PubMed Health⌕ Search

Biomedical subjects

C Cassinelli

Publications and source records attributed to C Cassinelli.

At least 19 recordsLinked to original sources

Collagen I-coated titanium surfaces: mesenchymal cell adhesion and in vivo evaluation in trabecular bone implants.

The goal of the study was the evaluation of the effect of modification of titanium implants by acrylic acid surface grafting-collagen I coupling. Tests were performed on titanium samples treated by galvanostatic anodization to create a porous surface topography. Surface characterization by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) confirms the biochemical modification of the surface and shows a surface topography characterized by pores mostly below 1 mum diameter. In vitro evaluation involving human mesenchymal cells shows enhanced cell growth on collagen coated surfaces as compared to titanium ones. Four weeks in vivo evaluation of implants in rabbit femur trabecular bone shows improvements of bone-to-implant contact, while improvement of bone ingrowth is slightly not significant (p = 0.056), when compared to the control. Overall, these data indicate that integration in trabecular, or cancellous, bone can be enhanced by the surface collagen layer, confirming previous findings obtained by modification of machined surfaces by the same approach in cortical bone implants.

Animals↗

Effects of molecular weight and surface functionalization on surface composition and cell adhesion to Hyaluronan coated titanium.

This paper describes the effect of surface functionalization on surface composition and cell adhesion to titanium samples by high and low molecular weight Hyaluronan (HA). HA was covalently linked to aminated Ti surfaces obtained by two different surface functionalization techniques, that is polyethyleneimine (PEI) adsorption and deposition from allylamine plasma. The two approaches yield very different surface densities of available amino groups, affecting this way the number and frequency of surface-HA bonds and the configurational freedom of the latter. Results of cell adhesion test are dependent on the surface functionalization approach adopted, low molecular weight HA coupled to PEI functionalized Ti does not yield the same degree of resistance to cell adhesion found on other samples. These results indicate that the details of the surface functionalization step are crucial for surface engineering of implant devices by biological molecules.

Allylamine↗

Biomaterials surface characterization and modification.

This paper presents several examples of recent work in the field of surface modification and characterization of biomaterials. Due to the explosion of techniques and approaches in this area, a complete review would be unmanageable in a single paper. Rather selected examples taken from such different areas as bone-contacting devices, drug eluting stents, and immobilization of novel biomolecules are presented. The aim is to place the existing and quickly developing background of analytical and synthetic biomaterial surface science into the current perspective of this rapidly evolving discipline.

Artificial Organs↗

Physical-chemical and biological characterization of silk fibroin-coated porous membranes for medical applications.

Membranes in artificial organs and scaffolds for tissue engineering are often coated with biomimetic molecules (e.g., collagen) to improve their biocompatibility and promote primary cell adhesion and differentiation. However, animal proteins are expensive and may be contaminated with prions. Silk fibroin (SF) made by Bombyx Mori silk worms, used as a scaffold or grafted to other polymers, reportedly promotes the adhesion and growth of many human cell types. This paper describes how commercial porous membranes were physically coated with SF, and their physical-chemical properties were characterized by SEM, AFM, tensile stress analysis and dynamic contact angle measurements. The effect of the SF coating on membrane biocompatibility and resistance to bacterial colonization is also examined. The proposed technique yields SF coats of different thickness that strengthen the membranes and make their surface remarkably more wettable. The SF coat is not cytotoxic, and promotes the adhesion and proliferation of an immortalized fibroblast cell line. Similarly to collagen, SF-coated membranes also exhibit a much better resistance to the adhesion of S. epidermidis bacteria than uncoated membranes. These preliminary results suggest that SF is a feasible alternative to collagen as a biomimetic coating for 3D scaffolds for tissue engineering or bioartificial (as well as artificial) prosthesis.

Chemical Phenomena↗

Sister chromatid exchange and oxidative DNA damage in paving workers exposed to PAHs.

Paving workers are exposed during road paving to several polycyclic aromatic hydrocarbons (PAHs) contained in asphalt fumes. In this study early genotoxic and oxidative effects of exposure to bitumen fumes were evaluated in 19 paving workers and 22 controls. Environmental and biological monitoring of exposure was carried out, measuring, on personal air samples from exposed workers collected during three working days, the concentration of 14 PAHs and urinary OH-pyrene at the end of each of the three working days. Genotoxic effect was evaluated analysing sister chromatid exchange (SCE) frequency and direct-oxidative DNA damage by formamido-pyrimidine-glycosylase (Fpg)-modified comet assay on lymphocytes. Tail moment values from Fpg-enzyme treated cells (TMenz) and from untreated cells (TM) were used as parameters of direct and oxidative DNA damage, respectively. For each subject, the TMenz/TM ratio >2.0 was used to indicate the presence of oxidative damage. DNA damage was also evaluated analysing comet percentage. Personal air samples showed low level of total PAHs (2.843 microg m(-3)) with prevalence of 2-3 ring PAHs (2.693 microg m(-3)). Urinary OH-pyrene after work-shift of the three working days was significantly higher than that found at the beginning of the working week. SCE analysis did not show any difference between two groups while an oxidative DNA damage was found in 37% of exposed with respect to the absence in controls. Comet percentage was significantly higher (P = 0.000 ANOVA) in the exposed than in controls. The results demonstrate the high sensitivity of comet assay to assess early oxidative effects induced by exposure to bitumen fumes at low doses and confirm the suitability of urinary OH-pyrene as a biomarker of PAH exposure. In conclusion the study suggests the use of Fpg-modified comet test as a biomarker of early genotoxic effects and that of urinary OH-pyrene as a biomarker of PAH exposure to furnish indications in terms of characterization, prevention and management of risk in occupational exposure to mixtures of potentially carcinogenic substances.

Adult↗

New polymers for drug delivery systems in orthopaedics: in vivo biocompatibility evaluation.

The use of biodegradable polymers for drug delivery systems excluded the need for a second operation to remove the carrier. However, the development of an avascular fibrous capsule, reducing drug release, has raised concern about these polymers in terms of tissue-implant reaction. Five novel polymers were evaluated in vivo after implantation in the rat dorsal subcutis and compared to the reference polycaprolactone (PCL). Poly(cyclohexyl-sebacate) (PCS), poly(L-lactide-b-1,5-dioxepan-2-one-b-L-lactide) (PLLA-PDXO-PLLA), two 3-hydroxybutyrate-co-3-hydroxyvalerate copolymers (D400G and D600G), and a poly(organo)phosphazene (POS-PheOEt:Imidazole) specimens were histologically evaluated in terms of the inflammatory tissue thickness and vascular density at 4 and 12 weeks from surgery. The highest values of inflammatory tissue thickness were observed in D600G (P < 0.01), PCS (P < 0.001) and PLLA-PDXO-PLLA (P < 0.001) at 4 weeks, while POP-PheOEt:Imidazole showed the lowest value of inflammatory tissue thickness (P < 0.05) at 12 weeks. D400G, D600G, PLLA-PDXO-PPLA and POP-PheOEt:Imidazole showed higher (P < 0.001) values of vascular density near the implants in comparison to PCL at 4 weeks. Finally, D400G and D600G increased their vessel densities while POP-PheOEt:Imidazole and the synthetic polyester PLLA-PDXO-PLLA presented similar vessel density values during experimental times. These different behaviours to improve neoangiogenesis without severe inflammatory tissue-responses could be further investigated with drugs in order to obtain time-programmable drug delivery systems for musculoskeletal therapy.

Animals↗

Adsorption of cationic antibacterial on collagen-coated titanium implant devices.

Two different cationic antimicrobial molecules, chlorhexidine (CH) and poly(hexamethylenebiguanide) (PH), were adsorbed from aqueous solution to titanium implant devices surface-modified by the covalent coupling of collagen on a polyanionic acrylic acid overlayer. Results show that more antimicrobial was adsorbed on surface modified implants as compared to control titanium devices. Moreover, the kinetic of release was affected by the interaction between the polyanionic overlayer and the cationic antimicrobial, leading to slower kinetic of release in the case of CH and stable adsorption in the case of polycationic PH . These data indicate that biochemically modified collagen coated surfaces could be endowed also by antimicrobial properties, in the spirit of present researches on multifunctional implant surfaces.

Adsorption↗

Surface engineering of titanium by collagen immobilization. Surface characterization and in vitro and in vivo studies.

Collagen was covalently linked to the surface of Titanium (Ti) by a surface modification process involving deposition of a thin film from hydrocarbon plasma followed by acrylic acid grafting. The composition and properties of surface-modified Ti were investigated by a number of surface sensitive techniques: XPS, ATR-IR, atomic force microscopy and AFM force-separation curves. In vitro tests were performed to check samples cytotoxicity and the behavior of osteoblast-like SaOS-2 cells. In vivo experiments involved 12 weeks implants in rabbit muscle as general biocompatibility assessment and 1-month implants in rabbit bone to evaluate the effect of surface modification on osteointegration rate. Results of XPS measurements show how surface chemistry is affected throughout each step of the surface modification process, finally leading to a complete and homogeneous collagen overlayer on top of the Ti samples. AFM data clearly display the modification of the surface topography and of the surface area of the samples as a consequence of the grafting and coupling process. AFM force-distance curves show that the interfacial structure responds by shrinking or swelling to variations of ionic force of the surrounding aqueous environment, suggesting that the aqueous interface of the biochemically modified Ti samples has enhanced degrees of freedom as compared to the inorganic surface of plain Ti. As to biological evaluations, the biochemically modified Ti samples are safe in terms of cytotoxicity and in vivo biocompatibility assessment. SaOS-2 cells growth rate is lower on collagen modified surfaces, and no significant difference is detected in terms of alkaline phosphatase production as compared to control Ti. Importantly, implants in rabbit femur show a significant increase of bone growth and bone-to-implant contact in the case of the collagen modified samples, confirming that biochemical modifications of Ti surface can enhance the rate of bone healing as compared to plain Ti.

Adsorption↗

[Corrosion of titanium in presence of dental amalgams and fluorides].

AIM: The aim of this study was to evaluate the behaviour of titanium (Ti) in precipitant condition, and more precisely the resistance against corrosion of Ti in presence of fluorides and the electrochemical interaction between Ti- amalgam couples in fluorinated solution. METHODS: The experimental test was made with the use of an electrochemical cell. The following materials were tested: commercially pure Ti and 2 types of amalgams, the Persistalloy (Prs) and the IQC. Palladium (IQC.P). The free corrosion potential of Ti and the amalgams, the polarization curves of both amalgams and the corrosion current of the Ti-amalgam couples in the measurements were performed in 3 different electrolytic solutions: Ringer solution, fluorinated neutral Ringer solution and acid fluorinated solution. The three corrosive media are described. RESULTS: The results showed that Ti could be damaged by the presence of fluorides with an acid pH: Ti potential becomes more negative in acid fluorinated solution. The corrosion currents between Ti and amalgam couples were considered: the amalgams underwent anodic oxidation in neutral Ringer, but a reversal phenomenon occurred in the fluorinated acid solution: Ti was damaged and the amalgams both Prs and IQC.P became the cathodic partner of the couple. In neutral fluorinated solution the IQC.P amalgam induced a significantly higher corrosion of Ti, when compared to the Prs one. CONCLUSION: Results clearly show the dependence of the Ti corrosion behaviour on the pH and composition of the solution and that the outcome of the damage is affected by the composition of other metals.

Chemical Phenomena↗

Force measurements on cell repellant and cell adhesive alginic acid coated surfaces.

The atomic force microscope (AFM) was used to acquire force versus distance curves between the cantilever tip and samples bearing a surface overlayer of covalently linked alginic acid. The alginic acid coating resists cell-adhesion in in vitro experiments involving a normal and a tumor cell line. However, the surface becomes cell adhesive when alginic acid coated samples are subjected to glow discharge treatment. Force curves show in both cases the typical features resulting from the interaction between the cantilever tip and a hydrophilic, compressible polymer overlayer, suggesting that in both cases a diffuse interface with water exists. Following some recent findings on oligoethyleneglycol-terminated self-assembled-monolayers, it is suggested that conformational and molecular aspects of hydrophilic surface layers, rather than steric repulsion effects, could play a significant role in the mechanism that controls resistance to bio-adhesion.

Journal Article↗

Evaluation of interfacial properties of hyaluronan coated poly(methylmethacrylate) intraocular lenses.

Polymethylmethacrylate intraocular lenses (IOLs) were surface-modified by the linking of a overlayer of hyaluronan. In vitro experiments show that the hydrophilic HA overlayer prevents fibroblasts adhesion and greatly reduces Staphyloccous epidermidis adhesion to the IOL surface. To gain insights into the interfacial properties of untreated and hyaluronan-coated PMMA IOLs, force-distance curves were obtained by atomic force microscopy, using standard and modified tips. These measurements allow clear appreciation of the marked difference between the mechanical and chemico-physical properties at the aqueous interface of the uncoated and hyaluronan-coated lenses.

Animals↗

Biological monitoring of occupational exposure to cyclohexane by urinary 1,2- and 1,4-cyclohexanediol determination.

OBJECTIVES: This article reports the results obtained with the biological and environmental monitoring of occupational exposure to cyclohexane using 1,2-cyclohexanediol (1,2-DIOL) and 1,4-DIOL in urine. The kinetic profile of 1,2-DIOL in urine suggested by a physiologically based pharmacokinetic (PBPK) model was compared with the results obtained in workers. METHODS: Individual exposure to cyclohexane was measured in 156 workers employed in shoe and leather factories. The biological monitoring of cyclohexane exposure was done by measurement of 1,2-DIOL and 1,4-DIOL in urine collected on different days of the working week. In all, 29 workers provided urine samples on Monday (before and after the work shift) and 47 workers provided biological samples on Thursday at the end of the shift and on Friday morning. Another 86 workers provided biological samples at the end of the work shift only on Monday or Thursday. RESULTS: Individual exposure to cyclohexane ranged from 7 to 617 mg/ m3 (geometric mean value 60 mg/m3). Urinary concentrations of 1,2-DIOL (geometric mean) were 3.1, 7.6, 13.2, and 6.3 mg/g creatinine on Monday (pre- and postshift), Thursday (postshift) and Friday (pre-shift), respectively. The corresponding values recorded for 1,4-DIOL were 2.8, 5.1, 7.8, and 3.7 mg/g creatinine. A fairly close, statistically significant correlation was found between environmental exposure to cyclohexane and postshift urinary 1,2-DIOL and 1,4-DIOL on Monday. Data collected on Thursday and Friday showed only a poor correlation to exposure with a wide scatter. Both metabolites have a urinary half-life of close to 18 h and accumulate during the working week. CONCLUSIONS: Comparison between data obtained from a PBPK model and those found in workers suggests that 1,2-DIOL and 1,4-DIOL are urinary metabolites suitable for the biological monitoring of industrial exposure to cyclohexane.

Cyclohexanes↗

Reduced plaque accumulation on hydrocarbon thin film deposited on restorative acrylic polymers.

The deposition of a thin polymeric film from ethylene plasma was used to modify the surface properties of acrylic teeth, commonly used in the dental practice for crown and bridge restorations. The effects of the surface modification process on the surface composition, morphology, and energetics were evaluated by electron spectroscopy for chemical analysis, atomic force microscopy, and contact angle measurement respectively. Plaque accumulation on the plasma-coated and untreated material was evaluated in in vivo experiments, in which the same patient received conventional and plasma-coated restorations. The hydrocarbon-like surface of the plasma-coated restoration remained remarkably free from plaque, even in the absence of brushing. On the other hand, plaque accumulation was observed on the unmodified restoration. Results are discussed according to recent theories on bioadhesive phenomena.

Acrylates↗

Organic surface chemistry on titanium surfaces via thin film deposition.

In order to develop a synthetic strategy for the fine tuning of the interfacial properties of titanium-based implants and implant parts, a thin polymeric film was deposited from ethylene plasma on the surfaces of Ti foils. The intended aim was to further modify the adherent, delamination-resistant organic coating using the techniques of surface modification of polymers to direct interfacial interactions at the metal foil-biological phase interface. In particular, air-plasma treatment and Ce(IV)-induced hydroxyethylmethacrylate grafting, two typical reactions of biomedical polymers surface chemistry, were used to improve cell adhesion or to impart cell resistance to the plasma-coated Ti. Results indicate that a plasma-deposited thin polymeric film effectively can act as a viable substrate for further surface chemical modifications and allow the application of a huge background of surface-modification polymers to metallic devices.

Animals↗

Bacterial adhesion to polymer surfaces: a critical review of surface thermodynamic approaches.

This paper presents a review of the theories based on wetting measurements/interfacial thermodynamics most frequently used to explain bacterial adhesion to solid surfaces. The physical meaning of data stemming from the application of the different theories is discussed and compared with current knowledge on interactions between components of matter. It is underlined that existing theories are either in disagreement with accepted knowledge on interfacial interactions or yield conflicting results from a quantitative point of view. It is concluded that, according to the present state of the art, no completely satisfactory theory exists, and that theoretical and experimental difficulties still hinder the understanding of the relationship between surface/interface free energy and bacterial adhesion to solid substrates. The recognition of existing shortcomings should be the first step towards a more satisfactory state of the art.

Bacterial Adhesion↗

Surface-modified polyester fabrics.

The plasma treatment of poly(ethylene terephthalate) fabric offers new opportunities for product designers. The technique enhances surface properties while maintaining the beneficial physical characteristics of the bulk material. This article compares the surface properties of treated and untreated materials and looks at the specific application of treated fabric in the rapidly growing field of tissue engineering.

Cells, Cultured↗

Anti-adhesive surfaces through hyaluronan coatings.

The ability to resist adhesion of proteins, bacteria, cells and tissue is an important requirement for the surfaces of medical devices. This article describes a surface-modification process that imparts anti-adhesive properties to the surfaces of biomedical materials through the covalent binding of hyaluronan. It can be applied to a wide range of materials to yield anti-adhesive surfaces on plastics, metals and ceramics.

Bacterial Adhesion↗

Staphylococcus epidermidis adhesion to films deposited from hydroxyethylmethacrylate plasma.

The adhesion of S. epidermidis ATCC 35984 strain on polystyrene (PS) disks coated by films deposited from hydroxyethylmethacrylate (HEMA) plasma was evaluated and compared to adhesion on untreated PS and oxygen-plasma-treated PS. Films were deposited keeping constant the monomer flow rate while the discharge power ranged from 40-100 W in order to obtain coating with different surface properties. Surface chemistry, energetics, and morphology were evaluated by Electron Spectroscopy for Chemical Analysis (ESCA), contact angle measurement, and Atomic Force Microscopy (AFM), respectively. Bacteria adhered more to the plasma-deposited or plasma-treated surfaces than to untreated PS, but no significant difference was recorded among the samples obtained using different deposition conditions. According to the surface energetic analysis, plasma-deposited and plasma-treated surfaces bear a strong Lewis-base character, so it is possible to hypothesize a marked contribution of electron donor-electron acceptor interactions to the mechanism(s) controlling adhesion between synthetic and bacterial surfaces.

Bacterial Adhesion↗