[Biochemistry and therapy of ketosis].
Explore the source record for details and available documents.
Biomedical subjects
Publications and source records attributed to C C Kuenzle.
Explore the source record for details and available documents.
A label for the bilirubin binding sites of human serum albumin was synthesized by reacting 2 mol of Woodward's reagent K (N-ethyl-5-phenylisoxazolium-3'-sulfonate) with 1 mol of bilirubin. This yielded a water-soluble derivative in which both carboxyl groups of bilirubin were converted to reactive enol esters. Covalent labeling was achieved by reacting the label with human serum albumin under nitrogen at pH 9.4 and 20 degrees. Under the same conditions, no covalent binding to the monomers of several proteins could be demonstrated. The number of binding sites for bilirubin and the label were found to be the same, and competition experiments with bilirubin showed inhibition of covalent labeling. The absorption, fluorescence and CD spectra of the label in a complex with human serum albumin were similar to those of the bilirubin human serum albumin complex. However, following covalent attachment to the spectral properties were changed, indicating loss of conformational freedom of the chromophore. Labeling ratios were selected to result in the incorporation of less than 1 mol of label/mol of human serum albumin. Under these conditions, labeling is thought to occur primarily at the high affinity binding site.
Explore the source record for details and available documents.
An alkali-stable bilirubin conjugate has been obtained from human T-tube bile as its phenylazo derivative. The conjugate consists of a polypeptide probably of molecular weight 7000 to which the azo pigment of bilirubin is linked covalently through its carboxyl group. It thus constitutes the first biliprotein found in mammals. It is not known whether both carboxyl groups of native bilirubin participate in the binding of the conjugating protein, nor has it been possible to determine the number of pigment moieties occurring on a single polypeptide chain. The isolation makes use of the tendency of the conjugate to form large aggregates and involves the following steps: azo coupling of the native bile, (NH4)2S04 precipitation of macromolecules and aggregates, removal of low molecular weight contaminants by dialysis and gel filtration (first on Sepharose 6B IN 6 M guanidine, then on Sephadex LH-20 in 50% acqueous 2-chloroethanol) and a concluding purification by chromatography on p-aminobenzyl cellulose using a PH gradient. The final preparation appeared to be homogeneous on polyacrylamide electrophoresis.
Explore the source record for details and available documents.
The DNA analysis of rat brain nuclei by two independent cytochemical methods, namely microfluorometry and UV-absorption, brings completely different results to those published previously by many investigators. The neuronal nuclei possess twice as much DNA as the glial nuclei.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Dimethoxybilirubin dimethyl ester and monomethoxybilirubin dimethyl ester were prepared by treating bilirubin with diazomethane, and the correctness of the assigned structures was proved by elemental analysis as well as by i.r. and n.m.r. spectroscopy. The phenylazo compounds derived from monomethoxybilirubin dimethyl ester were also prepared and characterized spectroscopically. Dimethoxybilirubin dimethyl ester occurs in solution as a single molecular species, unlike bilirubin dimethyl ester, which in non-polar solvents exists as an equilibrium mixture of conformational isomers. This difference in the behaviour of the two compounds is explained by the absence of intramolecular hydrogen bonds in dimethoxybilirubin dimethyl ester, a situation that allows free rotation about the central methylene bridge, whereas in bilirubin dimethyl ester an internally hydrogen-bonded conformation can be distinguished by n.m.r. spectroscopy from a non-bonded family of rotamers. This finding is regarded as additional evidence for a newly conceived conformational structure of bilirubin and bilirubin dimethyl ester that is maximally stabilized by intramolecular hydrogen bonds. This is discussed in detail in the Appendix (Kuenzle et al., 1973), which also includes a description of the molecular mechanism pertaining to the reaction of bilirubin with diazomethane.
A novel conformational structure of bilirubin is presented which obtains maximum stabilization through a system of four intramolecular hydrogen bonds. Two hydrogen bonds link oxygen and nitrogen atoms of each end ring to the contralateral carboxyl group. The proposed structure can explain a variety of uncommon features of bilirubin, and reconciles many seemingly contradictory hypotheses by accommodating them in individual structures which are mesomeric forms of one resonance hybrid. In the light of this newly conceived structure the following characteristics of bilirubin are re-evaluated: the stability of the compound, its reaction with diazomethane, the conformational behaviour of its dimethyl ester, its spectral properties, the chirality of the compound when complexed to serum albumin, and the structure of its metal chelates.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
A method is presented that allows the isolation of eight different phenylazo derivatives of bile bilirubin. In step I of the isolation procedure, three bilirubin fractions (bilirubin fractions 1, 2 and 3) from human hepatic bile are separated by reverse-phase partition chromatography on silicone-treated Celite with the use of a solvent system prepared from butan-1-ol and 5mm-phosphate buffer, pH6.0. Azo coupling is then performed with diazotized aniline. The three azo pigment mixtures are subjected to step II, in which the above chromatography system is used again. With each azo pigment mixture this step brings about the separation of a non-polar and a polar azo pigment fraction (azo 1A and azo 1B, azo 2A and azo 2B, and azo 3A and azo 3B from bilirubin fractions 1, 2 and 3 respectively). Approximately equal amounts of non-polar and polar pigments are obtained from bilirubin fractions 1 and 2, whereas bilirubin fraction 3 yields azo 3B almost exclusively. In step IIIA the non-polar azo pigment fractions are fractionated further by adsorption chromatography on anhydrous sodium sulphate with the use of chloroform followed by a gradient of ethyl acetate in chloroform. Three azo pigments are thus obtained from both azo 2A (azo 2A(1), azo 2A(2) and azo 2A(3)) and azo 3A (azo 3A(1), azo 3A(2) and azo 3A(3)). The 2A pigments occur in approximately the following proportions: azo 2A(1), 90%; azo 2A(2), 10%; azo 2A(3), traces. The pigments are purified by crystallization, except for the A(3) pigments, which are probably degradation products arising from the corresponding A(2) pigments. In step IIIB the polar azo pigment fractions are subjected to reverse-phase partition chromatography on silicone-treated Celite with the use of a solvent system prepared from octan-1-ol-di-isopropyl ether-ethyl acetate-methanol-0.2m-acetic acid (1:2:2:3:4, by vol.). Azo pigment fractions 2B and 3B each yield six azo pigments (azo 2B(1) to azo 2B(6) and azo 3B(1) to azo 3B(6) respectively) together with small amounts of products of hydrolysis (azo 2A(B) and azo 3A(B)). Only one azo B pigment is obtained from bilirubin fraction 1, and this azo pigment is probably of the B(2) type. The yields of the azo 3B pigments suggest that these pigments are present in approximately the following proportions: azo 3B(1), 0-0.4%; azo 3B(2), traces; azo 3B(3), traces; azo 3B(4), 10%; azo 3B(5), 50%; azo 3B(6), 40%. Azo pigments 2B(1) to 2B(6) are estimated to occur in similar proportions. Since pairs of correspondingly numbered azo pigments from bilirubin fractions 1, 2 and 3 do not separate on rechromatography together (e.g. azo 2A(1) co-chromatographs with azo 3A(1), and azo 2B(6) co-chromatographs with azo 3B(6)), it is concluded that such pigments are chemically identical. The structures of the isolated phenylazo derivatives are discussed in an accompanying paper (Kuenzle 1970c).
N.m.r., i.r. and optical spectra of model compounds were recorded. These were to help in elucidating the structures of the phenylazo derivatives of bilirubin conjugates isolated from human bile. Model compounds included commercial and human bile bilirubin, mesobilirubin, bilirubin dimethyl ester, dimethoxybilirubin dimethyl ester and the corresponding phenylazo derivatives. The phenylazo derivative of vinylneoxanthobilirubinic acid was also investigated. All compounds were of the type IXalpha, and no other isomer could be detected with the spectroscopic methods employed. The compounds crystallize as the lactams, except for dimethoxybilirubin dimethyl ester and its phenylazo derivative, which are held in the lactim ether configuration. With all other compounds no tautomeric forms other than the lactams could be detected, although small proportions of bilirubin must exist as the lactim. Bilirubin does not form a betaine, a structure that has been proposed by von Dobeneck & Brunner (1965) to explain the bathochromic shift of its optical spectrum as compared with the expected position of the absorption maximum at 420nm. However, this shift to 453nm can be explained on the basis of internal hydrogen bonds occurring between the carboxylic protons and the pyrrole rings of bilirubin, as proposed by Fog & Jellum (1963), and new evidence for such a bonding has been accumulated. The bilirubin sulphate described by Watson (1958), which is formed by treatment of bilirubin with concentrated sulphuric acid and acetic anhydride, was also investigated. The main product of this reaction was isolated as its phenylazo derivative, and was shown to be 3,18-di(ethylidene sulphate)-2,7,13,17-tetramethylbiladiene-ac-8,12-dipropionic acid. The reaction leading to this compound is an addition of sulphuric acid to the vinyl side chains of bilirubin according to Markownikoff's rule.