Biomedical subjects

C F Majkrzak

Publications and source records attributed to C F Majkrzak.

7 recordsLinked to original sources

PubMed2002

Pinpointing chiral structures with front-back polarized neutron reflectometry.

A new development in spin-polarized neutron reflectometry enables us to more fully characterize the nucleation and growth of buried domain walls in layered magnetic materials. We applied this technique to a thin-film exchange-spring magnet. After first measuring the reflectivity with the neutrons striking the front, we measure with the neutrons striking the back. Simultaneous fits are sensitive to the presence of spiral spin structures. The technique reveals previously unresolved features of field-dependent domain walls in exchange-spring systems and has sufficient generality to apply to a variety of magnetic systems.

Journal Article↗

PubMed2001

Two-stage magnetization reversal in exchange biased bilayers.

MnF(2)/Fe bilayers exhibit asymmetric magnetization reversal that occurs by coherent rotation on one side of the loop and by nucleation and propagation of domain walls on the other side of the loop. Here, we show by polarized neutron reflectometry, magnetization, and magnetotransport measurements that for samples with good crystalline "quality" the rotation is a two-stage process, due to coherent rotation to a stable state perpendicular to the cooling field direction. The result is remarkably asymmetrically shaped hysteresis loops.

Journal Article↗

PubMed2001

Hydration state of single cytochrome c monolayers on soft interfaces via neutron interferometry.

Yeast cytochrome c (YCC) can be covalently tethered to, and thereby vectorially oriented on, the soft surface of a mixed endgroup (e.g., -CH3/-SH = 6:1, or -OH/-SH = 6:1) organic self-assembled monolayer (SAM) chemisorbed on the surface of a silicon substrate utilizing a disulfide linkage between its unique surface cysteine residue and a thiol endgroup. Neutron reflectivities from such monolayers of YCC on Fe/Si or Fe/Au/Si multilayer substrates with H2O versus D2O hydrating the protein monolayer at 88% relative humidity for the nonpolar SAM (-CH3/-SH = 6:1 mixed endgroups) surface and 81% for the uncharged-polar SAM (-OH/-SH = 6:1mixed endgroups) surface were collected on the NG1 reflectometer at NIST. These data were analyzed using a new interferometric phasing method employing the neutron scattering contrast between the Si and Fe layers in a single reference multilayer structure and a constrained refinement approach utilizing the finite extent of the gradient of the profile structures for the systems. This provided the water distribution profiles for the two tethered protein monolayers consistent with their electron density profile determined previously via x-ray interferometry (Chupa et al., 1994).

Biophysical Phenomena↗

PubMed2000

First-principles determination of hybrid bilayer membrane structure by phase-sensitive neutron reflectometry.

The application of a new, phase-sensitive neutron reflectometry method to reveal the compositional depth profiles of biomimetic membranes is reported. Determination of the complex reflection amplitude allows the related scattering length density (SLD) profile to be obtained by a first-principles inversion without the need for fitting or adjustable parameters. The SLD profile so obtained is unique for most membranes and can therefore be directly compared with the SLD profile corresponding to the chemical compositional profile of the film, as predicted, for example, by a molecular dynamics simulation. Knowledge of the real part of the reflection amplitude, in addition to enabling the inversion, makes it possible to assign a spatial resolution to the profile for a given range of wavevector transfer over which the reflectivity data are collected. Furthermore, the imaginary part of the reflection amplitude can be used as a sensitive diagnostic tool for recognizing the existence of certain in-plane inhomogeneities in the sample. Measurements demonstrating the practical realization of this phase-sensitive technique were performed on a hybrid bilayer membrane (self-assembled monolayer of thiahexa (ethylene oxide) alkane on gold and a phospholipid layer) in intimate contact with an aqueous reservoir. Analysis of the experimental results shows that accurate compositional depth profiles can now be obtained with a spatial resolution in the subnanometer range, primarily limited by the background originating from the reservoir and the roughness of the film's supporting substrate.

Biophysics↗

PubMed1998

Hybrid bilayer membranes in air and water: infrared spectroscopy and neutron reflectivity studies.

In this report we describe the fabrication and characterization of a phospholipid/alkanethiol hybrid bilayer membrane in air. The bilayer is formed by the interaction of phospholipid with the hydrophobic surface of a self-assembled alkanethiol monolayer on gold. We have characterized the resulting hybrid bilayer membrane in air using atomic force microscopy, spectroscopic ellipsometry, and reflection-absorption infrared spectroscopy. These analyses indicate that the phospholipid added is one monolayer thick, is continuous, and exhibits molecular order which is similar to that observed for phospholipid/phospholipid model membranes. The hybrid bilayer prepared in air has also been re-introduced to water and characterized using neutron reflectivity and impedance spectroscopy. Impedance data indicate that when moved from air to water, hybrid bilayers exhibit a dielectric constant and thickness that is essentially equivalent to hybrid bilayers prepared in situ by adding phospholipid vesicles to alkanethiol monolayers in water. Neutron scattering from these samples was collected out to a wave vector transfer of 0.25 A(-1), and provided a sensitivity to changes in total layer thickness on the order of 1-2 A. The data confirm that the acyl chain region of the phospholipid layer is consistent with that observed for phospholipid-phospholipid bilayers, but suggest greater hydration of the phospholipid headgroups of HBMs than has been reported in studies of lipid multilayers.

Lipid Bilayers↗

PubMed1996

Neutron reflectivity studies of single lipid bilayers supported on planar substrates.

Neutron reflectivity was used to probe the structure of single phosphatidylcholine (PC) lipid bilayers adsorbed onto a planar silicon surface in an aqueous environment. Fluctuations in the neutron scattering length density profiles perpendicular to the silicon/water interface were determined for different lipids as a function of the hydrocarbon chain length. The lipids were studied in both the gel and liquid crystalline phases by monitoring changes in the specularly-reflected neutron intensity as a function of temperature. Contrast variation of the neutron scattering length density was applied to both the lipid and the solvent. Scattering length density profiles were determined using both model-independent and model-dependent fitting methods. During the reflectivity measurements, a novel experimental set-up was implemented to decrease the incoherent background scattering due to the solvent. Thus, the reflectivity was measured to Q approximately 0.3 A-1, covering up to seven orders of magnitude in reflected intensity, for PC bilayers in D2O and silicon-matched (38% D2O/62% H2O) water. The kinetics of lipid adsorption at the silicon/water interface were also explored by observing changes in the reflectivity at low Q values under silicon-matched water conditions.

1,2-Dipalmitoylphosphatidylcholine↗

PubMedDate not supplied

Neutron and X-ray reflectivity studies of human serum albumin adsorption onto functionalized surfaces of self-assembled monolayers.

Neutron and X-ray reflectivity (NR and XR) have been widely used for the investigation of the structure of thin organic films. Here we demonstrate how these sensitive techniques may be applied to the study of protein adsorption to well-characterized self-assembled monolayers (SAMs) with different chemical functionalities. NR can be used for in situ study, while XR provides complementary information on the initial surfaces and dried layers measured in air after protein has been adsorbed. In situ measurements of adsorption of human serum albumin onto a hydrophilic NH2-terminated monolayer clearly show the presence of a thin layer of adsorbed protein next to the SAM. Adsorption of albumin onto a hydrophobic, deuterated, CD3-terminated SAM causes even bigger changes in the NR. Upon replacing the protein solution with protein-free buffer solution, the reflectivities from both kinds of monolayers do not change, demonstrating that the albumin adsorption is irreversible after several hours of contact with the protein solution. X-ray reflectivity measurements of dried substrates performed ex situ in air provide a lower bound estimate of the amount of protein which must be at the interface in situ. This combination of techniques provides a uniquely sensitive approach for studying changes that occur upon protein adsorption at an interface.

Adsorption↗