Biomedical subjects

C A Codemard

Publications and source records attributed to C A Codemard.

4 recordsLinked to original sources

PubMed2006

High-power continuous-wave cladding-pumped Raman fiber laser.

We demonstrate a high-power single-mode cladding-pumped Raman fiber laser. The Raman fiber laser consists of a 1.2 km long germanium-doped double-clad fiber in a linear cavity, which is spliced to a single-mode fiber. The laser is end pumped by a multimode erbium-ytterbium-doped fiber, which is coupled to the inner cladding of the Raman fiber. The embedded core was designed to be single mode at the Raman Stokes wavelength, and up to 10 W of power was obtained at 1660 nm from the single-mode fiber end. The laser has a slope efficiency of 67% and a threshold of 6.5 W.

Journal Article↗

PubMed2005

High-power tunable single-frequency single-mode erbium:ytterbium codoped large-core fiber master-oscillator power amplifier source.

We present a cladding-pumped single-frequency, single-mode erbium:ytterbium codoped fiber master-oscillator power amplifier source generating up to 151 W of continuous-wave output power at 1563 nm with 33% slope efficiency and 20 dB gain. This source was also tunable and had a stable operation range of 1546 to 1566 nm at an output power level in excess of 125 W. The doped fiber exploited a large-core design for improved power handling and mitigation of stimulated Brillouin scattering. There was no sign of having stimulated Brillouin scattering even at the highest power. Despite a large core (V = 12), the output beam was nearly diffraction limited (M2 = 1.1). The source showed slight rollover at over 100 W of output power because of the onset of emission from ytterbium, centered at 1060 nm.

Journal Article↗

PubMed2005

Single-mode plane-polarized ytterbium-doped large-core fiber laser with 633-W continuous-wave output power.

We demonstrate a cladding-pumped single-mode plane-polarized ytterbium-doped fiber laser generating 633 W of continuous-wave output power at 1.1 microm with 67% slope efficiency and a polarization extinction ratio better than 16 dB. The laser is end pumped through both fiber ends and shows no evidence of roll-over, even at the highest output power, which is limited only by the available pump power.

Journal Article↗

PubMed2005

Single-frequency, single-mode, plane-polarized ytterbium-doped fiber master oscillator power amplifier source with 264 W of output power.

We present a single-frequency, single-mode, plane-polarized ytterbium-doped all-fiber master oscillator power amplifier source at 1060 nm generating 264 W of continuous-wave output power. The final-stage amplifier operated with a high gain of 19 dB and a high conversion efficiency of 68%. There was no evidence of rollover from stimulated Brillouin scattering even at the highest output power, and the maximum output was limited only by the available pump power.

Journal Article↗