PubMed Health⌕ Search

Biomedical subjects

C G Hill

Publications and source records attributed to C G Hill.

15 recordsLinked to original sources
PubMed2005

Preparation of mono- and diacylglycerols by enzymatic esterification of glycerol with conjugated linoleic acid in hexane.

Esterification of glycerol with conjugated linoleic acid (CLA) was carried out in hexane. Lipase from Rhizomucor miehei provided a high degree of esterification (80%) in 8 h at 50 degrees C when used at 15% (w/w) in a system containing a 1:2 molar ratio of glycerol to free fatty acids. Esterification levels >80% were obtained in 8 h at 40 degrees C with 15% (w/w) lipase from Candida antarctica at the same molar ratio of reactants. The extent of esterification of CLA was >90% after 4 h of reaction at 50 degrees C with a 5% (w/w) loading of either R. miehei or C. antarctica lipase, together with a 1:1 molar ratio of substrates. Both enzymes incorporated the original CLA as acylglycerol residues in primarily 1,3-diacylglycerol and 1-monoacylglycerol. The CLA-rich acylglycerols can be employed as emulsifiers or as substitutes for natural fats and oils.

Chromatography, High Pressure Liquid↗
PubMed2001

Kinetics of the lipase-catalyzed synthesis of glucose esters in acetone.

A simple kinetic model derived from a ping-pong bi-bi mechanism is proposed to describe the lipase-catalyzed esterification of glucose with fatty acids. The mathematical expressions derived from this model have been tested using several sets of data obtained from reactions carried out under different reaction conditions. The predicted values provide very good fits of the experimental data for temperatures from 30 to 60 degrees C, enzyme loadings from 90 to 180 mg, and fatty acid concentrations from 0.33M to 1M. Experiments conducted at different temperatures permit one to estimate an activation energy of approximately 12 kcal/mol for the rate-limiting step of the reaction (formation of the acyl-enzyme complex). The model also considers the kinetics of inactivation of the biocatalyst during the reaction.

Acetone↗
PubMed2001

Lipolysis of butter oil by immobilized lamb pregastric esterase: I. Uniresponse kinetics-pH and temperature effects.

Lamb pregastric esterase, immobilized by physical adsorption on microporous polypropylene in a hollow fiber reactor, has been employed to effect the continuous hydrolysis of the triglycerides in butter oil. Experimental data were obtained at temperatures from 35 to 45 degrees C and pH values from 5.5 to 6.5. The overall rate of hydrolysis was fastest at 40 degrees C and a pH of 6.0. Nonlinear regression methods were employed to determine the kinetic parameters of rate expressions based on a generic Ping-Pong Bi Bi mechanism. The best nonlinear fit of the data was consistent with a mechanism that assumes that acylation of the enzyme is the rate-limiting step in the hydrolysis reaction.

Animals↗
PubMed2000

Synthesis of glycerides containing n-3 fatty acids and conjugated linoleic acid by solvent-free acidolysis of fish oil.

Menhaden oil, a rich source of n-3 fatty acids, was interesterified with conjugated linoleic acid (CLA) in a reaction medium composed solely of substrates and either free or immobilized commercial lipase preparations. Of five lipases tested, an immobilized preparation from Mucor miehei provided the fastest rate of incorporation of CLA into fish oil acylglycerols; however, and as observed with most of the lipases utilized, a significant proportion of the n-3 fatty acid residues were liberated in the process. A soluble lipase from Candida rugosa converted free CLA to acylglycerol residues while leaving the n-3 fatty acid residues virtually untouched. Even though the reaction rate was slower for this enzyme than for the other four lipase preparations, the specificity of the free C. rugosa lipase gives it the greatest potential for commercial use in preparing fish oils enriched in CLA residues but still retaining their original n-3 fatty acid residues.

Biochemistry↗
PubMed2000

Effect of pH on the production of lipolyzed butter oil by a calf pregastric esterase immobilized in a hollow-fiber reactor: II. Multiresponse kinetics.

The lipolysis of butter oil in a hollow-fiber reactor containing an immobilized calf pregastric esterase was studied at 40 degrees C and at pH values of 4.0, 5.0, 6.0, and 7.0. The concentrations of ten fatty acid species in the lipolyzed product were determined using high-performance liquid chromatography (HPLC). The relative specificity of this esterase depended on pH. Three mathematical models derived from a generalized Michaelis-Menten mechanism were tested for their ability to describe the rates of release of individual specific fatty acids. Loss of enzyme activity was modeled using first order kinetics. The models for deactivation and reaction kinetics were fit simultaneously to the data. The parameters of the model were also tested for dependence on pH. The model was successful in describing the rates of release of all ten fatty acid species for a range of space times and pH values.

Animals↗
PubMed2000

Biotechnology for the production of nutraceuticals enriched in conjugated linoleic acid: II. Multiresponse kinetics of the hydrolysis of corn oil by a Pseudomonas sp. lipase immobilized in a hollow-fiber reactor.

The hydrolysis of corn oil in the presence of a lipase from Pseudomonas sp. immobilized within the walls of a hollow-fiber reactor was studied at 30 degrees C. To assess the selectivity of this immobilized enzyme, the effluent concentrations of five different free fatty acids were measured using high-performance liquid chromatography (HPLC). Several rate expressions associated with a generic ping-pong bi-bi mechanism were used to fit the experimental data for this lipase-catalyzed reaction. A multiresponse nonlinear regression method was employed to determine the kinetic parameters associated with these rate expressions. Quasi-optimum operating conditions corresponded to 30 degrees C and a buffer pH value of 7.0. Under these conditions, the concentration of free linoleic acid (C18:2) (the fatty acid of primary interest) in the effluent oil stream for a fluid residence time of 6 h was approximately 0.5 M.

Bioreactors↗
PubMed2000

Effect of pH on the production of lipolyzed butter oil by a calf pregastric esterase immobilized in a hollow-fiber reactor: I. uniresponse kinetics.

A calf pregastric esterase immobilized in a hollow-fiber reactor was employed to hydrolyze milkfat, thereby producing a lipolyzed butteroil. The reaction kinetics can be modeled by a two-parameter model of the general Michaelis-Menten form based on a ping-pong bi-bi mechanism; the rate of enzyme deactivation can be modeled as a first-order reaction. The initial concentration of accessible glyceride bonds, [G](O), was estimated by complete saponification of the substrate butteroil as 2400 mM. An extra sum of squares test indicated that not only the parameters of the kinetic generalized Michaelis-Menten model, but also the deactivation-rate constant varied significantly with pH. The optimum pH, for lypolysis is near 6.0 at a temperature of 40 degrees C because at this pH the rate of deactivation of the esterase is minimized.

Animals↗
PubMed2000

Continuous enzymatic esterification of glycerol with (poly)unsaturated fatty acids in a packed-bed reactor.

Enzymatic synthesis of mono-, di-, and triacyglycerols from (poly)unsaturated fatty acids (linoleic, oleic, and conjugated linoleic acids) has been studied as a solvent-free reaction in a packed-bed reactor containing an immobilized lipase from Mucor miehei. The extents of the esterification reactions of interest are primarily determined by the molar ratio of glycerol to fatty acid because the presence of excess glycerol as a immiscible phase is responsible for reducing the activity of the water produced by the esterification reactions. For molar ratios of fatty acid to glycerol of less than 1.5, the percentage of the fatty acid esterified decreases quasi-linearly with an increase in this molar ratio. By appropriate manipulation of the fluid-residence time, one can control the relative proportions of the various acylglycerols in the effluent stream. At the outlet of the reactor, one observes excellent spontaneous separation of the glycerol and acylglycerol/fatty acid phases. At 50 degrees C and a fluid residence time of 1 hour, as much as 90% of the fatty acid can be esterified when the molar ratio of fatty acid to glycerol is 0.33 or less.

Bioreactors↗
PubMed2000

Interesterification (acidolysis) of butterfat with conjugated linoleic acid in a batch reactor.

Six commercial lipases, in free or immobilized form, were tested for their ability to catalyze acyl exchange between conjugated linoleic acid and anhydrous butterfat under solvent-free conditions. Immobilized Candida antarctica lipase exhibited the best activity. Experiments were conducted for this lipase in butterfat to conjugated linoleic acid ratios of 10:1 (vol/vol), temperatures from 30 to 70 degrees C, enzyme concentrations of 50 to 200 mg/g of reaction mixture, and water contents of 0.15 to 2% (wt/wt). At the maximum enzyme concentration used, equilibrium was reached within the first 24 h of reaction. The optimum temperature was 50 degrees C. The triacylglycerol profile of the product butterfat reflected changes in the relative proportions of fatty acid residues as the reaction proceeded, with increases in those triacylglycerols containing 46 to 54 carbon atoms and concomitant decreases in those triacylglycerols containing 34 to 42 carbon atoms.

Butter↗
PubMed1999

Hydrolysis of menhaden oil by a Candida cylindracea lipase immobilized in a hollow-fiber reactor.

A lipase from Candida cylindracea immobilized by adsorption on microporous polypropylene fibers was used to selectively hydrolyze the saturated and monounsaturated fatty acid residues of menhaden oil at 40 degrees C and pH 7.0. At a space time of 3.5 h, the shell and tube reactor containing these hollow fibers gives a fractional release of each of the saturated and monounsaturated fatty acid residues (i.e., C14, C16, C16:1, C18:1) of ca. 88% of the corresponding possible asymptotic value. The corresponding coproduct glycerides retained over 90% of the initial residues of both eicosapentaenoic (EPA; C20:5) and docosahexaenoic (DHA; C22:6) acids. The half-life of the immobilized lipase was 170 h when the reactor was operated at the indicated (optimum) conditions. Rate expressions associated with a generic ping-pong bi-bi mechanism were used to fit the experimental data for the lipase catalyzed reaction. Both uni- and multiresponse nonlinear regression methods were employed to determine the kinetic parameters associated with these rate expressions. The best statistical fit of the uniresponse data was obtained for a rate expression, which is formally equivalent to a general Michaelis-Menten mechanism. After reparameterization, this rate expression reduced to a pseudo-first-order model. For the multiresponse analysis, a model that employed a normal distribution of the ratio of Vmax/Km with respect to the chain length of the fatty acid residues provided the best statistical fit of the experimental data.

Bioreactors↗
PubMed1992

Kinetics and mechanisms of reactions catalysed by immobilized lipases.

This review focuses on the kinetics and mechanisms of reactions catalysed by immobilized lipases. The effects of pH, temperature, and various substances on the catalytic properties of immobilized lipases and on the processes by which they are deactivated are reviewed and discussed.

Amino Acid Sequence↗
PubMed1975

Platelet adhesion and contact activation time tests on HEMA coated cellulose acetate membranes.

Surface modification of cellulose acetate dialysis membranes was carried out by 60Co radiation induced graft copolymerization of the hydrogel, hydroxyethyl methacrylate (HEMA). The degree of grafting was controlled by varying the HEMA monomer concentration in the grafting solution and the radiation dose. A continuous flow platelet adhesion test was designed which allows testing under conditions more closely approximating hemodialysis than other small scale in vitro tests. Platelet adhesion on treated membranes fell substantially with increasing surface HEMA concentration. The presence of HEMA on the membrane surface did not affect the membrane activated clotting times significantly.

Acrylates↗