PubMed Health⌕ Search

Biomedical subjects

C A Mirkin

Publications and source records attributed to C A Mirkin.

At least 19 recordsLinked to original sources

Direct patterning of modified oligonucleotides on metals and insulators by dip-pen nanolithography.

The use of direct-write dip-pen nanolithography (DPN) to generate covalently anchored, nanoscale patterns of oligonucleotides on both metallic and insulating substrates is described. Modification of DNA with hexanethiol groups allowed patterning on gold, and oligonucleotides bearing 5'-terminal acrylamide groups could be patterned on derivatized silica. Feature sizes ranging from many micrometers to less than 100 nanometers were achieved, and the resulting patterns exhibited the sequence-specific binding properties of the DNA from which they were composed. The patterns can be used to direct the assembly of individual oligonucleotide-modified particles on a surface, and the deposition of multiple DNA sequences in a single array is demonstrated.

Adsorption↗

Photoinduced conversion of silver nanospheres to nanoprisms.

A photoinduced method for converting large quantities of silver nanospheres into triangular nanoprisms is reported. The photo-process has been characterized by time-dependent ultraviolet-visible spectroscopy and transmission electron microscopy, allowing for the observation of several key intermediates in and characteristics of the conversion process. This light-driven process results in a colloid with distinctive optical properties that directly relate to the nanoprism shape of the particles. Theoretical calculations coupled with experimental observations allow for the assignment of the nanoprism plasmon bands and for the first identification of two distinct quadrupole plasmon resonances for a nanoparticle. Unlike the spherical particles they are derived from that Rayleigh light-scatter in the blue, these nanoprisms exhibit scattering in the red, which could be useful in developing multicolor diagnostic labels on the basis not only of nanoparticle composition and size but also of shape.

Anisotropy↗

Surface organization and nanopatterning of collagen by dip-pen nanolithography.

Collagen is a key fibrous protein in biological systems, characterized by a complex structural hierarchy as well as the ability to self-assemble into liquid crystalline mesophases. The structural features of collagen influence cellular responses and material properties, with importance for a wide range of biomaterials and tissue architectures. The mechanism by which fibrillar collagen structures form from liquid crystalline mesophases is not well characterized. We report positive printing of collagen and a collagen-like peptide down to 30-50-nm line widths, using the atomic force microscopy technique of dip-pen nanolithography. The method preserved the triple-helical structure and biological activity of collagen and even fostered the formation of characteristic higher levels of structural organization. The "direct-write" capability of biologically relevant molecules, while preserving their structure and functionality, provides tremendous flexibility in future biological device applications and in proteomics arrays, as well as a new strategy to study the important hierarchical assembly processes of biological systems.

Collagen↗

"Dip-Pen" nanolithography on semiconductor surfaces.

Dip-Pen Nanolithography (DPN) uses an AFM tip to deposit organic molecules through a meniscus onto an underlying substrate under ambient conditions. Thus far, the methodology has been developed exclusively for gold using alkyl or aryl thiols as inks. This study describes the first application of DPN to write organic patterns with sub-100 nm dimensions directly onto two different semiconductor surfaces: silicon and gallium arsenide. Using hexamethyldisilazane (HMDS) as the ink in the DPN procedure, we were able to utilize lateral force microscopy (LFM) images to differentiate between oxidized semiconductor surfaces and patterned areas with deposited monolayers of HMDS. The choice of the silazane ink is a critical component of the process since adsorbates such as trichlorosilanes are incompatible with the water meniscus and polymerize during ink deposition. This work provides insight into additional factors, such as temperature and adsorbate reactivity, that control the rate of the DPN process and paves the way for researchers to interface organic and biological structures generated via DPN with electronically important semiconductor substrates.

Gold↗

Terthienyl and poly-terthienyl ligands as redox-switchable hemilabile ligands for oxidation-state-dependent molecular uptake and release.

Mononuclear, dinuclear, and polymeric Ru(II) complexes formed from terthienylalkylphosphino redox-switchable hemilabile ligands demonstrate that this class of ligand provides electrochemical control over the electronic properties, coordination environments, and reactivities of bound transition metals. Specifically, [CpRuCO(kappa(2)-3'-(2-diphenylphosphinoethyl)-5,5' '-dimethyl-2,2':5',2' '-terthiophene)][B(C(6)H(3)-3,5-(CF(3))(2))(4)] (4a) exhibits a 3 orders of magnitude increase in binding affinity for acetonitrile upon terthienyl-based oxidation. FT-IR spectroelectrochemical experiments on 4a indicate that terthienyl-based oxidation removes electron density from the metal center, equivalent to approximately 11-17% of the electronic change that occurs upon direct oxidation of Ru(II) to Ru(III) in analogous complexes. The spectroelectrochemical responses of 4a were compared to those of dimeric and polymeric analogues of 4a. The spectroelectrochemistry of the dimer is consistent with two sequential, one-electron ligand-based oxidations, compared to only one in 4a. In contrast, the polymer exhibits spectroelectrochemical behavior similar to that of 4a. The polymer spectroelectrochemistry shows changes in the metal center electronic properties between two different states, reflective of two discrete oxidation states of the polymeric ligand backbone. We propose that the polymer backbone does not allow one to vary the electronic properties of the metal center through a continuous range of oxidation states due to charge localization within the metalated films. In an effort to explore the molecular uptake and release properties of 4a and its polymer analogue as a function of ligand oxidation state, the oxidation-state-dependent coordination chemistries of 4a and 4a(+)() with a variety of substrates were examined.

Journal Article↗

A fluorescence-based method for determining the surface coverage and hybridization efficiency of thiol-capped oligonucleotides bound to gold thin films and nanoparticles.

Using a fluorescence-based method, we have determined the number of thiol-derivatized single-stranded oligonucleotides bound to gold nanoparticles and their extent of hybridization with complementary oligonucleotides in solution. Oligonucleotide surface coverages of hexanethiol 12-mer oligonucleotides on gold nanoparticles (34 +/- 1 pmol/cm2) were significantly higher than on planar gold thin films (18 +/- 3 pmol/cm2), while the percentage of hybridizable strands on the gold nanoparticles (1.3 +/- 0.3 pmol/cm2, 4%) was lower than for gold thin films (6 +/- 2 pmol/cm2, 33%). A gradual increase in electrolyte concentration over the course of oligonucleotide deposition significantly increases surface coverage and consequently particle stability. In addition, oligonucleotide spacer sequences improve the hybridization efficiency of oligonucleotide-modified nanoparticles from approximately 4 to 44%. The surface coverage of recognition strands can be tailored using coadsorbed diluent oligonucleotides. This provides a means of indirectly controlling the average number of hybridized strands per nanoparticle. The work presented here has important implications with regard to understanding interactions between modified oligonucleotides and metal nanoparticles, as well as optimizing the sensitivity of gold nanoparticle-based oligonucleotide detection methods.

Gold↗

Scanometric DNA array detection with nanoparticle probes.

A method for analyzing combinatorial DNA arrays using oligonucleotide-modified gold nanoparticle probes and a conventional flatbed scanner is described here. Labeling oligonucleotide targets with nanoparticle rather than fluorophore probes substantially alters the melting profiles of the targets from an array substrate. This difference permits the discrimination of an oligonucleotide sequence from targets with single nucleotide mismatches with a selectivity that is over three times that observed for fluorophore-labeled targets. In addition, when coupled with a signal amplification method based on nanoparticle-promoted reduction of silver(I), the sensitivity of this scanometric array detection system exceeds that of the analogous fluorophore system by two orders of magnitude.

Base Pair Mismatch↗

Selective colorimetric detection of polynucleotides based on the distance-dependent optical properties of gold nanoparticles.

A highly selective, colorimetric polynucleotide detection method based on mercaptoalkyloligonucleotide-modified gold nanoparticle probes is reported. Introduction of a single-stranded target oligonucleotide (30 bases) into a solution containing the appropriate probes resulted in the formation of a polymeric network of nanoparticles with a concomitant red-to-pinkish/purple color change. Hybridization was facilitated by freezing and thawing of the solutions, and the denaturation of these hybrid materials showed transition temperatures over a narrow range that allowed differentiation of a variety of imperfect targets. Transfer of the hybridization mixture to a reverse-phase silica plate resulted in a blue color upon drying that could be detected visually. The unoptimized system can detect about 10 femtomoles of an oligonucleotide.

Biosensing Techniques↗

A DNA-based method for rationally assembling nanoparticles into macroscopic materials.

Colloidal particles of metals and semiconductors have potentially useful optical, optoelectronic and material properties that derive from their small (nanoscopic) size. These properties might lead to applications including chemical sensors, spectroscopic enhancers, quantum dot and nanostructure fabrication, and microimaging methods. A great deal of control can now be exercised over the chemical composition, size and polydispersity of colloidal particles, and many methods have been developed for assembling them into useful aggregates and materials. Here we describe a method for assembling colloidal gold nanoparticles rationally and reversibly into macroscopic aggregates. The method involves attaching to the surfaces of two batches of 13-nm gold particles non-complementary DNA oligonucleotides capped with thiol groups, which bind to gold. When we add to the solution an oligonucleotide duplex with 'sticky ends' that are complementary to the two grafted sequences, the nanoparticles self-assemble into aggregates. This assembly process can be reversed by thermal denaturation. This strategy should now make it possible to tailor the optical, electronic and structural properties of the colloidal aggregates by using the specificity of DNA interactions to direct the interactions between particles of different size and composition.

Base Sequence↗