PubMed Health⌕ Search

Biomedical subjects

C Boulenguez

Publications and source records attributed to C Boulenguez.

At least 19 recordsLinked to original sources
PubMed2005

Gender and regional differences in perceived job stress across Europe.

BACKGROUND: Over the last 20 years stress at work has been found to be predictive of several conditions such as coronary heart disease, high blood pressure and non-specific sick leave. The Karasek demand/control/strain concept has been the most widely used in prospective epidemiological studies. OBJECTIVES: To describe distribution in Karasek's demand/control (DC) dimensions as well as prevalence of strain in samples from different parts of Europe grouped into three regions (South, Middle, Sweden), adjusting for occupation. To describe gender differences in Karasek's DC dimensions along with strain prevalence and assess the regional stability of those differences in different occupational groups. DESIGN: The Job stress, Absenteeism and Coronary heart disease in Europe (JACE) study, a Concerted Action (Biomed I) of the European Union, is a multicentre prospective cohort epidemiological study: 38,019 subjects at work aged 35-59 years were surveyed at baseline. Standardised techniques were used for occupation coding (International Standardised Classification of Occupations) and for the DC model (Karasek scale): five items for the psychological demand and nine items for the control or decision latitude dimensions, respectively. RESULTS: A total of 34,972 subjects had a complete data set. There were important regional differences in the Karasek scales and in prevalence of strain even after adjustment for occupational class. Mean demand and control were higher in the Swedish centres when compared to two centres in Milano and Barcelona (Southern region) and values observed in four centres (Ghent, Brussels, Lille and Hoofddorp) in Middle Europe were closer to those observed in the Southern cities than to those obtained in the Swedish cities. Clerks (ISCO 4) and, more specifically, office clerks (ISCO 41) exhibited the smallest regional variation. In a multivariate model, the factor 'region' explained a small fraction of total variance. In the two Southern centres as well as in the four Middle European centres, men perceived marginally less job-demand as compared to women whereas the reverse was observed in the two Swedish centres. Differences were larger for control: men appeared to perceive more control at work than did women. In a multivariate model, gender explained a small fraction whereas occupational level explained a large fraction of the variance. CONCLUSIONS: In this standardised multicentre European study Karasek's DC model showed large gender and occupational differences whereas geographic region explained a small fraction of the total DC variance, notwithstanding large differences in labour market and working conditions as pointed out by the European Commission as recently as 2000.

Adult↗
PubMed2001

Thin-section CT finding in 250 volunteers: assessment of the relationship of CT findings with smoking history and pulmonary function test results.

PURPOSE: To evaluate the frequency and morphologic characteristics of air trapping in volunteers with various smoking habits. MATERIALS AND METHODS: Two hundred fifty volunteers (133 women, 117 men; mean age, 39 years), including 144 smokers, 47 ex-smokers, and 59 nonsmokers, prospectively underwent inspiratory and expiratory high-spatial-resolution computed tomography (CT) and pulmonary function tests (PFTs). The frequency and characteristics of air trapping were evaluated according to the population's smoking habits and PFT results. RESULTS: The overall frequency of air trapping was 62% (155 of 250 subjects). Lobular air trapping was depicted in 117 (47%) of 250 subjects, without significant differences among smokers (n = 91), ex-smokers (n = 33), and nonsmokers (n = 31) (P =.118). Segmental and lobar air trapping (38 [15%] of 250) were more frequent among smokers (24 [26%] of 91) and ex-smokers (nine [27%] of 33) (P <.001). No relationship was found between air trapping and functional indexes of small-airway disease when the CT pattern of air trapping was considered. The strongest relationship between CT abnormalities and functional alterations at the small-airways level was between inspiratory CT features of bronchiolitis: ground-glass opacity, ill-defined micronodules, bronchiolectasis, and air flow at low lung volumes. CONCLUSION: Whereas a significant relationship was observed between segmental and lobar air trapping and cigarette consumption, lobular air trapping was not found to reflect functional impairment at the small-airways level.

Adult↗
PubMed2000

Acute respiratory effects of exposure to stainless steel and mild steel welding fumes.

Over the past few years, many studies, including one on our previous work, have examined the chronic effects of fumes from stainless steel (SS) welding on the health of welders. These chronic effects have been related to concentrations of chromium and nickel in SS welding fumes. The present study examined the acute respiratory effects of welding fumes in the workplace by measuring the across-shift changes in a population of 144 SS and mild steel (MS) welders and 223 controls. Manual Metal Arc, Metal Inert Gas, and Tungsten Inert Gas welding processes were studied. Pulmonary function tests were performed at the start (ante, or A) and at the end (post, or P) of the work shift. The study of sensitization to harmful respiratory effects of welding was based on the study of the (P-A)/A ratio (%) of the spirometric variations during the shift. The means of these ratios in the control subjects were used to account for the circadian effect. In SS welders we observed a significant decrease in forced vital capacity (FVC) during the shift. Significant across-shift decrements in forced expiratory volume in 1 second (FEV1) and FVC were related to the SS welding exposure compared with MS welding. Moreover, the across-shift decreases in FEV1, FVC, and peak expiratory flow (PEF) were significantly related to the Manual Metal Arc welding process, compared with Metal Inert Gas techniques (respectively, PEF = -2.7% of baseline values [SD, 11.9] vs 2.0% of baseline values [SD, 7.7] P = 0.04; FVC = -1.5% of baseline values [SD, 4.8] vs 0.2% of baseline values [SD, 4.5] P = 0.05). We also demonstrated the influence of duration of SS welding exposure on the course of lung function during the work shift. After 20 years of SS welding activity, SS welders had more significant across-shift decreases than MS welders with a similar MS exposure duration (respectively, FEV1 = -2.7% of baseline values [SD, 5.9] vs 0.7% of baseline values [SD, 4.2] P = 0.008; PEF = -3.8% of baseline values [SD, 9.6] vs 2.3% of baseline values [SD, 6.5] P = 0.04). We concluded that welding-related lung function responses are seen in SS compared with MS welders and in those with a longer lifetime welding history.

Adult↗
PubMed1998

Respiratory symptoms and pulmonary function among stainless steel welders.

In the last few years, many studies have been carried out concerning the effects of fumes from stainless steel (SS) welding on the health of welders. The respiratory effects of exposure to SS welding fumes have already been studied, but the results of lung function investigations have not been consistent. However, the main factor of risk for the welders' health seems to be related to the great concentration of chromium and nickel contained in fumes coming from SS welding. The aim of this study was to detect the chronic effects of SS welding exposure on pulmonary symptoms and ventilatory function tests. Respiratory symptoms and lung function tests were studied in 134 SS welders and 252 controls (C). Welders and controls were of similar average age, height, and duration in employment. The smoking habits of the groups were also similar. The medical questionnaire on respiratory symptoms was a version of the Medical Research Council questionnaire, modified by the British Occupational Hygiene Society. The flow-volume curves were performed with a calibrated pneumotachograph spirometer before each subject started working. After adjustment for tobacco habits, the SS welders presented a higher prevalence of bronchial irritative symptoms such as cough (P = 0.01) or sputum production (P = 0.02) than the controls. On the other hand, chronic bronchitis appeared to be significantly linked to tobacco consumption. The pulmonary function analysis underscored no significant difference between stainless steel welders and controls (forced expiratory volume in one second, observed/predicted: SS = 0.99 vs C = 0.98; maximal midexpiratory flow, observed/predicted: SS = 0.90 vs C = 0.92; maximal expiratory flow at 50 % of the forced vital capacity, observed/predicted: SS = 0.95 vs C = 0.95). On the other hand, by the mean of the two-ways analysis, a significant tobacco effect was found, without exposure or interaction of tobacco-exposure effects. There was no influence of the specific welding processes on the spirographic parameters, but a decrease in spirographic values after 25 years of welding activity was evident. The results of multiple regression indicated that age was not a confounding factor.

Adult↗
PubMed1997

Assessment of biological chromium among stainless steel and mild steel welders in relation to welding processes.

Air and biological monitoring were used for assessing external and internal chromium exposure among 116 stainless steel welders (SS welders) using manual metal arc (MMA), metal inert gas (MIG) and tungsten inert gas (TIG) welding processes (MMA: n = 57; MIG: n = 37; TIG: n = 22) and 30 mild steel welders (MS welders) using MMA and MIG welding processes (MMA: n = 14; MIG: n = 16). The levels of atmospheric total chromium were evaluated after personal air monitoring. The mean values for the different groups of SS welders were 201 micrograms/m3 (MMA) and 185 micrograms/m3 (MIG), 52 micrograms/m3 (TIG) and for MS welders 8.1 micrograms/m3 (MMA) and 7.3 micrograms/m3 (MIG). The curve of cumulative frequency distribution from biological monitoring among SS welders showed chromium geometric mean concentrations in whole blood of 3.6 micrograms/l (95th percentile = 19.9), in plasma of 3.3 micrograms/l (95th percentile = 21.0) and in urine samples of 6.2 micrograms/l (95th percentile = 58.0). Among MS welders, mean values in whole blood and plasma were rather more scattered (1.8 micrograms/l, 95th percentile = 9.3 and 1.3 micrograms/l, 95th percentile = 8.4, respectively) and in urine the value was 2.4 micrograms/l (95th percentile = 13.3). The analysis of variance of chromium concentrations in plasma previously showed a metal effect (F = 29.7, P < 0.001), a process effect (F = 22.2, P < 0.0001) but no metal-process interaction (F = 1.3, P = 0.25). Concerning urinary chromium concentration, the analysis of variance also showed a metal effect (F = 30, P < 0.0001), a process effect (F = 72, P < 0.0001) as well as a metal-process interaction (F = 13.2, P = 0.0004). Throughout the study we noted any significant differences between smokers and non-smokers among welders. Taking in account the relationships between chromium concentrations in whole, plasma or urine and the different welding process. MMA-SS is definitely different from other processes because the biological values are clearly higher. These higher levels are due to the very significant concentrations of total soluble chromium, mainly hexavalent chromium, in welding fumes.

Adult↗
PubMed1993

Circadian variation of diet-induced thermogenesis.

The objective of this study was to assess a circadian variation of diet-induced thermogenesis (DIT) that could favor weight gain among night workers used to eating a night time snack. Nine young men were given the same mean at 0900, 1700, or 0100. Energy expenditure was measured by indirect calorimetry 1 h before and during the 6 h after the snack. DIT was calculated as the 3 h of energy expenditure above basal metabolic rate. Morning DIT was significantly higher than afternoon DIT (P = 0.04) and night DIT (P = 0.002). Afternoon DIT was higher than night DIT (P = 0.06). We conclude that the time when a meal is consumed affects the thermogenic response and must be considered in the energy balance.

Adult↗
PubMed1993

Bronchial symptoms and respiratory function in workers exposed to methylmethacrylate.

This study aimed to investigate the pulmonary effects of methylmethacrylate (MMA) in a group of occupationally exposed workers. In the exposed group 20% had chronic cough compared with 1% in controls. Spirometric values at the beginning of the workshift were similar in both groups, but a mild airways obstruction appeared during the workshift. The maximum expiratory flow when 50% of the forced vital capacity remained to be exhaled (MEF50) and the ratio of MEF50 to maximal expiratory flow (MEF50/MEF) decreased significantly during the workshift among exposed workers v controls (p = 0.04 and 0.01 respectively). Results remained unaffected after adjustment for smoking. Exposure to MMA seems to be responsible for a mild airways obstruction but further study on a larger population would be useful.

Adult↗
PubMed1993

Morphologic effects of cigarette smoking on airways and pulmonary parenchyma in healthy adult volunteers: CT evaluation and correlation with pulmonary function tests.

A prospective computed tomographic (CT) study was performed to determine the prevalence of lung changes in smokers. The study group comprised 175 healthy adult volunteers (current smokers, n = 98; ex-smokers, n = 26; nonsmokers, n = 51). The subjects underwent clinical examination, pulmonary function tests, chest radiography, and conventional and high-resolution CT (HRCT). Significant differences between current smokers, ex-smokers, and nonsmokers were observed with HRCT in the identification of subpleural (P = .11) and parenchymal (P < .001) micronodules, emphysema (P < .001), and areas of ground-glass attenuation (P = .0001). All subjects had normal pulmonary function. Parenchymal micronodules, areas of ground-glass attenuation, and emphysema were observed with a significant predominance in the upper lung zones (P < .01). Presence of emphysema and abnormal bronchial wall thickening were the only HRCT signs associated with significantly lower values of functional parameters. These data support the concept that parenchymal abnormalities can be detected in healthy smokers with normal findings at chest radiography and pulmonary function tests.

Adult↗
PubMed1977

[Determination of global diffusion of CO2 and its partial components under assisted respiration. Technical problems and practical value in respiratory resuscitation].

A study of partial CO2 ductance has been performed in patients under assisted ventilation. The authors propose methods for simultaneous measurement of paCO2, PAECO2, PECO2 and PICO2. This methodology is used in patients presenting different conditions accounting for respiratory resuscitation: barbiturate poisoning with healthy lungs, bronchial stasis, acute lung involvement, obstructive bronchopneumopathy and pulmonary embolism.

Carbon Dioxide↗