Biomedical subjects

C H Lohmann

Publications and source records attributed to C H Lohmann.

44 records · Page 3Linked to original sources

PubMed1999

Ultrahigh molecular weight polyethylene particles have direct effects on proliferation, differentiation, and local factor production of MG63 osteoblast-like cells.

Small particles of ultrahigh molecular weight polyethylene stimulate formation of foreign-body granulomas and bone resorption. Bone formation may also be affected by wear debris. To determine if wear debris directly affects osteoblasts, we characterized a commercial preparation of ultrahigh molecular weight polyethylene (GUR4150) particles and examined their effect on MG63 osteoblast-like cells. In aliquots of the culture medium containing ultrahigh molecular weight polyethylene, 79% of the particles were less than 1 microm in diameter, indicating that the cells were exposed to particles of less than 1 microm. MG63 cell response to the particles was measured by assaying cell number, [3H]thymidine incorporation, alkaline phosphatase specific activity, osteocalcin production, [35S]sulfate incorporation, and production of prostaglandin E2 and transforming growth factor-beta. Cell number and [3H]thymidine incorporation were increased in a dose-dependent manner. Alkaline phosphatase specific activity, a marker of cell differentiation for the cultures, was significantly decreased, but osteocalcin production was not affected. [35S]sulfate incorporation, a measure of extracellular matrix production, was reduced. Prostaglandin E2 release was increased, but transforming growth factor-beta production was decreased in a dose-dependent manner. This shows that ultrahigh molecular weight polyethylene particles affect MG63 proliferation, differentiation, extracellular matrix synthesis, and local factor production. These effects were direct and dose dependent. The findings suggest that ultrahigh molecular weight polyethylene wear debris particles with an average size of approximately 1 microm may inhibit bone formation by inhibiting cell differentiation and reducing transforming growth factor-beta production and matrix synthesis. In addition, increases in prostaglandin E2 production may not only affect osteoblasts by an autocrine pathway but may also stimulate the proliferation and activation of cells in the monocytic lineage. These changes favor decreased bone formation and increased bone resorption as occur in osteolysis.

Alkaline Phosphatase↗

PubMed1999

Effect of surface roughness and composition on costochondral chondrocytes is dependent on cell maturation state.

During endochondral bone formation, as occurs in fracture healing, chondrocytes are one of the first cells to see an implant surface. We tested the hypothesis that chemical composition and surface roughness affect chondrocyte differentiation, matrix synthesis, and local factor production and that the nature of the response is dependent on the state of maturation of the cells. To do this, we harvested rat growth zone and resting zone chondrocytes and examined their response to smooth and rough disk surfaces manufactured from either commercially pure titanium or titanium alloy. Profilometry, scanning electron microscopy, Auger spectroscopy, and Fourier transform infrared spectroscopy were used to characterize the surfaces. Average roughness values were 0.22 microm for smooth titanium surfaces, 0.23 microm for smooth titanium alloy surfaces, 4.24 microm for rough titanium surfaces, and 3.20 microm for rough titanium alloy surfaces. Cells were grown on the different disk surfaces until the cultures had reached confluence on plastic. The effect of the surfaces was determined by assaying cell number and [3H]thymidine incorporation as measures of cell proliferation, cell layer and cell alkaline phosphatase specific activity as markers of differentiation, and collagen production and [35S]sulfate incorporation as indicators of extracellular matrix production. In addition, the synthesis of prostaglandin E2 and transforming growth factor-beta were examined to measure changes in local factor synthesis. In growth zone and resting zone cultures, cell number and [3H]thymidine incorporation were decreased on rough surfaces; however, this effect was greater on commercially pure titanium surfaces. Cell layer and cell alkaline phosphatase specific activity were decreased in resting zone cells grown on rough surfaces. Cell alkaline phosphatase specific activity in growth zone cells was decreased on rough surfaces, whereas cell layer alkaline phosphatase specific activity was increased only in growth zone cells grown on rough commercially pure titanium surfaces. Resting zone cell collagen production was decreased only on rough commercially pure titanium, whereas in growth zone cells, collagen production was increased. Increased prostaglandin E2 release into the media was found for growth zone and resting zone cell cultures on the disks with rough surfaces. The observed effect was greater on rough commercially pure titanium. Production of transforming growth factor-beta by resting zones was similarly affected, whereas an increase in its production by growth zone cells was measured only on rough commercially pure titanium. These results indicate that surface roughness affects chondrocyte proliferation, differentiation, matrix synthesis, and local factor production and that these parameters are also affected by chemical composition. Furthermore, the nature and extent of the cell response is dependent on cell maturation. The overriding variable in response to an implant material, however, appears to be roughness of the surface.

Alloys↗

PubMed1999

Surface roughness mediates its effects on osteoblasts via protein kinase A and phospholipase A2.

Earlier studies have shown that implant surface roughness influences osteoblast proliferation, differentiation, matrix synthesis and local factor production. Moreover, the responsiveness of osteoblasts to systemic hormones, such as 1,25-(OH)2D3, at the implant surface is also influenced by surface roughness and this effect is mediated by changes in prostaglandins. At present, it is not known which signaling pathways are involved in mediating cell response to surface roughness and how 1,25-(OH)2D3 treatment alters the activation of these pathways. This paper reviews a series of studies that have addressed this question. MG63 osteoblast-like cells were cultured on commercially pure titanium (cpTi) surfaces of two different roughnesses (Ra 0.54 and 4.92 microm) in the presence of control media or media containing 1,25-(OH)2D3 or 1,25-(OH)2D3 plus H8 (a protein kinase A inhibitor) or quinacrine (a phospholipase A2 inhibitor). At harvest, the effect of these treatments on cell number and alkaline phosphatase specific activity was measured. Compared to cultures grown on the smooth surface, cell number was reduced on the rough surface. 1,25-(OH)2D3 inhibited cell number on both surfaces and inhibition of protein kinase A in the presence of 1,25-(OH)2D3 restored cell number to that seen in the control cultures. Inhibition of phospholipase A2 in the presence of 1,25-(OH)2D3 caused a further reduction in cell number on the smooth surface, and partially reversed the inhibitory effects of 1,25-(OH)2D3 on the rough surface. Alkaline phosphatase specific activity was increased in cultures grown on the rough surface compared with those grown on the smooth surface; 1,25-(OH)2D3 treatment increased enzyme specific activity on both surfaces. Cultures treated with H8 and 1,25-(OH)2D3 displayed enzyme specific activity that approximated that seen in control cultures. Inhibition of phospholipase A2 also inhibited the 1,25-(OH)2D3-dependent effect on the smooth surface, but on the rough surface there was an inhibition of the 1,25-(OH)2D3 effect as well as a partial inhibition of the surface roughness-dependent effect. The results indicate that surface roughness and 1,25-(OH)2 D3 mediate their effects through phospholipase A2, which catalyzes one of the rate-limiting steps in prostaglandin E2 production. Further downstream, prostaglandin E2 activates protein kinase A.

Alkaline Phosphatase↗

PubMed1999

Implant surface characteristics modulate differentiation behavior of cells in the osteoblastic lineage.

This paper reviews the role of surface roughness in the osteogenic response to implant materials. Cells in the osteoblast lineage respond to roughness in cell-maturation-specific ways, exhibiting surface-dependent morphologies and growth characteristics. MG63 cells, a human osteoblast-like osteosarcoma cell line, respond to increasing surface roughness with decreased proliferation and increased osteoblastic differentiation. Alkaline phosphatase activity and osteocalcin production are increased. Local factor production is also affected; production of both TGF-beta 1 and PGE2 is increased. On rougher surfaces, MG63 cells exhibit enhanced responsiveness to 1,25-(OH)2D3. Prostaglandins mediate the effects of surface roughness, since indomethacin prevents the increased expression of differentiation markers in these cells.

Animals↗

PubMed1999

The effect of ultra-high molecular weight polyethylene wear debris on MG63 osteosarcoma cells in vitro.

BACKGROUND: Focal osteolysis due to ultra-high molecular weight polyethylene wear debris involves effects on both bone resorption and bone formation. METHODS: The response of MG63 osteoblast-like osteosarcoma cells to ultra-high molecular weight polyethylene wear debris isolated by enzymatic digestion of granulomatous tissue obtained from the sites of failed total hip arthroplasties was examined. Scanning electron microscopy, particle-size analysis, and Fourier transform infrared spectroscopy were used to characterize the number, morphology, size distribution, and chemical composition of the particles. Cell response was assessed by adding particles at varying dilutions to confluent cultures and measuring changes in cell proliferation (number of cells and [3H]-thymidine incorporation), osteoblast function (alkaline-phosphatase-specific activity and osteocalcin production), matrix production (collagen production and proteoglycan sulfation), and local cytokine production (prostaglandin-E2 production). RESULTS: The mean size of the particles was 0.60 micrometer, and 95 percent of the particles had a size of less than 1.5 micrometers. The number of particles per gram of tissue ranged from 1.39 to 3.38x10(9). Three of the four batches of particles were endotoxin-free. Exposure of the cells to particles of wear debris significantly increased the number of cells (p<0.05) and the [3H]-thymidine incorporation (p<0.05) in a dose-dependent manner. In contrast, the addition of particles decreased alkaline-phosphatase-specific activity and osteocalcin production. Collagen production and proteoglycan sulfation were also decreased, while prostaglandin-E2 synthesis was increased by the addition of particles. CONCLUSIONS: Ultra-high molecular weight polyethylene particles isolated from human tissue stimulated osteoblast proliferation and prostaglandin-E2 production and inhibited cell differentiation and matrix production. These results indicate that particles of wear debris inhibit cell functions associated with bone formation and that osteoblasts may produce factors in response to wear debris that influence neighboring cells, such as osteoclasts and macrophages. CLINICAL RELEVANCE: Particles of wear debris, especially ultra-high molecular weight polyethylene, have been implicated in the loosening of implants and the development of osteolysis. The present study shows that particles of ultra-high molecular weight polyethylene isolated from human tissue inhibit osteoblast functions associated with bone formation. In addition, particles of wear debris induced osteoblasts to secrete factors capable of influencing neighboring cells, such as osteoclasts and macrophages. These results suggest that osteoblasts may play a role in the cascade of events leading to granuloma formation, osteolysis, and failure of orthopaedic implants.

Adult↗

PubMed1999

Bone morphogenetic protein but not transforming growth factor-beta enhances bone formation in canine diaphyseal nonunions implanted with a biodegradable composite polymer.

BACKGROUND: The purpose of the present study was to create an effective bone-graft substitute for the treatment of a diaphyseal nonunion. METHODS: A standardized nonunion was established in the midportion of the radial diaphysis in thirty mongrel dogs by creating a three-millimeter segmental bone defect (at least 2 percent of the total length of the bone). The nonunion was treated with implantation of a carrier comprised of poly(DL-lactic acid) and polyglycolic acid copolymer (50:50 polylactic acid-polyglycolic acid [PLG50]) containing canine purified bone morphogenetic protein (BMP) or recombinant human transforming growth factor-beta (TGF-beta1), or both, or the carrier without BMP or TGF-beta1. Five groups, consisting of six dogs each, were treated with implantation of the carrier alone, implantation of the carrier with fifteen milligrams of BMP, implantation of the carrier with 1.5 milligrams of BMP, implantation of the carrier with fifteen milligrams of BMP and ten nanograms of TGF-beta1, or implantation of the carrier with ten nanograms of TGF-beta1. At twelve weeks after implantation, the radii were examined radiographically and the sites of nonunion were examined histomorphometrically. RESULTS: We found that implantation of the polylactic acid-polyglycolic acid carrier alone or in combination with ten nanograms of TGF-beta1 failed to induce significant radiographic or histomorphometric evidence of healing at the site of the nonunion. The radii treated with the carrier enriched with either 1.5 or fifteen milligrams of BMP showed significantly increased periosteal and endosteal bone formation on histomorphometric (p < 0.05) and radiographic (p < 0.02) analysis. CONCLUSIONS: Bone formation in a persistent osseous defect that is similar to an ununited diaphyseal fracture is increased when species-specific BMP incorporated into a polylactic acid-polyglycolic acid carrier is implanted at the site of the nonunion. TGF-beta1 at a dose of ten nanograms per implant did not induce a similar degree of bone formation or potentiate the effect of BMP in this model. CLINICAL RELEVANCE: The biodegradable implant containing BMP that was used in the present study to treat diaphyseal nonunion is an effective bone-graft substitute.

Absorbable Implants↗

PubMed1999

Bone and cartilage tissue engineering.

Tissue engineering of musculoskeletal tissues, particularly bone and cartilage, is a rapidly advancing field. In bone, technology has centered on bone graft substitute materials and the development of biodegradable scaffolds. Recently, tissue engineering strategies have included cell and gene therapy. The availability of growth factors and the expanding knowledge base concerning the genetics and regulation of bone formation have generated new materials for tissue-engineering applications. This information base also has benefited cartilage tissue engineering. The problems are more complex, however, and the solutions appear more elusive. Advances in scaffold design and cell culture have improved the prognosis for success.

Animals↗

PubMed1998

Response of MG63 osteoblast-like cells to titanium and titanium alloy is dependent on surface roughness and composition.

The success of an implant is determined by its integration into the tissue surrounding the biomaterial. Surface roughness and composition are considered to influence the properties of adherent cells. The aim of this study was to determine the effect of chemical composition and surface roughness of commercially pure titanium (Ti) and Ti-6A1-4V alloy (Ti-A) on MG63 osteoblast-like cells. Unalloyed and alloyed Ti disks were machined and either fine-polished or wet-ground, resulting in smooth (S) and rough (R) finishes, respectively. Standard tissue culture plastic was used as a control. Surface topography and profile were evaluated by cold field emission scanning electron microscopy and profilometry, while chemical composition was determined using Auger electron spectroscopy and Fourier transform infrared spectroscopy. The effect on the cells was evaluated 24 h postconfluence by measuring cell number, [3H]-thymidine incorporation into DNA, cell and cell layer alkaline phosphatase specific activity (ALPase), osteocalcin and collagen production, [35S]-sulfate incorporation into proteoglycan, and prostaglandin E2 (PGE2) and transforming growth factor-beta (TGF-beta) production. When compared to plastic, the number of cells was reduced on the pure Ti surfaces, while it was equivalent on the Ti-A surfaces; [3H]-thymidine incorporation was reduced on all surfaces. The stimulatory effect of surface roughness on ALPase in isolated cells and the cell layer was more pronounced on the rougher surfaces, with enzyme activity on Ti-R being greater than on Ti-A-R. Osteocalcin production was increased only on the Ti-R surface. Collagen production was decreased on Ti surfaces except Ti-R; [35S]-sulfate incorporation was reduced on all surfaces. Surface roughness affected local factor production (TGF-beta, PGE2). The stimulatory effect of the rougher surfaces on PGE2 and TGF-beta was greater on Ti than Ti-A. In summary, cell proliferation, differentiation, protein synthesis and local factor production were affected by surface roughness and composition. Enhanced differentiation of cells grown on rough vs. smooth surfaces for both Ti and Ti-A surfaces was indicated by decreased proliferation and increased ALPase and osteocalcin production. Local factor production was also enhanced on rough surfaces, supporting the contention that these cells are more differentiated. Surface composition also played a role in cell differentiation, since cells cultured on Ti-R surfaces produced more ALPase than those cultured on Ti-A-R. While it is still unknown which material properties induce which cellular responses, this study suggests that surface roughness and composition may play a major role and that the best design for an orthopaedic implant is a pure titanium surface with a rough microtopography.

Alkaline Phosphatase↗