Biomedical subjects
Publications and source records attributed to C D Stout.
Cytochrome P450s display a remarkable range of conformations in parallel with activity toward a great diversity of substrates. This aspect of P450s now extends to include the dynamic behavior of the protein, as shown by recent crystal structures of Cyp51.
Sp18 is an 18 kDa protein that is released from abalone sperm during the acrosome reaction. It coats the acrosomal process where it is thought to mediate fusion between sperm and egg cell membranes. Sp18 is evolutionarily related to lysin, a 16 kDa abalone sperm protein that dissolves the vitelline envelope surrounding the egg. The two proteins were generated by gene duplication followed by rapid divergence by positive selection. Here, we present the crystal structure of green abalone sp18 resolved to 1.86 A. Sp18 is composed of a bundle of five alpha-helices with surface clusters of basic and hydrophobic residues, giving it a large dipole moment and making it extremely amphipathic. The large clusters of hydrophobic surface residues and domains of high positive electrostatic surface charge explain sp18's ability as a potent fusagen of liposomes. The overall fold of sp18 is similar to that of green abalone lysin; however, the surface features of the proteins are quite different, accounting for their different roles in fertilization. This is the first crystal structure of a protein implicated in sperm-egg fusion during animal fertilization.
Abalone sperm lysin is a non-enzymatic protein that creates a hole for sperm passage in the envelope surrounding the egg. Lysin exhibits species-specificity in making the hole and it evolves rapidly by positive selection. Our studies have focused on combining structural, biochemical, and evolutionary data to understand the mechanism of action and evolution of this remarkable protein. Currently, more is known about lysin than about any other protein involved in animal fertilization. We present an hypothesis to explain lysin's rapid evolution and the evolution of species-specific fertilization in this order of mollusks. We also propose a two-step model for lysin's action in which a dimer of lysin binds species-specifically to its glycoprotein receptor, and then monomerizes and binds the receptor in a non-species-specific manner. This experimental system yields data relevant to the general problem of molecular recognition between cell surfaces, and is also important to our thinking about how new species arise in the sea. BioEssays 23:95-103, 2001.
All naturally occurring ferredoxins that have Cys-X-X-Asp-X-X-Cys motifs contain [4Fe-4S](2+/+) clusters that can be easily and reversibly converted to [3Fe-4S](+/0) clusters. In contrast, ferredoxins with unmodified Cys-X-X-Cys-X-X-Cys motifs assemble [4Fe-4S](2+/+) clusters that cannot be easily interconverted with [3Fe-4S](+/0) clusters. In this study we changed the central cysteine of the Cys(39)-X-X-Cys(42)-X-X-Cys(45) of Azotobacter vinelandii FdI, which coordinates its [4Fe-4S](2+/+) cluster, into an aspartate. UV-visible, EPR, and CD spectroscopies, metal analysis, and x-ray crystallography show that, like native FdI, aerobically purified C42D FdI is a seven-iron protein retaining its [4Fe-4S](2+/+) cluster with monodentate aspartate ligation to one iron. Unlike known clusters of this type the reduced [4Fe-4S](+) cluster of C42D FdI exhibits only an S = 1/2 EPR with no higher spin signals detected. The cluster shows only a minor change in reduction potential relative to the native protein. All attempts to convert the cluster to a 3Fe cluster using conventional methods of oxygen or ferricyanide oxidation or thiol exchange were not successful. The cluster conversion was ultimately accomplished using a new electrochemical method. Hydrophobic and electrostatic interaction and the lack of Gly residues adjacent to the Asp ligand explain the remarkable stability of this cluster.
A crystal structure of a 108 nucleotide RNA-DNA complex containing a four-way junction was solved at 3.1 A resolution. The structure of the junction differs substantially from the "stacked-X" conformation observed previously, due to a 135 degrees rotation of the branches. Comparison of the two conformers provides insight into the factors contributing to the flexibility of four-way junctions. The stacked-X conformation maximizes base-stacking but causes unfavorable repulsion between phosphate groups, whereas the 135 degrees -rotated "crossed" conformation minimizes electrostatic clashes at the expense of reduced base-stacking. Despite the large rotation of the branches, both junction structures exhibit an antiparallel arrangement of the continuous strands and opposite polarity of the crossover strands.
The basis of the chemiosmotic theory is that energy from light or respiration is used to generate a trans-membrane proton gradient. This is largely achieved by membrane-spanning enzymes known as 'proton pumps. There is intense interest in experiments which reveal, at the molecular level, how protons are drawn through proteins. Here we report the mechanism, at atomic resolution, for a single long-range electron-coupled proton transfer. In Azotobacter vinelandii ferredoxin I, reduction of a buried iron-sulphur cluster draws in a solvent proton, whereas re-oxidation is 'gated' by proton release to the solvent. Studies of this 'proton-transferring module' by fast-scan protein film voltammetry, high-resolution crystallography, site-directed mutagenesis and molecular dynamics, reveal that proton transfer is exquisitely sensitive to the position and pK of a single amino acid. The proton is delivered through the protein matrix by rapid penetrative excursions of the side-chain carboxylate of a surface residue (Asp 15), whose pK shifts in response to the electrostatic charge on the iron-sulphur cluster. Our analysis defines the structural, dynamic and energetic requirements for proton courier groups in redox-driven proton-pumping enzymes.
The crystal structure of a 70-kilodalton ribonucleoprotein complex from the central domain of the Thermus thermophilus 30S ribosomal subunit was solved at 2.6 angstrom resolution. The complex consists of a 104-nucleotide RNA fragment composed of two three-helix junctions that lie at the end of a central helix, and the ribosomal proteins S15, S6, and S18. S15 binds the ribosomal RNA early in the assembly of the 30S ribosomal subunit, stabilizing a conformational reorganization of the two three-helix junctions that creates the RNA fold necessary for subsequent binding of S6 and S18. The structure of the complex demonstrates the central role of S15-induced reorganization of central domain RNA for the subsequent steps of ribosome assembly.
Abalone sperm lysin is a 16 kDa acrosomal protein used by sperm to create a hole in the egg vitelline envelope. Lysins from seven California abalone exhibit species-specificity in binding to their egg receptor, and range in sequence identity from 63 % to 90 %. The crystal structure of the sperm lysin dimer from Haliotis fulgens (green abalone) has been determined to 1.71 A by multiple isomorphous replacement. Comparisons with the structure of the lysin dimer from Haliotis rufescens (red abalone) reveal a similar overall fold and conservation of features contributing to lysin's amphipathic character. The two structures do, however, exhibit differences in surface residues and electrostatics. A large clustering of non-conserved surface residues around the waist and clefts of the dimer, and differences in charged residues around these regions, indicate areas of the molecule which may be involved in species-specific egg recognition.
dUTP pyrophosphatase (dUTPase) cleaves the alpha-beta phosphodiester of dUTP to form pyrophosphate and dUMP, preventing incorporation of uracil into DNA and providing the substrate for thymine synthesis. Seven crystal structures of feline immunodeficiency virus (FIV) dUTPase in three crystal forms have been determined, including complexes with substrate (dUTP), product (dUMP) or inhibitor (dUDP) bound. The native enzyme has been refined at 1.40 A resolution in a hexagonal crystal form and at 2.3 A resolution in an orthorhombic crystal form. In the dUDP complex in a cubic crystal form refined at 2.5 A resolution, the C-terminal conserved P-loop motif is fully ordered. The analysis defines the roles of five sequence motifs in interaction with uracil, deoxyribose and the alpha-, beta- and gamma-phosphates. The enzyme utilizes adaptive recognition to bind the alpha- and beta-phosphates. In particular, the alpha-beta phosphodiester adopts an unfavorable eclipsed conformation in the presence of the P-loop. This conformation may be relevant to the mechanism of alpha-beta phosphodiester bond cleavage.
Abalone sperm use lysin to make a hole in the egg's protective vitelline envelope (VE). When released from sperm, lysin first binds to the VE receptor for lysin (VERL) then dissolves the VE by a non-enzymatic mechanism. The structures of the monomeric and dimeric forms of Haliotis rufescens (red abalone) lysin, previously solved at 1.90 and 2.75 A, respectively, have now been refined to 1.35 and 2.07 A, respectively. The monomeric form of lysin was refined using previously obtained crystallization conditions, while the dimer was solved in a new crystal form with four molecules (two dimers) per asymmetric unit. These high-resolution structures reveal alternate residue conformations, enabling a thorough analysis of the conserved residues contributing to the amphipathic nature of lysin. The availability of five independent high-resolution copies of lysin permits comparisons leading to insights on the local flexibility of lysin and alternative conformations of the hypervariable N-terminus, thought to be involved in species-specific receptor recognition. The new analysis led to the discovery of the basic nature of a cleft formed upon dimerization and a patch of basic residues in the dimer interface. Identification of these features was not possible at lower resolution. In light of this new information, a model explaining the binding of sperm lysin to egg VERL and the subsequent dissolution of the egg VE is proposed.
The [4Fe-4S](2+/+) cluster of Azotobacter vinelandii ferredoxin I (FdI) has an unusually low reduction potential (E(0')) relative to other structurally similar ferredoxins. Previous attempts to raise that E(0') by modification of surface charged residues were unsuccessful. In this study mutants were designed to alter the E(0') by substitution of polar residues for nonpolar residues near the cluster and by modification of backbone amides. Three FdI variants, P21G, I40N, and I40Q, were purified and characterized, and electrochemical E(0') measurements show that all had altered E(0') relative to native FdI. For P21G FdI and I40Q FdI, the E(0') increased by +42 and +53 mV, respectively validating the importance of dipole orientation in control of E(0'). Protein Dipole Langevin Dipole calculations based on models for those variants accurately predicted the direction of the change in E(0') while overestimating the magnitude. For I40N FdI, initial calculations based on the model predicted a +168 mV change in E(0') while a -33 mV change was observed. The x-ray structure of that variant, which was determined to 2.8 A, revealed a number of changes in backbone and side chain dipole orientation and in solvent accessibility, that were not predicted by the model and that were likely to influence E(0'). Subsequent Protein Dipole Langevin Dipole calculations (using the actual I40N x-ray structures) did quite accurately predict the observed change in E(0').
The refined structure of reduced Azotobacter vinelandii 7Fe ferredoxin FdI at 100 K and 1.4 A resolution is reported, permitting comparison of [3Fe-4S]+ and [3Fe-4S]0 clusters in the same protein at near atomic resolution. The reduced state of the [3Fe-4S]0 cluster is established by single-crystal EPR following data collection. Redundant structures are refined to establish the reproducibility and accuracy of the results for both oxidation states. The structure of the [4Fe-4S]2+ cluster in four independently determined FdI structures is the same within the range of derived standard uncertainties, providing an internal control on the experimental methods and the refinement results. The structures of the [3Fe-4S]+ and [3Fe-4S]0 clusters are also the same within experimental error, indicating that the protein may be enforcing an entatic state upon this cluster, facilitating electron-transfer reactions. The structure of the FdI [3Fe-4S]0 cluster allows direct comparison with the structure of a well-characterized [Fe3S4]0 synthetic analogue compound. The [3Fe-4S]0 cluster displays significant distortions with respect to the [Fe3S4]0 analogue, further suggesting that the observed [3Fe-4S]+/0 geometry in FdI may represent an entatic state. Comparison of oxidized and reduced FdI reveals conformational changes at the protein surface in response to reduction of the [3Fe-4S]+/0 cluster. The carboxyl group of Asp15 rotates approximately 90 degrees, Lys84, a residue hydrogen bonded to Asp15, adopts a single conformation, and additional H2O molecules become ordered. These structural changes imply a mechanism for H+ transfer to the [3Fe-4S]0 cluster in agreement with electrochemical and spectroscopic results.
CD38 is a type II transmembrane glycoprotein that is expressed by many cell types including lymphocytes. Signaling through CD38 on B lymphocytes can mediate B cell activation, proliferation, and cytokine secretion. Additionally, coligation of CD38 and the B cell Ag receptor can greatly augment B cell Ag receptor responses. Interestingly, the extracellular domain of CD38 catalyzes the conversion of NAD+ into nicotinamide, ADP-ribose (ADPR), and cyclic ADPR (cADPR). cADPR can induce intracellular calcium release in an inositol trisphosphate-independent manner and has been hypothesized to regulate CD38-mediated signaling. We demonstrate that replacement of the cytoplasmic tail and the transmembrane domains of CD38 did not impair CD38 signaling, coreceptor activity, or enzyme activity. In contrast, independent point mutations in the extracellular domain of CD38 dramatically impaired signal transduction. However, no correlation could be found between CD38-mediated signaling and the capacity of CD38 to catalyze an enzyme reaction and produce cADPR, ADPR, and/or nicotinamide. Instead, we propose that CD38 signaling and coreceptor activity in vitro are regulated by conformational changes induced in the extracellular domain upon ligand/substrate binding, rather than on actual turnover or generation of products.
In Azotobacter vinelandii, deletion of the fdxA gene, which encodes ferredoxin I (FdI), leads to activation of the expression of the fpr gene, which encodes NADPH-ferredoxin reductase (FPR). In order to investigate the relationship of these two proteins further, the interactions of the two purified proteins have been examined. AvFdI forms a specific 1:1 cross-linked complex with AvFPR through ionic interactions formed between the Lys residues of FPR and Asp/Glu residues of FdI. The Lys in FPR has been identified as Lys258, a residue that forms a salt bridge with one of the phosphate oxygens of FAD in the absence of FdI. UV-Vis and circular dichroism data show that on binding FdI, the spectrum of the FPR flavin is hyperchromatic and red-shifted, confirming the interaction region close to the FAD. Cytochrome c reductase assays and electron paramagnetic resonance data show that electron transfer between the two proteins is pH-dependent and that the [3Fe-4S]+ cluster of FdI is specifically reduced by NADPH via FPR, suggesting that the [3Fe-4S] cluster is near FAD in the complex. To further investigate the FPR:FdI interaction, the electrostatic potentials for each protein were calculated. Strongly negative regions around the [3Fe-4S] cluster of FdI are electrostatically complementary with a strongly positive region overlaying the FAD of FPR, centered on Lys258. These proposed interactions of FdI with FPR are consistent with cross-linking, peptide mapping, spectroscopic, and electron transfer data and strongly support the suggestion that the two proteins are physiological redox partners.
The structure of a large nucleic acid complex formed by the 10-23 DNA enzyme bound to an RNA substrate was determined by X-ray diffraction at 3.0 A resolution. The 82-nucleotide complex contains two strands of DNA and two strands of RNA that form five double-helical domains. The spatial arrangement of these helices is maintained by two four-way junctions that exhibit extensive base-stacking interactions and sharp turns of the phosphodiester backbone stabilized by metal ions coordinated to nucleotides at these junctions. Although it is unlikely that the structure corresponds to the catalytically active conformation of the enzyme, it represents a novel nucleic acid fold with implications for the Holliday junction structure.
The nicotinamide nucleotide transhydrogenases (TH) of mitochondria and bacteria are membrane-intercalated proton pumps that transduce substrate binding energy and protonmotive force via protein conformational changes. In mitochondria, TH utilizes protonmotive force to promote direct hydride ion transfer from NADH to NADP, which are bound at the distinct extramembranous domains I and III, respectively. Domain II is the membrane-intercalated domain and contains the enzyme's proton channel. This paper describes the crystal structure of the NADP(H) binding domain III of bovine TH at 1.2 A resolution. The structure reveals that NADP is bound in a manner inverted from that previously observed for nucleotide binding folds. The non-classical binding mode exposes the NADP(H) nicotinamide ring for direct contact with NAD(H) in domain I, in accord with biochemical data. The surface of domain III surrounding the exposed nicotinamide is comprised of conserved residues presumed to form the interface with domain I during hydride ion transfer. Further, an adjacent region contains a number of acidic residues, forming a surface with negative electrostatic potential which may interact with extramembranous loops of domain II. Together, the distinctive surface features allow mechanistic considerations regarding the NADP(H)-promoted conformation changes that are involved in the interactions of domain III with domains I and II for hydride ion transfer and proton translocation.
One of the most difficult steps in the X-ray crystallography of nucleic acids is obtaining crystals that diffract to high resolution. The choice of the nucleotide sequence has proven to be more important in producing high-quality crystals than the composition of the crystallization solution. This manuscript describes a systematic procedure for identifying the optimal sizes of a multi-stranded nucleic acid complex which provide high-quality crystals. This approach was used to crystallize the in vitro evolved 10-23 DNA enzyme complexed with its RNA substrate. In less than two months, 81 different enzyme-substrate complexes were generated by combinatorial mixing and annealing of complementary oligonucleotides which differed in length, resulting in duplexes of varying length, with or without nucleotide overhangs. Each of these complexes was screened against a standard set of 48 crystallization conditions and evaluated for crystal formation. The screen resulted in over 40 crystal forms, the best of which diffracted to 2.8 A resolution when exposed to a synchrotron X-ray source.
The crystal structure of the S642A mutant of mitochondrial aconitase (mAc) with citrate bound has been determined at 1.8 A resolution and 100 K to capture this binding mode of substrates to the native enzyme. The 2.0 A resolution, 100 K crystal structure of the S642A mutant with isocitrate binding provides a control, showing that the Ser --> Ala replacement does not alter the binding of substrates in the active site. The aconitase mechanism requires that the intermediate product, cis-aconitate, flip over by 180 degrees about the C alpha-C beta double bond. Only one of these two alternative modes of binding, that of the isocitrate mode, has been previously visualized. Now, however, the structure revealing the citrate mode of binding provides direct support for the proposed enzyme mechanism.