PubMed Health⌕ Search

Biomedical subjects

C Betzel

Publications and source records attributed to C Betzel.

At least 19 recordsLinked to original sources

Insights into metal ion binding in phospholipases A2: ultra high-resolution crystal structures of an acidic phospholipase A2 in the Ca2+ free and bound states.

The electrophile Ca(2+) is an essential multifunctional co-factor in the phospholipase A(2) mediated hydrolysis of phospholipids. Crystal structures of an acidic phospholipase A(2) from the venom of Bothrops jararacussu have been determined both in the Ca(2+) free and bound states at 0.97 and 1.60 A resolutions, respectively. In the Ca(2+) bound state, the Ca(2+) ion is penta-coordinated by a distorted pyramidal cage of oxygen and nitrogen atoms that is significantly different to that observed in structures of other Group I/II phospholipases A(2). In the absence of Ca(2+), a water molecule occupies the position of the Ca(2+) ion and the side chain of Asp49 and the calcium-binding loop adopts a different conformation.

Animals↗

Purine activity of RNase T1RV is further improved by substitution of Trp59 by tyrosine.

Ribonuclease T1 is an enzyme that cleaves single-stranded RNA with high specificity after guanylyl residues. Although this enzyme is a very good characterized protein with respect to structure and enzymatic function, we were only recently successful in generating RNase T1-RV, a variant where the specificity was changed from guanine to purine. As this change of substrate specificity was made at the cost of activity, the aim was now to further improve the overall activity of the enzyme. Therefore, we have substituted the tryptophan in position 59 by tyrosine. This substitution led to an increase of enzymatic activity in comparison to variant RV to 425%. As the extent of this enhancement is unique so far we have crystallized and analyzed the structure of this variant in order to get more insights into the reasons for this. Here, we present the crystal structure of this so-called RNase T1-R2 at 2.1A resolution. The structure was determined by molecular replacement using the coordinates of the RV variant (PDB entry: 1Q9E). The data were refined to an R-factor of 18.7% and R(free) of 24%, respectively. The asymmetric unit contains three molecules and the crystal packing is very similar to that of variant RV.

Amino Acid Substitution↗

Investigations on the synthesis and crystallization of hydroxyapatite at low temperature.

An easy method to crystallize homogenous HAP at physiological pH as well as powders of HAP and CPP at low temperature are described. Platy and spherulitic crystals of HAP were crystallized at the physiological pH using single diffusion method. Well-defined platy crystals of hydroxyapatite were obtained at the physiological temperature and pH. These crystals were found to be pure and homogenous form of HAP without any contamination from the crystallizing medium. Spherulitic crystals of HAP of approximately 3 mm in diameter were obtained in the presence of Fe at 47 degrees C. A sol-gel technique involving agarose is described for the preparation of hydroxyapatite and calcium pyrophosphate. Pure form of HAP was synthesised at 85 degrees C and its sintering properties were also studied. At a temperature of 1200 degrees C, the material gets completely converted to alpha-calcium pyrophosphate. The samples were analysed by XRD, IR, TGA and SEM. The particle size of the synthesised powders was measured using the dynamic light scattering experiments.

Biocompatible Materials↗

Crystallization and structure analysis of Thermus flavus 5S rRNA helix B.

The crystallization conditions of the synthetic RNA duplex r(GCGGCGU)*r(GCGCCGC), part of the Thermus flavus 5S rRNA domain B, were investigated in detail. The crystallization analysis revealed a relative narrow crystallization zone. Single sequence variations did not enhance the crystal quality, however the crystallization under microgravity provided crystals of higher quality. They belong to the space group P3(1)21 with unit cell dimensions of a = b = 35.0 A and c = 141.2 A. Diffraction data up to 2.6 A were collected and the structure subsequently analysed and refined to an R-value of 22.4 %. The conformation of the two molecules in the asymmetric unit is stabilized by intermolecular hydrogen bonds. The two molecules A and B are perpendicular to each other and interacting head to tail with symmetry related molecules. They form pseudo-continuous infinite helices in the crystal lattice.

Base Sequence↗

Crystal structure of the jacalin-T-antigen complex and a comparative study of lectin-T-antigen complexes.

Thomsen-Friedenreich antigen (Galbeta1-3GalNAc), generally known as T-antigen, is expressed in more than 85% of human carcinomas. Therefore, proteins which specifically bind T-antigen have potential diagnostic value. Jacalin, a lectin from jack fruit (Artocarpus integrifolia) seeds, is a tetramer of molecular mass 66kDa. It is one of the very few proteins which are known to bind T-antigen. The crystal structure of the jacalin-T-antigen complex has been determined at 1.62A resolution. The interactions of the disaccharide at the binding site are predominantly through the GalNAc moiety, with Gal interacting only through water molecules. They include a hydrogen bond between the anomeric oxygen of GalNAc and the pi electrons of an aromatic side-chain. Several intermolecular interactions involving the bound carbohydrate contribute to the stability of the crystal structure. The present structure, along with that of the Me-alpha-Gal complex, provides a reasonable qualitative explanation for the known affinities of jacalin to different carbohydrate ligands and a plausible model of the binding of the lectin to T-antigen O-linked to seryl or threonyl residues. Including the present one, the structures of five lectin-T-antigen complexes are available. GalNAc occupies the primary binding site in three of them, while Gal occupies the site in two. The choice appears to be related to the ability of the lectin to bind sialylated sugars. In either case, most of the lectin-disaccharide interactions are at the primary binding site. The conformation of T-antigen in the five complexes is nearly the same.

Antigens, Tumor-Associated, Carbohydrate↗

Regulation of catalytic function by molecular association: structure of phospholipase A2 from Daboia russelli pulchella (DPLA2) at 1.9 A resolution.

The crystal structure of phospholipase A(2) from the venom of Daboia russelli pulchella has been refined to an R factor of 0.216 using 17,922 reflections to 1.9 A resolution. The structure contains two crystallographically independent molecules in the asymmetric unit. The overall conformations of the two molecules are essentially the same except for three regions, namely the calcium-binding loop including Trp31, the beta-wing and the C-terminal residues 119-131. Although these differences have apparently been caused by molecular packing, they seem to have functional relevance. Particularly noteworthy is the conformation of Trp31, which is favourable for substrate binding in one molecule as it is aligned with one of the side walls of the hydrophobic channel, whereas in the other molecule it is located at the mouth of the channel, thereby blocking the entry of substrates leading to loss of activity. This feature is unique to the present structure and does not occur in the dimers and trimers of other PLA(2)s.

Animals↗

Preliminary X-ray diffraction studies of the external functional unit RtH2-e from the Rapana thomasiana.

The 'external' oxygenated functional unit RtH2-e of the Rapana hemocyanin subunit RHSS2 was isolated and crystallized. X-ray intensity data to 3.3 A resolution have been collected at 100 K and the structure has been solved using the molecular-replacement method. The space group is assigned to be the tetragonal P4(3)2(1)2, with unit-cell parameters a = b = 105.5, c = 375.0 A.

Animals↗

Structure of the neurotoxic complex vipoxin at 1.4 A resolution.

Vipoxin is a neurotoxic postsynaptic heterodimeric complex from the venom of Vipera ammodytes meridionalis, the most toxic snake in Europe. It consists of a basic and highly toxic phospholipase A(2) and an acidic non-toxic protein inhibitor. The two polypeptide chains have the same chain length and share 62% amino-acid identity. Vipoxin is a unique example of evolution of the catalytic and toxic phospholipase A(2) functions into inhibitory and non-toxic functions. The crystal structure of the complex has been determined by the molecular-replacement method and refined to 1.4 A resolution to an R factor of 18.2%. The complex formation decreases the accessible surface area of the two subunits by approximately 1480 A(2), which results in a reduction of toxicity and catalytic activity. The catalytic and substrate-binding sites of the vipoxin phospholipase A(2) are identical or similar to those of other group I/II enzymes. Two 2-methyl-2,4-pentanediol molecules are present in the hydrophobic channel close to the active site. The two subunits lack calcium ions. The negatively charged Asp49 of the phospholipase A(2), which participates in the Ca(2+)-binding sites of other snake-venom phospholipase A(2)s, is neutralized by the side chain of Lys69 from the inhibitor. Attempts have been made to identify the toxicity region and to explain the reduced catalytic activity and toxicity of the phospholipase A(2) subunit.

Amino Acid Sequence↗

Primary structure, isoforms, and molecular modeling of a chitin-binding mistletoe lectin.

From mistletoe Viscum album L. extracts three chitin-binding lectin isoforms, cbML1, cbML2, and cbML3, were isolated and their primary structure determined. All three cbML isoforms are composed of two protein chains of 48 or 49 amino acid residues, linked by an intermolecular disulfide bond. The sequence of each single cbML chain is characterized by a relatively high number of cysteine and glycine residues, 9 and 6, respectively, and contains four intramolecular disulfide bridges. On the basis of the combined interpretation of sequencing and MALDI MS data, the following results for the three cbML isoforms were obtained: the first one consists of two identical truncated polypeptide chains (1--48), the second is a heterodimer, containing one truncated (1--48) and one full-length chain (1--49), and the third is composed of two full length chains (1--49). The cbML sequence shows 55% identity to hevein, a single-chain chitin-binding protein of 43 amino acids, one of the most predominant proteins in natural rubber latex. On the basis of the NMR data on hevein from Hevea brasiliensis the three-dimensional structure of cbML3 was modelled. The 26 sequence changes between cbML3 and hevein were accommodated with only little perturbation in the main chain folding. A comparison of the primary structures of cbML3 and hevein is shown and the effects of the sequence changes are discussed. Differences have been identified in the loop region of the molecule and the potential interface region of cbML3 supporting the dimer formation. The high-affinity chitin-binding site seems to be highly conserved.

Amino Acid Sequence↗

Structure and function of proteins involved in milk allergies.

Allergy to milk proteins has been defined as any adverse reaction mediated by immunological mechanisms to one or several of proteins found in milk. The milk allergy has been classified according to the onset of symptoms as immediate or delayed type. The milk allergy seems to be manifested by three major proteins found in milk: alpha-lactalbumin, beta-lactoglobulin and caseins. The structural comparison of allergenic sites in alpha-lactalbumin and beta-lactoglobulin with the structure of lactoferrin has clearly shown that yet another major milk protein lactoferrin also possesses allergenic sites and thus may qualify to be an allergen. The heat treatment of milk proteins considerably reduces their allergenicity.

Allergens↗

Differences in the specificities of the highly alkalophilic proteinases Savinase and Esperase imposed by changes in the rigidity and geometry of the substrate binding sites.

Savinase and Esperase are closely related highly alkalophilic proteinases produced by Bacillus lentus. They are suitable couple for investigating the structural basis of proteinase specificity due to the identity of the catalytic and the differences in the substrate binding sites. Two of the substitutions in these sites are very important: T129P and G131P. The two prolines provide an extra rigidity of the Savinase-binding site. The substitutions S166N and Q191T in the S1 recognition loop change the binding geometry of the substrate P1 residue. The geometry of S1 in Esperase is more favorable for binding and catalysis in comparison to that in Savinase. Differences in P3 specificity are probably created by the substitution V104L, which influences the conformation of S3. Leu in position 104 is more favorable for the binding of Phe to S4 than Val. The lower affinity and catalytic efficiency as well as more narrow proteolytic specificity of Savinase in comparison to those of Esperase are explained with the extra rigidity and unfavorable changes in geometry of the substrate binding site of the first enzyme.

Alkalies↗

Structure of a serine protease proteinase K from Tritirachium album limber at 0.98 A resolution.

X-ray diffraction data at atomic resolution to 0.98 A with 136 380 observed unique reflections were collected using a high quality proteinase K crystals grown under microgravity conditions and cryocooled. The structure has been refined anisotropically with REFMAC and SHELX-97 with R-factors of 11.4 and 12.8%, and R(free)-factors of 12.4 and 13.5%, respectively. The refined model coordinates have an overall rms shifts of 0.23 A relative to the same structure determined at room temperature at 1.5 A resolution. Several regions of the main chain and the side chains, which were not observed earlier have been seen more clearly. For example, amino acid 207, which was reported earlier as Ser has been clearly identified as Asp. Furthermore, side-chain disorders of 8 of 279 residues in the polypeptide have been identified. Hydrogen atoms appear as significant peaks in the F(o) - F(c) difference electron density map accounting for an estimated 46% of all hydrogen atoms at 2sigma level. Furthermore, the carbon, nitrogen, and oxygen atoms can be differentiated clearly in the electron density maps. Hydrogen bonds are clearly identified in the serine protease catalytic triad (Ser-His-Asp). Furthermore, electron density is observed for an unusual, short hydrogen bond between aspartic acid and histidine in the catalytic triad. The short hydrogen bond, designated "catalytic hydrogen bond", occurs as part of an elaborate hydrogen bond network, involving Asp of the catalytic triad. Though unusual, these features seem to be conserved in other serine proteases. Finally there are clear electron density peaks for the hydrogen atoms associated with the Ogamma of Ser 224 and Ndelta1 of His 69.

Ascomycota↗

Substrate specificity of the highly alkalophilic bacterial proteinase esperase: relation to the x-ray structure.

Esperase is a highly alkalophilic bacterial proteinase produced by Bacillus lentus. The enzyme hydrolyzes peptide bonds comprising the carboxylic groups of hydrophobic as well as hydrophilic residues in the oxidized insulin B chain. Some of these bonds are not attacked by other alkaline microbial proteinases. P1-P4 specificity was determined by a series of peptide nitroanilides. The S1 recognition loop exhibits a preference for Phe. The "cleft" of the smallest subsite S2 prefers Ala and exhibits low affinity for the larger chain of Leu. S3 is more open than the other subsites and can accept a variety of residues. Hydrophobic interactions predominate in the S4-P4 interactions because S4 can accommodate Phe very well. The results characterize Esperase as an endopeptidase with a broader specificity in comparison with other microbial serine proteinases. This is probably owing to a more flexible substrate binding site.

Anilides↗

Structural changes of tRNA and 5S rRNA induced with magnesium and visualized with synchrotron mediated hydroxyl radical cleavage.

The structure of native yeast tRNA(Phe) and wheat germ ribosomal 5S RNA induced by different magnesium ion concentrations was studied in solution with a synchrotron mediated hydroxyl radical RNA cleavage reaction. We showed that very small amounts of Mg+2 can induce significant changes in the hydroxyl radical cleavage pattern of tRNA(Phe). It also turned out that a reactivity of tRNAz(Phe) towards *OH coincides with the strong metal binding sites. Because of the Mg ions are heavily hydrated one can suggest the strong correlation of the observed nucleosides reactivity in vicinity of Mg2+ binding sites with availability of water molecules as a source of hydroxyl radical. On the other hand the structure of wheat germ 5S rRNA is less sensitive to the hydroxyl radical reaction than tRNA(Phe) although some changes are visible at 4 mM Mg ions. It is probably due to the lack of strong Mg+2 binding sites in that molecule. The reactivity of nucleotides in loops C and D of 5S rRNA is not effected, what suggests their flexibility or involvement in higher order structure formation. There is different effect of magnesium on tRNA and 5S rRNA folding. We found that nucleotides forming strong binding sites for magnesium are very sensitive to X-ray generated hydroxyl radical and can be mapped with *OH. The results show, that guanine nucleotides are preferentially hydrated. X-ray footprinting mediated hydroxyl radical RNA cleavage is a very powerful method and has been applied to studies of stable RNAs for the first time.

Base Sequence↗

Enhancement of enzyme activity through three-phase partitioning: crystal structure of a modified serine proteinase at 1.5 A resolution.

Three-phase partitioning is fast developing as a novel bioseparation strategy with a wide range of applications including enzyme stability and enhancement of its catalytic activity. Despite all this, the enzyme behaviour in this process still remains unknown. A serine proteinase, proteinase K, was subjected to three-phase partitioning (TPP). A 3 ml volume of proteinase K solution (3 mg/ml in 0.05 M acetate buffer, pH 6.0) was brought to 30% (w/v) ammonium sulphate saturation by addition of saturated ammonium sulphate. tert-Butanol (6 ml) was added to this solution and the mixture was incubated at 25 degrees C for 1 h. The precipitated protein in the mid-layer was dissolved in 3 ml of 0.05 M acetate buffer, pH 6.0. The specific activity of the processed enzyme was estimated and was found to be 210% of the original enzyme activity. In order to understand the basis of this remarkable enhancement of the enzyme activity, the structure of the TPP-treated enzyme was determined by X-ray diffraction at 1.5 A resolution. The overall structure of the TPP-treated enzyme is similar to the original structure in an aqueous environment. The hydrogen bonding system of the catalytic triad is intact. However, the water structure in the substrate binding site has undergone a rearrangement as some of the water molecules are either displaced or completely absent. Two acetate ions were identified in the structure. One is located in the active site and seems to mimic the role of water in the enzyme activity and stability. The other is located at the surface of the molecule and is involved in stabilizing the local structure of the enzyme. The most striking observation in respect of the present structure pertains to a relatively higher overall temperature factor (B = 19.7 A(2)) than the value of 9.3 A(2) in the original enzyme. As a result of a higher B-factor, a number of residues, particularly their side chains, were found to adopt more than one conformation. It appears that the protein exists in an excited state which might be helping the enzyme to function more rapidly than the original enzyme in aqueous media. Summarily, the basis of increased enzymatic activity could be attributed to (i) the presence of an acetate ion at the active site and (ii) its excited state as reflected by an overall higher B-factor.

Crystallography, X-Ray↗

Structure of an RNA duplex with an unusual G.C pair in wobble-like conformation at 1.6 A resolution.

The structure of the RNA duplex r(CUGGGCGG).r(CCGCCUGG) has been determined at 1.6 A resolution and refined to a final R factor of 18.3% (R(free) = 24.1%). The sequence of the RNA fragment resembles domain E of Thermus flavus 5S rRNA. A previously undescribed wobble-like G.C base-pair formation is found. Owing to the observed hydrogen-bond network, it is proposed that the cytosine is protonated at position N3. The unusual base-pair formation is presumably strained by intermolecular interactions. In this context, crystal packing and particular intermolecular contacts may have direct influence on the three-dimensional structure. Furthermore, this structure includes two G.U wobble base pairs in tandem conformation, with the purines forming a so-called 'cross-strand G stack'.

Base Pairing↗

Structural studies on the cobra venom factor: isolation, purification, crystallization and preliminary crystallographic analysis.

Cobra venom factor (CVF) is the complement-activating protein in cobra venom. It is a three-chain glycoprotein with a molecular weight of 149,000 Da. In serum, CVF forms a bimolecular enzyme with the Bb subunit of factor B. The enzyme cleaves C3 and C5, causing complement consumption in human and mammalian serum. CVF is frequently used to decomplement serum to investigate the biological functions of complement and serves as a tool to investigate the multifunctionality of C3. Furthermore, CVF bears the potential for clinical application to deplete complement in situations where complement activation is involved in the pathogenesis of disease. CVF was isolated from Indian cobra (Naja naja naja) venom. The protein was crystallized at room temperature using the sitting-drop vapour-diffusion technique. The crystals diffract to 2.7 A resolution and belong to the tetragonal space group P4(1), with unit-cell parameters a = b = 62.7, c = 368.1 A.

Animals↗