basis of the experimental results the local compositions of the solvents about phenol blue were estimated by neglecting the size difference of CO(2) and the cosolvents. Then the local composition data were corrected by a method proposed in this work, which is mainly based on Lennard-Jones sphere model. It was demonstrated that the local mole fraction of the cosolvents is higher than that in the bulk solution at all the experimental conditions. In the near critical region of the mixed solvents the local composition enhancement, defined as the ratio of cosolvent mole fraction about the solute to that in the bulk solution, increased significantly as pressure approached the phase boundary from high pressure. The local composition enhancement was not considerable as pressure was much higher than the critical pressure. In addition, in subcritical region the degree of composition enhancement was much smaller and was not sensitive to pressure in the entire pressure range as the concentration of the cosolvents in the mixed solvents was much higher than the concentration at the critical point of the mixtures.

Journal Article↗
PubMed2005

Compressed CO2 in AOT reverse micellar solution: effect on stability, percolation, and size.

The effects of compressed CO(2) in sodium bis-2-ethylhexylsulfosuccinate (AOT)/decane reversed micellar solution on the stability of the micelles, interface, and micelle/micelle interactions were studied. It was demonstrated that the compressed gas could increase the solubilization of water in this system. The formation of the stabilized one-phase microemulsion was confirmed by conductivity measurements. A shift in percolation threshold to higher temperature was observed after compressed gas was added. The gyration radius (R(g)) of the reverse micelles was determined using SAXS. R(g) increases with the addition of water, while it decreases appreciably with increasing pressure of compressed gas at fixed W(0). These results were interpreted in terms of an increase of the rigidity of the interface layer and a decrease of the interdroplet attraction. The results of this work provide useful information to get insight into the mechanism of cosurfactants to stabilize reverse micelles.

Journal Article↗
PubMed2005

Fabrication of flowerlike polymer superstructures using polymer/zeolite composites prepared with supercritical CO2.

We report a route to the fabrication of unique flowerlike polymer superstructures with uniform petals at the nanoscale. In this method, polymer/zeolite composite is first prepared by loading corresponding monomer and initiator into the channels of the host zeolite with the aid of supercritical (SC) CO2, followed by thermal polymerization of monomers in the channels of the zeolite. The resultant polymer/zeolite composite is then treated with HF aqueous solution to allow the self-aggregation of the polymer and the inorganic components to form the polymeric layers and inorganic layers. Unique microscale flowerlike polymer superstructures are obtained after further treatment with HF aqueous solution. Different techniques, such as scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and thermogravimetry (TG), have been used to characterize the microflowers.

Journal Article↗
PubMed2005

Synthesis of Ag/BSA composite nanospheres from water-in-oil microemulsion using compressed CO2 as antisolvent.

In this work, a novel route to synthesize biomolecule/metal composite nanospheres is proposed. This method combines the advantages that the silver nanoparticles and bovine serum albumin (BSA) can be precipitated simultaneously from water-in-oil microemulsion by the easy control of CO2 pressure, which was revealed by our high-pressure UV-VIS spectra. The Ag/BSA nanocomposites were successfully prepared using this method. The transmission electronic microscopy (TEM) if the obtained nanocomposites shows that the small-sized Ag nanaoparticles are immobilized by the BSA nanospheres, and the phase structure was characterized by X-ray diffraction (XRD). The Ag/BSA nanocomposites show absorption properties at a wavelength around 435 nm.

Biocompatible Materials↗
PubMed2005

Enhanced stabilization of reverse micelles by compressed CO2.

The effect of compressed CO2 on the solubilization capacity of water in reverse micelles of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) in longer chain n-alkanes was studied at different temperatures and pressures. It was found that the amount of solubilized water is increased considerably by CO2 in a suitable pressure range. The suitable CO2 pressure range in which the solubilization capacity of water could be enhanced decreased with increasing W0 (water-to-AOT molar ratio). The microenvironments in the CO2-stabilized reverse micelles were investigated by UV/Vis adsorption spectroscopy with methyl orange (MO) as probe. The mechanism by which the reverse micelles are stabilized by CO2 is discussed in detail. The main reason is likely to be that CO2 has a much smaller molecular volume than the n-alkane solvents studied in this work. Therefore, it can penetrate the interfacial film of the reverse micelles and stabilize them by increasing the rigidity of the micellar interface and thus reducing the attractive interaction between the droplets. However, if the CO2 pressure is too high, the solvent strength of the solvents is reduced markedly, and this induces phase separation in the micellar solution.

Journal Article↗
PubMed2005

Facile synthesis of polyaniline nanofibers using chloroaurate acid as the oxidant.

This work demonstrated a facile route to the synthesis of polyaniline (PANI) nanofibers by polymerization of aniline using chloroaurate acid (HAuCl(4)) as the oxidant. The reduction of AuCl(4)(-) is accompanied by oxidative polymerization of aniline, leading to uniform PANI nanofibers with a diameter of 35 +/- 5 nm and aggregated gold nanoparticles which can precipitate from the liquid phase during the reaction. The resultant PANI nanofibers and gold particles were characterized by means of different techniques, such as UV-vis, FTIR spectroscopy, and scanning and transmission electron microscopy methods. It is found that the gold aggregates are capped with polyaniline, and the conductivity of the fibers is around 0.16 S/cm.

Journal Article↗
PubMed2005

Adhesion and proliferation of OCT-1 osteoblast-like cells on micro- and nano-scale topography structured poly(L-lactide).

The impact of the surface topography of polylactone-type polymer on cell adhesion was to be concerned because the micro-scale texture of a surface can provide a significant effect on the adhesion behavior of cells on the surface. Especially for the application of tissue engineering scaffold, the pore size could have an influence on cell in-growth and subsequent proliferation. Micro-fabrication technology was used to generate specific topography to investigate the relationship between the cells and surface. In this study the pits-patterned surfaces of polystyrene (PS) film with diameters 2.2 and 0.45 microm were prepared by phase-separation, and the corresponding scale islands-patterned PLLA surface was prepared by a molding technique using the pits-patterned PS as a template. The adhesion and proliferation behavior of OCT-1 osteoblast-like cells morphology on the pits- and islands-patterned surface were characterized by SEM observation, cell attachment efficiency measurement and MTT assay. The results showed that the cell adhesion could be enhanced on PLLA and PS surface with nano-scale and micro-scale roughness compared to the smooth surfaces of the PLLA and PS. The OCT-1 osteoblast-like cells could grow along the surface with two different size islands of PLLA and grow inside the micro-scale pits of the PS. However, the proliferation of cells on the micro- and nano-scale patterned surface has not been enhanced compared with the controlled smooth surface.

Animals↗
PubMed2005

Ultrasound-induced capping of polystyrene on TiO2 nanoparticles by precipitation with compressed CO2 as antisolvent.

In this work, a route for the synthesis of inorganic/polymer core/shell composite nanoparticles was proposed, which can be called the antisolvent-ultrasound method. Compressed CO2 was used as antisolvent to precipitate the polymer from its solution dispersed with inorganic nanoparticles, during which ultrasonic irradiation was used to induce the coating of precipitated polymers on the surfaces of the inorganic nanoparticles. TiO2/polystyrene (PS) core/shell nanocomposites have been successfully prepared using this method. The transmission electronic micrographs (TEM) of the obtained nanocomposites show that the TiO2 nanoparticles are coated by the PS shells, of which the thickness can be tuned by the pressure of CO2. The phase structure, absorption properties, and thermal stability of the composite were characterized by X-ray diffraction (XRD), UV-vis spectra, and thermogravimetry, respectively. The results of X-ray photoelectron spectra (XPS) indicate the formation of a strong interaction between PS and TiO2 nanoparticles in the resultant products. This method has some potential advantages for applications and may be easily applied to the preparation of a range of inorganic/polymer core/shell composite nanoparticles.

Carbon Dioxide↗
PubMed2004

Compressed CO2-enhanced solubilization of 1-butyl-3-methylimidazolium tetrafluoroborate in reverse micelles of Triton X-100.

We carried out the first study about the effect of a compressed gas on the properties of reverse micellar solutions with ionic liquid (IL) polar cores. And the properties of compressed CO2/cyclohexane/1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4])/Triton X-100 (TX-100) system were investigated at 288.2, 293.2, 298.2, 308.2 K and different pressures by using phase behavior measurement, small-angle x-ray scattering, and UV-Vis techniques. The concentration of the surfactant in the solution was 0.3 mol/l (M). It was found that compressed CO2 could enhance solubilization of the IL in the reverse micelles considerably at suitable pressures, and formation of the reverse micelles could be controlled easily by pressure. Increase of CO2 pressure resulted in decrease of the micellar sizes at fixed [bmim][BF4]-to-surfactant molar ratios (w), and the size of the reverse micelles increased with the increase of w values. The polarity of the IL cores increased continuously with increasing w value.

Journal Article↗
PubMed2004

Enhancement of the solubilization capacity of water in Triton X-100/cyclohexane/water system by compressed gases.

The effect of compressed CO2 and ethylene on the properties of Triton X-100/cyclohexane/water systems was studied at different temperatures and pressures. Surprisingly, it was discovered that the compressed gases had the functions of co-surfactants. At suitable pressures, the water-to-surfactant molar ratio (W0) was enhanced significantly by the dissolution of the gas in the solution. The microenvironment in the reverse micelles was investigated by UV-visible spectroscopy by using methyl orange (MO) as a probe. The influence of n-hexane, Na2CO3, NaHCO3, H2C2O4, and CaCl2 at various concentrations on the solubilization of water in the absence of compressed gases was also investigated in order to obtain some information about the mechanism of the interesting phenomenon. This new route to stabilize reverse micelles may have potential applications to other similar systems. Moreover, the results of this work provide some useful information to get insight into the mechanism of co-surfactants, because a conventional co-surfactant usually contains both polar group and hydrocarbon chain, and it is very difficult to clarify the functions these two groups, while the gases used in this work are small nonpolar molecules, which solely have the function of the hydrocarbon chain in a co-surfactant.

Journal Article↗