PubMed Health⌕ Search

Biomedical subjects

C Jeffrey Brinker

Publications and source records attributed to C Jeffrey Brinker.

At least 19 recordsLinked to original sources
PubMed2006

Nanometer-thick conformal pore sealing of self-assembled mesoporous silica by plasma-assisted atomic layer deposition.

On a porous substrate, regular atomic layer deposition (ALD) not only takes place on top of the substrate but also penetrates into the internal porosity. Here we report a plasma-assisted process in which the ALD precursors are chosen to be nonreactive unless triggered by plasma, so that ALD can be spatially defined by the supply of plasma irradiation. Since plasma cannot penetrate within the internal porosity, ALD has been successfully confined to the immediate surface. This not only gives a possible solution for sealing of porous low dielectric constant films with a conformal layer of nm-scale thickness but also enables us to progressively reduce the pore size of mesoporous materials in a sub-A/cycle fashion for membrane formation.

Microscopy, Electron, Transmission↗
PubMed2006

Amphotericin B channels in phospholipid membrane-coated nanoporous silicon surfaces: implications for photovoltaic driving of ions across membranes.

The antimycotic agent amphotericin B (AmB) functions by forming complexes with sterols to form ion channels that cause membrane leakage. When AmB and cholesterol mixed at 2:1 ratio were incorporated into phospholipid bilayer membranes formed on the tip of patch pipettes, ion channel current fluctuations with characteristic open and closed states were observed. These channels were also functional in phospholipid membranes formed on nanoporous silicon surfaces. Electrophysiological studies of AmB-cholesterol mixtures that were incorporated into phospholipid membranes formed on the surface of nanoporous (6.5 nm pore diameter) silicon plates revealed large conductance ion channels ( approximately 300 pS) with distinct open and closed states. Currents through the AmB-cholesterol channels on nanoporous silicon surfaces can be driven by voltage applied via conventional electrical circuits or by photovoltaic electrical potential entirely generated when the nanoporous silicon surface is illuminated with a narrow laser beam. Electrical recordings made during laser illumination of AmB-cholesterol containing membrane-coated nanoporous silicon surfaces revealed very large conductance ion channels with distinct open and closed states. Our findings indicate that nanoporous silicon surfaces can serve as mediums for ion-channel-based biosensors. The photovoltaic properties of nanoporous silicon surfaces show great promise for making such biosensors addressable via optical technologies.

Amphotericin B↗
PubMed2006

Superhydrophobicity: drying transition of confined water.

Long-range hydrophobic interactions operating underwater are important in the mediation of many natural and synthetic phenomena, such as protein folding, adhesion and colloid stability. Here we show that rough hydrophobic surfaces can experience attractive forces over distances more than 30 times greater than any reported previously, owing to the spontaneous evaporation of the intervening, confined water. Our finding highlights the importance of surface roughness in the interaction of extended structures in water, which has so far been largely overlooked.

Hydrophobic and Hydrophilic Interactions↗
PubMed2006

Nanoporous carbon nanotubes synthesized through confined hydrogen-bonding self-assembly.

We report a simple and direct synthetic method for the preparation of nanoporous carbon nanotubes with larger pores (>10 nm) on the tube wall. The method combines the use of anodic aluminum oxide (AAO) as a template for the tube diameter and block copolymer/carbohydrates self-assembly within thin films confined inside AAO pore channels to form nanopores. It involves coating the AAO inner pore channel surface with block copolymer (polystyrene-co-poly(vinylpyridine)) and carbohydrates in dimethylformamide (DMF) solution. Drying of DMF induced microphase separation of PS-PVP and formation of ordered PS and PVP/carbohydrate domains. Within the coating, the carbohydrates stay specifically only in the pyridine domains surrounding PS domains due to the hydrogen bonding between carbohydrates and pyridine blocks. After carbonization at high temperature (>460 degrees C) in argon, PS was removed, forming the nanopores and carbohydrates, and PVP was carbonized, forming the framework of nanoporous carbon tubes within AAO channels. Removal of AAO led to the formation of individual monodisperse nanoporous carbon nanotubes with a tube wall of approximately 16 nm. The ease with which these nanoporous carbon nanotubes can be fabricated, and the ability to tune tube nanostructures and surface chemistry through the choice of block copolymers used and carbonization temperature, should facilitate investigations of their scope for practical applications.

Journal Article↗
PubMed2006

Drag reduction on a patterned superhydrophobic surface.

We present an experimental study of a low-Reynolds number shear flow between two surfaces, one of which has a regular grooved texture augmented with a superhydrophobic coating. The combination reduces the effective fluid-surface contact area, thereby appreciably decreasing the drag on the surface and effectively changing the macroscopic boundary condition on the surface from no slip to limited slip. We measure the force on the surface and the velocity field in the immediate vicinity on the surface (and thus the wall shear) simultaneously. The latter facilitates a direct assessment of the effective slip length associated with the drag reduction.

Journal Article↗
PubMed2006

Cell-directed assembly of lipid-silica nanostructures providing extended cell viability.

Amphiphilic phospholipids were used to direct the formation of biocompatible, uniform silica nanostructures in the presence of Saccharomyces cerevisiae and bacterial cell lines. The cell surfaces organize multilayered phospholipid vesicles that interface coherently with the silica host and help relieve drying stresses that develop with conventional templates. These host structures maintain cell accessibility, addressability, and viability in the absence of buffer or an external fluidic architecture. The cell surfaces are accessible and can be used to localize added proteins, plasmids, and nanocrystals. Prolonged cell viability combined with reporter protein expression enabled stand-alone cell-based sensing.

Bacillus subtilis↗
PubMed2006

Large-conductance cholesterol-amphotericin B channels in reconstituted lipid bilayers.

The antimycotic activity of amphotericin B (AmB) depends on its ability to make complexes sterols to form ion channels that cause membrane leakage. To study this phenomenon, surface pressure (pi) as a function of surface area (A) and pi-A hysteresis were measured in monolayers of AmB-cholesterol mixtures on the water-air interface. The most stable monolayers were produced from molecules of AmB and cholesterol with 2:1 stoichiometry. At this ratio, AmB and cholesterol interact to form ion channels in lipid bilayers with millisecond dwell times and conductances of 4-400 pS. The AmB-cholesterol complexes assemble in three, four, etc., subunit aggregates to form ion channels of diverse and large-conductances. Their I-V characteristics were linear over a range of +/-200 mV. The channel currents were inhibited by the addition of tetraethylammonium (TEA), potassium channel blocker, to the cis-side of the membrane. Likewise, AmB-cholesterol complexes reconstituted in membrane-coated nanoporous silicon dioxide surfaces showed single channel behavior with large amplitudes at various voltages. Large-conductance ion channels show great promise for use in biosensors on solid supports.

Amphotericin B↗
PubMed2006

Solution synthesis of germanium nanowires using a Ge2+ alkoxide precursor.

A simple solution synthesis of germanium (Ge0) nanowires under mild conditions (<400 degrees C and 1 atm) was demonstrated using germanium 2,6-dibutylphenoxide, Ge(DBP)2 (1), as the precursor where DBP = 2,6-OC6H3(C(CH3)3)2. Compound 1, synthesized from Ge(NR2)2 where R = SiMe3 and 2 equiv of DBP-H, was characterized as a mononuclear species by single-crystal X-ray diffraction. Dissolution of 1 in oleylamine, followed by rapid injection into a 1-octadecene solution heated to 300 degrees C under an atmosphere of Ar, led to the formation of Ge0 nanowires. The Ge0 nanowires were characterized by transmission electron microscopy (TEM), X-ray diffraction analysis, and Fourier transform infrared spectroscopy. These characterizations revealed that the nanowires are single crystalline in the cubic phase and coated with oleylamine surfactant. We also observed that the nanowire length (0.1-10 microm) increases with increasing temperature (285-315 degrees C) and time (5-60 min). Two growth mechanisms are proposed based on the TEM images intermittently taken during the growth process as a function of time: (1) self-seeding mechanism where one of two overlapping nanowires serves as a seed, while the other continues to grow as a wire; and (2) self-assembly mechanism where an aggregate of small rods (<50 nm in diameter) recrystallizes on the tip of a longer wire, extending its length.

Germanium↗
PubMed2006

Thermochromatism and structural evolution of metastable polydiacetylenic crystals.

Topochemically polymerized sodium 10,12-pentacosadiynoate (PCDA-Na) microcrystals show an irreversible red-to-blue chromatic transition accompanied by a distinct structural evolution upon initial thermal treatment, and show a subsequent completely reversible blue-to-red chromatic transition upon further thermal stimuli. Visible absorption spectroscopy, X-ray diffraction (XRD), and differential scanning calorimetry (DSC) are used to investigate the thermochromatic transition behavior of the polydiacetylenic microcrystals. Brief quantum mechanical geometry optimization is employed to explain the lattice dimensional change during the irreversible red-to-blue chromatic transition of the metastable polydiacetylenic crystals.

Alkynes↗
PubMed2006

Ordered nanocrystal/silica particles self-assembled from nanocrystal micelles and silicate.

Ordered gold nanocrystal/silica particles were synthesized through self-assembly of nanocrystal micelles and silicate. Depending on the use of surfactants, and the kinetic conditions of silica hydrolysis and condensation, well-shaped and irregularly-shaped silica particles were formed, inside which the nanocrystals self-organized in a face-centered cubic mesostructure.

Crystallization↗
PubMed2006

Characterization of superhydrophobic materials using multiresonance acoustic shear wave sensors.

Various superhydrophobic (SH) surfaces, with enhanced superhydrophobicity achieved by the use of nanoparticles, were characterized by a new acoustic sensing technique using multiresonance thickness-shear mode (MTSM) sensors. The MTSM sensors were capable of differentiating SH properties created by nano-scale surface features for film, exhibiting similar macroscopic contact angles.

Letter↗
PubMed2005

Synthesis of organo-silane functionalized nanocrystal micelles and their self-assembly.

We report a general method to synthesize gold nanocrystal micelles with organo-silane headgroups. The method involves encapsulation of monodisperse, hydrophobic gold nanocrystals within the core of a micelle of an amphiphilic silane precursor. Formation and stability of monodisperse gold NC micelles have been confirmed using UV-visible spectroscopy and transmission electron microscopy. Self-assembly of such nanocrystal micelles through siloxane hydrolysis and cross-linking leads to an ordered array with a face-centered-cubic mesostructure.

Crystallization↗
PubMed2005

Polydiacetylene/silica nanocomposites with tunable mesostructure and thermochromatism from diacetylenic assembling molecules.

Conjugated polydiacetylene (PDA)/silica nanocomposites with tunable mesostructures and reversible thermochromatism were synthesized through self-directed assembly of diacetylenic silanes. In contrast to the previous studies, where the PDA side chains interacted weakly through noncovalent interactions, the side chains in the present nanocomposites are covalently connected to the inorganic silica frameworks, providing control over the molecular alignment, stability, and electronic properties. Furthermore, tuning the molecular architecture (e.g., the shape and side-chain length) allows control over the mesostructure (e.g., cubic and lamellar) and chromatic response of the nanocomposites (from irreversible to partially reversible and then to completely reversible). As a result of the covalent interactions, the nanocomposites also demonstrate higher reversible chromatic transition temperatures. This work not only provides responsive robust chromatic materials toward practically reusable PDA sensors but also is of great fundamental value for the design of supramolecular assembly and the understanding of the chromatic mechanism of PDA.

Acetylene↗
PubMed2005

Investigating the interface of superhydrophobic surfaces in contact with water.

Neutron reflectivity (NR) is used to probe the solid, liquid, vapor interface of a porous superhydrophobic (SH) surface submerged in water. A low-temperature, low-pressure technique was used to prepare a rough, highly porous organosilica aerogel-like film. UV/ozone treatments were used to control the surface coverage of hydrophobic organic ligands on the silica framework, allowing the contact angle with water to be continuously varied over the range of 160 degrees (superhydrophobic) to <10 degrees (hydrophilic). NR shows that the superhydrophobic nature of the surface prevents infiltration of water into the porous film. Atomic force microscopy and density functional theory simulations are used in combination to interpret the NR results and help establish the location, width, and nature of the SH film-water interface.

Journal Article↗
PubMed2005

Quantitative SAXS analysis of oriented 2D hexagonal cylindrical silica mesostructures in thin films obtained from nonionic surfactants.

Oriented mesostructured surfactant-silica nanocomposite thin films with a 2D hexagonal mesostructure of cylindrical micelles were prepared by evaporation-induced self-assembly using two different nonionic Brij surfactants and studied by small-angle X-ray scattering in symmetric reflection (SRSAXS) and grazing incidence (GISAXS) geometries. A novel SRSAXS evaluation approach was applied that allowed a good fitting of the SRSAXS data over almost the whole range of scattering vectors. Aside from the cylinder radius and the lattice parameter, the approach provided accurate values for the polydispersity of the micelles, lattice distortions, and preferred orientation. These analyses revealed a significant rise of the micelle radius and accordingly the lattice parameter upon an increase in the ratio surfactant/SiO(2), attributable to a decrease in the solubilization of the poly(ethylene oxide) (PEO) chains by water, in agreement with Monte Carlo simulations. Furthermore, the SRSAXS analysis was successfully applied to the corresponding mesoporous films for the determination of pore sizes.

Journal Article↗
PubMed2005

Neutron reflectivity study of lipid membranes assembled on ordered nanocomposite and nanoporous silica thin films.

Single bilayer membranes of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) were formed on ordered nanocomposite and nanoporous silica thin films by fusion of small unilamellar vesicles. The structure of these membranes was investigated using neutron reflectivity. The underlying thin films were formed by evaporation induced self-assembly to obtain periodic arrangements of silica and surfactant molecules in the nanocomposite thin films, followed by photocalcination to oxidatively remove the organics and render the films nanoporous. We show that this platform affords homogeneous and continuous bilayer membranes that have promising applications as model membranes and sensors.

Lipid Bilayers↗