Biomedical subjects

C A Haynes

Publications and source records attributed to C A Haynes.

At least 19 recordsLinked to original sources

PubMed2001

Binding specificity and thermodynamics of a family 9 carbohydrate-binding module from Thermotoga maritima xylanase 10A.

The C-terminal family 9 carbohydrate-binding module of xylanase 10A from Thermotoga maritima (CBM9-2) binds to amorphous cellulose, crystalline cellulose, and the insoluble fraction of oat spelt xylan. The association constants (K(a)) for adsorption to insoluble polysaccharides are 1 x 10(5) to 3 x 10(5) M(-1). Of the soluble polysaccharides tested, CBM9-2 binds to barley beta-glucan, xyloglucan, and xylan. CBM9-2 binds specifically to the reducing ends of cellulose and soluble polysaccharides, a property that is currently unique to this CBM. CBM9-2 also binds glucose, xylose, galactose, arabinose, cellooligosaccharides, xylooligosaccharides, maltose, and lactose, with affinities ranging from 10(3) M(-1) for monosaccharides to 10(6) M(-1) for disaccharides and oligosaccharides. Cellooligosaccharides longer than two glucose units do not bind with improved affinity, indicating that cellobiose is sufficient to occupy the entire binding site. In general, the binding reaction is dominated by favorable changes in enthalpy, which are partially compensated by unfavorable entropy changes.

Amino Acid Motifs↗

PubMed2000

Binding site analysis of cellulose binding domain CBD(N1) from endoglucanse C of Cellulomonas fimi by site-directed mutagenesis.

Endoglucanase C (CenC), a beta1,4 glucanase from the soil bacterium Cellulomonas fimi, binds to amorphous cellulose via two homologous cellulose binding domains, termed CBD(N1) and CBD(N2). In this work, the contributions of 10 amino acids within the binding cleft of CBD(N1) were evaluated by single site-directed mutations to alanine residues. Each isolated domain containing a single mutation was analyzed for binding to an insoluble amorphous preparation of cellulose, phosphoric acid swollen Avicel (PASA), and to a soluble glucopyranoside polymer, barley beta-glucan. The effect of any given mutation on CBD binding was similar for both substrates, suggesting that the mechanism of binding to soluble and insoluble substrates is the same. Tyrosines 19 and 85 were essential for tight binding by CBD(N1) as their replacement by alanine results in affinity decrements of approximately 100-fold on PASA, barley beta-glucan, and soluble cellooligosaccharides. The tertiary structures of unbound Y19A and Y85A were assessed by heteronuclear single quantum coherence (HSQC) spectroscopy. These studies indicated that the structures of both mutants were perturbed but that all perturbations are very near to the site of mutation.

Alanine↗

PubMed2000

Crystal structure of enteropathogenic Escherichia coli intimin-receptor complex.

Intimin and its translocated intimin receptor (Tir) are bacterial proteins that mediate adhesion between mammalian cells and attaching and effacing (A/E) pathogens. Enteropathogenic Escherichia coli (EPEC) causes significant paediatric morbidity and mortality world-wide. A related A/E pathogen, enterohaemorrhagic E. coli (EHEC; O157:H7) is one of the most important food-borne pathogens in North America, Europe and Japan. A unique and essential feature of A/E bacterial pathogens is the formation of actin-rich pedestals beneath the intimately adherent bacteria and localized destruction of the intestinal brush border. The bacterial outer membrane adhesin, intimin, is necessary for the production of the A/E lesion and diarrhoea. The A/E bacteria translocate their own receptor for intimin, Tir, into the membrane of mammalian cells using the type III secretion system. The translocated Tir triggers additional host signalling events and actin nucleation, which are essential for lesion formation. Here we describe the the crystal structures of an EPEC intimin carboxy-terminal fragment alone and in complex with the EPEC Tir intimin-binding domain, giving insight into the molecular mechanisms of adhesion of A/E pathogens.

Adhesins, Bacterial↗

PubMed2000

Analysis of compression of polymer mushrooms using self-consistent field theory.

A number of new technologies, including new-generation biomaterials and chromatography resins, are based on passivation and modification of surfaces by terminally attaching polymer chains to the surface. However, little is known about these systems at the molecular level. In this work the compression of a single end-grafted polymer chain (or mushroom) by a disc of finite radius was investigated using a self-consistent field (SCF) lattice model. In accordance with results predicted using scaling theory [Subramanian et al., Europhys. Lett. 29 (1995) 285 and Macromolecules 29 (1996) 4045], the compressed chain undergoes a smooth escape transition. However, under the assumption of angular symmetry, a first-order escape transition of the end-grafted chain is not observed, suggesting that the formation of a tether is required for the predicted phase transition. Segment density distributions and compression energies are calculated in a cylindrical lattice. The energy required to compress a chain increases monotonically as the disc is moved closer to the surface and becomes independent of chain length at strong compressions where the work of compression involves only confinement of the tether joining the escaped chain fraction to the grafting point.

Polymers↗

PubMed2000

Analysis of brush-particle interactions using self-consistent-field theory.

Non-specific protein adsorption can be reduced by attaching polymer chains by one end to a sorbent surface. End-grafted polymer modified surfaces have also found application in size-based chromatographic bioseparations. To better understand how to tailor surfaces for these applications, a numerical SCF model has been used to calculate theoretical results for the polymer density distribution of interacting polymer chains around a solute particle positioned at a fixed distance from a surface. In addition, the excess energy required to move the particle into the polymer chains (interaction energy) is calculated using a statistical mechanical treatment of the lattice model. The effect of system variables such as particle size, chain length, surface density and Flory interaction parameters on density distributions and interaction energies is also studied. Calculations for the interaction of a solute particle with a surface covered by many polymer chains (a brush) show that the polymer segments will fill in behind the particle quite rapidly as it moves toward the surface. When there is no strong energetic attraction between the polymer and solute we predict that the interaction energy will be purely repulsive upon compression due to losses in conformational entropy of the polymer chains. Above a critical chain length, which depends upon particle size, a maximum in the force required to move the particle toward the surface is observed due to an engulfment of the particle as chains attempt to access the free volume behind the particle. If an attraction exists between the polymer and solute, such that a minimum in the interaction energy is seen, the optimum conditions for solute repulsion occur at the highest surface density attainable. Long chain length can lead to increased solute concentration within the polymer layer due to the fact that an increased number of favourable polymer-solute contacts are able to occur than with short chains at a similar entropic penalty.

Entropy↗

PubMed2000

Size exclusion chromatography does not require pores.

Separation of macromolecules on the basis of their molecular weight by size exclusion chromatography has long been considered to be caused by the geometry-dependent partition of macromolecules between a continuous phase and the porous interior of a gel or cross-linked bead. The volume of a pore accessible to a solute is limited by its relative dimensions, so larger molecules will have access to a smaller volume and will remain in a bead for a shorter time than smaller solutes. Our recent alternate picture proposes that the partition coefficient can be calculated from a thermodynamic model for the free energy of mixing of the solute with the gel phase. Size-dependent exclusion caused by the unfavorable entropy of mixing associated with the partition is predicted; the magnitude of the effect is modified by enthalpic interactions between the solute and the gel phase. This concept is extended here to describe the partition of macromolecules into a layer of terminally attached polymer chains grafted onto a solid bead. Both simple mean field and self-consistent field theory calculations predict size-dependent entropic exclusion. Experimental results obtained with neutral polymer chains grafted onto solid polystyrene latex beads confirm the predictions.

Chromatography↗

PubMed2000

Structure and binding specificity of the second N-terminal cellulose-binding domain from Cellulomonas fimi endoglucanase C.

The 1,4-beta-glucanase CenC from Cellulomonas fimi contains two cellulose-binding domains, CBD(N1) and CBD(N2), arranged in tandem at its N-terminus. These homologous CBDs are distinct in their selectivity for binding amorphous and not crystalline cellulose. Multidimensional heteronuclear nuclear magnetic resonance (NMR) spectroscopy was used to determine the tertiary structure of CBD(N2) in the presence of saturating amounts of cellopentaose. A total of 1996 experimental restraints were used to calculate an ensemble of 21 final structures for the protein. CBD(Nu2) is composed of 11 beta-strands, folded into two antiparallel beta-sheets, with a topology of a jellyroll beta-sandwich. On the basis of patterns of chemical shift perturbations accompanying the addition of cellooligosaccharides, as well as the observation of intermolecular protein-sugar NOE interactions, the cellulose-binding site of CBD(N2) was identified as a cleft that lies across one face of the beta-sandwich. The thermodynamic basis for the binding of cellooligosaccharides was investigated using isothermal titration calorimetry and NMR spectroscopy. Binding is enthalpically driven and consistent with a structural model involving hydrogen bonding between the equatorial hydroxyls of the glucopyranosyl rings and polar amino acid side chains lining the CBD(N2) cleft. Affinity electrophoresis was used to determine that CBD(N2) also binds soluble beta-1,4-linked polymers of glucose, including hydroxyethylcellulose and beta-1,3-1,4-glucans. This study complements a previous analysis of CBD(N1) [Johnson, P. E., Joshi, M. D., Tomme, P., Kilburn, D. G., and McIntosh, L. P. (1996) Biochemistry 35, 14381-14394] and demonstrates that the homologous CBDs from CenC share very similar structures and sugar binding properties.

Actinomycetales↗

PubMed2000

Macromolecular crowding and its consequences.

Incompatible pairs of polymers separate into two phases in aqueous solution above a few percentage points total concentration. Protein pairs can also produce phase separation, but at somewhat higher concentrations. In this chapter, we explore the effect of high background concentrations of macromolecules on phase separation of pairs of species which would not be at sufficiently high concentration to separate in the absence of the uninvolved species. Effects produced by such high background concentrations are known as macromolecular crowding. Dramatic enhancements in various association reactions due to crowding have been predicted and observed but its effects on phase separation in biological mixtures typical of the cytoplasm have not been examined. Here, we describe a calculation based on the Flory-Huggins treatment of concentrated polymer solutions that sheds some light on this issue. We find that a background of 20 wt % of a high molecular weight species greatly reduces the concentrations needed to produce phase separation in a mixture of two incompatible macromolecules if one is more hydrophobic than the other. Given the high total concentration of macromolecules in cytoplasm, it is perhaps surprising that phases have not been observed. This issue is discussed and some explanations offered.

Bacterial Proteins↗

PubMed2000

Analysis of binding of the family 2a carbohydrate-binding module from Cellulomonas fimi xylanase 10A to cellulose: specificity and identification of functionally important amino acid residues.

The family 2a carbohydrate-binding module (CBM2a) of xylanase 10A from Cellulomonas fimi binds to the crystalline regions of cellulose. It does not share binding sites with the N-terminal family 4 binding module (CBM4-1) from the cellulase 9B from C.fimi, a module that binds strictly to soluble sugars and amorphous cellulose. The binding of CBM2a to crystalline matrices is mediated by several residues on the binding face, including three prominent, solvent-exposed tryptophan residues. Binding to crystalline cellulose was analyzed by making a series of conservative (phenylalanine and tyrosine) and non-conservative substitutions (alanine) of each solvent-exposed tryptophan (W17, W54 and W72). Other residues on the binding face with hydrogen bonding potential were substituted with alanine. Each tryptophan plays a different role in binding; a tryptophan is essential at position 54, a tyrosine or tryptophan at position 17 and any aromatic residue at position 72. Other residues on the binding face, with the exception of N15, are not essential determinants of binding affinity. Given the specificity of CBM2a, the structure of crystalline cellulose and the dynamic nature of the binding of CBM2a, we propose a model for the interaction between the polypeptide and the crystalline surface.

Actinomycetales↗

PubMed1999

Concentration-dependent internalization of a cytokine/cytokine receptor complex in human hematopoietic cells.

Soluble steel factor (SF) is a potent stimulator of hematopoietic progenitor cell proliferation in vitro, and cytokine combinations that include SF can support extensive expansions of hematopoietic cells. Recently, we showed that very primitive progenitor cells from normal human bone marrow require exposure to very high concentrations of cytokines to maintain their primitive status while proliferating. These cells also display higher cell-specific cytokine uptake rates than more differentiated types of hematopoietic cells. As a first step toward identifying the mechanisms involved in mediating such cytokine dose-dependent effects, we have now investigated the kinetics of SF receptor (c-kit) internalization by human Mo7e cells exposed to different extracellular concentrations of soluble SF. Transfer of Mo7e cells to a higher concentration of SF caused an initially rapid downregulation of cell surface c-kit which was accompanied by a rapid depletion of extracellular SF. Confocal microscopy showed a concomitant increase in the number and intensity of intracellular c-kit aggregates. After the first 30 min, the cells continued to deplete SF from the medium but at a much slower rate. During this period, there was a gradual recovery of expression of c-kit on the cell surface. A mathematical analysis of bulk medium to cell-surface SF-mass transport indicated that the cytokine-depletion rates measured were not likely to have significantly depleted the SF concentration in the microenvironment of the cells. Taken together, these results underscore the importance of monitoring and appropriately regulating cytokine concentrations in hematopoietic cell expansion cultures. They may also help to explain the different biological responses exhibited by primitive hematopoietic cells exposed to different types and concentrations of cytokines for periods of days.

Animals↗

PubMed1998

Calcium binding by the N-terminal cellulose-binding domain from Cellulomonas fimi beta-1,4-glucanase CenC.

The interaction of the N-terminal cellulose-binding domain, CBDN1, from Cellulomonas fimi beta-1,4-glucanase CenC with calcium was investigated using NMR spectroscopy and calorimetry. CBDN1 binds a single calcium ion with an equilibrium association constant of approximately 10(5) M-1 at 35 degreesC and pH 6.0. Binding is exothermic (-42 +/- 2 kJ mol-1) under these conditions and is accompanied by a small negative change in heat capacity (DeltaCp = -0.41 +/- 0.16 kJ mol-1 K-1). From an NMR line shape analysis, the rate constants for calcium association and dissociation were found to be (5 +/- 2) x 10(7) s-1 M-1 and (4.5 +/- 0.6) x 10(2) s-1, respectively. The rapid association kinetics indicate that the calcium-binding site on CBDN1 is accessible and, to the first approximation, preformed. Based on patterns of chemical shift perturbations, and structural comparisons with the Bacillus sp. 1, 3-1,4-beta-glucanases, the backbone carbonyl oxygens of Thr8, Gly30, and Asp142 and a side chain carboxyl oxygen of Asp142 are postulated to form the calcium-binding site of CBDN1. Consistent with the calcium-independent affinity of CBDN1 for cellopentaose, this exposed site is located on the face of CBDN1 opposite to that forming the oligosaccharide-binding cleft. The midpoint denaturation temperature of CBDN1 is increased by approximately 8 degreesC at pH 6.0 in the presence of saturating amounts of calcium, confirming that metal ion binding is thermodynamically linked to native-state stability.

Bacterial Proteins↗

PubMed1998

Characterization and affinity applications of cellulose-binding domains.

Cellulose-binding domains (CBDs) are discrete protein modules found in a large number of carbohydrolases and a few nonhydrolytic proteins. To date, almost 200 sequences can be classified in 13 different families with distinctly different properties. CBDs vary in size from 4 to 20 kDa and occur at different positions within the polypeptides; N-terminal, C-terminal and internal. They have a moderately high and specific affinity for insoluble or soluble cellulosics with dissociation constants in the low micromolar range. Some CBDs bind irreversibly to cellulose and can be used for applications involving immobilization, others bind reversibly and are more useful for separations and purifications. Dependent on the CBD used, desorption from the matrix can be promoted under various different conditions including denaturants (urea, high pH), water, or specific competitive ligands (e.g. cellobiose). Family I and IV CBDs bind reversibly to cellulose in contrast to family II and III CBDs which are in general, irreversibly bound. The binding of family II CBDs (CBD(Cex)) to crystalline cellulose is characterized by a large favourable increase in entropy indicating that dehydration of the sorbent and the protein are the major driving forces for binding. In contrast, binding of family IV CBDs (CBD(N1)) to amorphous or soluble cellulosics is driven by a favourable change in enthalpy which is partially offset by an unfavourable entropy change. Hydrogen bond formation and van der Waals interactions are the main driving forces for binding. CBDs with affinity for crystalline cellulose are useful tags for classical column affinity chromatography. The affinity of CBD(N1) for soluble cellulosics makes it suitable for use in large-scale aqueous two-phase affinity partitioning systems.

Binding Sites↗

PubMed1998

Driving forces for phase separation and partitioning in aqueous two-phase systems.

A set of simple analytical equations, derived from the Flory-Huggins theory, are used to identify the dominant driving forces for phase separation and solute (e.g., protein) partitioning, in the absence and presence of added electrolyte, in every general class of aqueous two-phase systems. The resulting model appears to capture the basic nature of two-phase systems and all trends observed experimentally. Case studies are used to identify fundamental differences in and the magnitudes of enthalpic and entropic contributions to partitioning in polymer-polymer (e.g., PEG-dextran), polymer-salt, and thermoseparating polymer-water (e.g., UCON-water) two-phase systems. The model therefore provides practitioners with a better understanding of partition systems, and industry with a simple, fundamental tool for selecting an appropriate two-phase system for a particular separation.

Chemistry Techniques, Analytical↗

PubMed1998

Stability and oligosaccharide binding of the N1 cellulose-binding domain of Cellulomonas fimi endoglucanase CenC.

Differential scanning calorimetry has been used to study the thermal stability and oligosaccharide-binding thermodynamics of the N-terminal cellulose-binding domain of Cellulomonas fimi beta-1,4-glucanase CenC (CBDN1). CBDN1 has a relatively low maximum stability (delta Gmax = 33 kJ/mol = 216 J/residue at 1 degree C and pH 6.1) compared to other small single-domain globular proteins. The unfolding is fully reversible between pH 5.5 and 9 and in accordance with the two-state equilibrium model between pH 5.5 and 11. When the single disulfide bond in CBDN1 is reduced, the protein remains unfolded at all conditions, as judged by NMR spectroscopy. This indicates that the intramolecular cross-link makes a major contribution to the stability of CBDN1. The measured heat capacity change of unfolding (delta Cp = 7.5 kJ mol-1 K-1) agrees well with that calculated from the predicted changes in the solvent accessible nonpolar and polar surface areas upon unfolding. Extrapolation of the specific enthalpy and entropy of unfolding to their respective convergence temperature indicates that per residue unfolding energies for CBDN1, an isolated domain, are in accordance with those found by Privalov (1) for many single-domain globular proteins. DSC thermograms of the unfolding of CBDN1 in the presence of various concentrations of cellopentaose were fit to a thermodynamic model describing the linkage between protein-ligand binding and protein unfolding. A global two-dimensional minimization routine is used to regress the binding enthalpy, binding constant, and unfolding thermodynamics for the CBDN1-cellopentaose system. Extrapolated binding constants are in quantitative agreement with those determined by isothermal titration calorimetry at 35 degrees C.

Binding Sites↗

PubMed1997

Surface diffusion of cellulases and their isolated binding domains on cellulose.

The surface diffusion rate of bacterial cellulases from Cellulomonas fimi on cellulose was quantified using fluorescence recovery after photobleaching analysis. Studies were performed on an exo-beta-1-4-glycanase (Cex), an endo-beta-1-4-glucanase (CenA), and their respective isolated cellulose-binding domains (CBDs). Although these cellulose-binding domains bind irreversibly to microcrystalline cellulose, greater than 70% of bound molecules are mobile on the cellulose surface. Surface diffusion rates are dependent on surface coverage and range from a low of 2 x 10(-11) to a maximum of 1.2 x 10(-10) cm2/s. The fraction of mobile molecules increases only slightly with increasing fractional surface coverage density. Results demonstrate that the packing of C. fimi cellulases and their isolated binding domains onto the cellulose surface is a dynamic process. This suggests that the exclusion of potential CBD binding sites on the cellulose due to steric effects of neighboring bound CBDs may not fully explain the apparent negative cooperativity exhibited in CBD adsorption isotherms. Comparison with the kinetics of cellulase hydrolysis of crystalline substrate suggests that surface diffusion rates do not limit cellulase activity.

Cellulase↗

PubMed1997

Thermostability and irreversible activity loss of exoglucanase/xylanase Cex from Cellulomonas fimi.

The activity of the beta-1,4-glycanase Cex (EC 3.2.1.91) from Cellulomonas fimi is investigated in connection with its industrial application in cellulose hydrolysis and its potential use in cellosaccharide synthesis. Catalytic activity measurements as a function of temperature, complemented with differential scanning calorimetry (DSC) data, are used to characterize the thermostability of the protein and the influence of interdomain interactions. The data suggest that the enzyme is irreversibly deactivated in one of two possible ways: (1) through a low-temperature route characterized by first-order kinetics; or (2) through a high-temperature route characterized by an initial reversible step followed by an irreversible step. Melting temperatures (Tm) of Cex and p-33 (the isolated catalytic domain of Cex) as estimated by DSC are 64.2 and 64.0 degrees C, respectively, suggesting that the binding and catalytic domains of the protein fold independently. Kinetic parameters (Km, kcat, and kcat/Km) of Cex for the hydrolysis of p-nitrophenyl beta-D-cellobioside (pNPC) were determined at temperatures ranging from 15 to 80 degrees C. As demanded by reversible mass-action thermodynamics, the Tm of Cex in the presence of excess ligand as determined from activity-temperature data is ca. 66.55 degrees C, more than 2 degrees C higher than the Tm for Cex under ligand-free conditions. The effect of temperature on the rate constant has been determined using Arrhenius plots. Combined with irreversible deactivation half-life data and DSC data, the results are used to evaluate a model, based on a theory developed by Hei et al. (1993), for predicting the time-dependent activity and active-state stability of the protein under a range of potential operating conditions.

Algorithms↗

PubMed1996

Interaction of polysaccharides with the N-terminal cellulose-binding domain of Cellulomonas fimi CenC. 1. Binding specificity and calorimetric analysis.

The carbohydrate-binding specificity of the N-terminal cellulose-binding domain (CBDN1) from Cellulomonas fimi beta-1,4-glucanase C (CenC) was investigated using affinity electrophoresis, binding assays and microcalorimetry in parallel with NMR and difference ultraviolet absorbance spectroscopy [Johnson, P.E., Tomme, P., Joshi, M.D., & McIntosh, I., P. (1996) Biochemistry 35, 13895-13906]. Binding of CBDN1 on insoluble cellulose is distinctly different from other cellulose-binding domains. CBDN1 binds amorphous cellulose (phosphoric acid-swollen) with high affinity (Kr = 5.1 L g-1), binds Avicel weakly and does not bind highly crystalline bacterial or tunicin cellulose. Moreover, CBDN1 binds soluble cellooligosaccharides and beta-1,4-linked oligomers of glucose such as hydroxyethycellulose, soluble beta-1,3-1,4-glucans from barley and oat, but has no affinity for alpha-1,4-, beta-1,3-, or beta-1,6-polymers of glucose. This is the first report of a cellulose-binding domain with strong and specific affinity for soluble glycans. The thermodynamics for binding of CBDN1 to oligosaccharides, soluble glycans, and phosphoric acid-swollen cellulose were investigated by titration microcalorimetry. At least four beta-1,4-linked glucopyranosides are required to detect binding. For larger glucans, with five or more glucopyranoside units, the binding constants and standard free energy changes are virtually independent of the glucan chain length, indicating that cellopentaose completely fills the binding site. Binding is moderately strong with binding constants ranging from 3,200 +/- 500 M-1 for cellotetraose, to 25,000 +/- 3,000 M-1 for the larger sugars. The reactions are controlled by favorable standard free enthalpy changes which are compensated in a linear fashion by a significant decrease in entropy. A predominance of polar interactions such as hydrogen bonding together with van der Waals interactions provide the major driving forces for the binding event.

Actinomycetales↗

PubMed1996

Binding of the cellulose-binding domain of exoglucanase Cex from Cellulomonas fimi to insoluble microcrystalline cellulose is entropically driven.

Isothermal titration microcalorimetry is combined with solution-depletion isotherm data to analyze the thermodynamics of binding of the cellulose-binding domain (CBD) from the beta-1,4-(exo)glucanase Cex of Cellulomonas fimi to insoluble bacterial microcrystalline cellulose. Analysis of isothermal titration microcalorimetry data against two putative binding models indicates that the bacterial microcrystalline cellulose surface presents two independent classes of binding sites, with the predominant high-affinity site being characterized by a Langmuir-type Ka of 6.3 (+/-1.4) x 10(7) M-1 and the low-affinity site by a Ka of 1.1 (+/-0.6) x 10(6) M-1. CBDCex binding to either site is exothermic, but is mainly driven by a large positive change in entropy. This differs from protein binding to soluble carbohydrates, which is usually driven by a relatively large exothermic standard enthalpy change for binding. Differential heat capacity changes are large and negative, indicating that sorbent and protein dehydration effects make a dominant contribution to the driving force for binding.

Binding Sites↗